CS Paper Radar

Concealed Handgun Detection using WiFi Signals

Erik Persson, David Gustafsson, Tomas Wilkinson

cs.CV ·submitted 2026-10-13 17:08 UTC · v1
dataset

Abstract

While conventional camera-based surveillance systems and metal detectors can provide a sufficient level of security when used appropriately, they have fundamental limitations that reduce their applicability. Camera-based systems are unable to detect occluded or concealed threats and metal detectors require each person to enter through a narrow opening one at a time, leading to congestion issues and limited use in large crowds. A WiFi-based security system has the potential to be a complementary modality that is able to handle occlusions or concealment and is not hindered by strict spatial configurations. In this paper, we propose use Channel State Information estimated from WiFi-signals to detect concealed handguns. To this end we collect a dataset of aligned WiFi signals and RGB images that we call the WiFire dataset. We also propose a deep learning model called WiFireNet tailored to detect concealed handguns in WiFi signals using vision-based supervision signals. Our results show that concealed handgun detection is possible in WiFi and has promise as a complementary modality to surveillance cameras and metal detectors. We release the dataset, model and code to facilitate the further research into WiFi-based handgun detection.

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-Domain Inference for Human Localization: Applying Wi-Fi RSSI Data to CSI-Trained Models

cs.CR cs.LGcs.NI ·2026-09-15 ·Ariel Duschanek-Myers, Thomas Welsh, Helmut Neukirchen
top venue similarity 0.65
Abstract

Wi-Fi signal data can be used to compromise the privacy of individuals. While many existing approaches rely on Channel State Information (CSI), collecting this data on typical IoT devices often requires elevated operating system permissions and specialized drivers. Consequently, this paper investigates the feasibility of utilizing Received Signal Strength Indicator (RSSI) data to predict human locations. RSSI was selected because it is accessible even on devices with limited user permissions, and therefore is more applicable to a wider array of IoT devices. To bypass the tedious process of obtaining training data needed to train an RSSI-based model, an existing Wi-Fi pose prediction project was used in this research. However, that project assumed CSI data as input. Therefore, we investigate the feasibility of cross-domain inference, i.e., feeding RSSI data into that existing CSI-based model. We collected an RSSI dataset, synchronized with video ground-truth of a person moving within a room, to evaluate the model's performance. This evaluation confirmed that RSSI data can predict locations with approximately 80% confidence when human movement is present. This demonstrates that a model trained on CSI data can be used to evaluate low-granularity RSSI data consisting of decibel-milliwatt (dBm) values to roughly locate people in the collection space. These results imply that a wide range of IoT devices can be used for privacy invasion in Wi-Fi-dense environments.

0.43

WiFlow: Estimating Optical Flow using WiFi Channel State Information

cs.CV ·2026-09-02 ·Thomas Weigel, Simon Kiefhaber, Fabian Portner, Matthias Hollick, Simone Schaub-Meyer
top venuecode/data similarity 0.63
Abstract

Knowing where and how fast objects are moving within a scene is important across various domains. Usually, cameras are used to capture the data necessary for this task, but adding cameras often raises privacy concerns, and the quality of captured frames is heavily influenced by lighting conditions. In this work, we explore using WiFi channel state information (CSI) instead of camera frames for optical flow estimation. We propose WiFlow, a CSI based flow estimator, a preprocessor evaluation for CSI, and three model architectures that offer different trade-offs between accuracy and complexity. Further, we create the first dataset for training and evaluating CSI-based optical flow estimators, and our experiments provide insights into key design elements for this task. Code and data are available at https://visinf.github.io/wiflow.

0.53

Physics-Informed WiFi Sensing for Robust 3D Human Pose Estimation in Mobile and Cross-Environment Settings

eess.SP ·2026-08-25 ·Kaixuan Huang, Yuanbo Chen, Guangjin Pan, Shiyi Mu, Tao Yu +2 more
similarity 0.62
Abstract · 12pages 6figures

Device-free human pose estimation using commodity WiFi signals has emerged as a promising paradigm for pervasive sensing in mobile computing systems. However, existing approaches often suffer from severe performance degradation when deployed across heterogeneous environments due to complex multipath propagation and domain shifts in wireless signals. In this paper, we present a physics-informed WiFi sensing framework for robust 3D human pose estimation under mobile and cross-environment settings. Our approach explicitly models wireless signal propagation characteristics and incorporates multipath-aware attention to capture environment-dependent signal variations. To further improve generalization, we introduce a disentangled representation learning scheme that separates pose-related features from environment-specific factors, enabling effective cross-domain adaptation without requiring extensive retraining. We implement our system using commodity WiFi devices and evaluate it on multiple public benchmarks, including Person-in-WiFi-3D and MM-Fi, as well as real-world deployments across diverse indoor environments. Experimental results demonstrate that our framework significantly improves robustness and generalization performance compared to state-of-the-art methods, particularly under cross-environment scenarios. These results highlight the potential of physics-informed wireless sensing for enabling reliable, scalable, and infrastructure-free human-centric applications in mobile computing systems.

0.12

Temporal vs Spectral Resolution in CSI Reporting for Wi-Fi ISAC

eess.SP ·2026-10-16 ·Abolfazl Zakeri, Sumit Roy, Nhan Thanh Nguyen, Markku Juntti
similarity 0.61
Abstract · Under review for publication

CSI feedback is fundamental to proposed uses of Wi-Fi sensing such as human activity recognition (HAR); but it also constitutes significant overhead as resources must be allocated away from data communications. Wi-Fi CSI extraction can be explored along two dimensions in IEEE 802.11bf: reporting intensity, i.e., temporal resolution, and number of reported subcarriers, i.e., spectral resolution. We explore periodic and IEEE 802.11bf threshold-based reporting at matched rates, and uniform decimation and block-mean grouping at matched report sizes. We further propose reporting the mean CSI accumulated since the last report. Using the 802.11bf report size as the metric, we evaluate the accuracy-cost tradeoffs on three public datasets with our proposed model, a convolutional neural network combined with a gated recurrent unit and temporal pyramid pooling. The proposed periodic reporting with mean payload and block-mean grouping improves accuracy by up to 53 percentage points at equal CSI overhead cost. Temporal resolution is generally more cost-effective than spectral resolution. With only at most 7.7% of full-CSI feedback cost, the proposed scheme achieves 96-98% of full-CSI accuracy.

0.23

XAI2CSI: Interpreting CSI with eXplainable AI for Human Activity Recognition

eess.SP ·2026-08-31 ·Idio Guarino, Alfredo Nascita, Domenico Ciuonzo, Damiano Carra, Antonio Pescapé
publishedhot direction similarity 0.59
Abstract · accepted at 22nd International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob 26)

Wi-Fi Channel State Information (CSI) has emerged as a key enabler for device-free Human Activity Recognition (HAR), enabling low-cost, unobtrusive sensing using existing communication infrastructure. However, Deep Learning (DL) models trained on CSI data often struggle to generalize across users, environments, and device setups due to the context sensitivity of wireless propagation. Despite this challenge, limited attention has been devoted to understanding model decisions and generalization failures. This paper introduces XAI2CSI, a framework that leverages eXplainable Artificial Intelligence (XAI) to analyze DL-based CSI sensing systems. XAI2CSI employs SAGE, a model-agnostic explainability method, to quantify temporal, spectral, and spatial CSI contributions to HAR decisions under nominal and cross-context evaluations on IEEE 802.11ax data. Our analysis reveals that the considered DL model exhibits limited robustness to unseen conditions due to an over-reliance on context-specific CSI patterns, causing models to misinterpret the underlying signal dynamics when deployment conditions change. The proposed methodology and findings provide a reference framework to explore alternative solutions and guide the development of robust, transparent Wi-Fi sensing systems.

0.38

Untangling the Geometry and Speed for RF Sensing Spectrograms

eess.SP cs.LG ·2026-09-22 ·Mert Torun, Darius Cuenca, Yasamin Mostofi
similarity 0.58
Abstract

A fundamental challenge in RF sensing is that Doppler signatures observed by a link entangle the target's motion with the sensing geometry, resulting in limited applicability to unconstrained real-world settings. In this paper, we establish a new foundation for physically interpretable RF sensing that disentangles reflector speed from geometry, jointly recovering the speed, geometry factor, relative amplitude, and width of each dominant Doppler ridge. More specifically, we first develop a compact parametric representation of WiFi spectrograms and establish its low-dimensional structure through a systematic computer-vision analysis of a large and diverse human-activity dataset, thereby providing a tractable foundation for learning. Building on this representation, we then design a physics-informed autoencoder whose structured bottleneck and differentiable RF forward model enforce physically meaningful estimates of reflector speed and geometry. We further introduce a synthetic-to-real training framework, eliminating the need for real WiFi training data. We extensively validate the proposed framework under both known and time-varying geometries, using both independently generated synthetic test sets and 31 real WiFi experiments. The results demonstrate the superior performance in speed and geometry extraction, robustly recovering the underlying geometry, speeds, Doppler-ridge amplitudes, and ridge widths across all settings, while substantially outperforming the strongest baselines.

0.10

Beyond Direct Sensing: Harnessing Indirect Observations from Third-Party Sensors in Vehicle Tracking

eess.SP cs.LG ·2026-09-16 ·Gaofeng Dong, Vamsi Eyunni, Pragya Sharma, Kang Yang, Mani Srivastava
similarity 0.57
Abstract · 7 pages, accepted to the 6th International Workshop on the Internet of Things for Adversarial Environments (IoTAE), IEEE MILCOM 2026

Vehicle tracking is fundamental to applications ranging from urban mobility and public safety to security and defense. Conventional tracking relies on direct access to sensors that provide strong observations such as vehicle identity and location. In practice, however, factors such as ownership, privacy, cost, and operational constraints may limit directly accessible sensors, leaving sparse observations and long tracking gaps. Meanwhile, many additional third-party sensing assets may be present across the environment but remain inaccessible at the raw-data level, preventing their direct integration into the tracking system. In this work, we investigate whether weak, indirect observations with uncertain spatial and temporal cues can complement sparse direct sensing for vehicle tracking. Specifically, we propose GrayTrack, which fuses weak anonymous events with sparse direct observations using a road-constrained particle filter. We build a CARLA-Mininet-WiFi pipeline to evaluate the system under controlled conditions, generating direct observations from accessible cameras and indirect observations from third-party cameras. Our learning-based detector achieves an F1 score of 0.989 for anonymous vehicle passages. Further, incorporating indirect third-party observations reduces trajectory RMSE by 60.1% and catastrophic track loss from 35.8% to 0.3%. These results demonstrate that GrayTrack can effectively exploit weak indirect observations to extend tracking capabilities.

0.23

Luggage re-identification: A study of strategies towards a real-world application

cs.CV cs.AI ·2026-10-29 ·Quentin Dhôte, Romaric Audigier
publishedbenchmark similarity 0.57
Abstract · 7 pages, 4 figures, 5 tables. Accepted at The 2026 IEEE International Conference on Content-Based Multimedia Indexing (IEEE CBMI)

Luggage re-identification (ReID) is a critical task in video surveillance for forensics, security or border management (suspicious or abandoned luggage recognition), as well as luggage management (lost luggage recovery). It enables the association of observations of the same luggage across disjoint camera views in complex environments such as airports, train stations and border crossing. While existing approaches primarily focus on appearance-based cropped image matching under relatively clean conditions, real-world scenarios are characterized by frequent occlusions, cluttered background and crowded scenes which significantly degrade performance. Yet, strategies leveraging the complementarity of multiple shots and views from different video streams is overlooked. In this paper, we study strategies for an end-to-end pipeline that operates from multiple video streams to detect and re-identify luggage. We evaluate different variants on a benchmark dataset acquired in real-world environments to address the questions of selecting and merging different views and shots of the same luggage as well as training on different environment datasets for an overall ReID performance improvement in practical applications.

0.27