CS Paper Radar

On the Investigation of Antenna Beam Pattern Models for Fast Beam Placement in LEO Satellite Networks

Ninh Thi-Thanh Tam, Nguyen Viet Anh, Nguyen Minh Quan, Trinh Van Chien

cs.IT ·submitted 2026-10-13 10:39 UTC · v1
published

Abstract

In this paper, we investigate the impact of antenna beam pattern models on the beam placement problem in Low Earth Orbit (LEO) satellite networks. Unlike conventional beam placement studies that often rely on a fixed antenna pattern or a predefined half-power beamwidth, this work compares four representative gain models, namely the Bessel $J_1$ model, the combined Bessel $J_1+J_3$ model, the Gaussian model, and a 3GPP-TR 37.842 model. For each antenna pattern, the corresponding half-power angle is obtained and used to construct a user compatibility graph. The beam placement problem is then transformed into a Minimum Clique Cover problem and solved using a graph coloring-based algorithm. Numerical results compare the considered antenna models in terms of the number of active beams, load balancing, statistical channel gain-to-noise ratio (SCGNR), and signal-to-interference-plus-noise ratio (SINR). We analyze the impact of increasing the number of active beams on SINR-based spectral efficiency to explain the importance of carefully controlling the number of active beams. The results show that antenna beam pattern models affect both beam resource usage and link quality, highlighting the need for antenna-pattern-aware beam placement in LEO satellite networks.

Comment
6 pages, 7 figures. Accepted by ATC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Satellite Infrastructure Sharing: Orbit-Structured Stochastic Geometry Modeling and Connectivity Analysis in Heterogeneous Satellite Networks

cs.IT eess.SPmath.PR ·2026-08-12 ·Chang-Sik Choi
top venue similarity 0.59
Abstract · submitted to IEEE Transactions on Wireless Communications

This paper develops an analytical framework to evaluate the feasibility and performance of satellite infrastructure sharing among multiple low Earth orbit (LEO) satellite operators. Motivated by the growing demand for universal connectivity under limited satellite resources, the proposed model captures uncoordinated deployments where independently operated constellations coexist without predefined orbital agreements. To describe such heterogeneous configurations, the spherical Cox point process is employed to jointly generate orbital structures and satellites. Then, each satellite is further assigned a random communication range, reflecting variations in coverage capability across operators. The overall coverage region is modeled through a spherical Cox-Boolean model that captures the spatial overlap of individual satellite spherical footprints on Earth. Using the proposed framework, the feasibility and benefits of satellite infrastructure sharing are mathematically analyzed, and closed-form expressions are derived for key performance metrics such as the connection probability, connection number, and downlink signal characteristics including the nearest serving distance, total received signal power, and the signal-to-interference ratio (SIR) distribution in the interference-limited regime. The analytical results, validated through system-level simulations, provide a tractable characterization of how orbital geometry governs coverage, connectivity, and interference, and reveal the inherent trade-offs induced by coverage overlap in heterogeneous satellite constellations.

0.29

Modeling and Performance Evaluation of Distributed Satellite Antennas: Space Is Much Closer Than One Might Think

cs.IT ·2026-10-07 ·Giacomo Bacci, Riccardo De Gaudenzi, Marco Luise, Luca Sanguinetti
similarity 0.59
Abstract · currently submitted to IEEE Transactions on Aerospace and Electronics Systems (14 figures, 1 table)

Distributed satellites can deliver broadband connectivity directly to commercial handsets. In the formation of arrays (FoA) architecture, cooperating satellites synthesize a large aperture whoseextent depends on their number, arrangement, and spacing, with intersatellite distances ranging from tens of meters to hundreds of kilometers. For representative S-band geostationary and low-Earth-orbit configurations, the Fraunhofer distance may exceed the nadir link range at spacings on the order of a hundred meters. Therefore, accurate assessment of FoA performance across satellite populations and spacings requires spherical-wave modeling for users in the radiative near field, below the formation's Fraunhofer distance. Planar models of satellite positions, array orientations, and user locations must also be assessed against spherical geometries accounting for orbital and Earth curvature. This paper combines these models to quantify how simplifying assumptions affect throughput and outage probability. Numerical results show that multi-antenna precoding based on a local plane-wave approximation within each satellite array closely matches the spherical-wave reference. A global plane-wave approximation can instead cause severe losses, including full outage. In the investigated scenarios, formation curvature has little impact, whereas neglecting Earth curvature overestimates low-Earth-orbit throughput. These findings clarify when geometric and propagation approximations remain reliable and demonstrate that, for large distributed antenna apertures, space is much closer than one might think.

0.21

Intra-Cell Spatial Reuse in LEO Downlinks: Beam-Leakage-Aware Satellite Scheduling

eess.SP ·2026-11-04 ·Shizhen Jia, Hao Guo, Ruoyu Sun, Hans Geerdes, Mark Poletti +3 more
theoryhot direction similarity 0.57
Abstract

Dense low-earth-orbit (LEO) constellations offer an opportunity to increase local broadband capacity by serving multiple terminals in the same cell through concurrent satellite beams. However, interference between overlapping beams limits spatial reuse, and satellite selection based solely on link strength or angular separation may result in suboptimal performance. This paper proposes beam-leakage-aware satellite scheduling for Ku-band LEO downlink transmissions. With matched transmit and receive beamforming, we formulate a fixed-cardinality sum-rate maximization problem that jointly accounts for satellite-dependent received powers and pairwise receive-array leakage. A beam-leakage-aware branch-and-bound (BL-BnB) algorithm combines an admissible upper bound with greedy-plus-swap initialization to obtain globally optimal schedules for the reference-point model. We evaluate the method using a 24-h ephemeris-derived Starlink visibility trace with antenna and transmit-power models calibrated to public SpaceX filings. The results show that total capacity increases with beam count, but less than proportionally. With eight concurrent beams, BL-BnB improves mean per-beam capacity by 27.2% over nearest-satellite selection, primarily benefiting weaker links. BL-BnB achieves millisecond-scale runtimes in our evaluation, supporting the computational feasibility of optimal scheduling.

0.28

Load Balancing in Multi-Shell LEO Satellite Networks with Successive Interference Cancellation

eess.SP ·2026-09-10 ·Seyong Kim, Jeonghun Park, Jeffrey G. Andrews
similarity 0.56
Abstract · https://info.arxiv.org/help/prep#comments

Multi-shell low Earth orbit (LEO) networks can increase service opportunities, but altitude-dependent propagation can concentrate traffic on lower shells and create strong inter-shell interference under full frequency reuse. This paper develops a mathematical framework for load balancing in multi-shell LEO satellite networks. Satellites on each shell form an independent spherical Poisson point process (SPPP), and the typical user associates with one of the per-shell serving satellites through a shell-dependent biased received-power rule, with receiver-side successive interference cancellation (SIC) under full frequency reuse. Shell-wise association probabilities, conditioned serving-distance distributions, and the rate coverage probability under shell-dependent traffic loads are derived and validated by simulation. The results show that shell-dependent biasing alleviates lower-shell traffic concentration and improves rate coverage, while receiver-side SIC mitigates the dominant lower-shell interference experienced by users associated with upper shells. Load balancing provides its largest rate-coverage gain in traffic hotspots, while SIC becomes more valuable as receive-side isolation weakens. With a fixed satellite budget, distributing satellites across multiple shells can further improve hotspot rate coverage by adding shell-wise serving opportunities.

0.25

User Association and Transmit Beamforming for Rotatable Antenna-Enabled LAE Networks

eess.SP ·2026-09-28 ·Bowen Yao, Chao Zhang, Ying-Chang Liang
similarity 0.52
Abstract

This paper investigates rotatable antenna (RA)-enabled low-altitude economy (LAE) networks, where multiple base stations (BSs) are deployed to serve both terrestrial and aerial users. Unlike conventional fixed orientation antennas, RAs can adjust their boresights to serve users at diverse azimuth and elevation angles, thereby providing three-dimensional (3D) coverage. To improve the performance of LAE networks, we formulate a network sum-rate maximization problem that jointly optimizes user association, transmit beamforming, and RA orientations. However, in such LAE networks, aerial users are often visible to multiple BSs through line-of-sight (LoS) links, making user association and interference management particularly challenging. Moreover, user association and RA orientations are closely coupled: user association affects the RA pointing directions, while the RA orientations in turn reshape the channel conditions for user association. To solve this problem, we propose an alternating optimization (AO) algorithm that integrates weighted minimum mean-square error (WMMSE) for transmit beamforming, projected gradient ascent updates for user association, and Frank-Wolfe updates for RA orientations. Furthermore, we develop a discrete candidate-scanning scheme that replaces continuous orientation optimization with a finite search to reduce computational complexity. We also propose an antenna block-based scheme to reduce the number of orientation variables. Simulation results show that the proposed joint design achieves a higher sum-rate than the fixed antenna orientation and nearest BS association benchmarks. Moreover, the candidate-scanning and block-based schemes achieve approximately 89.9% and 94.3% of the performance with high transmit power, respectively, while reducing the complexity of orientation updates.

0.17

Finite-Aperture Modeling of Pattern-Reconfigurable Antennas for Multiuser Beamforming

eess.SP ·2026-10-07 ·Kangjian Chen, Han Qing Yang, Hang Wong
similarity 0.52
Abstract · 14 pages, 11 figures; submitted to IEEE for possible publication

This paper establishes a finite-aperture model for pattern-reconfigurable antennas (PRAs) and exploits its aperture-constrained Fourier representation to develop an efficient multiuser beamforming framework. First, we develop an ideal model by representing the complex radiation pattern using a Fourier series. By applying the Jacobi-Anger expansion, we relate the antenna aperture to the effective Fourier order and derive aperture-dependent power bounds for individual Fourier coefficients. Second, we employ a practical multiport network model and design three representative reconfigurable pixel antennas to verify the predicted effective Fourier orders and per-order power constraints. We then formulate weighted sum-rate maximization for multiuser downlink transmission under both models. Using bounded Fourier coefficients as auxiliary variables, we develop a coefficient-bound penalty-based weighted minimum mean-square error algorithm that separates continuous beamforming from discrete switch-state optimization. We further propose a one-bit neighborhood search that exploits the Sherman-Morrison identity to accelerate the discrete optimization. Simulation results validate the physical relevance of the ideal model and demonstrate multiuser sum-rate gains and reduced optimization runtime for densely switched antennas. The proposed model provides a physically grounded basis for PRA-enabled communication analysis and design, while the framework accommodates different beamforming objectives and PRA implementations.

0.32

Beam scheduling policy for communications and PNT services from LEO satellites

eess.SP ·2026-08-28 ·Alejandro Gonzalez-Garrido, Francesco Menzione, Ottavio M. Picchi, Carla Amatetti
similarity 0.52
Abstract

Future low Earth orbit (LEO) constellations are expected to provide positioning, navigation, and timing (PNT) as a native service alongside broadband, removing the GNSS dependency inherited by 5G non-terrestrial networks. This is known in the literature as fused PNT. This paper asks how a multibeam satellites in a LEO constellation should share their beams and power between a communication service (COM) and PNT in the scenario when communications keep full priority. Each beam on a satellite can provide a communication service, a PNT service or both (this under certain limitations). Then, the PNT service is evaluated by the share of area the reach $95\%$-of-time availability for a fixed maximum power available on each satellite. This paper present this PNT availability question as a beam-power budget, as the PNT beams do not need to transmit at the same power as the communication beams thanks to the processing gain on the receiver. Two satellite beam scheduler policies are compared: one where on a cell the beam serving COM demand is exclusive for COM, therefore the PNT service in this cell is provided by the other satellites in line of sight, it requires no signal modification and attains $70.5\%$ / $88.2\%$ availability under homogeneous/population-weighted traffic profiles; and a second policy, the COM beam can provide also PNT signals, this in-beam ranging embeds the ranging signal in the COM waveform, reaching the ceiling at the cost of waveform redesign. The availability gap between the two policies is concentrated on the thin-overlap equatorial belt.

0.38

Investigation of RIS Integration in Satellite Systems Guided by ITU-R VSAT Radiation Diagram

eess.SP cs.IT ·2026-10-12 ·Symeon Vaidanis, Athanasios D. Panagopoulos
published similarity 0.51
Abstract · This work has been accepted for publication in ITU Journal on Future and Evolving Technologies

The introduction of Reconfigurable Intelligent Surfaces (RIS) technology marks a transformative era in modern communication systems, enhancing coverage and facilitating higher data transmission rates. While recent research has delved into the integration of RIS into satellite networks, a critical and practical gap persists concerning its implementation in the satellite-Very Small Aperture Terminal (VSAT) downlink, specifically amplifying contributions from the VSAT side. This paper addresses this gap by proposing a simple and engineering methodology to optimize RIS position and orientation, incorporating considerations for the antennas' radiation patterns and the system's topology to streamline optimization variables. The primary objective of this paper is to alleviate the double fading constraint in the reflect link without the need for active elements, achieved by leveraging the Fresnel zone of the RIS. The improvement power ratio depends on the frequency and the VSAT 's diameter. The results show that for a VSAT with diameter 1m the gain is up to 9dB at 2 GHz (S band) and up to 14dB at 4 GHz (C band). Additionally, the RIS channel equation is refined, encompassing the tropospheric attenuation and accounting for electromagnetic wave polarization.

0.58