CS Paper Radar

Context-aware Bayesian Fusion for Multimodal Object Detection

Arunachalam Venkatachalam, Mhafuzul Islam, Marwan Yusuf, David Van Hamme, Ben Stoffelen, James Foresi

cs.CV ·submitted 2026-10-13 17:10 UTC · v1

Abstract

Reliable detection of pedestrians and road users is essential for the safe operation of autonomous vehicles. However, this task becomes increasingly challenging under adverse environmental conditions, such as poor weather and low lighting, where the performance of state-of-the-art pre-trained object detectors and on-board sensors tends to degrade, which limits their effectiveness and reliability. Moreover, retraining models for each operating context imposes significant constraints due to high data requirements, computational resources, and time. Considering this, we propose a novel context-aware multimodal late fusion approach that integrates a lightweight gating network within our probabilistic calibration framework. The gating network extracts environmental context and dynamically modulates the detection outputs of pre-trained object detectors based on the inferred context, without retraining of the detectors. Our methodology is evaluated on a modified KITTI dataset, in which the camera images and lidar pointclouds are augmented for varying fog levels. Experimental results show that our approach yields an approximately 14% relative improvement over non-adaptive late fusion baselines, achieving a consistent average precision of 56% across different fog levels.

Closest papers

Nearest neighbours by meaning across the whole index.

PALIN: Pixel-Aligned LiDAR-NIR Multimodal 3D Object Detection with Benchmark

cs.CV ·2026-11-14 ·Yanan Zhang, Amit Vishnia, Chengbo Ai, Eleni Christofa, Runan Cheng +4 more
benchmark similarity 0.68
Abstract · 17 pages, including references and appendices

3D object detection is critical for intelligent transportation systems. LiDAR has been widely adopted for accurate geometric measurements; however, purely geometric representations remain ambiguous under sparse observations and occlusions, while cross-sensor multimodal fusion suffers from calibration and synchronization errors. To overcome these challenges, we leverage an Ouster LiDAR to construct PALIN (Pixel-Aligned LiDAR-NIR), a large-scale intrinsically pixel-aligned multimodal dataset jointly capturing geometry and NIR intensity, comprising approximately 8,000 annotated frames from static urban intersections and diverse mobile suburban scenes. Building upon this dataset, we propose CMambaFusion, a novel fusion framework consisting of a four-directional Cross-Mamba module for bidirectional cross-modal interaction and a Gated Concat-Mamba module for joint feature refinement. Extensive experiments demonstrate that PALIN enables effective multimodal learning, and CMambaFusion achieves superior accuracy-efficiency trade-offs over both LiDAR-only and representative fusion baselines.

0.18

SARFusion: Scene-Aware Routing Fusion for Robust Camera-LiDAR 3D Object Detection

cs.CV cs.AI ·2026-09-24 ·Yuting Zhao, Ziyi Zheng, Shuxiao Li
similarity 0.68
Abstract

Camera-LiDAR fusion has become a prevailing paradigm for 3D object detection in autonomous driving. However, existing fusion detectors often establish strong inter-modality dependencies by decoding object queries from tightly coupled multimodal representations. Under corrupted driving conditions, such dependencies make the detector vulnerable to unreliable modalities, where degraded observations may interfere with reliable modality-specific evidence and lead to suboptimal predictions. Moreover, modality reliability can vary across both global driving scenes and individual object queries, requiring adaptive fusion decisions at a finer granularity. To bridge this gap, we reformulate robust camera-LiDAR fusion as a scene-aware branch routing problem and propose SARFusion, a robust 3D object detector. Instead of producing detections from a single fused representation, SARFusion decouples object-query decoding into three parallel reasoning branches: a camera branch, a LiDAR branch, and a camera-LiDAR fusion branch. Guided by a Scene Reliability Prior estimated from the global driving context, SARFusion further incorporates object-level evidence to route each query to the most suitable branch. This query-wise routing strategy alleviates harmful cross-modal interference while preserving the benefits of multimodal fusion when complementary cues are trustworthy. On the nuScenes test set, SARFusion achieves strong performance with 72.5 mAP and 74.4 NDS. Extensive analyses demonstrate its robustness under challenging conditions, including sensor corruptions and environmental changes.

0.15

Towards robust multimodal 3D object detection via visual foundation models

cs.CV cs.RO ·2026-09-20 ·Ziying Song, Lin Liu, Hongyu Pan, Shaoqing Xu, Lei Yang +2 more
similarity 0.68
Abstract · 27 pages, 5 figures. Bilingual English-Chinese manuscript; the complete English version appears first, followed by the complete Chinese vers…

Multimodal 3D object detection is fundamental to robust perception in autonomous driving because it integrates complementary information from LiDAR and camera sensors. However, existing methods often fail to maintain robustness under out-of-distribution (OOD) corruptions caused by sensor noise, adverse weather, and environmental changes. To address this problem, we propose RoboDistill, a robust and generalizable multimodal 3D object detection framework that leverages visual foundation models (VFMs), such as the Segment Anything Model (SAM). First, we introduce SAM-AD, a domain-specific pretraining strategy that fine-tunes SAM on autonomous-driving imagery to extract feature representations with rich semantic information. Second, we design the AD Feature Pyramid Network (AD-FPN) to refine and upsample SAM features at multiple scales for seamless fusion with LiDAR features. Third, we develop the Depth-Guided Wavelet Attention (DGWA) module, which suppresses high-frequency sensor noise while preserving critical contextual information. Finally, we introduce KD Fusion, in which the pretrained SAM-AD serves as a teacher that distills high-quality visual knowledge into a lightweight point-cloud network, thereby improving robustness under noisy conditions. Extensive experiments across 27 challenging OOD corruption settings show that RoboDistill generally delivers stronger or competitive detection performance and robustness relative to representative state-of-the-art methods. This work bridges the gap between VFMs and 3D object detection and advances robust multimodal perception for real-world autonomous-driving applications.

0.21

CRUISE: Vision-Language Model-Guided Uncertainty-Aware Cross-Modal Sensor Fusion for Robust Autonomous Driving

cs.AI ·2026-08-10 ·Junyao Wang, Yulin Xu, Yu Li, Pramod Khargonekar, Mohammad Abdullah Al Faruque
similarity 0.67
Abstract

Modern autonomous vehicles are equipped with multiple sensors, such as cameras, LiDAR, and radar, for comprehensive environmental perception. However, robust cross-modal feature fusion remains a critical challenge, as the reliability of each sensor varies significantly across diverse real-world driving conditions, including poor visibility and adverse weather. While uncertainty quantification (UQ) mitigates this issue by allowing models to prioritize reliable signals, existing uncertainty-aware fusion methods typically rely on simple feature-level uncertainty estimates and thus often fail to generalize effectively in complex, out-of-distribution scenarios. To address this limitation, we propose CRUISE, a novel uncertainty-aware cross-modal sensor fusion framework. CRUISE integrates a vision-language model (VLM)-guided UQ module that generates fine-grained, pixel-level uncertainty estimates. By leveraging the VLM's rich prior knowledge and superior contextual reasoning, our approach provides a highly informative guide for the fusion process. Furthermore, we introduce a dynamic adaptive mechanism that explicitly models and captures cross-modal dependencies, ensuring the framework fully exploits the inherent complementary nature of multi-sensor inputs.

0.34

FastBEVFusion: Simple Multi-Modal Fusion for 3D Object Detection at 50 FPS

cs.CV cs.RO ·2026-10-27 ·Tom Sanitz, Emre Gülsoylu, Simone Frintrop, Christian Wilms
published similarity 0.66
Abstract · Accepted at Iberian Robotics Conference (ROBOT2026)

Reliable real-time 3D object detection based on LiDAR and camera data is critical for safety in autonomous driving, where systems must accurately perceive their surroundings with minimal latency. Many state-of-the-art systems achieve high-quality detection results but fail to meet real-time constraints, limiting their practical use. To address this challenge, we propose FastBEVFusion, a simple, fast, and robust fusion system for 3D object detection. Based on modality-specific features, FastBEVFusion projects these features into semi-aligned modality-specific BEV spaces, without relying on a computationally intensive and potentially error-prone depth estimation. Given these BEV spaces, we propose a light-weight, soft, and dynamic fusion module based on cross-attention, which adapts dynamically to the scene context and enables feature fusion across the entire BEV spaces. Experiments on the complex nuScenes dataset show that FastBEVFusion outperforms state-of-the-art real-time systems, and achieves over 50 FPS without deployment libraries. Additionally, our system shows strong robustness to calibration errors, making FastBEVFusion a powerful 3D object detection system for real-world applications.

0.28

DAC-MACE: Context-Conditioned Expert Routing for Compact Scene Coordinate Regression in Camera Relocalization

cs.CV ·2026-11-06 ·Dingying Fan, Mingkai Liu, Haohua Que, Haojia Gao, Xianliang Huang +3 more
similarity 0.66
Abstract · 10 pages, 6 figures. Submitted to IEEE Sensors Journal

A camera becomes an absolute pose sensor when its images can be relocalized against a prebuilt map of the scene. On mobile robots and augmented-reality devices, that map must be small and quick to build. Scene coordinate regression (SCR) stores the scene in a compact network that predicts a 3D coordinate for every pixel, and mixture-of-experts (MoE) variants extend its capacity to larger outdoor scenes. In existing MoE-based SCR, however, the router assigns each pixel to an expert from the same local descriptor that the experts regress from, so repeated facades and windows at different locations receive similar routing inputs. We present DAC-MACE, which conditions soft expert routing on recalibrated and contextualized features. A residual context adapter (RCA) reweights the channels and locations of frozen encoder features, a global context encoder (GCE) mixes them with multi-scale self-attention, and an image-level pooled descriptor is added to the router input. A dual-threshold RANSAC--Levenberg--Marquardt estimator recovers the pose. On Cambridge Landmarks, DAC-MACE attains a mean per-scene median translation error of 13.0 cm over three seeds, the lowest among the RGB-only SCR methods compared (GLACE 13.6 cm, MACE 14.4 cm), and reduces the error on the largest scene from 24 to 19 cm relative to MACE. In a cumulative study, the MoE head, GCE, RCA, and the dual-threshold estimator lower the mean error from 17.0 cm to 14.4, 14.0, 13.6, and 13.0 cm. On 7-Scenes, adding GCE to a single ACE head raises Recall@(5 cm, 5$^\circ$) from 86.56% to 87.60%.

0.30

Real-World Perception for Autonomous Driving in Adverse Weather: Enhancing Standard Detectors via Foundation-Guided Auto-Annotation

cs.CV ·2026-09-22 ·Sepideh Gohari, Goodarz Mehr, Azim Eskandarian
benchmark similarity 0.65
Abstract · Submitted to IEEE for review

Standard deployment-ready object detectors for autonomous vehicles degrade in adverse weather and lighting conditions without being trained on extensive domain-specific data. While large-scale vision foundation models offer robust zero-shot generalization, their high computational cost makes them impractical for real-time deployment. To bridge this gap, we propose a foundation-guided auto-annotation pipeline that enhances standard detectors without architectural changes. We first benchmark three distinct models, YOLOv8, Co-DETR, and SAM3, on our custom real-world driving dataset spanning 25 unique operational scenarios across various route, weather, and lighting conditions. Based on our analysis, SAM3 demonstrates superior accuracy and resilience across all scenarios. Thus, we deploy it as an offline auto-annotator to generate pseudo-labels on the unannotated subset of our dataset. Fine-tuning the baseline YOLOv8 on these annotations yields a 16.04% higher overall mean Average Precision (mAP) and improves cross-environmental stability compared to the baseline model, highlighted by a 32.73% and 28.65% mAP increase in Residential Direct Sunlight and Highway Fog, respectively. These results demonstrate that standard detectors can achieve environmental resilience without the need for extensive manual annotation or architectural modifications.

0.20

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.65
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25