CS Paper Radar

A Black-Box Positioning Solution for Effortless Integration in Wearable Navigation

Anh-Van Vu, Changmin Sung, Dongsoo Han

cs.RO cs.AR ·submitted 2026-10-15 06:32 UTC · v1
published

Abstract

Accurate localization is critical for a wide range of applications, including navigation, augmented reality, safety management, and healthcare. However, achieving accurate positioning remains challenging, especially in GPS-degraded environments. Pedestrian Dead Reckoning (PDR), which estimates position based on inertial sensor data, offers a promising alternative but typically demands substantial effort in algorithm design and system integration. This complexity often leads to prolonged development timelines and elevated costs. To address these challenges, we present the PDR Sensor (PDRS), a plug-and-play, black-box PDR module optimized for seamless integration into wearable and IoT platforms. PDRS integrates a microprocessor and an inertial measurement unit (IMU) within a compact, low-power module. It executes real-time sensor fusion onboard, providing position updates via standard interfaces (I2C, SPI, UART). Experimental evaluations demonstrate its high robustness, achieving a step detection error of just 0.16% over 1250 steps and a traveled distance error of 1.87% under diverse conditions. The system further exhibits low latency (2.5 ms) and modest power consumption (52.35 mA). Unlike conventional studies, the PDRS leverages a holistic co-design of hardware and software to enhance performance and integration aspects, simplifying adoption without requiring deep expertise. By lowering technical barriers, PDRS enables developers and researchers to prioritize innovation in IoT and wearable technologies, accelerating prototyping, reducing development time, and advancing industry progress. Future work aims to enhance accuracy, reduce power usage and module size, and integrate AI-driven techniques to better mitigate drift.

Comment
8 pages
DOI
10.1109/SMC58881.2025.11342779

Closest papers

Nearest neighbours by meaning across the whole index.

CoWear: Towards Collaborative Wearable Inertial Localization with Multiple Smart Devices

cs.RO ·2026-10-14 ·Zhuoyuan She, Zhanpeng Zhang, Yapeng Chen, Jiale Wang, Xin Xie +1 more
dataset similarity 0.65
Abstract · 8 pages, 5 figures

Consumer smart devices observe the same human motion from different body locations, yet existing inertial-localization benchmarks rarely provide synchronized heterogeneous wearables with device-specific motion ground truth. We present CoWear, a dataset and reference framework for collaborative inertial localization using a smartphone, smartwatch, and smart glasses. The dataset contains over 30 participants, over 300 walking sessions, and more than 30 hours and 100 km of aggregate device trajectories, with each device individually tracked by motion capture. To enable collaboration across distinct body motions, we train role-specific estimators to predict the displacement of a common reference device over synchronized temporal windows. Their predictions are transformed to the world frame using gyroscope integration and fused according to learned uncertainty. Experiments using phone, glasses, and watch as reference targets show that multi-device fusion consistently improves both displacement and trajectory rollout accuracy over individual-device estimation. CoWear provides a dataset and reproducible baseline for studying collaborative inertial localization across heterogeneous consumer wearables.

0.26

Calibration-free IMU-based Relative Orientation Estimation under Dynamic Human Motion

cs.RO eess.SY ·2026-10-22 ·Ruiyuan Li, Hassan Osman, Ajay Seth, Manon Kok
similarity 0.63
Abstract · 8 pages, 7 figures, 1 table. Submitted to IEEE Sensors Journal

Recent magnetometer-free inertial measurement unit (IMU) methods can reduce drift in joint motion estimation using rigid-body constraints, but they typically require pre-calibrated sensor locations, assumptions of specific joint models (e.g., hinge joints) or limited motion types, or an external reference for global orientation. Furthermore, challenges related to high-frequency impacts (e.g. at foot strikes during gait) and numerical differentiation of noisy measurements have not been explicitly addressed. We propose an extended Kalman filter that estimates relative IMU orientation and sensor location simultaneously, requiring neither offline sensor location calibration nor a global orientation anchor. A systematic simulation study shows that the quality of the relative orientation and the sensor location estimates depends on different motion-intensity sources: the joint center acceleration and the relative angular velocity, respectively. A low-pass filter (LPF) is used to mitigate real-signal outliers before applying the rigid-body constraint. When applied to the OpenSense dataset with real IMU measurements across four subjects with three lower-body joint types during walking and complex tasks including various motion types, the proposed method achieves an overall relative orientation error of 2.61°, compared with 10.40° for a baseline using offline-estimated sensor locations and 7.43° for a baseline using marker-derived sensor locations. These results show that the proposed calibration-free estimation framework handles real IMU data effectively and achieves accurate relative orientation without offline sensor location calibration.

0.16

Location-Based Safety Management with Wearable Seamless Indoor-Outdoor Positioning

cs.RO ·2026-10-15 ·Anh-Van Vu, Seungwoo Chae, Changmin Sung, Van-Tuan Nguyen, Dongsoo Han
published similarity 0.63
Abstract · 6 pages

Reliable worker localization is essential for real-time industrial safety management, but seamless outdoor-indoor positioning remains challenging. GNSS performs well outdoors yet degrades near buildings and fails indoors, while many indoor systems require costly infrastructure or extensive calibration. This paper presents a practical safety-oriented positioning system that uses resource-constrained wearable tags and a device-cloud split architecture for continuous outdoor-indoor worker tracking. The tag integrates GNSS, IMU, barometric sensing, LTE Cat-M communication, and performs lightweight sensor fusion, while the cloud server executes map-aware fusion for continuous tracking. Developed as an operational platform, the system also includes a database, a map tool, and a dashboard that provide real-time monitoring, geofencing-based access alerts, and safety and productivity analysis. Experiments with multiple participants, each walking an approximately 1400 m outdoor-indoor route, using LTE Cat-M communication, achieve mean errors of 1.32 m indoors and 3.30 m outdoors, while maintaining low positioning latency and efficient power consumption. These results demonstrate the feasibility of wearable-based seamless positioning for scalable real-time safety management.

0.40

Smartphone Indoor Localization Enhanced by Hierarchical Multi-Sensor Context Recognition

cs.LG cs.RO ·2026-10-29 ·Wenhui Feng, Muhan Weng, Jianyu Liu, Xiansheng Yang, Hao Zhang +2 more
similarity 0.60
Abstract

Smartphone indoor localization requires low-cost, robust positioning across scene transitions and phone-use variations. Pedestrian dead reckoning (PDR) enables infrastructure-free deployment but accumulates errors from heading drift, structural transitions, and carrying-mode changes. Existing methods often treat contextual cues as a single event stream or local correction signal, limiting their ability to address distinct localization errors. This paper presents a framework enhanced by hierarchical multi-sensor context recognition. A jointly data- and model-driven recognition model predicts environment, scene, and activity probabilities, which are converted into scene-event and action-context segments. Scene-event segments guide scene-constrained PDR correction through corridor heading constraints, landmark attraction, fixed-lag backtracking, and vertical-transition handling. Action-context segments drive action-aware RoNIN-based position compensation for carrying-mode-dependent drift. Experiments on cross-floor and multi-action trajectories against LiDAR-SLAM references show that the proposed framework outperforms PDR and representative learned inertial odometry baselines, demonstrating that hierarchical semantics provide reliable, localization-specific correction cues.

0.14

Embedded Bare-Metal Radar-Inertial Odometry

cs.RO ·2026-10-05 ·Nicolai Adil Øyen Aatif, Morten Nissov, Kostas Alexis
code/data similarity 0.58
Abstract

Compact extraplanetary rovers and micro aerial vehicles require robust state estimation frameworks designed to operate under strict computational constraints in unforgiving environments. Typical solutions involving vision- or LiDAR-based sensing are computationally expensive and vulnerable to environments with perceptual degradation, making them poorly suited for resource-constrained platforms and austere conditions. Alternatively, Frequency Modulated Continuous Wave (FMCW) radar offers both robustness and computational efficiency by directly providing velocity measurements coupled with inherent resilience to perceptual degradation. These factors enable robust estimation, thereby reducing reliance on human operators for supervision to ensure platform safety in challenging environments. In this manuscript, we propose an embedded radar-inertial estimator tailored for low-compute platforms. All sensor drivers, data processing, and aided inertial navigation are performed on a single-core microcontroller, demonstrating its computational efficiency. Flight experiments show translational APE of $0.51-0.82\,\mathrm{m}$ and RPE of $<$3\,\% against motion capture, alongside closed-loop flight through an unmodified PX4 stack. The firmware and printed circuit board design are openly available on GitHub at https://github.com/ntnu-arl/embedded_rio and https://github.com/ntnu-arl/embedded_rio-pcb respectively.

0.32

HexVIO: Towards All-Day Stereo-Inertial Tracking Through Commodity DSPs

cs.RO cs.CV ·2026-10-02 ·Patrick Wolf, Mateo de Mayo, Daniel Cremers
similarity 0.58
Abstract

The ability of a device to localize itself within its surroundings is a fundamental prerequisite for spatial computing. Visual-inertial odometry (VIO) has proven to be a cost-effective and accurate solution for this task. Robots, wearables, XR devices, and drones can benefit significantly from efficient implementations of VIO since they allow for cooler, lighter, and cheaper devices with longer battery life and a better user experience. In this work, we propose to enhance the efficiency of a VIO system by leveraging the Hexagon DSP, a commodity co-processor present in many modern smartphones and XR devices. Our approach offloads the visual frontend of a stereo-inertial odometry system to the DSP while keeping the backend on the main CPU. By optimizing the implementation for the DSP architecture, we achieve significant reductions in power consumption and latency compared to CPU-only execution. Our system, HexVIO, demonstrates a 67% reduction in power consumption or an 86% increase in throughput on a commodity smartphone, with the ability to sustain long-term real-time 30 fps tracking for 0.83 W, corresponding to ~18 hours of tracking on the testing device. These results highlight the potential of commodity DSPs for enabling all-day visual-inertial tracking in robotics and mobile devices.

0.10

Rotation-Invariant Multi-IMU Activity Recognition under Independent Per-Location Orientation Shifts

cs.AI cs.LG ·2026-08-16 ·Seungyeol Baek, Yoonbyung Chai, Yonghyeon Lee, Sungjoon Choi, Sungho Suh
published similarity 0.57
Abstract · 6 pages, 2 figures. ACM International Symposium on Wearable Computing (ISWC) 2026

Human Activity Recognition (HAR) with self-administered wearables, such as at-home rehabilitation and exercise monitoring, often requires reattaching inertial measurement units (IMUs) across sessions. In multi-IMU settings, this can induce independent orientation offsets across body locations, a deployment shift that conventional scalar HAR models do not structurally handle. Existing remedies rely on rotation augmentation, whose robustness depends on sampled transformations, or calibration and orientationnormalization pipelines requiring additional reference-frame assumptions or explicit procedures. We present Truly Rotation-Invariant HAR (TRI-HAR), a rotation-invariant framework that makes robustness to independent per-location IMU orientation offsets a structural model property. TRI-HAR reshapes accelerometer and gyroscope streams into triaxial vectors, applies a shared SO(3)-equivariant backbone and invariant projection to each IMU location, and fuses the resulting invariant features for activity classification. Across four multi-IMU benchmarks, TRI-HAR preserves macro-F1 under fixed independent per-location SO(3) rotations and outperforms rotation-augmented baselines under this target shift without requiring rotational augmentation.

0.58

IMU-Aided Correction of Orientation-Induced Ranging Error in Bluetooth Channel Sounding on Commercial Hardware

eess.SY ·2026-09-01 ·Mihir Bapat, Santosh Nagaraj
similarity 0.56
Abstract

Bluetooth Low Energy Channel Sounding (BLE CS), standardized in Bluetooth Core Specification 6.0 (September 2024), enables distance estimation via phase-based ranging (PBR) and round-trip time (RTT). Although prior work has studied CS accuracy in configurations with a fixed orientation, no published work has studied how device orientation affects ranging error on commercial hardware. We present the first study of orientation-induced CS ranging error and a Machine Learning correction using IMU features. This study used the EFR32xG24 Channel Sounding Development Kit, the only commercial CS platform with an integrated six-axis Inertial Measurement Unit (IMU). Our results show that device orientation has a substantial effect on CS ranging accuracy; we found that a Random Forest model trained on the IMU derived orientation achieved a 74.6\% Mean Absolute Error (MAE) reduction under a Leave One Orientation Out Evaluation, demonstrating that IMU readings have potential to improve ranging accuracy.

0.18