CS Paper Radar

Preliminary Exploration of Large Models Based on Self-Supervised Learning for Health Monitoring of Power Electronic Converters

Xinyuan Liao, Xiangtian Deng, Yang Liu, Zhaobing Cai, Haoran Wang, Yi Zhang

eess.SY ·submitted 2026-10-13 10:47 UTC · v1
top venue

Abstract

Current artificial intelligence (AI) methods for power electronics converters make limited use of the abundant unlabeled data generated during real-world operation. This underexplored resource holds significant potential for advancing model performance. To address this gap, this paper presents PE-TSFM, a time-series foundation model tailored for power module health monitoring. The model adopts the PatchTST architecture combined with self-supervised learning and is trained on more than 143 million timestamps, where over 98\% of this training data is unlabeled and collected directly from an operating traction converter. In degradation classification tasks, PE-TSFM achieves an accuracy of 87\%, considerably surpassing five conventional time-series AI models whose performance ranges from 27\% to 45\%. These results demonstrate the model's strong few-shot learning capability and generalization across different operating conditions. This work promotes a shift from narrowly focused models in power electronics toward unified, scalable foundation models that can unlock value from large-scale unlabeled operational data.

Comment
Accepted by Proceedings of the 2nd Electrical Artificial Intelligence Conference, EAIC 2025

Closest papers

Nearest neighbours by meaning across the whole index.

Real-Time State-of-Health Estimation and Online Degradation Prognosis from Partial Battery Discharge Using Physics-Informed Neural Networks

cs.LG ·2026-08-14 ·Begoña Ispizua, Serio Gil-López, Leire Arrizabalaga, Ibai Laña
similarity 0.65
Abstract

With the increasing integration of renewable energy sources, energy storage systems have become essential, making the accurate estimation of their State of Health (SOH) and degradation behavior critical. In this work, we propose a physics-informed deep learning approach for lithium-ion battery SOH prediction using incomplete discharge curves extracted from arbitrary voltage ranges, thereby reflecting realistic and heterogeneous operating conditions. The proposed method combines data-driven learning with physically motivated degradation dynamics to ensure consistent and reliable SOH estimation from partial discharge information, achieving a MAPE below 4$\%$. In addition, a real-time degradation trend estimation strategy is introduced to detect key aging transitions without requiring prior knowledge or historical data, making it applicable to a wide range of batteries. Overall, our approach enables SOH estimation from arbitrary discharge segments and a real-time degradation forecast that continuously integrates all usage, overcoming previous methods that rely on fixed protocols or early, non-adaptive predictions.

0.04

Degradation-Aligned Self-Supervised Learning for State of Health Estimation of Lithium-Ion Batteries under Label Sparsity

eess.SP cs.AIcs.LG ·2026-08-17 ·Jiaqi Yao, Julia Kowal
publishedcode/data similarity 0.63
Abstract · Published version. This article is published open access under the Creative Commons Attribution 4.0 International License. The final publish…

An accurate estimation of the state of health (SOH) underpins safe and optimized use of the battery system. Although compelling, data-driven SOH estimation models typically require large amounts of high-quality labeled cycling data, while in practice such labels are often sparse in both quantity and coverage. Therefore, in this work, we propose a degradation-aligned self-supervised learning (SSL) framework based on a convolutional neural network-gated recurrent unit (CNN-GRU) model, which learns aging-consistent representations from unlabeled data through a cycle-order ranking objective as the pretext task for pretraining, thereby enabling robust SOH estimation after fine-tuning on sparsely labeled data. Test results showcase that the proposed ranking-based SSL approach proves to endow the pretrained model with degradation awareness from unlabeled data, and after fine-tuning the model can carry out accurate, robust SOH estimation, even when only an extremely limited amount of 1% of unevenly distributed labeled training data is available, where the MAE of 1.718% and RMSE of 2.329% can be achieved on the test cell. In addition, in-depth analyses are presented regarding the influences of label distribution and cross-cell robustness. We believe this work could shed new light on label-efficient SOH estimation of lithium-ion batteries, addressing a practical need in battery management.

0.38

Can Time Series Foundation Models Serve as Surrogates for Power Systems Dynamic Simulation?

cs.LG ·2026-11-06 ·Sandy Miguel, Bruno Paes Leao, Cheng Feng
publishedcode/data similarity 0.63
Abstract · Accepted for publication at NeurIPS 2026 Foundation Models for Temporal Systems Workshop

High-fidelity dynamic simulation is essential for scientific and engineering applications, but its computational cost limits large-scale scenario screening. We investigate the use of pretrained time-series foundation models (TSFMs) as computationally efficient surrogates to address this limitation. In-context learning and post-training strategies, including retrieval-augmented reference sample selection and physics-informed regularization, are considered in the investigation. Results are benchmarked against a traditional AI model representative of the state-of-the-art in the domain. Experiments using an open-source TSFM and data from a simulated 9-bus power system indicate promising results. Retrieval augmentation improves in-context learning performance, and fine-tuning leads to superior results compared to the traditional AI model, especially when including physics-informed regularization. The fine-tuned TSFMs achieve lower errors and improved computational costs compared to the traditional AI model, and a 563$\times$ speedup compared to the original physics-based simulation.

0.46

A simulation based dataset of faults and events for machine learning in power systems

eess.SY ·2026-08-20 ·Georg Kordowich, Jonathan Loebel, Julian Oelhaf, Andreas Maier, Siming Bayer +2 more
similarity 0.63
Abstract

The integration of inverter-based renewable energy sources into electric grids challenges conventional power system protection. Machine learning-based solutions can address these challenges by utilizing available data in modern smart grids. However, the lack of open datasets prevents reproducibility and fair comparisons between different approaches and their results, which hinders further progress. Therefore, this paper presents EvEMTBench, a synthetic dataset of faults and events generated using electromagnetic transient simulations. The physical plausibility of the power system simulation is ensured by validating the simulation parameters against established literature and providing comprehensive documentation of the simulation procedure. The dataset is designed for training, fine-tuning, and benchmarking machine learning models by providing synchronized point-on-wave voltage and current measurements at 9600 Hz across a diverse set of topologies and voltage levels. The inclusion of a wide range of fault and operating events allows the utilization of EvEMTBench for different tasks like incipient fault detection, fault localization, or event detection.

0.50

Intelligent Degradation Monitoring in Lithium-ion Batteries via Discharge Incremental Capacity Feature Estimation

eess.SY cs.LGeess.SP ·2026-09-19 ·Amir Madmolilvand, Farzaneh Abdollahi
similarity 0.62
Abstract

Accurate and timely detection of degradation in lithium-ion batteries is crucial to ensure safety, reliability, and longevity in high-demand applications such as electric vehicles and energy storage systems. Traditional incremental capacity (IC) analysis methods require low-current cycling for discharge measurements, limiting their practical use in real-time battery management. This paper proposes a novel neural network-based framework that predicts discharge IC features directly from charging signals, eliminating the need for low-current discharge. Trained on a comprehensive dataset of 53 battery cells cycled under diverse fast-charging protocols, the model demonstrates robust generalization ability, effectively estimating degradation indicators on unseen battery data. Among several architectures evaluated, the LSTM model provides the best balance of prediction accuracy and computational efficiency. The proposed approach enables real-time integration into Battery Management Systems (BMS), enhancing degradation monitoring without disrupting normal battery operation. This paper presents a study to bridge IC analysis with practical, fast-charging scenarios, marking a significant step towards intelligent and scalable battery health monitoring.

0.09

EvEMTBench: An Open Benchmark for Machine Learning in Power System Protection

eess.SY cs.LG ·2026-09-23 ·Julian Oelhaf, Georg Kordowich, Christian Bergler, Andreas Maier, Johann Jäger +1 more
benchmarkcode/data similarity 0.62
Abstract · 15 pages, 3 figures. Supplementary information included. Code: https://github.com/EvEMTBench/evemtbench-benchmark

Studies of machine-learning-based power system protection are difficult to compare because task definitions, measurement access, data partitions, metrics, and generalization conditions often differ. EvEMTBench addresses this gap with an open, executable, and versioned benchmark that fixes these evaluation choices while leaving model design open. Across four grids spanning 20-345 kV, it defines 12 protection and event-analysis functions instantiated as 24 scored tasks and supports structured evaluation across observability conditions, predefined distribution shifts, and zero-shot and fine-tuned cross-grid transfer. Committed partitions, leakage controls, and reproducible reporting provide a common basis for comparing future methods. A reference evaluation spanning trivial, conventional, feature-based, and deep-learning baselines shows that wider observability is not uniformly beneficial, shifted conditions can reveal failures not apparent in-distribution, and cross-grid transfer is substantially stronger for fault detection than for fault localization. Protection-relevant diagnostics identify failure modes not apparent from primary metrics alone. EvEMTBench therefore makes generalization in machine-learning-based protection an explicit and reproducible evaluation problem.

0.22

Relative Discharge Stage (RDS) Classification: A Practical Indicator of Battery Discharge Progress

cs.LG ·2026-09-23 ·Khoa Tran, Tri Le, Hung-Cuong Trinh, Hung Tran-Nam
similarity 0.61
Abstract

Accurate remaining discharge time (RDT) prediction is challenging in real-world battery applications because future load profiles are unknown and highly dynamic. To address the uncertainty of continuous RDT regression, this paper introduces Relative Discharge Stage (RDS), a battery-management indicator that represents the remaining discharge condition using five interpretable classes: Normal, Good, Moderate, Low, and Recharge Required. Unlike state of charge (SOC), which reflects the current charge level, RDS characterizes the remaining discharge process without requiring future-current information during inference. A physics-informed RDS classification framework is proposed, combining SOC estimation with lightweight temporal learning. The SOC-estimation component includes second-order ECM state and terminal-voltage prediction, hysteresis and OCV temperature correction, core-temperature estimation, and AEKF state correction, supported by OCV evaluation, online STC-ECM parameter adaptation, and pretrained neural residual-voltage correction. The measured current, terminal voltage, surface temperature, and estimated SOC are arranged into a sliding observation window and processed by a lightweight temporal convolutional network. Experiments on two public lithium-ion battery datasets demonstrate robust RDS classification, with accuracy exceeding 80% under varying load and thermal conditions.

0.04

CORD: Learning Reusable Degradation Representations Across Heterogeneous Physical Systems

cs.LG ·2026-09-30 ·Haibo Li, Zhiguo Zeng
similarity 0.61
Abstract · Preprint

Can heterogeneous physical degradation systems benefit from joint pretraining and move beyond system-specific prognostics toward reusable cross-system representation learning? CORD combines type-specific observation interfaces with a shared degradation backbone. Its two self-supervised objectives learn at complementary scales: Intra-Observation Structure Modeling (ISM) captures structure within observations, while Inter-Observation Dynamics Modeling (IDM) captures latent degradation evolution across observation histories. We evaluate CORD under two transfer boundaries: Pretraining-Included System Types, where downstream datasets and held-out units are unseen but their system types are represented during source pretraining, and Pretraining-Excluded System Types, where the entire turbofan-engine type is absent from pretraining. Across bearings, batteries, and cutting tools, CORD (Multi-domain) consistently improves over CORD (Single-domain) under Frozen adaptation, provides further gains under Full FT in most settings, and remains competitive with representative external baselines. Source-pretrained initialization also improves low-label adaptation to the pretraining-excluded engine type. Frozen-representation analysis further shows improved cross-unit lifecycle consistency after multi-domain pretraining. Joint pretraining across heterogeneous physical systems thus produces degradation representations reusable across devices, datasets, and system types.

0.24