CS Paper Radar

HERON: Real-Time Obstacle-Aware Reachability Maps for Mobile Manipulators

G. Dupoiron, F. Michaud, J. P. Roberge

cs.RO ·submitted 2026-10-28 03:34 UTC · v1

Abstract

Mobile manipulator robots rarely reposition their base during manipulation, because doing so requires real-time knowledge of how well the arm can reach its surroundings among obstacles. Reachability maps (RMs) encode this knowledge, but existing methods are slow, coarse (typically 5 cm), or ignore real obstacles. This article asks whether a neural network can predict an obstacle-aware RM at 2 cm resolution from a live depth camera, on embedded hardware, fast enough for online use. We present HERON, a 3D U-Net trained on RMs computed with the GPU-accelerated inverse kinematics of cuRobo, first on synthetic scenes and then on real depth data, and deployed on a Jetson AGX Orin with TensorRT and INT8 quantization. HERON predicts the RM of a 2.56 m cube around the arm in 115 ms on average, for a measured system rate of 8.57 Hz, close to the 10 Hz update rate of the obstacle map, whereas computing the same map with cuRobo takes about 90 min. Against the cuRobo ground truth, 95% of the voxels lie within 1 class out of 51 with the FP32 model and within 3 classes with the INT8 model, with a Pearson correlation of 0.99 and a quadratic weighted kappa above 0.9. Accuracy degrades mainly at the workspace boundaries.

Comment
19 pages, 5 figures, preprint

Closest papers

Nearest neighbours by meaning across the whole index.

ERA: Error-Resistant Autonomous Object Navigation with Predicted Depth

cs.RO ·2026-11-13 ·Shunyang Huang, Shuo Wang, Wenyuan Xie, Mingyu Lin, Yue Ding +1 more
similarity 0.67
Abstract

Depth and 3D foundation models can predict geometry from RGB images, allowing zero-shot object navigation without a depth sensor. However, when predicted depth is mapped as if it came from a sensor, view-dependent errors accumulate in the map, remove exploration goals, and end the search before the agent can observe and correct them. We propose ERA, a training-free object navigation system that replaces the depth sensor with depth predicted from RGB images and poses. ERA follows a paradigm we call Move with Error: movement provides new views that correct map errors, and the corrected map enables further movement. It realizes this paradigm with revisable occupancy and with exploration from reachable viewpoints, which continues the search when no frontier remains, and verifies the target across views before stopping. On three benchmarks, ERA achieves state-of-the-art performance among training-free methods without depth sensors. Its map and exploration components also raise VLFM's success from 10.8% to 61.7% under the same predicted depth. We further deploy ERA on a real robot.

0.23

cuRoboV2-Fast: Fast Torque-Limited Collision-Free Motion Planning

cs.RO ·2026-11-04 ·Balakumar Sundaralingam, Adithyavairavan Murali, Stan Birchfield
code/data similarity 0.66
Abstract

We present cuRoboV2-Fast, a GPU-accelerated planner that reduces both planning latency and execution time for collision-free, payload-aware, torque-limited motions. B-spline trajectory optimization reduces the required iterations, while accelerated robot computations and differentiable inverse dynamics reduce refinement cost and accommodate changing payloads. TimeOpt optimizes traversal speed along the fixed path under sampled velocity, acceleration, jerk, and torque constraints, exploiting local spline support to solve banded Newton systems efficiently on the GPU. With a 3,kg payload, cuRoboV2-Fast achieves 4.4 ms mean planning time on RTX 5090, 14.7x faster than cuRoboV2. Our method on Jetson AGX Orin plans faster than cuRoboV1 + TOPPRA on RTX 5090. A stereo-camera-based deployment on YAM achieves 5.93 s mean completed pick-and-drop cycles, 34.6% shorter than cuRoboV2. Code (Apache 2.0): https://github.com/NVlabs/curobo , Project Page: https://research.nvidia.com/labs/lpr/curobov2-fast .

0.26

SE(3) Neural Potential Fields for 6-DoF Trajectory Planning Directly from Images Without Explicit 3D Reconstruction

cs.RO cs.AI ·2026-09-21 ·Jeffrey Eiyike, Masoud Ataei, Elvis Gyaase, Vikas Dhiman
similarity 0.64
Abstract

Reaching a 6-DoF grasp pose in clutter requires a collision-free trajectory, conventionally obtained by reconstructing the scene in 3D and planning inside that reconstruction, at the cost of its accuracy and compute. Potential fields learned directly from images remove that dependency but inherit the classical weakness of artificial potential fields: where attractive and repulsive gradients cancel, the descent grazes the obstacle instead of going around it, and can stall short of the goal. We present an SE(3) neural potential field learned from posed RGB images and supervised with a navigation function, the geodesic distance to the grasp through free space recovered from those same images during training, which removes both failures. On two tabletop scenes, from obstacle-blocked starts executed on a UR10, the field converges within 3 cm of the grasp from every start and every path it executes is collision-free against the ground-truth geometry, against 25% and 0% under image supervision alone; mean clearance rises from under a centimeter to 8.6-8.8 cm and arm-link contacts fall from 20.6-50.4% to 2.7-5.5% of executed configurations. Executed grasp success is 90.0% and 40.0% on the two scenes, the residual failures being refusals of the Cartesian executor rather than of the field. Planning takes about 2 s against 67-133 s for RRT* on a reconstruction of the same images, though under a common offline harness the two are comparable: the deployed margin is the cost of collision-checking a dense reconstruction, not planner complexity.

0.24

Physical AI for Intralogistics: Benchmarking the NVIDIA Sim-to-Real Ecosystem for Cosmos-Enhanced COMPASS Navigation on Industrial Mobile Robots

cs.RO ·2026-10-20 ·Charbel Abi Hana, Rayan Zaitouni, Kameel Amareen, Mohamad Mostafa, Hasan Sayour +4 more
benchmark similarity 0.63
Abstract

Classical robot navigation stacks are reliable but often require re-engineering for each new robot type and site. Learning-based navigation shifts this effort from hand-tuned parameters to data generation and training, where a policy adapts to each new embodiment or facility by fine-tuning in simulation. Whether policies adapted this way stay reliable on real industrial robots has seen little systematic testing. We study this for NVIDIA's X-Mobility and COMPASS workflow for training learned navigation policies on Idealworks robots. In simulation, we extend the COMPASS benchmark with two embodiments, the differential-drive iw$\mkern-1.5mu.\mkern-1.5mu$hub and an omnidirectional Humanoid Mobile Platform (HMP), and with a digital twin of the Idealworks R&D center. For the real world, we fine-tune X-Mobility on data from this digital twin, with and without sim-to-real variants generated by NVIDIA Cosmos, train COMPASS on top of it from scratch in the digital twin, deploy the resulting policies on the iw$\mkern-1.5mu.\mkern-1.5mu$hub's onboard Jetson AGX Xavier, and benchmark them in the Idealworks R&D center against COMPASS trained only on NVIDIA's environments and the existing Idealworks navigation stack on task success, efficiency, safety, smoothness and onboard compute. Running every static scenario both in a digital-twin replica and in the real facility measures the sim-to-real gap and how far Cosmos-augmented data closes it. Training in the digital twin with Cosmos sim-to-real augmentation raises the real-world success rate of learned navigation from 65.3% to 91.7% across four scenarios and nearly halves its weighted travel time compared with simulation-only training, bringing it within 8.3 points of the production navigation stack, fully onboard; with an integrated global planner, it also reaches far, occluded goals in every trial.

0.13

SAM-VTP: Video Memory and Measured Geometry for Continuous Traversability Segmentation

cs.RO ·2026-11-09 ·Lucas Hoefs, Hui Xie, Senjian An, Fangyi Zhang
similarity 0.63
Abstract · 8 pages, 5 figures, 3 tables

Traversability prediction is a core component of autonomous navigation, yet most vision-based methods operate frame-wise and produce temporally inconsistent predictions. We present SAM-VTP (Video Traversability Prediction), which fine-tunes SAM2's video memory pathway for dense, prompt-free traversability segmentation, conditioning each frame on a persistent memory of prior observations. Rather than inferring terrain geometry from appearance, we measure it: slope, roughness and height are computed from depth and fused into the image features. We also introduce an offline continuous supervision pipeline that generates dense per-pixel traversability targets in [0,1] from depth-derived geometry and semantic priors, requiring no robot deployment and no per-pixel annotation, capturing conditional feasibility that binary labels cannot represent. On TartanGround, a large-scale synthetic ground-robot dataset, SAM-VTP improves fuzzy Jaccard from 0.908 to 0.924 and binary IoU from 0.854 to 0.886 over SAM-TP, a frame-wise SAM2 baseline, against a seed-to-seed spread below 0.001, and cuts frame-to-frame flicker by 31%. In closed-loop trials at two field sites, driving the same planner and controller, the baseline's dropouts leave the planner without a feasible path 3.3x more often on a paved course and 6.9x on rough ground, while SAM-VTP runs at 21.4 FPS on the Orin Nano the robot carries.

0.26

TravSUITE: Traversability via Self-Supervised, Uncertainty-Aware IRL and Terrain Estimation

cs.RO ·2026-10-23 ·Samuel Triest, Amirreza Shaban, David D. Fan, Wenshan Wang, Sebastian Scherer
publishedhighly cited similarity 0.63
Abstract

Traversability analysis in off-road settings remains a fundamental challenge for mobile robots. Key difficulties include constructing an accurate and expressive local map from multimodal sensor data, and using the map to design traversability rules that yield desirable navigation behavior. Importantly, this system must be resilient to the limited sensing regime brought about by complex environments and high speeds. In this paper, we present TravSUITE, a traversability system suitable for high-speed navigation in off-road environments. TravSUITE consists of two major components: 1) an efficient voxel mapper that leverages visual foundation models (VFMs) to build a rich geometric-semantic local map from streams of on-board sensor data, and 2) a unified neural network that jointly predicts traversability-relevant quantities in bird's eye view (BEV), including geometry, semantics, speed and cost. Our training strategy is entirely annotation-free and self-supervised, leveraging tasks such as map inpainting and inverse reinforcement learning (IRL) to learn both map representations and traversability. We perform a thorough ablation study and comparison to state-of-the-art approaches, and the results indicate that cost learning and auxiliary inpainting each contribute significantly to planning quality, and their combination is critical for achieving state-of-the-art performance in off-road path planning. We also design a simple risk adaptation mechanism to leverage our method's uncertainty estimates at deploy-time, and demonstrate that a combination of inpainting and risk estimation can result in 80% fewer navigation errors and 5% faster autonomous traversal speeds in real-world hardware experiments.

0.49

Learning Event-based Obstacle Avoidance via Differentiable Simulation

cs.RO ·2026-10-28 ·Chenlu Shou, Yunfan Ren, Jiaxu Xing, Davide Scaramuzza
similarity 0.63
Abstract

Reliable obstacle avoidance is essential for safe quadrotor flight in unknown environments, yet conventional frame-based cameras remain challenged by motion blur, limited dynamic range, and latency under fast motion. Event cameras, with sub-millisecond latency, high dynamic range, and negligible motion blur, offer a promising alternative, but leveraging them for closed-loop control remains difficult. Existing approaches either adopt cascaded architectures that first estimate depth and then map it to control commands, introducing error propagation, or achieve end-to-end control through costly offline pretraining before online fine-tuning can even begin. We address these challenges with a CUDA-based event simulator that exploits GPU parallelism to render events efficiently within the training loop, integrated into a differentiable simulation pipeline that enables direct gradient backpropagation through the differentiable physics model, improving sample efficiency. This allows us to train an end-to-end policy that maps event frames directly to control commands, without intermediate depth estimation. We validate our approach through zero-shot real-world deployment on a quadrotor, achieving robust obstacle avoidance in both odometry-assisted and odometry-free settings, including under low-light conditions where conventional cameras typically fail.

0.10

An Integrated Open-Source Stack for Vision-Based Autonomous Navigation of Wheeled Rovers

cs.RO ·2026-11-05 ·Iaroslav Kolomiets, Iaroslav Sheipak, Mikhail Reppo, Vsevolod Egorov, Viktor Chertopolokhov +1 more
publishedcode/data similarity 0.63
Abstract · Accepted at RiTA 2026

Vision-based rover autonomy requires integrating perception, localization, planning and platform-specific control under limited sensing and computing resources. We present an open-source ROS 2 stack for following directional arrows, reaching a terminal cone and returning autonomously to the start. It connects YOLOv8n detection and geometric direction, range and bearing estimation with RGB-D SLAM, wheel-inertial state estimation, kinematics-aware planning, behavior-tree mission management and STM32 actuation. Standard interfaces separate reusable autonomy from the hardware layer; a proportional path-following plugin supports low-speed rover motion. Public resources include software, configuration, a labeled dataset, trained weights and evaluation logs. On 478 held-out images, the detector achieves mAP@0.5 of 0.720 under the Ultralytics evaluator and outperforms a classical OpenCV baseline under a shared evaluation protocol. The reported perception latency is 25 ms on a Jetson Orin NX. Three missions, one indoor and two outdoor, demonstrate marker-guided navigation and autonomous return without operator motion commands or reported collisions. Field results document integration failures and corrective choices; repeated instrumented trials remain necessary to quantify physical navigation errors and reliability.

0.28