CS Paper Radar

Which Depth Estimator for Jetson AGX Orin? A 2026 Benchmark of Monocular and Stereo Methods

Leaf Jiang

cs.RO cs.CV ·submitted 2026-10-19 19:34 UTC · v1
benchmarkcode/data

Abstract

The Jetson AGX Orin is a common computer for robots and vehicles, yet measured accuracy, speed and energy of current depth estimators on it are hard to find. We benchmark nine model families as of October 2026: the monocular Depth Anything V2 and 3, Depth Pro, MoGe-2, Metric3D v2 and UniDepth V2, and the stereo methods libSGM, NVIDIA ESS and Fast-FoundationStereo. Every method runs on the Orin as a TensorRT FP16 engine or native CUDA code at up to three input sizes, up to the full 5.7 MP, and is scored for metric accuracy against Middlebury 2014 ground truth (non-occluded pixels of the 10 scenes whose disparity stays below 256 px), GPU time, energy and licence. Stereo is far more accurate. At 30 fps, NVIDIA's ESS reaches 0.70% AbsRel in 8.6 ms and libSGM 0.73% in 25 ms; with more compute, Fast-FoundationStereo reaches 0.33%. The best monocular models reach 12% with the true focal length (Depth Anything 3 Metric-L in 33 ms, Depth Pro in 803 ms), and 3.8-4.0% only with an oracle per-image scale (MoGe-2-L, UniDepth V2-B, Metric3D v2-L). Stereo error falls as the input resolution grows; no monocular model improves, and the metric scale of most drifts away from the truth outside their training resolution. At depth discontinuities, which AbsRel barely registers, the monocular models scatter 17-46% of the edge points between foreground and background, learned stereo 2-9% and libSGM at full resolution 1%. We give recommendations per frame-rate budget and release all code, per-scene results and engine build scripts.

Comment
18 pages, 5 figures, 8 tables. Code and per-scene results: https://github.com/nodarhub/orin-depth-benchmark

Closest papers

Nearest neighbours by meaning across the whole index.

Adapting Monocular Depth Estimation in Novel Scenes through Disparity Refinement and Robot Ego-Motion

cs.RO cs.CV ·2026-11-11 ·Dimitrios Chatziparaschis, Georgios Georgakis, Adnan I. Ansar, Shehryar Khattak, Konstantinos Karydis
similarity 0.65
Abstract · 17 pages, 12 figures, journal

The geometric understanding of a scene is a crucial component for safe and efficient robotic operations in novel and unstructured environments. The recent emergence of foundation models for Monocular Depth Estimation (MDE) has provided an opportunity to enrich robotic perception capabilities with dense long-range depth predictions, replacing expensive onboard hardware (e.g., LiDARs and stereo cameras). However, these offline models are primarily trained on affine-invariant depth representations, and their generalization to novel scenes remains unclear. In this work we present EM-ViT, a monocular depth estimation model that learns to adapt online relative depth inputs from a foundation model prior to the metric scale with observations collected during robotic operations. Motivated by the stereo camera parameterization, our method decomposes depth prediction via dense disparity refinement to recover the scene's relative structure and an effective baseline scalar prediction to determine the missing metric scale. The learning process leverages sparse LiDAR points and, optionally, the robot's Ego-Motion (EM) to rapidly train a lightweight Vision Transformer (ViT), while an internal gradient matching loss preserves the fine-grained semantic structure of the input disparity in real-time. We demonstrate the efficacy of our method on publicly available sequences, such as KITTI, and show that our online learning pipeline can adapt to novel scenes faster and with higher accuracy than existing MDE foundation models. The code and supplementary materials will be publicly available at https://emvit-mde.github.io.

0.29

Depth Anyviewpoint? Evaluating Monocular Depth Over Viewpoint Sequences

cs.CV ·2026-11-01 ·Theo Rode, Rui Zhang, Ryan Aubrey, Olivia Li, Jessica Huang +3 more
similarity 0.64
Abstract

Monocular depth estimation aims to predict depth maps from single RGB images (forgoing the need for stereo camera pairs) and has seen impressive leaps in performance in recent work due to the introduction of affine-invariant losses and the use of foundation model features. These monocular depth models predict affine-invariant depth, which describes the relative positions of objects in the scene instead of absolute depth. While these models demonstrate strong performance on single image benchmarks and qualitatively consistent predictions in video, their effectiveness at preserving consistent spatial structure has been less thoroughly explored. Many potential real-world applications, such as handling video streams as input, rely on coherent three dimensional consistency in scenes. Further, anchoring relative depth predictions to a metric reference for a given scene is a key challenge for applying monocular depth models to real-world situations. We develop a novel evaluation protocol for monocular depth models using video sequences with moving camera positions to test the consistency of prediction across variation in viewpoint. We demonstrate this methodology over diverse, real-world video sequences where we are able to anchor depth model output to metric depth values using structure from motion. Our work demonstrates open challenges in the development of broadly applicable monocular depth foundation models, particularly with their ability to provide temporal consistency over long time frames. We also identify challenges in the straightforward adoption of structure-from-motion as a metric grounding tool for monocular depth estimation models.

0.14

Jetson-ORB-SLAM3: Accuracy-Preserving GPU Implementation for Edge Computing Devices

cs.RO ·2026-08-18 ·Rajat Roy, Aditya Arun Kumar Yadav, Hardik Jain
similarity 0.63
Abstract

Visual-inertial SLAM on low-power edge platforms is constrained by the cost of dense feature extraction and loop closure. Prior GPU ports of ORB-SLAM trade accuracy for speed by approximating the ORB detector, altering the feature set and therefore the estimated trajectory. We present an accuracy-preserving GPU implementation of ORB-SLAM3 for the NVIDIA Jetson Orin Nano, whose GPU ORB front end reproduces the reference CPU detector algorithmically to 94.7% exact keypoint agreement and 99.9% descriptor bit agreement. This work also makes CNN-based loop closure edge-viable through native TensorRT. The visual front end (feature extraction) is offloaded to the GPU while the mapping and optimization back end is kept on the CPU, matching each computation to the hardware it suits. The accuracy is verified by comparing four configurations: the GPU pipeline and the unmodified CPU reference, each run on both the Jetson Orin Nano and a desktop. On EuRoC dataset, all four agree to within 0.10cm in mean absolute trajectory error (SE(3)), so neither the GPU port nor the change of hardware shifts the estimated trajectory. The GPU-versus-CPU comparison is reproducible on TUM-VI and KITTI datasets, so the acceleration is accuracy-preserving rather than approximate. The proposed implementation is competitive with published ORB-SLAM3 on EuRoC, attains sub-centimeter accuracy on five of the six TUM-VI room sequences, and reaches sub-1% relative translation error on nine of eleven KITTI sequences. For loop closure, the generic ONNX-Runtime CUDA/TensorRT execution providers are unusable with our CosPlace ResNet-50 on the embedded platform, whereas a native libnvinfer FP16 engine reduces per-query inference to 2.2ms, a 180x speedup. Learned place recognition therefore runs concurrently with tracking on a 7W device. In monocular-inertial mode the system sustains 32FPS mean over the eleven EuRoC sequences.

0.23

Monocular Depth Estimation from a Single Image: Progress and Opportunities

cs.CV ·2026-09-01 ·Muxin Liu, Xiaoyang Lyu, Yang-Tian Sun, Yi-Hua Huang, Ziyi Yang +2 more
publishedsurvey similarity 0.63
Abstract · Accepted by Computational Visual Media Journal (CVMJ)

Monocular depth estimation has long stood as a fundamental challenge in computer vision, enabling a wide range of applications including 3D reconstruction, robotics, autonomous driving, and augmented reality. This survey traces the field's evolution from early learning-based methods to the emergence of transformative foundation models. We begin by framing the problem, distinguishing between relative and metric depth estimation, and highlighting the key challenges that have shaped a decade of research. We then present common problem formulations and introduce the most widely used datasets, covering indoor, outdoor, and synthetic data. Following this, we review major advances prior to the foundation model era, distilling core insights from influential methods that contributed to improvements in accuracy, efficiency, and robustness. The survey then turns to the recent surge of foundation-model-based approaches, categorizing them into discriminative and generative paradigms and emphasizing the critical roles of large-scale pretraining (e.g., DINOv3) and synthetic data. We compare representative models using both quantitative benchmarks and qualitative examples, and discuss natural extensions to video-based depth estimation. Further, to illustrate real-world impact, we highlight the integration of depth estimation into applications such as visual SLAM, content generation, and robot perception. Finally, we outline open challenges and promising research directions as the field advances further into the era of foundation models.

0.51

E3tereo: Improving Stereo Matching at Depth Boundaries with Learned Geometric Edges

cs.CV cs.AI ·2026-10-24 ·Qi Xiong, Qinghua Zhao, Yongqiang Xi
code/data similarity 0.62
Abstract · submitted to cvpr

Depth boundaries remain a major source of error in stereo matching. For IGEV on Scene Flow, geometric edge pixels account for only 6% of evaluated pixels but about half of the total absolute disparity error. Photometric edges can respond to texture changes without corresponding depth discontinuities, making them unreliable cues for boundary refinement. We propose E3Stereo, which learns geometric edges from disparity supervision and combines these boundary cues with the backbone disparity and image details to predict full-resolution disparity corrections. The same edge map also emphasizes boundary errors during training, while joint optimization allows the edge predictor to adapt to disparity refinement. On the Scene Flow dataset, E3Stereo reduces end-point error (EPE) at depth boundaries by 9.5%-14.3% across RAFT-Stereo, IGEV, and MonSter, while also reducing overall EPE. After fine-tuning, our IGEV-based model improves upon IGEV on all eleven reported metrics across ETH3D, KITTI 2012, and KITTI 2015. The source code will be made publicly available upon acceptance.

0.25

Foundation Model Driven Optical Flow

cs.CV cs.RO ·2026-10-19 ·Praroop Chanda, Suryansh Kumar
publishedcode/data similarity 0.62
Abstract · 19-pages, 5 figures, 16 tables. Accepted for publication at 40th Conference on Neural Information Processing Systems (NeurIPS 2026). Worksho…

We investigate how frozen pretrained visual and depth representations support dense optical flow when coupled with a supervised matching network. Building on TTSFlow, this paper studies Dense Prediction Transformer (DPT) feature decoding and one coarse-to-fine refinement stage. Our method fuses features from frozen DINOv2 and Depth Anything V2 models and estimates optical flow through a trainable transformer-based matching pipeline. After optical-flow training on FlyingChairs and FlyingThings3D, it achieves 2.37 endpoint error (EPE) on the Sintel training split, Final pass, compared with 2.52 for the FlowSeek (T) configuration reported here. Our RoCo-Spring 2026 entry, RoCo-29.VSAI, obtains a robustness-balanced score of 1.1038, Spring EPE of 1.411, and RobustSpring proxy EPE of 4.739, with a lower balanced score than seven of the twelve listed reference baselines. These results characterize the complete pipeline, which reuses frozen foundation backbones and performs one refinement stage. Code is available at: \url{https://github.com/Visual-and-Spatial-AI-Lab/FFlow}

0.36

What the Averages Hide: Monocular Metric Depth Models Still Fail in Everyday Scenes, Mostly on Scale

cs.CV ·2026-11-16 ·Hualie Jiang, Yujie Luo, Ziyang Song, Ximeng Li, Zhiqiang Lou +1 more
similarity 0.62
Abstract · https://antigravity-tech.github.io/DIMED/

Zero-shot monocular metric depth models are evaluated by averaging metric and scale-aligned scores across datasets. Averages cannot show how many images still have severely wrong metric depth, whether depth is under- or overestimated, or whether different models fail on the same images. We propose an evaluation built on per-image results: the failure rate (metric $δ_1$ < 0.5); scale-aligned metrics for structure, and the bias, dispersion and absolute error of the alignment scale for scale; and a cross-model comparison that separates shared from model-specific failures. We apply it to 11 recent architectures with and without ground-truth intrinsics (18 model evaluations) on the 7 everyday-scene benchmarks (4,406 images) used by MoGe-2. Metric depth estimation is not solved in everyday scenes, and the remaining difficulty is mainly scale: the best of the 18 evaluations still has a failure rate of 7.7% (datasets weighted equally); pooled over all failures, 78.8% have intact structure, and after scale correction 98.3% no longer fail. Images failed by at least 6 architectures make up 7.3% of the data, concentrated on HAMMER and DIODE; even when selected only by architectures of other families, they hold 34% to 40% of the error of the top 6 models, against 14% to 18% for as many random images from the same datasets. Adding objects reduces the scale error of most models; ground-truth intrinsics and, in most families, larger models reduce the failures but do not remove them. We recommend reporting failure rates, structure and scale separately, and results stratified by how many models fail. We will release the code, the per-image results with shared-failure labels, and two diagnostic sets built from TUM RGB-D.

0.32

HERON: Real-Time Obstacle-Aware Reachability Maps for Mobile Manipulators

cs.RO ·2026-10-28 ·G. Dupoiron, F. Michaud, J. P. Roberge
similarity 0.61
Abstract · 19 pages, 5 figures, preprint

Mobile manipulator robots rarely reposition their base during manipulation, because doing so requires real-time knowledge of how well the arm can reach its surroundings among obstacles. Reachability maps (RMs) encode this knowledge, but existing methods are slow, coarse (typically 5 cm), or ignore real obstacles. This article asks whether a neural network can predict an obstacle-aware RM at 2 cm resolution from a live depth camera, on embedded hardware, fast enough for online use. We present HERON, a 3D U-Net trained on RMs computed with the GPU-accelerated inverse kinematics of cuRobo, first on synthetic scenes and then on real depth data, and deployed on a Jetson AGX Orin with TensorRT and INT8 quantization. HERON predicts the RM of a 2.56 m cube around the arm in 115 ms on average, for a measured system rate of 8.57 Hz, close to the 10 Hz update rate of the obstacle map, whereas computing the same map with cuRobo takes about 90 min. Against the cuRobo ground truth, 95% of the voxels lie within 1 class out of 51 with the FP32 model and within 3 classes with the INT8 model, with a Pearson correlation of 0.99 and a quadratic weighted kappa above 0.9. Accuracy degrades mainly at the workspace boundaries.

0.35