CS Paper Radar

SPIRIT: Sparse Physics-Informed Inverse Rendering for SAR Imaging

Yimeng Liu, Maolin Gan, Jingkai Lin, Jialuo Du, Mi Zhang, Zhichao Cao

cs.CV cs.AI ·submitted 2026-10-01 16:38 UTC · v1

Abstract

Radio-frequency (RF) and wave-based imaging systems play a critical role in sensing under adverse conditions, but are fundamentally constrained by a trade-off between collection speed and spatial resolution. Reducing measurements to enable rapid collection of fragment geometric information across sensing dimensions, leading to highly non-injective inverse problems that destabilize conventional image-domain reconstruction and super-resolution methods. Synthetic aperture radar (SAR) exemplifies this challenge in sparse-aperture sampling. We introduce SPIRIT, a physics-informed inverse rendering framework for sparse-aperture SAR. Rather than enhancing formed images, SPIRIT reconstructs an explicit three-dimensional surface. By adopting an optimization strategy and explicitly modeling visibility, phase coherence, and wave propagation, SPIRIT aggregates distributed geometric features across sparse aperture views into a coherent reconstruction. Extensive experiments on synthetic and real-world data demonstrate that SPIRIT recovers accurate geometry and signal under extreme sparsity, reducing data collection by over 90% while achieving low geometric and signal error and consistently outperforming baselines.

Closest papers

Nearest neighbours by meaning across the whole index.

mmIR: Frequency-Space Inverse Rendering for 3D Millimeter-Wave Radar ADC Synthesis

cs.CV cs.GRcs.LGeess.SP ·2026-08-28 ·Adnan Armouti, Yixuan Gao, Rajalakshmi Nandakumar
top venuecode/data similarity 0.69
Abstract · Accepted to the European Conference on Computer Vision (ECCV) 2026. Project page: https://mmwave-inverse-rendering.github.io/

High-resolution 3D radar data is scarce. Commodity mmWave sensors use small antenna arrays that limit angular resolution to several degrees, and existing datasets provide only 2D range-azimuth maps or sparse point clouds rather than raw analog-to-digital converter (ADC) signals. Hardware scaling is expensive, synthetic-aperture scanning is impractical at fleet scale, and learned synthesis methods are bottlenecked by the very data shortage they aim to address. We present mmIR, an open-source differentiable frequency-modulated continuous-wave (FMCW) radar inverse renderer that fits a physics-based forward model to real captures and re-renders from dense virtual apertures to synthesize high-resolution 3D radar data. Because radar resolution is too coarse to recover geometry directly, mmIR performs LiDAR-assisted inverse rendering: using LiDAR-derived meshes as a geometric scaffold, mmIR optimizes per-vertex International Telecommunication Union (ITU) physics materials, vertex normals, and antenna beam patterns through end-to-end automatic differentiation of a phase-coherent multiple-input multiple-output (MIMO) forward model with multi-bounce propagation, polarization, and free-space diffraction. On seven outdoor and six indoor ColoRadar scenes, mmIR achieves 0.914 mean Pearson correlation on range-azimuth maps versus 0.307 for Sionna-RT. Scenes trained on a cascaded imaging radar transfer to a co-located single-chip radar without re-training (0.554 correlation), and dense virtual arrays (100x100 elements) produce single-frame 3D occupancy validated against LiDAR. Project page: https://mmwave-inverse-rendering.github.io/

0.75

Diffusion Meets Unrolling: Compressive SAR Image Reconstruction with Interleaved Learned Corrections

eess.IV ·2026-10-05 ·Odysseas Pappas, Andrew C. M. Austin, Perla Mayo, Mohammad Golbabaee, Alin Achim
similarity 0.67
Abstract

Compressive Synthetic Aperture Radar (SAR) imaging, typically formulated as an inverse problem and solved with traditional iterative optimisation methods, can be very computationally expensive. We investigate the use of denoising diffusion probabilistic models (DDPMs) for compressive SAR image reconstruction, where the diffusion model is guided by a poor initial reconstruction from sub-sampled data obtained via standard imaging methods. We augment this data-driven method with model-driven interleaved refinement processes, inspired by traditional compressed sensing (CS) methods, to enhance sparsity and heavy tails in SAR images. Experimental results on real ERS-1 SAR datasets demonstrate consistent improvements over baseline DDPM and state-of-the-art methods, with notable gains in reconstruction fidelity and structural similarity, while incurring only modest computational overhead. The proposed hybrid framework effectively combines the representational power and efficiency of diffusion models with the interpretability and robustness of model-based optimisation, enabling accurate compressive SAR imaging.

0.30

DP-JMRNet: A Deep Unfolding Network for Differential Phase Preservation in Sparse Bitemporal SAR Reconstruction

eess.SP eess.IV ·2026-08-27 ·Juncheng Bao, Zhen Zhang, George P. Petropoulos
code/data similarity 0.62
Abstract

Complex SAR imagery is usually visualized and evaluated mainly through its magnitude. Phase is retained in the complex data but is rarely treated as a direct image-quality objective. Existing sparse reconstruction methods typically focus on magnitude fidelity and single-epoch complex reconstruction accuracy. However, the phase difference between two acquisitions is what drives line-of-sight deformation retrieval in InSAR, from ground subsidence monitoring to earthquake deformation mapping. This paper proposes the Differential-Phase-Oriented Joint Masked Reconstruction Network (DP-JMRNet), which uses deep unfolding to reconstruct the two epochs jointly from masked observations under a differential-phase objective. An exchange-equivariant interaction module makes the reconstruction independent of epoch ordering. A coherence-aware gate opens cross-epoch sharing in coherent regions and closes it where the two epochs disagree. On simulated bitemporal SAR data, DP-JMRNet attains the lowest differential-phase RMSE at 30\%, 40\%, and 50\% sampling rate, while maintaining competitive amplitude and complex-image fidelity. This corresponds to a 47.5\%--51.3\% reduction over the best baseline, achieved with one third of its parameters. The same trend is validated on three Sentinel-1 scenes. A systematic study of acquisition design further shows that sharing the same aperture support across epochs is necessary for phase fidelity, whereas optimizing the sampling mask does not improve the differential phase. The code and data are available at https://github.com/JasonBao05/coherent-sar-unfolding.

0.28

UAV SAR Imaging via Diffusion Posterior Sampling under Non-Ideal Motion in ISAC Systems

eess.SP cs.IT ·2026-10-10 ·Keying Zhu, Le Liang, Jie Yang, Fan Liu, Shi Jin
similarity 0.62
Abstract

Unmanned aerial vehicle-enabled synthetic aperture radar (SAR) offers significant potential for providing communication services to ground users while sensing the surrounding environment in low-altitude integrated sensing and communication (ISAC) systems. However, its practical deployment is challenged by known non-ULM trajectories and unknown position errors, which violate conventional SAR assumptions and cause severe image defocusing. We address these non-ideal impacts by formulating the ISAC SAR imaging as an exact linear inverse problem to accurately model arbitrary trajectories with multiple-input multiple-output orthogonal frequency division multiplexing waveforms. Based on this formulation, we develop a diffusion posterior sampling (DPS)-based super-resolution SAR framework, where a pre-trained diffusion model provides a data-driven image prior and the exact physical model enforces measurement consistency during posterior inference. The inference process is further accelerated for practical implementation. For unknown position errors, we develop a joint iterative DPS and motion compensation (MoCo) optimization algorithm with discrete cosine transform reparameterization and coarse-to-fine spectral scheduling. Simulations demonstrate that our framework achieves high-accuracy reconstruction across diverse trajectories and remarkable super-resolution, maintaining greater than 21.3 dB peak signal-to-noise ratio (PSNR) even under half physical resolution truncation. Under unknown motion errors, the joint DPS and MoCo algorithm achieves 23.65 dB PSNR with a residual position-error estimation error of 0.19 cm.

0.25

ProSR: Semantic-Prototype-Guided Discrete Modeling for Physically Consistent SAR Super-Resolution

cs.CV ·2026-09-02 ·Byoungwoo Kim, Munchurl Kim
top venuebenchmark similarity 0.62
Abstract · Accepted to ECCV 2026

High-resolution Synthetic Aperture Radar (SAR) imagery is critical for precision analysis such as automatic target recognition, yet its acquisition is costly. Although generative image super-resolution (ISR) models offer a promising alternative, current smooth-approximation based diffusion frameworks often struggle to preserve the coherent scattering statistics, causing stochastic structural distortions that are less consistent with real SAR physics. To address this, we propose Semantic Prototype-Guided Super-Resolution (ProSR), reformulating SAR ISR as a semantically-guided discrete token prediction task within a quantized latent space. By mapping signal features to discrete scattering primitives, ProSR preserves the impulsive nature of SAR without over-smoothing. Furthermore, we integrate a Self-Supervised Learning backbone into SAR ISR to extract label-free semantic priors, overcoming label scarcity. Guided by these priors, we introduce Semantic-Aligned Detail Encoding to decouple high-frequency signals into discrete scattering primitives. In parallel, the Semantic Prototype Map Generator explicitly constructs semantic prototype maps, allowing Prototype-Map-Guided Attention to route the information flows within identical categories and mitigate inter-class interference. To validate our approach, we present a large-scale 0.25m resolution benchmark from the Umbra Open Dataset. Experimental results show ProSR achieves superior visual quality while preserving essential scattering characteristics required for practical SAR applications.

0.46

3D Radar Imaging from the UAV Nadir

eess.SP ·2026-09-04 ·S. Hamed Javadi, Hichem Sahli, André Bourdoux
top venue similarity 0.61
Abstract · Accepted for publication in IEEE Transactions on Radar Systems

Radars improve the sensing robustness of UAVs by operating under poor lighting and weather conditions and seeing through occlusions such as vegetation. However, they suffer from poor angular resolution, which can be addressed using synthetic aperture radar (SAR) algorithms. State-of-the-art UAV SAR methods operate at a depression angle and are not suitable for sensor fusion applications where the data are collected from areas directly below the UAV (i.e., the UAV nadir). In this paper, we present an interferometric SAR (InSAR) framework for reconstructing 3D images from the UAV nadir using a low-cost multi-input-multi-output (MIMO) mm-wave radar. Additionally, an effective method based on the phase gradient autofocus (PGA) is presented for compensating the phase error across the virtual receive antennas. We demonstrate the effectiveness of our 3D imaging algorithm in both simulation and experimental scenarios.

0.35

Benchmarking Regularization Methods For 3D Radio Tomographic Imaging

eess.IV eess.SP ·2026-09-08 ·Wanqin Ma, Yijun Chen, Alikhan Umirbayev, Jichen Zhang, Ross Murch
similarity 0.60
Abstract · 5 pages, 2 figures, in the process of ICASSP 2027

Integrated Sensing and Communication (ISAC) is an important technology for 6G, enabling wireless systems to perceive their physical environment. Radio Tomographic Imaging (RTI) is a potential technique for device-free sensing in ISAC, reconstructing object locations and shapes from Received Signal Strength (RSS) measurements. It can complement other techniques, such as radar and LiDAR, by providing a narrowband modality with wavelength resolution. Recently, an extended version of RTI, known as the extended phaseless Rytov approximation (x3DPRA), has been developed to enhance RTI reconstruction quality, estimate material parameters, and extend RTI from two to three dimensions (3D). However, the 3D formulation is even more ill-posed than the 2D form, as the number of measurements is far fewer than the number of unknown voxels. In this work, we systematically evaluate and compare three distinct regularization approaches (Ridge, Total Variation, and Tensor Nuclear) within the x3DPRA framework. We provide a detailed performance analysis by evaluating both reconstruction quality and computational runtime across the three methods. Our findings show that Total Variation regularization provides the best reconstruction quality but not the fastest runtime, providing guidance for developing high-resolution 3D RTI systems for future ISAC applications.

0.35

FiLM-GPNet: Geometry-Aware Pseudo-Supervised Phase Restoration with Zero-Shot Generalization for Large Temporal InSAR Stacks

cs.CV cs.LG ·2026-08-29 ·Getnet Demil, Muhammad Farhan Humayun, Tomi Westerlund, Jukka Heikkonen, Mourad Oussalah
published similarity 0.59
Abstract · Its IEEE Geoscience And Remote Sensing Symposium (IGARSS) 2026 Data Fusion Contest Winner Paper. reference https://www.grss-ieee.org/communi…

The growing availability of dense commercial Synthetic Aperture Radar (SAR) time series enables temporal Interferometric SAR (InSAR) analysis, but fixed classical filters fail under heterogeneous acquisition geometries, degrading phase quality and temporal consistency. We propose FiLM-GPNet, a geometry-conditioned network for wrapped-phase restoration that explicitly adapts to acquisition differences using Feature-wise Linear Modulation (FiLM) and a 7D per-pair geometry descriptor. The model is trained with pseudo-supervision from Goldstein-filtered interferograms and regularized by interferometric physics via triplet-closure consistency, while also estimating per-pixel aleatoric uncertainty. Experiments on three Capella Spotlight stacks from the IEEE GRSS 2026 Data Fusion Contest show that FiLM-GPNet reduces temporal residual by 68% (Hawaii) and 66% (Western Australia) relative to the Goldstein baseline, alongside closure error reductions of 10% and 13%, respectively. In Western Australia, it further improves unwrapping success rate by 7.7 percentage points and Digital Elevation Model (DEM) Normalized Median Absolute Deviation (NMAD) by 31%. The model also shows strong zero-shot generalization to a geographically and geometrically distinct third stack (Los Angeles) without retraining, supporting geometry-conditioned restoration as an effective alternative to fixed classical filtering across heterogeneous stacks.

0.29