CS Paper Radar

Toward Agentic AI for the 6G Physical Layer: From Algorithm Discovery to Verified Baseband Silicon

Eric Mittag, Lukas Brechtel, Maximilian Stark, Hans D. Schotten

cs.AI cs.NIeess.SP ·submitted 2026-10-20 07:56 UTC · v1

Abstract

6G will be designed faster than it can be built: AI-driven search already proposes physical-layer algorithms at machine speed, while carrying a single one onto embedded baseband silicon remains specialist work. That silicon imposes hard memory and numeric limits, but also exposes cost structures a GPU lacks, and a design flow that never runs on the target sees neither. We present an agentic workflow in which an LLM coding agent implements algorithms on a commercial baseband SoC, optimizes them down to agent-written vector assembly, and validates them on silicon. The agent is guided by a knowledge base of measured platform facts, checked at every step against evaluators it is instructed never to edit, and metered per phase. We showcase the workflow on an AI-discovered orthogonal time frequency space (OTFS) detector portfolio on the open 6G4All platform. It yields twelve kernels that run cycle-exactly on silicon, their optimized versions at 18k-405k cycles (30-660 $μ$s) per frame. It also yields a new detector shaped by the chip's measured costs that needs 13.9% fewer cycles than the port of the discovered detector while matching its error rate, with a measured edge our evaluation cannot statistically resolve, a structure that a hardware-blind search objective had no reason to find. What is not specific to OTFS is the workflow: an LLM agent exploring an implementation space under real hardware limits, with the cost of every choice measured rather than assumed.

Comment
7 pages, 3 figures, 5 tables. Accepted at the 2026 IEEE Globecom Workshops (GC Wkshps), 2nd Workshop on Agentic AI Empowered Wireless Communications and Networking, Macau, China, December 2026. (c) 2026 IEEE

Closest papers

Nearest neighbours by meaning across the whole index.

A Case Study of a Multi-Agent Kernel-Optimization Loop That Learns a New AI Accelerator

cs.LG cs.AIcs.ARcs.PL ·2026-10-28 ·Byonggon Chun
publishedbenchmarkcode/data similarity 0.67
Abstract · 7 pages, 3 figures, 2 tables. Round 1 of the NPU Model Optimization Competition at MICRO 2026. Code: https://github.com/bgchun-fs/multi-agen…

Frontier large language models write correct CUDA kernels for most single-operator benchmark tasks, yet their accuracy collapses on accelerators whose architecture and programming language they have rarely seen. We present a case study of an LLM agent loop built for such accelerators. Our example is the FuriosaAI RNGD NPU, programmed in a recent, sparsely documented Rust DSL, where the loop optimized three Gemma-4-12B decode kernels over 12 days on a shared, scarce device. The loop builds its own target knowledge: it writes and checks a summary of the DSL documentation, measures the chip with microbenchmarks, records compiler-derived legality rules, and revisits this knowledge when the toolchain changes, rechecking rules and measurements where it can. A role-based search over per-kernel Design Trees explores whole-kernel designs and accumulates small accepted changes in the best version of each kernel. Because device time is scarce and readings are noisy, cheap checks screen new designs before any device run, and late in the run a change was accepted only after repeated comparisons with the best kernel on the device. The final kernels reach a 9.293x geomean speedup over the official baseline, each within 1.25x of the cycles needed just to move its weights. Our prompts, profiler and acceptance test are available at https://github.com/bgchun-fs/multi-agent-kernel-gen-loop.

0.40

MaxKernel: Agentic Kernel Generation for TPUs

cs.AI cs.PFcs.PL ·2026-09-03 ·Shangkun Wang, Nina Cai, Charles Hoong, Julian Walker, Gerson Kroiz +5 more
benchmarkcode/data similarity 0.66
Abstract · 14 pages, 6 figures, 4 tables

Designing and authoring high-performance custom kernels for accelerators is a complex task that requires deep hardware-level expertise. Large Language Models (LLM) can be leveraged together with real-time compiler feedback to build agentic systems for kernel generation. In this work, we present MaxKernel, a multi-agent system that implements three distinct paradigms for TPU kernel development: (1) a Human-in-the-Loop (HITL) agent for collaborative, step-by-step design; (2) an Autonomous (Auto) agent that executes a fully automated, metric/trace-driven optimization loop; and (3) a Graph-Based Autonomous Search that scales the Auto agent for global exploration of the design space. All three paradigms leverage a shared pool of specialized sub-agents to handle planning, implementation, self-debugging, testing, and hardware profiling. We evaluate MaxKernel on JaxBench, a comprehensive suite of 50 diverse kernel tasks for TPUs, alongside complex, real-world workloads from state-of-the-art open-source models. We demonstrate that MaxKernel consistently generates highly optimized implementations, matching expert hand-tuned baselines and delivering significant performance across the benchmark. Our agent is open-sourced and available https://github.com/AI-Hypercomputer/accelerator-agents/tree/main/MaxKernel.

0.51

Evaluating AI Agents for Industrial-Level Chip Floorplanning: A Framework and Empirical Study

cs.AI ·2026-11-09 ·Nova-Silicon Team
similarity 0.65
Abstract

Floorplanning is an early step in turning a logical circuit into a physical chip: it positions large circuit modules and constrains the space available for subsequent logic placement and wiring. These decisions affect congestion and timing, but their physical consequences emerge through downstream implementation. For AI agents, the task requires translating engineering constraints into spatial decisions whose quality cannot be judged by successful tool execution alone. We present an evaluation framework that connects submitted layouts to a prescribed downstream implementation flow, checks geometric validity, measures physical quality, and reports resource use. On one industrial design whose 99 macros occupy approximately 71\% of a fixed L-shaped layout region, we compare our specialized system Nova-SI with general-purpose engineering agents and agents restricted to file access, obtaining complete physical measurements for 39 layout outputs. Under our 0--100 composite quality score, Nova-SI achieves a mean of 57.97 without online feedback from the prescribed power-grid and placement evaluation, compared with 31.17 for the strongest measured general-purpose configuration, GPT-6 Astra. The difference is supported by raw congestion and timing measurements and persists across scoring-sensitivity checks. Layout-level analysis further shows that similar global utilization can conceal substantially different local congestion. Together, the protocol and case study assess agents through the physical consequences of their delivered layouts and provide evidence about system performance on this industrial instance.

0.28

LLM Agent-Based Design of RISC-V CPUs with FPGA-in-the-Loop Evaluation

cs.AR cs.AI ·2026-10-29 ·Leo Itoh, Junichiro Kadomoto
code/data similarity 0.65
Abstract · 5 pages, 6 figures, 2 tables. Submitted to IEEE ISCAS 2027. Code and data: https://github.com/kadomoto-lab/llm-cpu-fpga-loop

Long-run RTL simulation of CPU candidates can take hours, while short diagnostic runs may miss performance degradation that emerges later in execution. This evaluation cost can delay design decisions in LLM-agent-based CPU development. We present a development environment in which LLM agents implement CPU candidates on an FPGA and use on-board performance measurements to guide design decisions. We applied it to the human-supervised development of a single-cycle RV32I core into a three-wide out-of-order RV32IM core. The final design reaches 5.61 CoreMark/MHz at 130 MHz on a Artix-7 FPGA. For the same CPU candidate running 8,000 CoreMark iterations, FPGA evaluation, including implementation, was 9.6x faster than single-threaded RTL simulation. In one case, board measurements revealed long-run performance degradation in a candidate that improved in a short diagnostic run. The result guided candidate selection and led to RTL-based root-cause analysis and a fix.

0.37

EngineAgent: Agentizing On-Device LLM Inference Engines with Inference Stack Hierarchy Awareness and Hardware Abilities

cs.OS cs.AIcs.CLcs.SE ·2026-11-10 ·Zhengxiang Huang, Yujie Sun, Shengheng Chen, Zhaode Wang, Chaoyue Niu +4 more
similarity 0.64
Abstract

Rapidly evolving LLM architectures and heterogeneous mobile hardware make supporting new models in on-device inference engines a recurring and costly system challenge. Each model may require coordinated changes across conversion, graph construction, operators, and hardware backends. Existing coding agents often miss these cross-layer dependencies and struggle to diagnose failures across host--device execution paths. We present EngineAgent, an agentic system for automating on-device LLM model enablement. Its key insight is to separate reusable engine and hardware knowledge from model-specific implementation. Before enablement, EngineAgent constructs a hierarchy-aware engine index that captures engine abstraction layers and cross-layer dependencies, and pre-validates backend-specific build, execution, and debugging workflows using already supported models. For each new model, a builder uses this knowledge to coordinate cross-layer changes, while an auditor checks implementation completeness and drives iterative debugging through device-side validation. Across 12 tasks spanning three mobile LLMs and four engine--backend pairs on CPUs, GPUs, and NPUs, EngineAgent achieves 75% end-to-end success with either of two underlying LLMs, versus 33.3% for the strongest coding-agent baseline. Success requires compilation, on-device execution, and output-logit agreement with reference implementations. EngineAgent also reduces average per-task time and model-API cost relative to baselines using the same underlying LLMs.

0.21

Beacon: LLM Multi-Agent Driven Hardware Design Space Exploration for Heterogeneous Multi-Chiplet Deep Learning Accelerators

cs.AR ·2026-08-31 ·Boyu Li, Zongwei Zhu, Qianyue Cao, Xi Li, Xuehai Zhou
similarity 0.63
Abstract

Heterogeneous multi-chiplet accelerators allow chiplets to be configured independently to better match different operator characteristics and improve inference efficiency. However, heterogeneity makes simulator evaluation expensive, limiting the number of iterations affordable for hardware design space exploration (HW-DSE). Mainstream data-driven methods rely mainly on final metrics and a few predefined states, and require many search iterations to implicitly learn the relationships between input parameters and optimization objectives, making them less effective in this setting. In practice, evaluators also generate detailed reports on execution timelines, resource utilization, memory accesses, and communication behavior. Large language models (LLMs) can combine domain knowledge with these reports to explicitly identify bottleneck locations, degradation causes, and parameter adjustment directions, thereby improving each design decision under limited iteration budgets. Based on this observation, we propose Beacon, a report-driven LLM multi-agent framework for heterogeneous multi-chiplet HW-DSE. Beacon employs hierarchical agents for bottleneck localization, root-cause diagnosis, and hardware candidate generation, together with an Analysis Toolbox and RAG memory for closed-loop search. Under the same limited iteration budget, Beacon reduces the composite latency-energy-monetary-cost objective by 25.1\%--93.5\% compared with random search, Bayesian optimization, and reinforcement learning.

0.16

Agentic Design Space Exploration for Joint Hardware Configuration Selection and Mapping of AI Inference Workloads on Heterogeneous Edge SoCs

cs.AR cs.AI ·2026-10-05 ·Geetha Prasuna Yarramneni, Surya Selvam, Wilfried Haensch, Anand Raghunathan
top venue similarity 0.63
Abstract · Published at the 2026 ACM/IEEE International Symposium on Machine Learning for CAD (MLCAD '26), Jeju Island, Republic of Korea, September 7-…

Modern edge Systems-on-Chip (SoCs) integrate heterogeneous processing units (PUs) such as CPUs, GPUs, and NPUs, each with distinct performance and energy characteristics. Deploying AI inference workloads on them under real-time latency and energy constraints requires jointly mapping workloads to PUs and configuring each PU (e.g., selecting the number of active cores and the operating frequency). This joint space grows combinatorially, making exhaustive search infeasible. Most prior work on design space exploration (DSE) applies black-box optimization (BBO) such as evolutionary search, where each evaluation returns only aggregate metrics such as latency and energy. Recent LLM-guided DSE relies on the same sparse feedback. We observe that this limits its efficiency: it offers no insight into the design space or the reasons a design choice performs the way it does, and it leaves the reasoning abilities of LLMs largely unused. We present TraceDSE, an agentic DSE flow that performs joint workload mapping and PU configuration selection for AI inference on heterogeneous SoCs. TraceDSE is an iterative proposer-critic loop driven by richer feedback in the form of system execution traces. The LLM proposer agent generates candidate mappings and PU configurations for hardware evaluation. The LLM critic agent, equipped with programmatic trace-analysis tools, analyzes the traces to identify bottlenecks and suggest targeted refinements. This loop yields deeper insight into each design point, higher-quality decisions, and a more effective search. Across four AI inference workloads (models of varying complexity and a multi-model pipeline) on an Intel Meteor Lake SoC, TraceDSE consistently outperforms two state-of-the-art BBO tools, improving Pareto frontier hypervolume by up to 35% over NSGA-II and up to 68% over Bayesian optimization, while requiring ~6-9x fewer hardware evaluations.

0.38

Agentic RF Intelligence: Multi-Timescale 6G Sensing and Reasoning with On-Device Foundation Models

eess.SP ·2026-10-02 ·Jaron Fontaine, Jelle De Moerloose, Xander Vanparys, Anton Lambrecht, Eli De Poorter +1 more
published similarity 0.63
Abstract · Accepted at the NeurIPS 2026 Workshop on On-Device Intelligence: Foundation Models under Real-World Constraints

Future 6G systems share a central challenge with Physical AI: combining sensing, reasoning, and action on network-edge infrastructure in rapidly changing physical environments under strict latency, compute, and energy constraints. Addressing this challenge requires multi-timescale intelligence, combining fast perception that tracks wireless phenomena within milliseconds with slower reasoning that directs sensing and adapts network policies and resources over seconds. In this paper, we present a vision for Agentic RF Intelligence based on a dual-loop architecture that decouples fast, locally autonomous wireless sensing (e.g., detecting spectrum dynamics, interference, and signal sources) from slower agentic reasoning and orchestration. We provide an on-device prototype in which the full stack runs on a single NVIDIA Jetson Thor connected to a B200 Mini USRP. The fast loop processes IQ samples using signal-processing tools and wireless physical-layer foundation models (WPFM), while a local Large Language Model (LLM) asynchronously interprets RF events, invokes tools and steers sensing. Our experiments confirm the separation in timescales, as WPFMs operate at millisecond latency, while LLM interactions take seconds to minutes. The fast loop remains operational during agentic reasoning, providing initial evidence for the feasibility of this decoupled architecture. We conclude by outlining extensions toward memory-driven self-improvement, world models, network control, and multi-agent operation.

0.30