CS Paper Radar

Adaptive Rejection of Unknown Hybrid Sinusoidal Disturbances with Application to Humanoid Walking under Unknown Ground Motion

I-Chia Chang, Jacob Stewart, Petros A. Ioannou, Yan Gu

cs.RO ·submitted 2026-09-22 18:51 UTC · v1

Abstract

Legged robot control is not yet practical in non-inertial environments, where the ground and surroundings accelerate in the inertial Earth frame, mainly because of the unknown, time-varying, persistent perturbations caused by environmental motion, compounded by the associated hybrid robotic dynamics. We formulate the problem of robot walking control as unknown-disturbance rejection for hybrid linear systems subject to hybrid sinusoidal disturbances (i.e., a linear combination of sinusoidal components with instantaneous phase jumps at discrete events). First, necessary and sufficient conditions for solvability of the disturbance rejection problem are derived and used to characterize the control input that rejects the disturbances. Second, with the Youla-Kucera parametrization, an output feedback controller capable of rejecting the disturbance is introduced. Third, an adaptive law is proposed to estimate the controller parameters that reject the disturbance in the practical case where the disturbance and its parameters are unknown. Experiments on bipedal walking during ground motion demonstrate substantially improved body-position tracking accuracy, with an average improvement of over 60% in simulations and up to 47% in real-world experiments.

Closest papers

Nearest neighbours by meaning across the whole index.

Online iLQR-MPC with Whole-Body Control for Robust Humanoid Locomotion

cs.RO ·2026-11-03 ·Xiang Li, Linlin Ou, Ruihan Wu, Xinyi Yu
similarity 0.62
Abstract

Humanoid locomotion requires deciding where to step and how to distribute contact forces. However, a disturbance can invalidate the nominal plan, requiring coordinated revision under constraints that switch with every footfall. To solve this online, the proposed approach employs the single-rigid-body model, which retains attitude dynamics and the full contact wrench. An iterative linear-quadratic-regulator MPC (iLQR-MPC) then jointly optimizes contact forces and footstep locations in a single receding-horizon problem, without a separate step planner. Specifically, contact and motion constraints are incorporated into the backward pass through augmented-Lagrangian and relaxed-barrier penalties. A whole-body controller subsequently maps the plan to joint torques at 500 Hz while preserving contact feasibility. The model-based formulation makes disturbance responses interpretable through explicit costs and constraints, and requires no platform-specific policy training. In MuJoCo simulations, the iLQR-MPC replans at 100 Hz (mean solve time 8.9 ms); the Unitree G1 sustains steady-state walking and recovers from impulsive 245 N forward and 175 N lateral pushes.

0.18

Low-speed Limit Cycle Walking of Planar X-shaped Bipedal Robot with Special Properties

cs.RO ·2026-11-17 ·Fumihiko Asano, Cong Yan
published similarity 0.61
Abstract · 6 pages, 7 figures. Published in the Proceedings of IEEE ICARM 2023. This author version corrects bibliographic information and minor typogr…

This paper proposes a novel planar semicircular-footed X-shaped bipedal robot in which the center of mass of each leg link is at the same position as the hip joint, and discusses a method for generating a stable limit cycle gait on level ground. First, we outline the assumptions of the robot model with four degrees of freedom, and develop the mathematical equations of motion and collision. Second, we set the relative hip-joint angle as a control output and design a control system to follow it to the desired trajectory specified as a fifth-order function of time. Third, we mathematically show that there are special properties: the angular velocity of the swing leg does not change before and after the collision, and the time-integral of the control input becomes zero in a steady gait. We also mathematically show that the model has the feature that approximate linearization is effective and the antigravity effect of semicircular feet can be utilized. Through numerical simulations, we verify the validity of the theoretical results, and analyze some fundamental gait properties such as convergence speed and mechanical energy restoration.

0.36

Modeling and Control of a Rigid-soft Hybrid-link Humanoid Robot

cs.RO ·2026-10-10 ·Zewen He, Taiki Ishigaki, Ko Yamamoto
published similarity 0.60
Abstract

Physical flexibility plays a significant role not only in human motions but also in robot motions. For example, a humanoid robot with passive and flexible elements, which can be regarded as a rigid--soft hybrid-link system, has the advantages of storing energy and mitigating impact in a dynamic motion. However, the motion design and control of a hybrid-link system are challenging to achieve and have only been discussed in the literature. In this study, we propose the framework of inverse kinematics and compliance optimization-based control for a hybrid-link humanoid system that represents the continuous deformation of a flexible structure using the piece-wise constant strain (PCS) model. The proposed method was validated using forward dynamics simulations for standing, jumping, and walking motions. Then, we built an experimental setup using a biped humanoid robot with leaf-spring type prosthesis leg, in which the prosthesis deformation was measured by a motion capture system. Using this setup, we experimentally validated the proposed method for standing balance control in both double- and single-support cases.

0.45

Virtual model control for compliant reaching under uncertainties

cs.RO eess.SY ·2026-10-05 ·Yi Zhang, Daniel Larby, Fumiya Iida, Fulvio Forni
publishedhot directionhighly cited similarity 0.58
Abstract

Virtual Model Control (VMC) is an approach to design a controller for force-controlled robots in complex uncertain environments. While this method was primarily investigated for legged robot locomotion in the past, it can be more generally applicable to other types of robotic systems. This paper investigates the VMC framework for reaching tasks in a force-controlled robotic arm. We propose six different approaches to designing virtual models in order to achieve reaching tasks in environments with obstacles and uncertainties. A force-controlled 8 degree-of-freedom humanoid robot was used to validate the proposed approach in the real world. We conducted three experiments to test the performance of VMC controllers in terms of predictability, sensitivity to external force, and adaptability against known and unknown obstacles. Experimental analyses show that, even though the proposed approach needs to sacrifice accuracy and trajectory optimality, it enables us to design complex reaching motions under uncertainties, in an intuitive and extendable manner.

0.74

Anti-Gravity Walking by a Flying Humanoid Robot via Thrust-Rate Input Whole-Body Model Predictive Control

cs.RO ·2026-09-07 ·Kazuki Sugihara, Kei Okada
top venue similarity 0.57
Abstract

Flying humanoids are expected to perform tasks in diverse environments, while their existing locomotion is mainly limited to aerial flight and ground walking. The capability to move in complex three-dimensional space can greatly expand their application range. For such walking motion on ceilings and similar anti-gravity environments, whole-body MPC is effective. However, the discontinuous changes in dynamic structure accompanying contact switching during walking can induce thrust spikes, resulting in control instability. Therefore, in this work, we propose and implement a real-time whole-body MPC framework for anti-gravity bipedal walking. First, we formulate whole-body MPC using the time derivative of thrust, namely thrust-rate, as the control input. This formulation guarantees continuity of the thrust trajectory during contact switching while preserving the sparse structure of the optimal control problem for fast computation. Second, we address the lack of natural support forces in anti-gravity environments. We introduce lower bounds on the foot-normal component of the contact force, and smoothly transfer them during the doublesupport phase. Finally, we implement the proposed framework and demonstrate anti-gravity walking by a flying humanoid through simulation and a hardware experiment. To the best of our knowledge, this is the first demonstration of multi-contact whole-body MPC for a transformable aerial robot and walking by a flying humanoid beyond the ground.

0.39

Adaptive-MHE : A Sampling-Based Adaptive MPC for Legged Loco-Manipulation via Moving Horizon Estimation

cs.RO ·2026-09-15 ·Hossein Keshavarz, Alejandro Ramirez-Serrano, Majid Khadiv
similarity 0.56
Abstract

Legged robots have demonstrated a remarkable ability to traverse various terrains, yet generating effective loco-manipulation behaviors remains challenging. A key difficulty is that object and terrain parameters are typically unknown to the robot, and mismatches between these parameters and their simulated counterparts introduce a sim-to-real gap that degrades control performance. Classical system identification (Sys-ID) methods often assume differentiable dynamics, an assumption that does not hold for contact-rich legged systems. Sampling-based Sys-ID avoids this restriction by directly matching simulated and recorded state trajectories through massively parallel rollouts, but existing approaches are typically applied offline and do not adapt as environmental conditions change. We present Adaptive-MHE an online sampling-based Sys-ID framework, based on moving horizon estimation (MHE), that estimates the physical parameters of objects and terrain in the environment (e.g., mass, friction) and couples this estimate with a sampling-based model predictive controller, enabling adaptive loco-manipulation in changing and uncertain environments. In simulation and hardware experiments, our framework consistently outperforms baselines and matches the performance of a controller with access to ground-truth parameters.

0.26

Geometry-Aware Predictive Control for Walk-to-Run Bipedal Obstacle Crossing

cs.RO ·2026-10-11 ·Aashish Sahu, R. Prasanth Kumar
similarity 0.55
Abstract

This paper presents a geometry-aware predictive control framework for bipedal obstacle crossing across walking and running regimes. The proposed approach integrates a phase-structured trajectory generator with a constrained model predictive control (MPC) tracking layer to generate coordinated pelvis and swing-foot motions during obstacle traversal. The crossing process is represented through five interpretable phases: pre-crossing, leading-leg clearance, straddle, trailing-leg clearance, and recovery. Within this structure, swing-foot elevation is adapted as a function of obstacle height, while lateral stance widening and pelvis repositioning are introduced as functions of obstacle depth to improve transverse clearance and body alignment. A continuous gait-parameter evolution enables smooth walk-to-run transition without discrete controller switching. The generated references are tracked using MPC to regulate motion smoothness, clearance feasibility, touchdown behavior, and lateral admissibility. The framework is evaluated in reduced-order simulation over five progressively difficult obstacles under walking and running conditions. The robot successfully crosses the first four obstacles, achieving minimum body-obstacle clearances of 0.036, 0.036, 0.059, and 0.017 m, respectively. The fifth and most demanding obstacle leads to collision, identifying the current operating boundary of the proposed reduced-order formulation. Overall, the method provides a compact, interpretable, and computationally efficient basis for intelligent obstacle-aware bipedal locomotion.

0.24

Real-Time Control-Constrained DDP for Underactuated Balancing of Legged Robots

cs.RO math.OC ·2026-08-19 ·SeongWon Nam, Hyunyong Lee, Hansol Kang, Jiman Park, Yeongwoo Son +3 more
top venue similarity 0.55
Abstract · This version includes a minor correction to the notation in Eq. (2)

This paper presents a real-time control-constrained Differential Dynamic Programming (DDP) framework for underactuated legged robots. To address the limitation of classical DDP in handling control constraints, we propose an Accelerated Projected Gradient (APG)-based control-constrained DDP (ABC-DDP), which efficiently computes constrained solutions and identifies active sets without repeated Karush-Kuhn-Tucker (KKT) inversions. A virtual constraint is introduced to integrate control constraints within a feasibility-driven multiple-shooting framework, enabling stable optimization even from dynamically infeasible initializations. The proposed method supports real-time model predictive control (MPC) with short horizons under strong underactuation. Simulation results demonstrate static two-leg standing under external disturbances, along with diverse dynamic motions including slow catwalk, upright walking, and high-speed running within a unified MPC framework. To the best of our knowledge, this is the first demonstration of static two-leg standing of a quadruped robot achieved using real-time finite-horizon MPC.

0.43