CS Paper Radar

OTTER - Two Transistor - One RRAM Architecture for Reliable In-Memory-Computing in 28 nm CMOS Technology

Yang Chen, Daniele Storelli, Xinyi Zhao, Ankit Bende, Paul-Philipp Manea, Oliver Artner, Arun Ashok, Kay Winterberg, Godwin Paul, Siyuan Jia, Christian Roth, Sabitha Kusuma, Michael Schiek, Vikas Rana, Dirk Wouters, Stephan Menzel, Andre Zambanini, Christian Grewing, Stefan Wiefels, Susanne Hoffmann-Eifert, John Paul Strachan, Stefan van Waasen, Regina Dittmann

cs.ET ·submitted 2026-09-08 15:37 UTC · v1

Abstract

This work presents OTTER, a 28 nm CMOS platform co-integrated with TaOx-based valence-change mechanism (VCM) RRAM, demonstrating a two-transistor-one-memristive-device (2T1R) architecture for reliable in-memory computing. The 2T1R cell combines a low-drive-current (LD) transistor and a high-drive-current (HD) transistor in parallel, providing dedicated bias paths for SET programming and RESET operation, respectively. Through systematic experimental and simulated comparison of various transistor-pairing configurations using the physical compact model JART VCM Rth, design guidelines for transistor sizing are derived, establishing the minimum RESET transistor W/L required for complete RESET as a function of the SET current compliance. The 2T1R cell is further characterized under pulse-based programming, demonstrating multilevel analog conductance tuning with narrow, well separated conductance states across six programmable levels. An analog content-addressable memory (aCAM) design based on the same 2T1R cell is additionally analyzed at the circuit level, evaluating trade-offs between top- and bottom-connected RRAM comparator configurations. A hardware implementation of compute-in-memory (CIM) multiply-and-accumulate (MAC) operations is further demonstrated on a 15 x 15 2T1R crossbar array.

Closest papers

Nearest neighbours by meaning across the whole index.

Continuous Kinetic Model of Counterion-Mediated Redox Switching in 14-Bit Molecular Memristors for Analog In-Memory Computing

cs.AR ·2026-11-02 ·Logan Larsh, Dhiman Biswas, Nazmus Saadat As-Saquib, Su-in Yi, Thirumalai Venkatesan +1 more
similarity 0.60
Abstract

Kinetic molecular memristors offer a compelling path toward high-density analog in-memory computing by achieving 14-bit precision, wherein discrete redox transitions and counterion displacements dictate non-volatile conductance across a deterministic energy landscape. However, integrating these nanoscale kinetics into macroscale circuit simulators has remained bottlenecked by derivative discontinuities and solver convergence failures. Here, we present a physics-inspired continuous kinetic model that bridges microscopic molecular transport with scalable circuit architectures. By casting discrete intramolecular states, counterion relaxation dynamics, and Marcus-Hush-Chidsey electron transfer rates into continuously differentiable state variables, we derive a robust, Spectre-compatible compact model and a matching vectorized Python solver. This work culminates in a unified computational platform to reliably predict the behavior of complex circuits built on these molecular memristors.

0.22

A Time-Based Readout for Vector-Matrix Multiplication in Fully Analog Memristive SNNs

cs.ET cs.AIcs.AR ·2026-09-10 ·Elia Mateu-Barriendos, Álvaro Gómez-Pau, Josep Rius, Daniel Arumí, Rosa Rodríguez-Montañés +1 more
published similarity 0.59
Abstract · Accepted at 2026 IEEE 33rd International Conference on Electronics, Circuits and Systems (ICECS)

Artificial neural networks rely on vector-matrix multiplications (VMMs), whose implementation in von Neumann architectures is dominated by costly data movement between memory and processing units. Spiking neural networks (SNNs) mitigate this bottleneck by performing in-memory, analog VMMs using memristive crossbar arrays. However, conventional current-mode readout circuits incur significant area and power overhead. This work proposes a fully analog readout architecture based on voltage-to-time conversion of the VMM output. By sensing the column voltage, the proposed approach avoids current-mode summing and scaling circuitry, improving area and energy efficiency. Post-layout simulations of a 10x1 SNN implemented in a 130 nm CMOS technology validate the proposed architecture, while application to a trained 64x10 SNN for digit classification further demonstrates its feasibility for SNN inference.

0.52

Power-MSE trade-off of Factorized Low-rank Approximated Computation Scheme with Memristors

eess.SP ·2026-09-24 ·Binyu Lu, Matthias Frey, Stark Draper, Jingge Zhu
similarity 0.57
Abstract

Memristor crossbars enable analog vector-matrix multiplication (VMM) which is promising for machine learning applications. Scaling matrix entries to lower memristor conductance levels reduces power consumption but increases the impact of memristor programming noise on VMM accuracy. To investigate how low-rank factorization can improve this trade-off, we extend the previously proposed factorized low-rank approximation scheme (FLAS) to support adjustable conductance scaling. We then derive closed-form MSE and power expressions for both FLAS and baseline VMM. Based on these expressions, we establish an analytical power-MSE trade-off framework to capture the coupled effects of approximation rank, replication allocation, and conductance scaling under constraints on memristor count and conductance scaling bounds. Numerical results demonstrate FLAS's power-MSE advantage across matrices with different singular value spectra. The power decomposition explains how TIA feedback resistance affect this advantage.

0.13

ReCIM-HD: A 40 nm On-Device Learning Accelerator with Hyperdimensional Computing via Importance-Based Hybrid Digital-ReRAM CIM

cs.AR cs.ET ·2026-11-18 ·Keming Fan, Chang Eun Song, Soumil Jain, Weihong Xu, Gopabandhu Hota +7 more
similarity 0.57
Abstract · ESSERC'26

ReCIM-HD is an on-device learning (ODL) accelerator that integrates gradient-free hyperdimensional computing (HDC) with resistive RAM (ReRAM)-based analog compute-in-memory (CIM). ReCIM-HD introduces three key techniques: (1) ultra-low-power HDC-based edge ODL without costly back-propagation operations; (2) non-volatile ReRAM-based storage for class hypervectors and CIM similarity search, enabling energy-efficient inference and power-gating during idle periods without data loss; and (3) a hybrid digital-analog CIM inference flow that protects a small accuracy-critical subset digitally to preserve accuracy. Additionally, it employs a Kronecker HD encoder (KE) to reduce encoding overhead and a customized instruction set architecture (ISA) to support flexible programmability. Fabricated in 40 nm, ReCIM-HD achieves 44.17 TOPS/W (hybrid mode) and 75.8 TOPS/W (ReRAM CIM mode), delivering up to 20.1x higher energy efficiency than the state-of-the-art accelerator.

0.19

RRAM circuit-enabled nonlinear precoding and bit precision analysis

eess.SP ·2026-08-15 ·Yuhao Zhang, Haifan Yin, Tao Wang, Jindiao Huang, Kewei Zhu
top venuetheory similarity 0.56
Abstract · 15 pages, 13 figures. Accepted for publication in IEEE Transactions on Communications

The rising number of users and antennas imposes exponentially growing computational loads on future communication systems. Yet conventional processors are facing a bottleneck for their nature of memory-computing separation. In-memory computing (IMC) emerges as a promising solution leveraging its intrinsic high parallelism. This work proposes an IMC architecture that employs resistive random access memory (RRAM) to reduce the computational complexity of the nonlinear Tomlinson-Harashima precoding (THP) to a linear scale. We present a computation-constraint principle for designing RRAM circuits to perform nonlinear matrix operations and construct an LQ decomposition RRAM circuit. Since the conductance of memristor is generally quantized, we perform the bit precision analysis and derive the lower bound of the Signal-to-Interference-plus-Noise Ratio (SINR) and achievable rate. Our analysis indicates that at a high Signal-to-Noise Ratio (SNR) or with a large number of antennas, each 1-bit precision increase yields 6 dB SINR gain and linear rate growth. For practical implementation, we derive the optimal bit precision to sustain SINR performance under varying system configurations. Simulation demonstrates the feasibility and accuracy of the RRAM-based circuit and our theoretical analysis. Our work proves that RRAM-based IMC holds significant potential for high-complexity nonlinear precoding, addressing the escalating computational demands for future communications.

0.35

Design Space Exploration of In-Memory Computing Implementations for Discrete Fourier Transform

eess.SP ·2026-09-18 ·Sofia Tatidis, Philip Nielsen, Liang Liu, Mojtaba Mahdavi
similarity 0.56
Abstract

Although memristor-based in-memory computing (IMC) has been widely investigated for brain-inspired neuromorphic workloads, systematic evaluations of its energy, latency, and signal-to-noise ratio (SNR) trade-offs across diverse system parameters remain scarce for classical digital signal processing (DSP). To address this gap, this paper introduces a comprehensive hardware-aware design framework for systematically mapping algorithmic workloads onto IMC architectures, using the discrete Fourier transform (DFT) as a case study. Tailored to the stringent performance requirements of a DFT accelerator for 5G orthogonal frequency-division multiplexing (OFDM) systems, we propose a novel mapping scheme that reduces energy consumption per computation by 53% compared with conventional mapping techniques. Additionally, we present a comparative study of resistive random-access memory (RRAM) and ferroelectric tunnel junction (FTJ) technologies with identical numbers of programmable states but distinct conductance ranges, demonstrating the importance of device-informed architectural co-design. By bridging the gap between emerging IMC architectures and rigid DSP constraints, this work provides a pathway toward energy-efficient edge accelerators for future wireless communication systems.

0.12

A Voltage-controlled MTJ-CMOS Neuron Emulating Tunable Izhikevich-Inspired Dynamics

cs.ET cs.ARcs.NE ·2026-09-25 ·Kayode Oluwaseyi Adebunmi, Jordan Athas, Allison Fleming, Hamed Poursiami, Giorgio A. Ascoli +3 more
similarity 0.55
Abstract

Biological neurons exhibit diverse firing dynamics that enable adaptive and stimulus-dependent signalling, yet reproducing these dynamics in hardware has remained an enduring challenge. In this work, we present an Izhikevich- inspired reconfigurable neuron that co-designs voltage-controlled magnetic tunnel junction (V-MTJ) dynamics with CMOS circuitry. The proposed architecture combines V-MTJ excitability dynamics, enabled by a tunable energy landscape, with CMOS recovery dynamics to generate five distinct neuronal firing pat- terns with different spiking, bursting and response characteristics. Our results, based on measured V-MTJ characteristics and circuit simulations using com- mercial GlobalFoundries 22-nm FD-SOI CMOS technology, show an average energy consumption of 145.44 fJ per spike. Algorithmic simulations further show that these firing dynamics reduce inference spike activity by up to 88.6% while maintaining baseline classification accuracy. These results highlight the potential of V-MTJ/CMOS reconfigurable neurons to reduce computational activity and enable compact, energy-efficient brain-inspired computing systems.

0.09

Study of Resistive Switching Dynamics and Memory States Equilibria in Analog Filamentary Conductive-Metal-Oxide/HfOx ReRAM via Compact Modeling

cs.ET ·2026-08-26 ·Matteo Galetta, Donato Francesco Falcone, Victoria Clerico, Wooseok Choi, Stephan Menzel +5 more
publishedhighly cited similarity 0.55
Abstract

Resistive Random Access Memory (ReRAM) devices offer a promising solution for next-generation non-volatile memory and neuromorphic computing systems. Yet, existing compact models fail to capture analog resistive switching behavior of ReRAM devices. This work presents an advanced physics-based compact model for analog filamentary Conductive-Metal-Oxide (CMO)/HfOx ReRAM, capable of reproducing switching characteristics over a broad range of operating conditions. Compared to the state-of-the-art, the model extends the dynamic interplay between ion migration and electron hopping, while also accounting for parasitic resistive elements. Simulations of various voltage inputs are tested to reproduce quasi-static I-V curves, SET switching kinetics under single-pulse programming conditions, and analog accumulative conductance modulation upon bipolar identical pulse streams. Additional simulations reveal the physical criterion underlying the stabilization of the CMO/HfOx-based ReRAM memory state around the equilibrium point, namely symmetry point, under pulsing conditions when a fading memory mechanism emerges. Building upon the evidence of such equilibrium stabilization under pulsing and quasi-static conditions, a procedure is established to visualize and map equilibrium memory states across different input domains. The physical model supports design optimization of switching behavior for analog neuromorphic systems and non-volatile memory architectures. It also enables accurate integrated circuit simulations with CMO/HfOx-based ReRAM technology.

0.74