CS Paper Radar

STISA: A 0.16 GOPS/W/PE Single-Shot Inference FPGA-based SNN Accelerator with Algorithm and Hardware Co-Design

Kainan Wang, Chengyi Yang, Lei Liu, Chengting Yu, Yee Sin Ang, Bo Wang, Aili Wang

cs.AR ·submitted 2026-10-14 10:57 UTC · v1
publishedhot directionhighly cited

Abstract

Spiking neural networks (SNNs) offer great potential for low-power intelligent computing owing to their event-driven nature, yet their deployment is limited by high inference latency and inefficient hardware utilization caused by temporal dependencies. Existing accelerators struggle to balance timesteps, accuracy, and energy efficiency, while hardware-oriented timestep compression remains underexplored. To address these challenges, this work presents STISA, a unified algorithm-hardware co-design framework featuring: (i) a Temporal Splitter Compression (TSC) technique with a Temporal Split Structure (TSS) to reduce temporal redundancy while preserving network dynamics; (ii) a hardware-efficient spatiotemporal parallelism scheme, which co-optimizes dataflow and architecture through a Temporal-Prioritized Output-Stationary (TPOS) mapping and a flexible Block-Mux Streaming (BMS) architecture; and (iii) a joint TSC-TPOS-BMS co-optimization framework featuring a bandwidth-aware resource allocation strategy to achieve balanced accuracy, latency, and energy efficiency across diverse network architectures. On the algorithmic side, TSC reduces synaptic operations by 24.44%-51.71% while achieving competitive accuracies of 96.38%, 81.10%, 68.51%, and 82.40% on CIFAR-10, CIFAR-100, ImageNet, and DVS-CIFAR10, respectively. On the hardware side, FPGA prototypes deliver up to 7.99 speedup, 30.4% power reduction, and 30.1% LUT reduction. Compared with state-of-the-art SNN accelerators, STISA achieves 0.16 GOPS/W/PE, demonstrating its scalability and superior energy efficiency for real-time SNN inference under constrained hardware resources.

Comment
Author accepted manuscript. Published in IEEE Transactions on Circuits and Systems I: Regular Papers
Journal ref
IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 73, no. 5, pp. 3438-3451, May 2026
DOI
10.1109/TCSI.2025.3648765

Closest papers

Nearest neighbours by meaning across the whole index.

An FPGA-Based Spiking Neural Network for Spatiotemporal Pattern Learning and Classification

cs.AI cs.LG ·2026-10-12 ·Jingang Jin, Yue Ma, Zhenhang Zhang, Qinru Qiu
hot direction similarity 0.70
Abstract · 6 pages

Spiking Neural Networks (SNNs) are promising for energy-efficient spatiotemporal pattern recognition at the edge, but efficient deployment and on-device adaptation require specialized hardware. In this work, we present an FPGA implementation of multilayer SNNs for spatiotemporal pattern classification, in which both inference and training take place on the same hardware. Our design adopts a temporal-forward-only training algorithm that avoids the memory and latency overhead associated with traditional Backpropagation Through Time (BPTT). A mixed-precision scheme balances training stability with resource efficiency, and architectural optimization maximizes hardware and memory utilization. We further identify and resolve hazards that arise when inference and learning share the same memory, including port conflicts between the forward and backward access patterns and read-after-write dependencies in floating-point potential accumulation. Experimental evaluations on MNIST and five multivariate time-series classification datasets demonstrate that, with fully on-chip training, our SNN model achieves accuracy comparable to SNN or LSTM trained with BPTT. Compared to CPU and GPU based implementations, our FPGA design delivers 2.5 to 6 times higher throughput while consuming an order of magnitude less energy per sample.

0.23

A Resource-Efficient and Precision-Scalable FPGA Accelerator for Spiking Neural Networks Using Minifloat Arithmetic

cs.NE cs.AR ·2026-10-23 ·Ali Mehrabi, Philip C. Jose
similarity 0.68
Abstract

Spiking neural networks (SNNs) are well suited to event-driven edge intelligence, but the arithmetic complexity, memory footprint, and power consumption associated with conventional floating-point implementations can limit their deployment on resource-constrained hardware. This paper presents a precision-scalable and resource-efficient SNN hardware accelerator architecture based on parameterized minifloat arithmetic. The proposed architecture implements recurrent leaky integrate-and-fire (LIF) neurons and leaky-integrator (LI) readout neurons using a unified minifloat datapath whose word length and mantissa width can be configured at synthesis time. A valid-driven arithmetic subsystem employs pipelined minifloat multiplication and addition, while time-multiplexed processing enables arithmetic resources to be shared across synaptic accumulation, neuron-state updates, recurrent connections, and output processing. This organization reduces replicated arithmetic hardware and provides a scalable design approach for different SNN sizes and precision requirements. The architecture supports E8M23, E5M10, E5M6, and E4M3 formats within the same RTL framework, allowing precision, memory capacity, timing, and power to be traded without modifying the underlying neuron architecture. FPGA implementation results demonstrate that reducing minifloat precision substantially decreases arithmetic-resource utilization and estimated dynamic power, while also reducing the theoretical storage requirement of synaptic parameters. A recurrent event-based classification network is used as a hardware validation case, demonstrating that substantial precision reduction can be achieved while retaining competitive inference accuracy. The results establish parameterized minifloat computation as an effective basis for scalable, low-resource, and energy-efficient FPGA SNN accelerators.

0.21

BASC : Behavior-Aligned Quantization and Pruning for Low-Bit Spiking Neural Networks

cs.NE ·2026-08-12 ·Linliang Chen, Yan Zhong, Xin Liu, Sai Li, Wang Kang
similarity 0.67
Abstract

Spiking Neural Networks (SNNs) encode information through binary spikes and compute in an event-driven manner, offering an energy-efficient paradigm for machine intelligence. However, high-performance SNNs incur substantial memory and timestep-wise computation costs that hinder deployment on resource-constrained devices. Quantization and pruning provide complementary routes to reducing these costs, yet both make their decisions with local criteria that overlook temporal task feedback in quantization and inter-channel dependencies in pruning. Consequently, optimizing either criterion can still yield suboptimal compression performance. We refer to this discrepancy as criterion-behavior mismatch and propose Behavior-Aligned SNN Compression (BASC), a unified framework with two lightweight modules. For quantization, the scale is applied to synaptic current at every timestep and therefore shifts spike timing. Temporal-Behavior Scale Correction (TSC) makes the scale learnable under a temporal loss, allowing firing behavior to inform scale optimization. For pruning, channel importance depends on how channels jointly drive the membrane potential across the firing threshold. Boundary-Level Inter-Channel Correction (BIC) uses channelwise importance scores for initial selection and inter-channel information to re-evaluate only channels near the pruning threshold. Extensive experiments on static and neuromorphic benchmarks show that lower-bit BASC models match or outperform higher-bit baselines and retain this accuracy advantage after structured pruning, while further reducing model storage and synaptic operations.

0.04

PSA: A Pruning-Friendly Sparse-Aware Accelerator for Efficient Sparse Convolution in SNNs

cs.AR ·2026-10-15 ·Sanhe Fu, Kainan Wang, Bo Wang, Aili Wang
top venue similarity 0.66
Abstract · Accepted to IEEE International Conference on Artificial Intelligence Circuits and Systems (AICAS 2026)

Spiking neural networks (SNNs) are promising for energy-efficient artificial intelligence due to their event-driven sparse computation, and neuron pruning can further reduce redundant operations. However, in practical hardware accelerators, spike sparsity and pruning-induced sparsity produce highly irregular sparse workloads that are difficult to execute efficiently. Existing approaches do not jointly support sparse-input execution, low-overhead sparse convolution lowering and pruning-friendly execution. This paper presents PSA, a Pruning-friendly Sparse-aware Accelerator for efficient sparse convolution in SNNs. PSA features a Sparse-Aware Merge-Accumulation (SAMA) dataflow that aligns sparse spike indices and converts irregular activations into continuous computation streams for efficient sparse convolution execution. It further introduces a Sparse Implicit Group-wise im2col (SIG-im2col) convolution lowering mechanism that converts sparse convolution into SpMM on-chip with low mapping cost and memory overhead. In addition, PSA integrates a lightweight pruning-friendly gating mechanism to directly support pruned SNNs. Results on ResNet-18/CIFAR-10 show that PSA achieves a 4.45x improvement in energy efficiency and an 18.52x reduction in energy-delay product (EDP) over the dense baseline.

0.39

Hardware-Matched Spiking Neural Networks for Real-Time Purkinje Cell Spike Classification

cs.AR cs.AI ·2026-10-27 ·Arooba Farhan, Afsah Syed, Muhammad Fahd Ibrahim Bhatti, Muhammad Areeb Khalid Kidwai, Muhammad Ahsan Salar Khan +2 more
similarity 0.64
Abstract

Distinguishing Purkinje cell (PC) simple spikes (SSs) from complex spikes (CSs) is key to studying cerebellar function. PC recordings commonly rely on wired headstages, whose tethers restrict natural movement in freely behaving animals. Untethered headstages remove this constraint, but cannot continuously transmit raw recordings within their power budgets, making on-headstage spike classification an attractive form of compression, provided it runs accurately in real time on constrained hardware. This work presents two compact spiking neural networks (SNNs) matched to their target hardware: ConvSNN, which maps to the Matrix Vector Processor (MVP) of an EFM32PG28 microcontroller, and StreamSNN, which processes one waveform value per timestep using learned time constants and fixed synaptic delays for a dedicated SKY130 circuit. Evaluated on cells unseen during training, ConvSNN achieves a CS F1 of 0.873 with 1,018 parameters and StreamSNN 0.837 with 527 parameters, both with eight-bit weights. On the microcontroller, MVP acceleration reduces ConvSNN latency by 62.3\% and extends estimated battery life to 33.73~hours on a 50~mAh battery. In SKY130, StreamSNN occupies 0.173~mm$^2$ and consumes 0.46~$μ$J per event, with 0.2~ms of computation within an 8.3~ms end-to-end latency.

0.13

FlexSpIM: An Event-Based Digital Compute-In-Memory Accelerator with Flexible Operand Resolution and Layer-Wise Hybrid Stationarity

cs.AR ·2026-09-08 ·Nicolas Chauvaux, Adrian Kneip, Charlotte Frenkel
similarity 0.64
Abstract · 14 pages, 17 figures, 2 tables

Compute-in-memory (CIM) accelerators for spiking neural networks (SNNs) offer a promising solution for achieving $μ$s-level inference latency and ultra-low energy in edge vision applications. However, their limited flexibility at both circuit and system levels restricts their deployment across diverse workloads. This work introduces FlexSpIM, a digital CIM architecture supporting arbitrary operand resolution and shape within a unified storage for weights and neuron states (i.e., membrane potentials). These circuit-level capabilities enable a layer-level hybrid weight- and output-stationary dataflow, maximizing operand reuse and reducing costly on- and off-chip data movement during SNN execution. Measurement results from a fabricated FlexSpIM prototype in 40-nm CMOS demonstrate competitive 1-bit-normalized energy efficiency and higher throughput compared with prior fixed-precision digital CIM-based SNN accelerators, while providing bitwise resolution reconfiguration. Evaluated on the IBM DVS gesture dataset, FlexSpIM achieves 95.8% accuracy while enabling up to 45% energy and 52% latency reductions in large-scale systems compared with fixed stationarity approaches.

0.13

SparseForge: Beyond Spike Sparsity toward Hardware-Exploitable Neuron Pruning for Efficient SNN Acceleration

cs.AR ·2026-11-01 ·Kainan Wang, Sanhe Fu, Aili Wang
publishedbenchmark similarity 0.64
Abstract · Author accepted manuscript. Published in IEEE Transactions on Circuits and Systems I: Regular Papers

Spiking Neural Networks (SNNs) provide an event-driven paradigm for energy-efficient edge computing. However, operation-level sparsity in SNNs does not necessarily eliminate the hardware costs associated with redundant output neurons, including neuron-state maintenance, partial-sum (psum) accesses, and on-chip storage requirements. This paper presents SparseForge, a hardware-aware sparse SNN acceleration framework that jointly optimizes neuron pruning, sparse dataflow, and accelerator microarchitecture. At the algorithm level, we introduce a gated leaky integrate-and-fire (G-LIF) neuron to learn differentiable neuron masks with binary spike semantics. A dual regularization scheme is further developed to align pruning with both synaptic-operation reduction and psum buffer capacity reduction. At the dataflow level, we design a sparse Column-Wise Product (CWP) dataflow with a variant of incremental spike encoding to improve weight-access regularity and reduce sparse-index overhead under dynamic spike activity. At the architecture level, we develop a mask-aware sparse processing unit (SPU) that supports compressed spike decoding, sparse implicit im2col conversion, neuron-mask-gated psum updates, and decoupled sparse execution. Experimental results across multiple SNN backbones and datasets show that SparseForge retains 1.75%--77.99% of neurons and 0.16%--62.36% of synaptic operations, with a configurable accuracy--efficiency trade-off. The buffer-capacity-aware regularization reduces the required psum buffer capacity by up to 96.18\%. FPGA implementations on a Xilinx ZCU9EG achieve 296.94--619.49 GOPS/W across the evaluated workloads. Across matched network and dataset settings, SparseForge provides 1.24--4.17 higher FPS and 1.50--7.18 higher GOPS/W than representative FPGA-based SNN accelerators, while reducing EDP by 1.70--19.13, with benchmark-dependent accuracy--efficiency trade-offs.

0.23

Lonic: Algorithm-Hardware Co-Design for Energy-Efficient Fully Local Online SNN Training with INT4 Precision

cs.AR ·2026-08-12 ·Peilin Chen, Xiaoxuan Yang
publishedcode/data similarity 0.63
Abstract · Accepted to ICCAD 2026

Spiking neural networks (SNNs) have recently attracted increasing attention as an energy-efficient learning paradigm. Existing works also propose temporally and fully local online SNN training algorithms to address memory and computation overhead. However, they do not consider whether the algorithmic advantages can be effectively translated into real-device efficiency. To address this challenge, we present Lonic, an algorithm-hardware co-design for energy-efficient and scalable fully local online supervised SNN learning. On the algorithm side, we implement an INT4 low-precision training algorithm for fully local online SNN learning while maintaining accuracy. On the hardware side, to leverage the benefits of the proposed algorithm, we introduce reconfigurable multiplier-free integer PE arrays, dual-optimization zero-gating strategy, temporal prefix-accelerated local learning dataflow, and low-precision weight movement to significantly improve training efficiency. Compared to Apple M4 and Nvidia V100 GPUs, Lonic achieves average energy efficiency improvements of 17.44x and 66.28x, respectively, along with speedups of 3.25x and 1.02x, respectively. Moreover, Lonic achieves 15.95x (14.64x) and 1.52x (7.28x) energy efficiency (area efficiency) over ASIC TPU-like and H2Learn accelerators, respectively. The code for Lonic is available at https://github.com/peilin-chen/Lonic.

0.47