CS Paper Radar

SkateNav: Learning Energy-Efficient Navigation through Adaptive Skating on Passive-Wheel Quadrupedal Robots

Jeil Jeong, Taeyun Kim, Sangjin Kim, Jinyoung Choi, Sung-Eui Yoon

cs.RO ·submitted 2026-10-19 07:55 UTC · v1
code/data

Abstract

Passive-wheel quadrupedal robots offer energy-efficient locomotion through leg-driven propulsion and momentum-driven gliding. However, navigation requires coordinating steering with intermittent propulsion and adapting push-glide timing to task demands. Velocity-tracking objectives may suppress the speed variations inherent in skating, discouraging efficient gliding. To address these challenges, we propose SkateNav, a unified skating-navigation framework based on reinforcement learning. A time-budgeted goal-reaching objective allows the policy to jointly learn steering, propulsion, and their temporal allocation. An adaptive skating cycle structures gliding, pushing, and recovery, while frequency modulation at every control step adjusts phase durations to navigation demands. Simulation experiments demonstrate higher average success rates and lower cost of transport than the evaluated planner-controller baselines, with ablations confirming the contributions of cycle structure and frequency adaptation. Real-world experiments demonstrate zero-shot transfer from simulation to a passive-wheel Mini Cheetah across cluttered indoor spaces, slopes, and paved outdoor surfaces. Supplementary videos are available on the project page: https://ktw1404.github.io/SkateNav/

Comment
8 pages, 12 figures, 3 tables. Project page: https://ktw1404.github.io/SkateNav/

Closest papers

Nearest neighbours by meaning across the whole index.

Energy-Efficient Gait Adaptation via Hierarchical Reinforcement Learning for Quadrupedal Locomotion Across Diverse Terrains

cs.RO cs.LG ·2026-10-07 ·Ammar Issa, Anubhav Singh, Anton Tsaritsin, Sergey Kolyubin
similarity 0.69
Abstract · 9 pages. Submitted to IEEE ICRA 2027. Ammar Issa, Anubhav Singh, and Anton Tsaritsin contributed equally

While energy efficiency is a critical objective for legged-robot locomotion control, achieving low energy consumption while maintaining robust performance across different velocity ranges and terrain conditions remains a key challenge. This is particularly true for end-to-end RL policies, where gait generation, motion execution, and energy optimization are tightly coupled, leading to high sensitivity to reward design. In this work, we propose a hierarchical reinforcement learning (HRL) framework that separates a high-frequency policy for stable and robust joint-level motion execution from low-frequency gait adaptation that explicitly minimizes the cost of transport (CoT). The three-stage Isaac-based training procedure enables zero-shot sim-to-real transfer with improved tracking accuracy, robustness, and energy efficiency. The learned hierarchy exhibits automatic speed-dependent gait adaptation, transitioning from pacing at low speeds to trotting at higher speeds. We validate the proposed approach in simulation against representative single-policy and hierarchical locomotion baselines, demonstrating reduced CoT over a broad range of commanded velocities, while maintaining robust locomotion across flat, uneven rough, and inclined terrains. We further demonstrate its practical feasibility through zero-shot deployment on a physical Unitree AlienGo quadruped.

0.27

Learning Whole-Body Kinetic Coordination for Wheeled-Quadruped Long-Range Throwing

cs.RO ·2026-08-28 ·Qinglian Wu, Yidian Hu, Weiqi Fan, Yutian Zhang, Siyuan Ma +3 more
similarity 0.66
Abstract · 8 pages, 5 figures

Long-range throwing on unstructured terrain is a key capability for mobile robots in delivery and retrieval tasks, but it requires high release velocity, coordinated whole-body motion, and robustness to terrain-induced disturbances. We present a whole-body kinetic-coordination framework for a wheeled-quadruped manipulator that combines kinetic-chain arm modeling with SQP-based trajectory optimization and a reference-guided reinforcement learning policy for coordinated base motion. The manipulator is first reduced to a kinetic-chain model and optimized under kinematic and dynamic constraints to produce a high-speed throwing reference. On a stationary base, the optimized arm trajectory reaches a release speed of 12.75 m/s and a throwing distance of 16.68 m. When whole-body coordination is enabled, the system further increases the release speed to 16.64 m/s and the throwing distance to 28.25 m. We then integrate the mobility of the wheeled-quadruped platform and validate the complete policy through hardware experiments on flat ground, grass, slopes, and rough roads. The results show that kinetic-chain optimization and whole-body coordination together enable robust long-range throwing across diverse unstructured terrains.

0.20

Dynamics-Informed Reinforcement Learning for Agile and Energy-Efficient Locomotion of a Monopedal Hopping Quadcopter

cs.RO ·2026-09-14 ·Ruigang Chen, Qi Zhang, Zhicheng Zhong, Zhuorui Yun, Yizhar Or +1 more
similarity 0.66
Abstract · 9 pages, 10 figures

Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.

0.21

Learning Air-Ground Motion Control with Temporal Mode Switching and Cross-Terrain Tracking

cs.RO ·2026-09-22 ·Ruitian Pang, Mingrui Li, Xuanting Liu, Tiancheng Lai, Juncheng Chen +8 more
similarity 0.65
Abstract

Passive-wheeled terrestrial-aerial bimodal vehicles (TABVs) combine aerial mobility with energy-efficient ground locomotion. However, reliable air-ground mode switching under limited onboard perception and robust ground trajectory tracking across diverse terrains remain challenging when targeting real-world applications. In this work, we propose a learning-based air-ground motion control framework for passive-wheeled TABVs: 1) a learned mode selector for autonomous air-ground motion mode switching. The selector uses historical single-point time-of-flight (ToF) measurements and robot states together with future reference information to determine the active locomotion mode. 2) a reinforcement learning control policy for trajectory tracking. The policy combines proprioceptive observations with future reference information to anticipate trajectory changes. For ground locomotion, multi-terrain training and dynamics randomization enable robust tracking across different terrains. Simulation and real-world experiments demonstrate reliable air-ground switching under limited perception and accurate ground tracking across diverse terrain conditions. The learned selector outperforms a rule-based mode selector in challenging transitions, while the ground controller achieves lower position RMSE than PID across all tested conditions and maintains decent tracking where NMPC fails. With these capabilities integrated, the system tracks a 101m air-ground trajectory through multiple autonomous mode transitions with a position RMSE of 0.08m.

0.13

Learning Structured Locomotion References for Optimization-Based Whole-Body Control

cs.RO ·2026-10-17 ·Ömer Tarık Banuş, Uluç Saranlı, M. Mert Ankaralı
similarity 0.65
Abstract · 8 pages, 6 figures

Quadruped locomotion requires coordinating body motion,contact forces, foothold placement, and gait timing. We present a hierarchical controller in which reinforcement learning adapts these structured locomotion references while a gait scheduler, reactive footstep planner, and whole-body impulse controller retain responsibility for high-frequency execution. The model-based backbone can sustain a nominal trot independently, allowing the policy to focus on when and how to modify an already functional locomotion controller. We train the complete hierarchy in a vectorized controller-in-the-loop environment using a six-direction disturbance curriculum. Under a common simulator and evaluation protocol, the proposed controller achieves 77.29% mean survival across the tested disturbance grid, compared with 50.35% for the model-based reference controller. Training-time channel ablations identify adaptive foothold placement as the largest marginal contributor to grid survival and reveal direction-dependent effects of gait-rate adaptation. Together, these results demonstrate the viability of the proposed hierarchical controller architecture for integrating learned adaptation with optimization-based whole-body control through structured locomotion references.

0.11

Actuator Dynamics Curricula for Narrow-Viability Tasks in Legged Robot Learning

cs.RO ·2026-09-08 ·Kousheek Chakraborty, Chandan K. Rajendra, Ayham Alharbat, Abeje Y. Mersha
published similarity 0.65
Abstract · Accepted at 2026 Conference on Robot Learning (CoRL)

Reinforcement learning has produced capable controllers across a broad range of legged-robot tasks, but a subset of these tasks fail to converge under standard training: those for which most exploration trajectories terminate before producing useful gradient signal. To address such tasks we introduce the \emph{Actuator Dynamics Curriculum}, a procedure that initializes joint stiffness at a high value and anneals it toward the system-identified value as completed episode lengths grow. Using a cart-pole system as a representative example, we show that higher closed-loop joint natural frequency under critical damping enlarges the viability kernel of the underlying Markov Decision Process, increasing the fraction of initial states from which the task is feasible. We validate the kernel monotonicity on the cart-pole and apply the curriculum to a quadrupedal-to-handstand transition on the Boston Dynamics Spot, a narrow-viability task where training under fixed identified stiffness plateaus at a policy that never completes the transition. The trained policy executes the transition in simulation across 10 seeds and transfers to hardware. More broadly, our results suggest that simulated actuator dynamics is a useful axis along which to design curricula for tasks in which exploration is bottlenecked by termination conditions rather than by reward signal.

0.34

Learning Multi-Phase Robot Loco-Manipulation via Phase-Conditioned Policy Optimization

cs.RO ·2026-10-26 ·Simone Manni, Annika Wollschläger, Dario Bellicoso, Abel Gawel, Marco Hutter +2 more
similarity 0.65
Abstract

Complex whole-body loco-manipulation requires executing diverse maneuvers, such as crouching, grasping, and locomotion, within a single long-horizon task. While performing simple pick-and-place behaviors is well-established, scaling to complex, long-horizon tasks remains difficult. Currently, this challenge is addressed by relying on human motion data and correspondingly humanoid platforms, which limits platform independence and introduces substantial data processing overhead. Instead, we extend proximal policy optimization (PPO) to train a single policy for multi-phase tasks across diverse robotic hardware, leveraging prior task structure to shape behavior. Our method adapts PPO using a phase-conditioned critic, phase-gated reward functions, and a multi-phase reset curriculum to guide exploration. To support varied hardware, we employ a decoupled hierarchical control architecture that separates lower-level balancing dynamics from high-level phase execution. We demonstrate multi-stage loco-manipulation skills on hardware on both the Unitree G1 and a Boston Dynamics Spot equipped with a manipulator arm, and validate our design choices through ablations. Our approach enables the acquisition of complex loco-manipulation behaviors purely through environment interaction while directly incorporating high-level task structure into policy learning.

0.17

Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator

cs.RO ·2026-10-16 ·Yanzhou Jin, Fei Suo, Chang Liu, Yasuhisa Hasegawa, Liming Chen +3 more
top venue similarity 0.64
Abstract

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.

0.23