CS Paper Radar

Stereo LWIR-RGB Automatic Labeling for Low-Light Camera-Based VRU Detection

Dimitrios Bouzoulas, Pyry Jäppinen, Pejman Habibiroudkenar, Eerik Alamikkotervo, Risto Ojala

cs.CV ·submitted 2026-10-16 15:31 UTC · v1

Abstract

VRU detection in low-light conditions is a key component in ensuring VRU safety during the most collision prone time of the day. Currently, advances in low-light detection are limited due to the lack of large scale datasets and automated labeling methods. Most autolabeling methods use RGB detections as their labels source, which cannot be replicated in low-light conditions. To fill this gap in this paper we present an automated pipeline for low-light VRU labeling. We use LWIR-RGB image pairs and source our labels from LWIR as VRUs differentiate from the background due to their body temperature. Unlike our previous work that relied on a complex hardware setup to align the two modalities, we perform this experiment using a LWIR-RGB stereo setup, lowering hardware complexity and cost, making the pipeline easier to reproduce. We evaluate method end-to-end on a dataset collected in the capital region of Finland. Models trained on our generated labels beat both off-the-shelf baselines and models fine tuned on a hand labeled subset on F1, mAP@50 and LAMR metrics when tested on a manually labeled dataset, and the result holds for two different LWIR detectors. This shows that low-light VRU autolabeling can be made both accessible and effective without specialized alignment hardware.

Closest papers

Nearest neighbours by meaning across the whole index.

3L-D: A Low-Light Level Dataset from a Sensor-Agnostic, Alignment-Preserving Acquisition Framework

cs.CV cs.DB ·2026-11-02 ·Léo Rueff, Maurgène Ghezal, Valentin Gorse, Astrid Dufaure, Esteban Monsalvo +2 more
dataset similarity 0.64
Abstract

Supervised low-light image and video enhancement has achieved remarkable progress, yet current models remain fundamentally constrained by the limitations of existing datasets. Prevailing methods typically rely on uncontrolled ambient captures, camera parameter manipulation (e.g., exposure or ISO adjustments), or neutral density filters, failing to replicate authentic night-sky near-infrared spectral content and genuine low-photon noise distributions. Furthermore, capturing dynamic paired sequences without introducing warping artifacts or sensor-specific biases remains an open challenge. In this paper, we introduce 3L-Dataset, a physically calibrated low-light image and video dataset generated using a modular, sensor-agnostic acquisition framework. Our test bench faithfully reproduces the standardized Midavaine night level scale from Level 1 (full moon, approximately 1000 mlx) down to Level 5 (overcast moonless night, approximately 0.1 mlx), spanning the visible to near-infrared spectrum across diverse realistic environments, including countryside, forest, urban, and desert scale models. Using high-precision programmable mechanical actuation, our acquisition framework guarantees sub-pixel spatial alignment across synchronized sextuplets, each composed of one reference image and five corresponding images acquired at the five standardized night levels, without post-processing image warping. We evaluate multiple representative deep learning baselines across varying night levels, revealing critical trade-offs between reconstruction fidelity, perceptual quality, and inference latency under severe photon starvation. The modular acquisition framework can be adapted to different cameras, optical systems, sensor technologies, and resolutions, enabling the dataset to be continuously expanded.

0.32

A General Pipeline for Dense Illuminant Estimation via Physically Based Synthetic Data

cs.CV ·2026-10-05 ·Luca Cogo, Gianmarco Corti, Simone Bianco, Raimondo Schettini
published similarity 0.61
Abstract · Accepted at the 34th Color and Imaging Conference (CIC 2026), hosted by the Society for Imaging Science and Technology (IS&T)

Illuminant estimation is a fundamental problem in computational photography, as it enables the correction of color shifts induced by varying lighting conditions. While learning-based methods have demonstrated strong performance, their progress is hindered by the limited availability of large-scale datasets with accurate illuminant ground-truth. In this work, we propose a general and reusable pipeline to derive dense illuminant chromaticity maps from physically based 3D-rendered scenes. By repurposing an existing 3D scene collection, our approach enables the systematic generation of pixel-wise illuminant annotations under controlled lighting conditions, effectively lowering the barrier to data acquisition for learning-based illuminant estimation. Using this pipeline, we generate a large-scale synthetic set of 74,321 images, which we employ for pre-training both single- and multi-illuminant estimation models. Extensive experiments with state-of-the-art architectures show that synthetic pre-training consistently improves performance, with gains of up to 28% for single-illuminant estimation and up to 57% for multi-illuminant estimation, particularly in data-scarce regimes. These findings demonstrate that synthetic data generation pipelines offer an effective and scalable solution for the pre-training of illuminant estimation methods.

0.17

Towards Privacy-Preserving Thermal Human Perception from Dataset to Deployment

cs.CV eess.SP ·2026-10-10 ·Kailai Sun, Yue Cui, Xinwei Wang, Zijie Gao, Baoshen Guo +6 more
code/datahot direction similarity 0.60
Abstract

Indoor human perception is the foundation for smart homes and healthcare. However, RGB cameras raise privacy concerns in private indoor environments, while low-resolution thermal cameras provide limited spatial and semantic information. Large-scale indoor thermal datasets and real-world deployments remain limited. Here, we introduce Indoor RGB-T, a large-scale paired RGB--thermal dataset for indoor human perception. The dataset covers 20 indoor rooms and contains 90,576 80x62 thermal frames, 87,016 temporally matched RGB--thermal pairs, and 115,557 annotated human bounding boxes. We establish benchmarks for robust thermal occupant-state detection with 0.75 mAP and occupancy estimation with an accuracy of 0.847 in unseen rooms. We further evaluate RGB-to-thermal and thermal-to-RGB translation, achieving a temperature MAE of 0.654 C and an R2 of 0.923. Finally, we deploy the thermal perception model on a commercial sleep-monitoring system in the real world. Field testing with 100 participants and deployment of approximately 1,000 devices further demonstrate its practical feasibility. We identify practical challenges that motivate future research directions, including environmental thermal interference, sensing range and multi-person occlusion. The code, trained models and partial dataset are available at https://github.com/kailaisun/RGBT and https://huggingface.co/skl24/RGBT.

0.41

TriNetra: Thermal-Reliability-Guided RGB-Thermal Fusion and Tracking for Surveillance

cs.CV ·2026-11-06 ·Sadique Khatib, Aditya Ahirrao, Vedant Sonawane, Disha Kapse, Y. D. Bhise
benchmark similarity 0.59
Abstract

Visible cameras fail at night and thermal sensors fail under saturation, blur or loss of contrast, yet most RGB-thermal (RGB-T) detectors mix the two streams with fixed weights and cannot tell when one modality has become unreliable. TriNetra is a reliability-aware surveillance framework built around this problem. The proposed solution computes a frame-level Thermal Reliability Coefficient (TRC) from five label-free image cues, uses it to gate the thermal features of a dual-branch YOLOv8m detector whose visible branch, neck and head are frozen and COCO-pretrained, and passes the same score to a ByteTrack-based tracker that feeds a rule-based behaviour analyser. On the M3FD benchmark (2,940/630/630 split) the detector reaches 87.6% precision, 79.4% recall, 70.0% mAP@50 and 47.8% mAP@50:95 on the test split, with 17.0 M of its 42.9 M parameters trained. TRC stays near 0.78 on clean frames (standard deviation 0.012), decreases with the severity of thermal saturation and blur, reaching 0.53 and 0.69 at full severity, and is insensitive to RGB-thermal misalignment. With identical weights, the adaptive gate matches a fixed gate on clean data (70.0% versus 69.8% mAP@50) but keeps 43.6% mAP@50 when the thermal stream is corrupted, against 38.4%, 29.2% and 25.0% for a fixed gate, full thermal admission and a closed gate; the 5.1-point gain over the fixed gate has a 95% bootstrap confidence interval of +3.6 to +6.5 points. In tracking, the TRC-gated association performs on par with ByteTrack on a synthetic benchmark with exact ground truth and on 14 M3FD clips, and is slightly less stable under thermal saturation, so its measured benefit is confined to the detector. The limitations of the current evaluation are reported together with the results.

0.23

Physically Guided TeX Generation for Low-Light Visual Tasks

cs.CV ·2026-11-07 ·Daoheng Li, Jianjun Qian, Mengkai Yan, Jian Yang
similarity 0.59
Abstract

Low-light conditions reduce visible contrast and obscure details, while infrared images lack color and texture, motivating the fusion of infrared and visible information for visual tasks. Existing fusion methods primarily optimize image appearance or task-specific features without explicitly disentangling the coupled factors underlying thermal observations, limiting their physical interpretation under thermal degeneracy. Hyperspectral thermal measurements enable physical decomposition, but they require specialized imaging hardware, while pixel-level physical annotations for supervision or evaluation incur additional costs. We propose TeX-Gen, a physically guided framework for TeX generation from paired visible and infrared images in low-light visual tasks. TeX Generation constructs complementary multi-view features and employs independent branch-specific gates to route cues into the Temperature, Emissivity, and Texture maps. TeXMetric integrates radiometric reconstruction, channel structure, and material consistency to assess the generated maps without requiring pixel-level physical labels. TeX Tune improves performance through task-guided adjustments, jointly optimizing the adjustment modules and task network while keeping the generator frozen. Experiments show that TeX-Gen achieves competitive task performance in low-light environments on the FLIR, LLVIP, M3FD, and MSRS datasets. Experiments on HADAR also examine the association between TeXMetric scores and downstream detection performance.

0.14

Boundary-Continuous Cross-Camera RGB Mapping via Hue-Split Model Trees

eess.IV cs.CV ·2026-08-12 ·Yuma Kinoshita, Hitoshi Kiya
published similarity 0.58
Abstract · Accepted to APSIPA ASC 2026. 6 pages, 4 figures

We propose a hue-split model-tree method for boundary-continuous cross-camera RGB mapping. Cross-camera RGB mapping aims to produce consistent color representations across cameras whose recorded RGB values differ due to sensor spectral sensitivities and image-signal processing pipelines. A common chart-based remedy is to estimate a single global affine color correction matrix (CCM), but such a global model cannot capture hue-specific discrepancies between cameras. To capture that behavior, we recursively partitions the source-camera color space along a scalar hue coordinate and builds an model tree that stores an affine CCM at every node. For fitting the node CCMs, we utilize a log-domain error objective. To prevent false contours that arise from hard hue splits, we further introduce a boundary-continuous formulation in which the prediction is obtained by blending the log-domain outputs of all node CCMs along the root-to-leaf path. The path-wise blending weights are optimized under a simplex constraint using both a chart-pair fitting loss and an explicit continuity regularizer defined on deterministic boundary prototype pairs placed just on either side of each learned hue threshold. We conducted an experiment on a Canon EOS-1Ds Mark II to Canon EOS 20D mapping using the Middlebury Registered Color Checker dataset. The results show that hue splitting substantially reduces log-RMSE over a single global affine CCM and that the proposed path blending with boundary prototype regularization simultaneously improves accuracy and suppresses chromaticity gaps at the learned hue thresholds across two illuminants and multiple exposure conditions.

0.22

PiLLVD: A Real-World Low-Light Video Dataset for Dynamic Scenes Captured with Off-the-Shelf Cameras

cs.CV eess.IV ·2026-11-12 ·Yaser Abu Awwad, Paul L. Rosin, Oktay Karakuş
benchmarkdataset similarity 0.58
Abstract · 14 pages, 7 figures, 5 tables. Dataset available on Zenodo: https://doi.org/10.5281/zenodo.23015904

Low-light image and video enhancement has received increasing attention in recent years. However, most existing enhancement methods are developed and evaluated on still images, while progress in low-light video enhancement remains limited by the lack of real-world paired video datasets. Acquiring paired low-light and normal-light video sequences is challenging because it requires spatially and temporally aligned captures while avoiding motion blur, exposure mismatch, and correspondence errors in dynamic scenes. To address this gap, we introduce PiLLVD, the Pi-based Low-Light Video Dataset, a paired low-light video dataset captured using an accessible Raspberry Pi-based multi-camera system with off-the-shelf cameras. PiLLVD provides paired low-light and aligned normal-light reference sequences for dynamic indoor and outdoor scenes, including diverse human and object motion under varying illumination conditions. Unlike existing datasets that are often image-based, static, synthetic, or limited to simple motion patterns, PiLLVD focuses on motion-rich scenes where frame-to-frame stability and motion-related artefacts are important for evaluation. In addition to presenting the dataset and acquisition pipeline, we benchmark representative pre-trained low-light video enhancement methods on PiLLVD under a zero-shot setting. The results show that existing methods do not generalise uniformly across the proposed sequences, highlighting the challenges posed by the proposed dataset and its value for both benchmarking existing methods and supporting the development of future low-light video enhancement algorithms.

0.22

Real-World Perception for Autonomous Driving in Adverse Weather: Enhancing Standard Detectors via Foundation-Guided Auto-Annotation

cs.CV ·2026-09-22 ·Sepideh Gohari, Goodarz Mehr, Azim Eskandarian
benchmark similarity 0.58
Abstract · Submitted to IEEE for review

Standard deployment-ready object detectors for autonomous vehicles degrade in adverse weather and lighting conditions without being trained on extensive domain-specific data. While large-scale vision foundation models offer robust zero-shot generalization, their high computational cost makes them impractical for real-time deployment. To bridge this gap, we propose a foundation-guided auto-annotation pipeline that enhances standard detectors without architectural changes. We first benchmark three distinct models, YOLOv8, Co-DETR, and SAM3, on our custom real-world driving dataset spanning 25 unique operational scenarios across various route, weather, and lighting conditions. Based on our analysis, SAM3 demonstrates superior accuracy and resilience across all scenarios. Thus, we deploy it as an offline auto-annotator to generate pseudo-labels on the unannotated subset of our dataset. Fine-tuning the baseline YOLOv8 on these annotations yields a 16.04% higher overall mean Average Precision (mAP) and improves cross-environmental stability compared to the baseline model, highlighted by a 32.73% and 28.65% mAP increase in Residential Direct Sunlight and Highway Fog, respectively. These results demonstrate that standard detectors can achieve environmental resilience without the need for extensive manual annotation or architectural modifications.

0.20