CS Paper Radar

Deterministic Global Minimum Cut Using $\tilde{O}(n^{3/2})$ Cut Queries

Yotam Kenneth-Mordoch

cs.DS ·submitted 2026-10-16 13:41 UTC · v1
published

Abstract

Finding a global minimum cut in an unweighted graph is a fundamental task in the cut-query model. While there exists a randomized algorithm for this task using $\tilde O(n)$ queries, known deterministic algorithms use $\tilde{O}(n^{5/3})$ queries. We improve upon this result and give a simple deterministic algorithm that finds a global minimum cut using $\tilde O(\min\left\{ nδ,n^2/δ\right\})$ cut queries, which equals $\tilde{O}(n^{3/2})$ in the worst case, where $δ$ is the minimum degree of the graph. The key ingredient in our approach is an efficient maximum $s,t$-flow algorithm, for the case when the minimum $s,t$-cut has value at most $δ$.

Comment
Accepted at SOSA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Finding and Certifying Weighted Minimum Cuts with Cut Queries

cs.DS ·2026-11-02 ·Troy Lee
similarity 0.80
Abstract · 57 pages. v2: corrects cross-reference names (some lemmas, remarks, definitions and corollaries were labelled "Theorem"); no change in conte…

We study the deterministic and nondeterministic cut query complexity of minimum cut in undirected graphs with arbitrary nonnegative edge weights. For the nondeterministic case, we show that every $n$-vertex graph has an $O(n\log^2(2n))$-query certificate of its exact global minimum-cut value, such that any other nonnegatively weighted graph on the same vertex set that agrees on these queries has the same minimum cut value. A key ingredient is a way to certify a maximum $s$--$t$ flow value with only $O(n)$ cut queries. For the deterministic case we give an algorithm that finds an exact global minimum cut using $O(n^{3/2}\log^3(2n)(\log\log(2n))^2)$ cut queries. Previously no $O(n^{2-\varepsilon})$ deterministic bound was known for arbitrary nonnegatively weighted graphs. The algorithm follows Karger's two-respecting tree approach. The key new ingredient is a deterministic construction of a weak skeleton of the input graph $G$: an explicit weighted graph $H$ in which every minimum cut of $G$ is a $5/4$-approximate minimum cut.

0.25

Query Complexity of Densest Sub(hyper)graph Problems

cs.DS cs.CC ·2026-10-13 ·Sinan G. Aksoy, Eli Friedman, Nate Veldt, Stephen J. Young
theory similarity 0.75
Abstract · 26 pages

Rubinstein et al. introduce the study of connectivity and minimum cut problems in the cut query model, where an algorithm can only access the edges of a graph through CUT queries. In this work, we examine the query complexity of densest subgraph problems. Our first contribution is to generalize the uniform sparsification approach for Densest Subgraph and other heavy subgraph problems to weighted graphs, achieving the following results. >A $(1+\varepsilon)$-approximation for weighted Densest Subgraph in $O(n\log^2 n/\varepsilon^2)$ queries, roughly matching the $Ω(n/\log n)$ lower bound we prove for randomized algorithms. >A $(1+\varepsilon)$-approximation for weighted Max Cut in $O(n\log^2 n/\varepsilon^2)$ queries. This improves upon the bound of $O(n\log^3 n(\log n+1/\varepsilon^2))$ queries achieved by Plevrakis et al., making significant progress towards their lower bound of $Ω(n/\log n)$ queries. In contrast, we rule out approximation schemes with truly subquadratic query complexity for Densest $k$-Subgraph and settle its exact query complexity in both the unweighted and deterministic settings. For hypergraphs, we show CUT queries alone cannot achieve $o(\sqrt{n})$-approximation for Densest Subhypergraph or $o(n)$-approximation for Densest $k$-Subhypergraph, regardless of the number of queries. Augmenting CUT queries with the EDGE oracle of Chen et al., we overcome this barrier for Densest Subhypergraph and obtain a $(1+\varepsilon)$-approximation on rank-$r$ hypergraphs using $O(nr\log n/\varepsilon^2)$ queries. We also extend our Densest $k$-Subgraph hardness results to hypergraphs and prove exponential query lower bounds for exact Densest $k$-Subhypergraph. Lastly, confirming a conjecture of Chakrabarty and Liao, we show that simulating an ADD query using CUT and IS-EDGE$^?$ queries requires exponentially-many queries.

0.24

Faster Minimum k-Cut II: Improved Randomized and Deterministic Algorithms for Weighted Graphs

cs.DS ·2026-08-17 ·Trevor Vaughn
similarity 0.71
Abstract

The Minimum $k$-Cut problem asks for a minimum-weight set of edges whose removal leaves an undirected weighted graph with at least $k$ connected components. We consider only $k\ge3$. The fastest previous algorithm for weighted graphs ran in $n^{k-2}(m+n)(\log n)^{O(k^2)}$ randomized time~\cite{LV26}; on dense graphs this is $\widetilde O_k(n^k)$, and for $k=3$ it gives an $\widetilde O(nm)$-time algorithm. We improve the dense-graph exponent from $k$ to $k-1$ and obtain the same exponent deterministically. After aggregating parallel edges in $O(m)$ time, our randomized algorithm runs with high probability in \begin{equation*} k^{O(k^2)}n^{k-1}\log^2n \end{equation*} time, while our deterministic algorithm runs in \begin{equation*} k^{O(k^2)}n^{k-1}\log^{O(1)}n \end{equation*} time. In particular, weighted Minimum $3$-Cut can be solved in $O(n^2\log^2 n)$ randomized time and in $\widetilde O(n^2)$ deterministic time. The algorithms have two main components. First, we give a faster algorithm for weighted Minimum $3$-Cut. After handling optima with a very small side and optima with two light sides, the remaining optimum has a unique structured side. Tree packing reduces its completion to a batched collection of $2$-respecting cut problems. Second, we reduce Minimum $k$-Cut to Minimum $3$-Cut by enumerating a bounded family of light-cut candidates and recursively completing either side of each candidate. If the enumeration produces too many cuts, then we can instead produce an optimum $k$-cut directly. We derandomize the $3$-cut algorithm using a deterministic near-minimum-cut skeleton, and derandomize the reduction using a specialized $4$-cut algorithm using the skeleton, the constructive light-cut bounds, and the deterministic spectral sparsifier of \cite{BSS12}.

0.23

Directed Global Minimum Cut in Almost-Linear Time

cs.DS ·2026-10-07 ·Henry Fleischmann, Jason Li, Thatchaphol Saranurak, Benyu Wang
highly cited similarity 0.70
Abstract · 11 pages, 4 figures

We give a randomized reduction from global minimum cut in a directed graph with $n$ vertices and $m$ weighted edges to maximum-flow computations on graphs of total size $\widetilde{O}(m)$. For polynomially bounded integral weights, this yields the first almost-linear $m^{1+o(1)}$-time algorithm [vdBCK+23], improving the previous $m^{1+o(1)}\min\{\sqrt{n},n/m^{1/3}\}$ bound [CLN+22]. Previous work reduced finding the minimum cut to constructing a 1-respecting arborescence, a directed spanning tree with exactly one edge crossing a minimum cut [CLN+22]. They then construct such a tree by sampling from a $(1+ε)$-approximate arborescence packing, which currently requires superlinear time. Our algorithm sidesteps constructing the packing entirely and relies on a novel iterative arborescence sampling procedure. We show that, after $O(\log n)$ rounds of sampling, our final arborescence 1-respects the minimum cut with constant probability.

0.48

Tight Quantum Query Bounds for Minimum Cut and Multicut on Dense Graphs

cs.DS cs.CC ·2026-11-13 ·Tianhang Lu, Runtian Ren, Shengcai Liu
theory similarity 0.70
Abstract

We determine the dense worst-case quantum query complexity of exact minimum multicut on simple unweighted undirected graphs. With at most $k$ explicit demand pairs, our adjacency-array algorithm uses $\OO(n+\min\{m,n^{3/2}\sqrt{k}\})$ queries; a matching lower bound holds for every $1\le k\le\lfloor n/2\rfloor$ and sufficiently large $n$, with constants uniform in $k$. In particular, the $k=1$ case gives an $\OO(n^{3/2})$ query algorithm for prescribed $s$--$t$ cut. The upper bound combines degree-sensitive spectral estimates of local improvement with refinement by unions of label classes. These steps retain every original optimum and permit exact acquisition without an additional label-count factor. Separately, we prove an $Ω(n^{3/2})$ global minimum-cut lower bound on dense connected graphs, matching the existing upper bound up to polylogarithmic factors. It holds for the value and for any optimum shore, even with known degrees and sorted neighbor arrays; regular hard instances have balanced optimum cuts. Both lower bounds use degree-preserving switches and classify optimum outputs across a hidden threshold. Our upper bound concerns input queries, not total running time: computation on acquired data may be exponential, even in the single-demand case. Matching bounds at each prescribed sparse edge count are not established.

0.12

Faster Minimum k-Cut I: Simple and Sparse Weighted Graphs

cs.DS ·2026-08-17 ·Jason Li, Trevor Vaughn
similarity 0.69
Abstract

The minimum $k$-cut problem asks for the fewest edges whose removal leaves an input graph with at least $k$ connected components. Previously, the best algorithm for simple graphs ran in $O_k(n^{(1-\varepsilon)k+O(1)})$ time~\cite{HL22}, showing that the \(n^k\) barrier can be broken up to a polynomial overhead. We give the first $\widetilde O_k(n^{ck})$-time algorithm for Minimum $k$-Cut on simple graphs for an absolute constant $c<1$. More precisely, the running times are $\widetilde O(n^2)$ for $k=3$, $\widetilde O(n^{55/19})$ for $k=4$, and $\widetilde O(n^{4.112007})$ for $k=5$; for every $k\ge6$, the running time is \[ k^{O(k^2)}n^{1+(6k-6)\frac{k-1.749614}{7k-10}}(\log n)^{O(k^2)}, \] whose exponent is $\frac67k-0.132\ldots+O(1/k)$. The algorithm combines three ingredients. First, for weighted Minimum $k$-Cut we give a randomized \[ k^{O(k^2)}n^{k-2}(m+n)\log^3(n) \] -time algorithm: it perturbs the edge weights so that any minimum $k$-cut has a side with boundary strictly smaller than average. These then cut few edges of some tree in a logarithmic-size sample from a tree packing with high probability. After we enumerate them, we recursively compute $(k-1)$-cuts to complete them to the $k$-cuts of which they were a part. A variant of the perturbation and processing the entire packing support give a deterministic $k^{O(k^2)}n^{k+O(1)}$-time variant. Second, for cut size $s$, we give an improved FPT algorithm using a near-linear-time construction of an $(O(s\log^2 n\log\log n),s)$ edge-unbreakable tree decomposition with $O(s\log^2 n\log\log n)$ adhesion; this also gives a near-linear-time approximation algorithm for Minimum $k$-Cut. Third, we refine the border/island framework of~\cite{HL22}, using rectangular matrix multiplication to recover singleton islands and balancing it against the improved FPT algorithm.

0.36

A Linear-Time Approximation Scheme for the Densest Subgraph Problem

cs.DS ·2026-08-11 ·Elena Grigorescu, Mehrshad Taziki
similarity 0.67
Abstract

In the undirected \emph{Densest Subgraph Problem (DSG)} the goal is to output a subset $S$ of vertices of a given graph $G$ that maximizes the quantity $|E(S)|/|S|$, where $E(S)$ is the set of edges in the subgraph induced by $S$. The problem is well studied in both theory and practice, and it admits natural efficient exact algorithms, as well as near-linear time algorithms with a $(1-\varepsilon)$ approximation ratio. However, all previously-known approximation schemes incur logarithmic factors in the size of the graph or other parameters of the graph. This raises the question of whether a linear time $(1-\varepsilon)$-approximation can be obtained for all $\varepsilon>0$. We answer this question affirmatively by providing a $(1-\varepsilon)$-approximation algorithm running in time $O\left(\frac{n+m}{\varepsilon^3}\log \frac{1}{\varepsilon}\right)$, where $m$ and $n$ are respectively the number of edges and vertices of $G$. To the best of our knowledge, this is the first truly linear-time approximation scheme for the problem (when $\varepsilon>0$ is a constant). Our algorithm uses assignments arising from a flow-based formulation together with a structural carving lemma. This lemma allows us to progressively carve "sparse" parts of the graph while nearly preserving the densest subgraph, allowing us to shift heavy computations to smaller instances, which eventually yields the mentioned runtime. Our framework also yields a $(1/2 -\varepsilon)$-approximation for the \emph{Densest At-Least-$k$ Subgraph Problem}, where in addition to maximizing the density, we require the subgraph to have at least $k$ vertices. Our algorithm runs in time $O\left( \frac{(n+m) \log^2 n \log \frac{1}{\varepsilon}}{\varepsilon} \right)$. This nearly matches the known $1/2$ approximation hardness while running in near-linear time.

0.04

Differentially Private All-Pairs Min Cut Values

cs.DS ·2026-11-05 ·Anders Aamand, Justin Y. Chen, Mina Dalirrooyfard, Slobodan Mitrović, Sandeep Silwal +1 more
publishedtheory similarity 0.67
Abstract · To appear in SOSA 2027

We study the problem of privately releasing the min cut values of all pairs of vertices in a given $n$-node weighted graph, under the edge-neighboring model. Straightforward application of advanced composition yields an approximate DP algorithm that outputs all min cut values up to $\tilde{O}(n)$ additive error. Prior works [Dalirrooyfard, Mitrovi{ć} and Nevmyvaka, 2023; Aamand et al., 2026] have established that $\tildeΘ(n)$ is the correct bound if the algorithm also needs to output cuts that realize the approximate min cut values. On the other hand, simply outputting the values could be an easier problem, but prior algorithms have been stuck on the $\tilde{O}(n)$ bound. In this work, we give an approximate DP algorithm outputting all-pair min cut values with $\tilde{O}(\sqrt{n})$ additive error, beating the linear error barrier. Our algorithm applies the sparse vector technique [Dwork and Roth, 2014] to maintain a hierarchical decomposition of the vertices based on the min cut structure. We also prove an $Ω(\log^{3/2} n)$ lower bound for this problem.

0.35