CS Paper Radar

A Resource-Efficient and Precision-Scalable FPGA Accelerator for Spiking Neural Networks Using Minifloat Arithmetic

Ali Mehrabi, Philip C. Jose

cs.NE cs.AR ·submitted 2026-10-23 01:45 UTC · v1

Abstract

Spiking neural networks (SNNs) are well suited to event-driven edge intelligence, but the arithmetic complexity, memory footprint, and power consumption associated with conventional floating-point implementations can limit their deployment on resource-constrained hardware. This paper presents a precision-scalable and resource-efficient SNN hardware accelerator architecture based on parameterized minifloat arithmetic. The proposed architecture implements recurrent leaky integrate-and-fire (LIF) neurons and leaky-integrator (LI) readout neurons using a unified minifloat datapath whose word length and mantissa width can be configured at synthesis time. A valid-driven arithmetic subsystem employs pipelined minifloat multiplication and addition, while time-multiplexed processing enables arithmetic resources to be shared across synaptic accumulation, neuron-state updates, recurrent connections, and output processing. This organization reduces replicated arithmetic hardware and provides a scalable design approach for different SNN sizes and precision requirements. The architecture supports E8M23, E5M10, E5M6, and E4M3 formats within the same RTL framework, allowing precision, memory capacity, timing, and power to be traded without modifying the underlying neuron architecture. FPGA implementation results demonstrate that reducing minifloat precision substantially decreases arithmetic-resource utilization and estimated dynamic power, while also reducing the theoretical storage requirement of synaptic parameters. A recurrent event-based classification network is used as a hardware validation case, demonstrating that substantial precision reduction can be achieved while retaining competitive inference accuracy. The results establish parameterized minifloat computation as an effective basis for scalable, low-resource, and energy-efficient FPGA SNN accelerators.

Closest papers

Nearest neighbours by meaning across the whole index.

An FPGA-Based Spiking Neural Network for Spatiotemporal Pattern Learning and Classification

cs.AI cs.LG ·2026-10-12 ·Jingang Jin, Yue Ma, Zhenhang Zhang, Qinru Qiu
hot direction similarity 0.73
Abstract · 6 pages

Spiking Neural Networks (SNNs) are promising for energy-efficient spatiotemporal pattern recognition at the edge, but efficient deployment and on-device adaptation require specialized hardware. In this work, we present an FPGA implementation of multilayer SNNs for spatiotemporal pattern classification, in which both inference and training take place on the same hardware. Our design adopts a temporal-forward-only training algorithm that avoids the memory and latency overhead associated with traditional Backpropagation Through Time (BPTT). A mixed-precision scheme balances training stability with resource efficiency, and architectural optimization maximizes hardware and memory utilization. We further identify and resolve hazards that arise when inference and learning share the same memory, including port conflicts between the forward and backward access patterns and read-after-write dependencies in floating-point potential accumulation. Experimental evaluations on MNIST and five multivariate time-series classification datasets demonstrate that, with fully on-chip training, our SNN model achieves accuracy comparable to SNN or LSTM trained with BPTT. Compared to CPU and GPU based implementations, our FPGA design delivers 2.5 to 6 times higher throughput while consuming an order of magnitude less energy per sample.

0.23

SparseForge: Beyond Spike Sparsity toward Hardware-Exploitable Neuron Pruning for Efficient SNN Acceleration

cs.AR ·2026-11-01 ·Kainan Wang, Sanhe Fu, Aili Wang
publishedbenchmark similarity 0.73
Abstract · Author accepted manuscript. Published in IEEE Transactions on Circuits and Systems I: Regular Papers

Spiking Neural Networks (SNNs) provide an event-driven paradigm for energy-efficient edge computing. However, operation-level sparsity in SNNs does not necessarily eliminate the hardware costs associated with redundant output neurons, including neuron-state maintenance, partial-sum (psum) accesses, and on-chip storage requirements. This paper presents SparseForge, a hardware-aware sparse SNN acceleration framework that jointly optimizes neuron pruning, sparse dataflow, and accelerator microarchitecture. At the algorithm level, we introduce a gated leaky integrate-and-fire (G-LIF) neuron to learn differentiable neuron masks with binary spike semantics. A dual regularization scheme is further developed to align pruning with both synaptic-operation reduction and psum buffer capacity reduction. At the dataflow level, we design a sparse Column-Wise Product (CWP) dataflow with a variant of incremental spike encoding to improve weight-access regularity and reduce sparse-index overhead under dynamic spike activity. At the architecture level, we develop a mask-aware sparse processing unit (SPU) that supports compressed spike decoding, sparse implicit im2col conversion, neuron-mask-gated psum updates, and decoupled sparse execution. Experimental results across multiple SNN backbones and datasets show that SparseForge retains 1.75%--77.99% of neurons and 0.16%--62.36% of synaptic operations, with a configurable accuracy--efficiency trade-off. The buffer-capacity-aware regularization reduces the required psum buffer capacity by up to 96.18\%. FPGA implementations on a Xilinx ZCU9EG achieve 296.94--619.49 GOPS/W across the evaluated workloads. Across matched network and dataset settings, SparseForge provides 1.24--4.17 higher FPS and 1.50--7.18 higher GOPS/W than representative FPGA-based SNN accelerators, while reducing EDP by 1.70--19.13, with benchmark-dependent accuracy--efficiency trade-offs.

0.23

FlexSpIM: An Event-Based Digital Compute-In-Memory Accelerator with Flexible Operand Resolution and Layer-Wise Hybrid Stationarity

cs.AR ·2026-09-08 ·Nicolas Chauvaux, Adrian Kneip, Charlotte Frenkel
similarity 0.72
Abstract · 14 pages, 17 figures, 2 tables

Compute-in-memory (CIM) accelerators for spiking neural networks (SNNs) offer a promising solution for achieving $μ$s-level inference latency and ultra-low energy in edge vision applications. However, their limited flexibility at both circuit and system levels restricts their deployment across diverse workloads. This work introduces FlexSpIM, a digital CIM architecture supporting arbitrary operand resolution and shape within a unified storage for weights and neuron states (i.e., membrane potentials). These circuit-level capabilities enable a layer-level hybrid weight- and output-stationary dataflow, maximizing operand reuse and reducing costly on- and off-chip data movement during SNN execution. Measurement results from a fabricated FlexSpIM prototype in 40-nm CMOS demonstrate competitive 1-bit-normalized energy efficiency and higher throughput compared with prior fixed-precision digital CIM-based SNN accelerators, while providing bitwise resolution reconfiguration. Evaluated on the IBM DVS gesture dataset, FlexSpIM achieves 95.8% accuracy while enabling up to 45% energy and 52% latency reductions in large-scale systems compared with fixed stationarity approaches.

0.13

Lonic: Algorithm-Hardware Co-Design for Energy-Efficient Fully Local Online SNN Training with INT4 Precision

cs.AR ·2026-08-12 ·Peilin Chen, Xiaoxuan Yang
publishedcode/data similarity 0.69
Abstract · Accepted to ICCAD 2026

Spiking neural networks (SNNs) have recently attracted increasing attention as an energy-efficient learning paradigm. Existing works also propose temporally and fully local online SNN training algorithms to address memory and computation overhead. However, they do not consider whether the algorithmic advantages can be effectively translated into real-device efficiency. To address this challenge, we present Lonic, an algorithm-hardware co-design for energy-efficient and scalable fully local online supervised SNN learning. On the algorithm side, we implement an INT4 low-precision training algorithm for fully local online SNN learning while maintaining accuracy. On the hardware side, to leverage the benefits of the proposed algorithm, we introduce reconfigurable multiplier-free integer PE arrays, dual-optimization zero-gating strategy, temporal prefix-accelerated local learning dataflow, and low-precision weight movement to significantly improve training efficiency. Compared to Apple M4 and Nvidia V100 GPUs, Lonic achieves average energy efficiency improvements of 17.44x and 66.28x, respectively, along with speedups of 3.25x and 1.02x, respectively. Moreover, Lonic achieves 15.95x (14.64x) and 1.52x (7.28x) energy efficiency (area efficiency) over ASIC TPU-like and H2Learn accelerators, respectively. The code for Lonic is available at https://github.com/peilin-chen/Lonic.

0.47

STISA: A 0.16 GOPS/W/PE Single-Shot Inference FPGA-based SNN Accelerator with Algorithm and Hardware Co-Design

cs.AR ·2026-10-14 ·Kainan Wang, Chengyi Yang, Lei Liu, Chengting Yu, Yee Sin Ang +2 more
publishedhot directionhighly cited similarity 0.68
Abstract · Author accepted manuscript. Published in IEEE Transactions on Circuits and Systems I: Regular Papers

Spiking neural networks (SNNs) offer great potential for low-power intelligent computing owing to their event-driven nature, yet their deployment is limited by high inference latency and inefficient hardware utilization caused by temporal dependencies. Existing accelerators struggle to balance timesteps, accuracy, and energy efficiency, while hardware-oriented timestep compression remains underexplored. To address these challenges, this work presents STISA, a unified algorithm-hardware co-design framework featuring: (i) a Temporal Splitter Compression (TSC) technique with a Temporal Split Structure (TSS) to reduce temporal redundancy while preserving network dynamics; (ii) a hardware-efficient spatiotemporal parallelism scheme, which co-optimizes dataflow and architecture through a Temporal-Prioritized Output-Stationary (TPOS) mapping and a flexible Block-Mux Streaming (BMS) architecture; and (iii) a joint TSC-TPOS-BMS co-optimization framework featuring a bandwidth-aware resource allocation strategy to achieve balanced accuracy, latency, and energy efficiency across diverse network architectures. On the algorithmic side, TSC reduces synaptic operations by 24.44%-51.71% while achieving competitive accuracies of 96.38%, 81.10%, 68.51%, and 82.40% on CIFAR-10, CIFAR-100, ImageNet, and DVS-CIFAR10, respectively. On the hardware side, FPGA prototypes deliver up to 7.99 speedup, 30.4% power reduction, and 30.1% LUT reduction. Compared with state-of-the-art SNN accelerators, STISA achieves 0.16 GOPS/W/PE, demonstrating its scalability and superior energy efficiency for real-time SNN inference under constrained hardware resources.

0.65

Non-uniform Memory Partitioning For Low-Power Spiking Neural Networks

cs.AR ·2026-08-31 ·Simon Richter, Darío Fernández Khatiboun, Maryam Sadeghi, Milad Zamani, Farshad Moradi
top venuebenchmark similarity 0.67
Abstract · 5 pages, 3 figures, Publishes at IEEE AICAS 2025

Spiking Neural Networks (SNNs) naturally excel in processing temporally rich and sparse data. However, because of their time-stepped processing, memory access, specifically to synaptic weights stored in SRAM (static random-access memory), tends to dominate total power consumption. To address this issue, without incurring a large area overhead, we propose to leverage the greatly varying average firing rate of neurons in the network to efficiently allocate synaptic weights to an on-chip memory consisting of multiple non-uniformly sized memory banks. By assigning weights of frequently firing neurons to shallow, low-access cost memory and less actively accessed weights to deeper, high-density memories, the average power consumption of the synaptic weight memory is decreased without incurring a large area overhead. To benchmark our proposed architecture and find optimal configurations of memory arrangements, we perform an automatic exploration based on application requirements and hardware constraints. For memory designs synthesized in 28-nm CMOS technology, we show that our architecture can achieve a synaptic weight memory access power reduction of up to 61\% compared to a conventional design, with a 2.1$\times$ lower area overhead, as compared to a traditional uniformly partitioned memory bank that achieves a comparable reduction.

0.68

Spike-Aware Gradient-Based Mixed-Precision Quantization of Spiking Neural Networks for Vision Applications

cs.LG ·2026-10-21 ·Rajshekhar Rakshit, Devgokul B., Rakshitha Kalkura, Gopalakrishnan Srinivasan
similarity 0.67
Abstract

In recent years, Spiking Neural Networks (SNNs) have gained massive attention as an energy-efficient neural computing paradigm due to their event-driven and sparse computing capability. However, maintaining accuracy under low-precision constraints, necessary for practical deployment, has been largely unexplored for SNN models. In addition, existing Hessian-based approaches for quantization, such as HAWQ-V2, incur significant memory and computational overhead due to temporal unrolling across multiple SNN timesteps. We propose a spike-aware gradient-based mixed-precision quantization framework for SNNs that adaptively assigns bit-widths using first-order gradient information, avoiding costly second-order Hessian computations. We evaluate our method across various SNN-based architectures, including VGG, ResNet, and Vision Transformer models obtained from both ANN-to-SNN conversion and direct training frameworks, on CIFAR10/100, ImageNet, and DVS-CIFAR-10 datasets. Notably, on ResNet-34 evaluated on ImageNet, our method achieves 73.30% accuracy at 4.78$\times$ compression, which is comparable to that provided by HAWQ-V2, while reducing memory consumption by 2.31$\times$ and bit-allocation runtime by 100$\times$. We also present an energy analysis for mixed-precision SNNs showing that the proposed quantization strategy enables energy-efficient deployment without compromising performance.

0.03

Zephyr: An Efficient Audio Denoising System Using Spiking Neural Networks Enabled With A Sparsity-Aware Flexible FPGA PE Array

cs.AR eess.AS ·2026-09-29 ·Cheng-En Chang, Chi-Wei Kao, Chung-Lun Yang, Yan-Lin Jiang, Yi-Chen Huang +2 more
similarity 0.66
Abstract

In this work we look to neuromorphic computing to solve the power consumption problem that audio denoising neural networks face on edge devices like smartphones, wireless headphones and hearing aids. Spiking neural networks (SNNs) have the potential to solve this problem due to their high activation sparsity and low complexity, however many SOTA SNNs require hardware that supports a mixture of operations to be able to fully perform inference. To solve this problem, we convert SOTA audio denoising neural network Spiking-FullSubNet to a hardware friendly version showing that via QAT and activation function simplification we can achieve $\approx28\times$ improvement in power consumption to 52.9nJ per 32ms audio frame when calculated for custom digital hardware in a 45nm process node. We then propose a digital circuit which by means of a sparsity-aware flexible PE array can perform inference of the heterogeneous compute load of Spiking-FullSubNet, and validate this circuit on a PYNQ-Z1 FPGA achieving a real-time factor of 0.727 at 100MHz.

0.22