CS Paper Radar

Finding and Certifying Weighted Minimum Cuts with Cut Queries

Troy Lee

cs.DS ·submitted 2026-11-02 13:27 UTC · v2

Abstract

We study the deterministic and nondeterministic cut query complexity of minimum cut in undirected graphs with arbitrary nonnegative edge weights. For the nondeterministic case, we show that every $n$-vertex graph has an $O(n\log^2(2n))$-query certificate of its exact global minimum-cut value, such that any other nonnegatively weighted graph on the same vertex set that agrees on these queries has the same minimum cut value. A key ingredient is a way to certify a maximum $s$--$t$ flow value with only $O(n)$ cut queries. For the deterministic case we give an algorithm that finds an exact global minimum cut using $O(n^{3/2}\log^3(2n)(\log\log(2n))^2)$ cut queries. Previously no $O(n^{2-\varepsilon})$ deterministic bound was known for arbitrary nonnegatively weighted graphs. The algorithm follows Karger's two-respecting tree approach. The key new ingredient is a deterministic construction of a weak skeleton of the input graph $G$: an explicit weighted graph $H$ in which every minimum cut of $G$ is a $5/4$-approximate minimum cut.

Comment
57 pages. v2: corrects cross-reference names (some lemmas, remarks, definitions and corollaries were labelled "Theorem"); no change in content

Closest papers

Nearest neighbours by meaning across the whole index.

Deterministic Global Minimum Cut Using $\tilde{O}(n^{3/2})$ Cut Queries

cs.DS ·2026-10-16 ·Yotam Kenneth-Mordoch
published similarity 0.80
Abstract · Accepted at SOSA 2027

Finding a global minimum cut in an unweighted graph is a fundamental task in the cut-query model. While there exists a randomized algorithm for this task using $\tilde O(n)$ queries, known deterministic algorithms use $\tilde{O}(n^{5/3})$ queries. We improve upon this result and give a simple deterministic algorithm that finds a global minimum cut using $\tilde O(\min\left\{ nδ,n^2/δ\right\})$ cut queries, which equals $\tilde{O}(n^{3/2})$ in the worst case, where $δ$ is the minimum degree of the graph. The key ingredient in our approach is an efficient maximum $s,t$-flow algorithm, for the case when the minimum $s,t$-cut has value at most $δ$.

0.28

Query Complexity of Densest Sub(hyper)graph Problems

cs.DS cs.CC ·2026-10-13 ·Sinan G. Aksoy, Eli Friedman, Nate Veldt, Stephen J. Young
theory similarity 0.77
Abstract · 26 pages

Rubinstein et al. introduce the study of connectivity and minimum cut problems in the cut query model, where an algorithm can only access the edges of a graph through CUT queries. In this work, we examine the query complexity of densest subgraph problems. Our first contribution is to generalize the uniform sparsification approach for Densest Subgraph and other heavy subgraph problems to weighted graphs, achieving the following results. >A $(1+\varepsilon)$-approximation for weighted Densest Subgraph in $O(n\log^2 n/\varepsilon^2)$ queries, roughly matching the $Ω(n/\log n)$ lower bound we prove for randomized algorithms. >A $(1+\varepsilon)$-approximation for weighted Max Cut in $O(n\log^2 n/\varepsilon^2)$ queries. This improves upon the bound of $O(n\log^3 n(\log n+1/\varepsilon^2))$ queries achieved by Plevrakis et al., making significant progress towards their lower bound of $Ω(n/\log n)$ queries. In contrast, we rule out approximation schemes with truly subquadratic query complexity for Densest $k$-Subgraph and settle its exact query complexity in both the unweighted and deterministic settings. For hypergraphs, we show CUT queries alone cannot achieve $o(\sqrt{n})$-approximation for Densest Subhypergraph or $o(n)$-approximation for Densest $k$-Subhypergraph, regardless of the number of queries. Augmenting CUT queries with the EDGE oracle of Chen et al., we overcome this barrier for Densest Subhypergraph and obtain a $(1+\varepsilon)$-approximation on rank-$r$ hypergraphs using $O(nr\log n/\varepsilon^2)$ queries. We also extend our Densest $k$-Subgraph hardness results to hypergraphs and prove exponential query lower bounds for exact Densest $k$-Subhypergraph. Lastly, confirming a conjecture of Chakrabarty and Liao, we show that simulating an ADD query using CUT and IS-EDGE$^?$ queries requires exponentially-many queries.

0.24

Directed Global Minimum Cut in Almost-Linear Time

cs.DS ·2026-10-07 ·Henry Fleischmann, Jason Li, Thatchaphol Saranurak, Benyu Wang
highly cited similarity 0.74
Abstract · 11 pages, 4 figures

We give a randomized reduction from global minimum cut in a directed graph with $n$ vertices and $m$ weighted edges to maximum-flow computations on graphs of total size $\widetilde{O}(m)$. For polynomially bounded integral weights, this yields the first almost-linear $m^{1+o(1)}$-time algorithm [vdBCK+23], improving the previous $m^{1+o(1)}\min\{\sqrt{n},n/m^{1/3}\}$ bound [CLN+22]. Previous work reduced finding the minimum cut to constructing a 1-respecting arborescence, a directed spanning tree with exactly one edge crossing a minimum cut [CLN+22]. They then construct such a tree by sampling from a $(1+ε)$-approximate arborescence packing, which currently requires superlinear time. Our algorithm sidesteps constructing the packing entirely and relies on a novel iterative arborescence sampling procedure. We show that, after $O(\log n)$ rounds of sampling, our final arborescence 1-respects the minimum cut with constant probability.

0.48

Tight Quantum Query Bounds for Minimum Cut and Multicut on Dense Graphs

cs.DS cs.CC ·2026-11-13 ·Tianhang Lu, Runtian Ren, Shengcai Liu
theory similarity 0.73
Abstract

We determine the dense worst-case quantum query complexity of exact minimum multicut on simple unweighted undirected graphs. With at most $k$ explicit demand pairs, our adjacency-array algorithm uses $\OO(n+\min\{m,n^{3/2}\sqrt{k}\})$ queries; a matching lower bound holds for every $1\le k\le\lfloor n/2\rfloor$ and sufficiently large $n$, with constants uniform in $k$. In particular, the $k=1$ case gives an $\OO(n^{3/2})$ query algorithm for prescribed $s$--$t$ cut. The upper bound combines degree-sensitive spectral estimates of local improvement with refinement by unions of label classes. These steps retain every original optimum and permit exact acquisition without an additional label-count factor. Separately, we prove an $Ω(n^{3/2})$ global minimum-cut lower bound on dense connected graphs, matching the existing upper bound up to polylogarithmic factors. It holds for the value and for any optimum shore, even with known degrees and sorted neighbor arrays; regular hard instances have balanced optimum cuts. Both lower bounds use degree-preserving switches and classify optimum outputs across a hidden threshold. Our upper bound concerns input queries, not total running time: computation on acquired data may be exponential, even in the single-demand case. Matching bounds at each prescribed sparse edge count are not established.

0.12

Faster Minimum k-Cut II: Improved Randomized and Deterministic Algorithms for Weighted Graphs

cs.DS ·2026-08-17 ·Trevor Vaughn
similarity 0.73
Abstract

The Minimum $k$-Cut problem asks for a minimum-weight set of edges whose removal leaves an undirected weighted graph with at least $k$ connected components. We consider only $k\ge3$. The fastest previous algorithm for weighted graphs ran in $n^{k-2}(m+n)(\log n)^{O(k^2)}$ randomized time~\cite{LV26}; on dense graphs this is $\widetilde O_k(n^k)$, and for $k=3$ it gives an $\widetilde O(nm)$-time algorithm. We improve the dense-graph exponent from $k$ to $k-1$ and obtain the same exponent deterministically. After aggregating parallel edges in $O(m)$ time, our randomized algorithm runs with high probability in \begin{equation*} k^{O(k^2)}n^{k-1}\log^2n \end{equation*} time, while our deterministic algorithm runs in \begin{equation*} k^{O(k^2)}n^{k-1}\log^{O(1)}n \end{equation*} time. In particular, weighted Minimum $3$-Cut can be solved in $O(n^2\log^2 n)$ randomized time and in $\widetilde O(n^2)$ deterministic time. The algorithms have two main components. First, we give a faster algorithm for weighted Minimum $3$-Cut. After handling optima with a very small side and optima with two light sides, the remaining optimum has a unique structured side. Tree packing reduces its completion to a batched collection of $2$-respecting cut problems. Second, we reduce Minimum $k$-Cut to Minimum $3$-Cut by enumerating a bounded family of light-cut candidates and recursively completing either side of each candidate. If the enumeration produces too many cuts, then we can instead produce an optimum $k$-cut directly. We derandomize the $3$-cut algorithm using a deterministic near-minimum-cut skeleton, and derandomize the reduction using a specialized $4$-cut algorithm using the skeleton, the constructive light-cut bounds, and the deterministic spectral sparsifier of \cite{BSS12}.

0.23

A Simple Subquadratic Cut Query Protocol for Directed Reachability

cs.DS ·2026-11-04 ·Henry Fleischmann, Sagnik Mukhopadhyay, Swagato Sanyal
similarity 0.69
Abstract · 17 + 22 pages

We study $s$--$t$ reachability in an unweighted directed graph on $n$ vertices, accessed through a directed cut oracle: given $S\subseteq V$, the oracle returns the number of edges directed from $S$ to $V\setminus S$. Directed cut functions are submodular, and reachability asks whether the minimum $s$--$t$ cut has positive value. This connects the problem to the query complexity of submodular function minimisation. Whether or not reachability can be solved in truly subquadratic query complexity has been an outstanding open question for a decade. We give a simple algorithmic blueprint with two randomised implementations. The first uses $\widetilde O(n^{9/5})$ outgoing-cut queries; the second improves this bound to $\widetilde O(n^{5/3})$. The common idea is to construct an alternative orientation with the same underlying undirected graph and vertex-wise degree imbalances, thereby preserving reachability. We first approximate the target imbalances using an averaging and rounding procedure, then correct the remaining error with a flow. An earlier manuscript, made available in August 2026 in an online AI repository, reports an $\widetilde O(n^{3/2})$ query bound. Our contribution is a simple and comprehensible alternative approach that already achieves a polynomial saving over quadratic query complexity.

0.54

Improved Approximation and Hardness Results for the Monitoring Edge-Geodetic Set Problem

cs.DS ·2026-10-20 ·Davide Bilò, Giordano Colli, Stefano Leucci
theory similarity 0.69
Abstract · 18 pages, 4 figures

We study the \emph{Monitoring Edge-Geodetic Set} problem (MEG-Set), which asks for a minimum-cardinality set $M$ of vertices of an undirected graph $G$ of $n$ vertices such that every edge of $G$ belongs to all shortest paths between some pair of vertices in $M$. We present new approximation and hardness results for MEG-Set. On the positive side, we design a deterministic polynomial-time $O(n^{1/3}\log^{2/3}n)$-approximation algorithm, improving upon the previously best-known $O(\sqrt{n\log n})$ approximation ratio. On the negative side, for every constant $\varepsilon \in (0,1)$, we prove that the problem admits no polynomial-time $\big(2^{\log^{1-\varepsilon} n}\big)$-approximation algorithm, unless $\mathsf{NP}\subseteq \mathsf{DTIME}(n^{\operatorname{polylog} n})$. This substantially improves upon the previously known logarithmic inapproximability bound. We also prove that \megset is $\mathsf{NP}$-hard on planar $2$-degenerate graphs, whereas $\mathsf{NP}$-hardness was previously known for $1$-apex $2$-degenerate graphs. We conclude by observing a connection between monitoring edge-geodetic sets and subsetwise distance preservers, i.e., subgraphs that preserve distances between all pairs of vertices in $S\subseteq V(G)$. Specifically, we show that any upper bound on the size of the latter yields a lower bound on the size of the former.

0.23

Quasi-polynomial-sized vertex multicut-mimicking networks and kernelization for Vertex Multiway Cut

cs.DS ·2026-11-05 ·Eduard Eiben, Roohani Sharma, Magnus Wahlström
survey similarity 0.68
Abstract

We give deterministic polynomial-time constructions of vertex multicut-mimicking networks of quasi-polynomial size. Given a graph G, a terminal set T, and a positive integer c, our algorithm constructs a graph with |T|^7 c^{O( log c ) } vertices that preserves every minimum vertex multiway cut value of at most c, for every partition of the terminals. Setting c=|T| gives an exact vertex multicut-mimicking network with |T|^{O( log |T| ) } vertices, resolving an open question of Wahlström [ACM Transactions on Algorithms 2022], who showed a bound of κ^{O( log^3 κ)} for the edge multicut-mimicking variant, where κ:= \sum_{t \in T} |N_G(t)| is the capacity of the terminal set, which was later improved to κ^{O( log^2 κ)} by Anand, Lee, Li and Saranurak [STOC 2024]. As applications of our vertex multicut-mimicking network, we obtain deterministic kernels of size k^{O( log k )} for Vertex Multiway Cut, p^{O(1)} k^{O(log k)} for Vertex Multicut with p requests and |Γ|^{O(1)} k^{O( log k)} for Group Feedback Vertex Set, where k is the deletion budget and Γis a finite group. Our first kernelization result, in particular, resolves an open question by Wahlström [ACM Transactions on Algorithms 2022], which was reiterated in a recent survey on kernelization by Jansen [Computer Science Reviews 2026]. Also, to the best of our knowledge, our kernel for Vertex Multicut is the first one whose size is completely polynomial in p and (quasi-polynomial) super-polynomial only in k. Finally, again using our vertex multicut-mimicking network for graphs, we obtain a hyperedge multicut-mimicking network for hypergraphs, which preserves hypergraph edge-multicuts of size up to c, of size |T|^{O(1)} c^{O(log c)}. Our result removes the dependence on the rank of the hypergraph from the exponent of the size bound, that existed in prior work.

0.29