CS Paper Radar

Design Space Exploration of In-Memory Computing Implementations for Discrete Fourier Transform

Sofia Tatidis, Philip Nielsen, Liang Liu, Mojtaba Mahdavi

eess.SP ·submitted 2026-09-18 09:29 UTC · v1

Abstract

Although memristor-based in-memory computing (IMC) has been widely investigated for brain-inspired neuromorphic workloads, systematic evaluations of its energy, latency, and signal-to-noise ratio (SNR) trade-offs across diverse system parameters remain scarce for classical digital signal processing (DSP). To address this gap, this paper introduces a comprehensive hardware-aware design framework for systematically mapping algorithmic workloads onto IMC architectures, using the discrete Fourier transform (DFT) as a case study. Tailored to the stringent performance requirements of a DFT accelerator for 5G orthogonal frequency-division multiplexing (OFDM) systems, we propose a novel mapping scheme that reduces energy consumption per computation by 53% compared with conventional mapping techniques. Additionally, we present a comparative study of resistive random-access memory (RRAM) and ferroelectric tunnel junction (FTJ) technologies with identical numbers of programmable states but distinct conductance ranges, demonstrating the importance of device-informed architectural co-design. By bridging the gap between emerging IMC architectures and rigid DSP constraints, this work provides a pathway toward energy-efficient edge accelerators for future wireless communication systems.

Closest papers

Nearest neighbours by meaning across the whole index.

RRAM circuit-enabled nonlinear precoding and bit precision analysis

eess.SP ·2026-08-15 ·Yuhao Zhang, Haifan Yin, Tao Wang, Jindiao Huang, Kewei Zhu
top venuetheory similarity 0.67
Abstract · 15 pages, 13 figures. Accepted for publication in IEEE Transactions on Communications

The rising number of users and antennas imposes exponentially growing computational loads on future communication systems. Yet conventional processors are facing a bottleneck for their nature of memory-computing separation. In-memory computing (IMC) emerges as a promising solution leveraging its intrinsic high parallelism. This work proposes an IMC architecture that employs resistive random access memory (RRAM) to reduce the computational complexity of the nonlinear Tomlinson-Harashima precoding (THP) to a linear scale. We present a computation-constraint principle for designing RRAM circuits to perform nonlinear matrix operations and construct an LQ decomposition RRAM circuit. Since the conductance of memristor is generally quantized, we perform the bit precision analysis and derive the lower bound of the Signal-to-Interference-plus-Noise Ratio (SINR) and achievable rate. Our analysis indicates that at a high Signal-to-Noise Ratio (SNR) or with a large number of antennas, each 1-bit precision increase yields 6 dB SINR gain and linear rate growth. For practical implementation, we derive the optimal bit precision to sustain SINR performance under varying system configurations. Simulation demonstrates the feasibility and accuracy of the RRAM-based circuit and our theoretical analysis. Our work proves that RRAM-based IMC holds significant potential for high-complexity nonlinear precoding, addressing the escalating computational demands for future communications.

0.35

Non-uniform Memory Partitioning For Low-Power Spiking Neural Networks

cs.AR ·2026-08-31 ·Simon Richter, Darío Fernández Khatiboun, Maryam Sadeghi, Milad Zamani, Farshad Moradi
top venuebenchmark similarity 0.61
Abstract · 5 pages, 3 figures, Publishes at IEEE AICAS 2025

Spiking Neural Networks (SNNs) naturally excel in processing temporally rich and sparse data. However, because of their time-stepped processing, memory access, specifically to synaptic weights stored in SRAM (static random-access memory), tends to dominate total power consumption. To address this issue, without incurring a large area overhead, we propose to leverage the greatly varying average firing rate of neurons in the network to efficiently allocate synaptic weights to an on-chip memory consisting of multiple non-uniformly sized memory banks. By assigning weights of frequently firing neurons to shallow, low-access cost memory and less actively accessed weights to deeper, high-density memories, the average power consumption of the synaptic weight memory is decreased without incurring a large area overhead. To benchmark our proposed architecture and find optimal configurations of memory arrangements, we perform an automatic exploration based on application requirements and hardware constraints. For memory designs synthesized in 28-nm CMOS technology, we show that our architecture can achieve a synaptic weight memory access power reduction of up to 61\% compared to a conventional design, with a 2.1$\times$ lower area overhead, as compared to a traditional uniformly partitioned memory bank that achieves a comparable reduction.

0.68

S-ALSA: Co-Design of Adiabatic Logic-based Sensing and Balanced Bit-Cells for Secure and Energy-Efficient MRAM

cs.AR ·2026-09-27 ·Wu Yang, Amit Degada, Himanshu Thapliyal
similarity 0.61
Abstract · 6 pages; 2026 IEEE Computer Society Annual Symposium on VLSI, July 2026

Magnetoresistive Random Access Memory (MRAM) technologies such as Spin-Transfer Torque (STT-MRAM) and Spin-Orbit Torque assisted (SOT-STT-MRAM) offer nonvolatility and low leakage, making them attractive for IoT systems. However, conventional MRAM read circuits face two fundamental challenges: high dynamic energy consumption and vulnerability to side-channel attacks caused by data-dependent current variations in Magnetic Tunnel Junctions (MTJs). This paper presents a Secured Adiabatic Logic Sense Amplifier (SALSA) that addresses both challenges simultaneously through circuit-device co-design. S-ALSA combines structural current balancing via a 4T-2MTJ bit cell, which eliminates read current asymmetry at the storage level, with dynamic power equalization via adiabatic charge recovery in the sensing circuit. The proposed architecture supports both STT-MRAM and SOT-STT-MRAM. Case studies using 4x4 MRAM macros shows up to 80% energy savings over conventional Pre-Charge Sense Amplifiers (PCSA) across IoT frequencies. Correlation Power Analysis (CPA) attacks on PRESENT-80 encryption confirm complete suppression of key leakage when S-ALSA is combined with a balanced bit cell. This work establishes a unified framework where energy efficiency and hardware security are achieved simultaneously, enabling secure and low-power IoT memory design.

0.26

An Emerging NVM-Based On-Chip Training Architecture with Non-Ideality Mitigation Through Bipolar Weight Distributions

cs.AR ·2026-09-01 ·Peng Dang, Youna Huang, Yintao He, Huawei Li
top venuebenchmark similarity 0.59
Abstract · 14 pages. Accepted for publication in IEEE Transactions on Very Large Scale Integration (VLSI) Systems

The rapid advancement of deep learning has presented significant energy efficiency challenges to the conventional von Neumann architecture. In-memory computing (IMC) architectures based on emerging non-volatile memory (eNVM) are widely regarded as a promising solution for accelerating neural network training due to their high parallelism and low power consumption. However, the intrinsic non-idealities of eNVM devices can cause conductance updates to deviate from target values, thereby limiting the performance of on-chip training. To address this challenge, this paper presents a Non-ideality Optimized eNVM Accelerator (NOVA) architecture for on-chip training. Specifically, we first fabricate a two-dimensional (2D) ferroelectric field-effect transistor (FeFET) and develop a conductance modulation behavioral model calibrated with experimental data. Building upon this device model, we propose, for the first time, a Non-ideality Avoidance Training (NAT) algorithm tailored for eNVM devices, which mitigates accuracy degradation by guiding weight convergence toward the most stable conductance regions of eNVM devices. Experimental results demonstrate that, even under severe device asymmetry, NAT improves the accuracy by an average of 15.1\% over the baseline methods across multiple benchmark tasks. Meanwhile, the NOVA achieves an average energy efficiency gain of approximately 33.58$\times$ compared with the peak energy efficiency of graphics processing units (GPUs).

0.68

FALCON: Fault-Tolerant Magnetic Tunnel Junction-Based In-Memory Stochastic Architecture for Reliability-Critical Edge AI Applications

cs.ET cs.AReess.IV ·2026-09-01 ·Farzad Razi, Mehran Moghadam, Sercan Aygun, M. Hassan Najafi, Marc Riedel
similarity 0.59
Abstract

As modern data-centric applications such as neural inference and sensor-edge analytics expand, they increasingly encounter the von Neumann memory wall, suffering from excessive data movement overhead and stringent energy constraints. In-Memory Computing (IMC) utilizing emerging non-volatile technologies, such as Magnetic Tunnel Junctions (MTJs), promises to mitigate these bottlenecks. However, conventional binary radix-based IMC architectures suffer from excessive vulnerability to process-induced variations, restricted operating margins, and thermal noise. To bridge the gap between energy efficiency and computational reliability, this work proposes FALCON, a fault-tolerant, MTJ-based in-memory arithmetic architecture integrated with Stochastic Computing (SC). By encoding numerical values into uniform bit-streams, SC naturally absorbs localized soft errors and enables the execution of an essential suite of arithmetic operations using highly compact logic primitives directly within the memory arrays. FALCON integrates a deterministic bit mapping mechanism with reconfigurable logic-in-memory (LIM) structures, eliminating the need to transfer data to external processors or area- and power-hungry random number generators. Experimental results using 14 nm FinFET technology validate the correct functionality of FALCON even under aggressive voltage scaling, severe process variation, and noise injection levels up to 30%, making it a robust framework for reliability-critical edge AI applications. We investigate the proper functionality of FALCON on morphological closing as a realistic noise-tolerant image processing case study.

0.36

Memristive-Friendly Hadamard Reservoir Computing: Structured, Multiplier-Free Recurrences at Scale

cs.AI ·2026-08-28 ·Andrea Ceni, Gianluca Milano, Carlo Ricciardi, Claudio Gallicchio
similarity 0.57
Abstract · submitted to Neurocomputing

Reservoir Computing (RC) designs Recurrent Neural Networks around a fixed, i.e., untrained, recurrent layer, and is a natural candidate for neuromorphic hardware. Memristive-friendly reservoirs derive the neuron dynamics from memristive-device kinetics, but still rely on dense recurrent matrices, which are expensive to realize physically. In this paper, we replace the dense matrix with a structured orthogonal operator, built from sign diagonals, a permutation, and a fast Walsh-Hadamard transform. The operator is multiplier-free, requires $O(N)$ parameters and $O(N\log N)$ operations per step, and is never materialized as a matrix. We instantiate it in a standard and in a memristive-friendly Echo State Network, with one binary input connection per unit. Our mathematical analysis shows that exact orthogonality yields an echo state condition that is tight in the recurrent scaling, and a noise response that is predictable at design time. Moreover, the operator mixes the whole state in a single application. Experiments on twenty classification and seven regression benchmarks, at reservoir sizes up to $N = 8192$, show that the structured models match dense orthogonal reservoirs, and achieve better mean performance than the cycle reservoir by a margin that widens with size. Furthermore, we time the recurrent step on three hardware platforms, where it is up to $50\times$ faster than a dense product and $10^4\times$ smaller in memory. Finally, we ablate the operator and measure the response to noise, quantization, device mismatch and discrete faults.

0.25

ReCIM-HD: A 40 nm On-Device Learning Accelerator with Hyperdimensional Computing via Importance-Based Hybrid Digital-ReRAM CIM

cs.AR cs.ET ·2026-11-18 ·Keming Fan, Chang Eun Song, Soumil Jain, Weihong Xu, Gopabandhu Hota +7 more
similarity 0.57
Abstract · ESSERC'26

ReCIM-HD is an on-device learning (ODL) accelerator that integrates gradient-free hyperdimensional computing (HDC) with resistive RAM (ReRAM)-based analog compute-in-memory (CIM). ReCIM-HD introduces three key techniques: (1) ultra-low-power HDC-based edge ODL without costly back-propagation operations; (2) non-volatile ReRAM-based storage for class hypervectors and CIM similarity search, enabling energy-efficient inference and power-gating during idle periods without data loss; and (3) a hybrid digital-analog CIM inference flow that protects a small accuracy-critical subset digitally to preserve accuracy. Additionally, it employs a Kronecker HD encoder (KE) to reduce encoding overhead and a customized instruction set architecture (ISA) to support flexible programmability. Fabricated in 40 nm, ReCIM-HD achieves 44.17 TOPS/W (hybrid mode) and 75.8 TOPS/W (ReRAM CIM mode), delivering up to 20.1x higher energy efficiency than the state-of-the-art accelerator.

0.19

A Time-Based Readout for Vector-Matrix Multiplication in Fully Analog Memristive SNNs

cs.ET cs.AIcs.AR ·2026-09-10 ·Elia Mateu-Barriendos, Álvaro Gómez-Pau, Josep Rius, Daniel Arumí, Rosa Rodríguez-Montañés +1 more
published similarity 0.57
Abstract · Accepted at 2026 IEEE 33rd International Conference on Electronics, Circuits and Systems (ICECS)

Artificial neural networks rely on vector-matrix multiplications (VMMs), whose implementation in von Neumann architectures is dominated by costly data movement between memory and processing units. Spiking neural networks (SNNs) mitigate this bottleneck by performing in-memory, analog VMMs using memristive crossbar arrays. However, conventional current-mode readout circuits incur significant area and power overhead. This work proposes a fully analog readout architecture based on voltage-to-time conversion of the VMM output. By sensing the column voltage, the proposed approach avoids current-mode summing and scaling circuitry, improving area and energy efficiency. Post-layout simulations of a 10x1 SNN implemented in a 130 nm CMOS technology validate the proposed architecture, while application to a trained 64x10 SNN for digit classification further demonstrates its feasibility for SNN inference.

0.51