CS Paper Radar

Online Open-World Wafer Defect Discovery using Hyperdimensional Computing

Quanling Zhao, Ava Emami, Tsuyoshi Idé, Rajiv Joshi, Steven Holmes, Michael Passow, Tajana Rosing

cs.LG ·submitted 2026-10-20 22:02 UTC · v2

Abstract

Conventional wafer defect analysis relies on offline, closed-world classifiers that fail to detect novel, unseen defect signatures emerging during continuous semiconductor manufacturing. To address this, we propose WaferHDC, an online open-world wafer defect discovery framework based on hyperdimensional computing (HDC). The memory-centric architecture of WaferHDC enables rapid anomaly detection and grouping of recurring failures into compact hypervector representations. This allows the memory space to dynamically scale with new defect modes without retraining a static classifier or archiving entire raw wafer history. WaferHDC first models normal spatial distributions, then dynamically groups recurring failures into persistent defect memory without labels or predefined class counts. It outperforms the strongest online baseline by 13.3 p.p. in adjusted Rand index and 10.5 p.p. in normalized mutual information on the industry-standard WM-811K dataset. These results demonstrate the effectiveness of WaferHDC for continuous and open-world wafer defect analysis.

Closest papers

Nearest neighbours by meaning across the whole index.

Morphology-Aware Ambiguity Learning for Wafer Defect Decision Support

cs.CV ·2026-09-18 ·Seungjun Chu, Seokhyun Chung
similarity 0.63
Abstract

Wafer map defect recognition is commonly formulated as a fixed-taxonomy classification problem that assigns each wafer to a single defect class. However, some wafers exhibit morphologies near class boundaries, for which forcing a single prediction may be less informative than providing plausible diagnostic alternatives. This paper proposes a morphology-aware ambiguity learning framework that supports three diagnostic actions: automatic single-class diagnosis, assisted diagnosis with two plausible defect classes, and full review. Using the radial, angular, and geometric characteristics of training wafer maps, the framework constructs a class-level ambiguity matrix representing defect-class pairs with similar morphology and plausible diagnostic alternatives. It guides the model to learn plausible alternative classes rather than treating all incorrect classes equally. During inference, the matrix determines whether an uncertain prediction can be represented by a meaningful two-class diagnostic set or should be escalated for full review. Experiments on WM-811K show that the proposed framework outperforms conventional approaches in defect recognition and diagnostic decision support, providing meaningful two-class alternatives while reserving full review for cases with unresolved ambiguity. Illustrative cost analyses further show the potential cost advantage of the proposed routing strategy. The diagnostic behavior of the framework remains consistent across different backbone architectures.

0.28

Efficient Patch-Based Anomaly Detection Fused with Diffusion Driven Generative Modeling for Semiconductor Wafer Bin Map Open Set Anomaly Detection

cs.LG cs.AI ·2026-10-07 ·Limon Bin Hossain, Md Sadib Rahman Ananta
benchmark similarity 0.63
Abstract

Spatial defect signatures on wafer bin maps (WBMs) trace yield loss to specific process faults, yet supervised classifiers recognize only the defect types seen during training, and one-class detectors built on a single mechanism tend to capture either local structural deviations or global distributional violations, but rarely both. This work proposes a hybrid one-class framework that couples a patch-based student-teacher detector (EfficientAD) with a denoising diffusion probabilistic model (DDPM) used for partial-diffusion reconstruction, and fuses their percentile-calibrated scores through a fixed convex combination. Trained on only 700 normal wafers from the WM-38K mixed-type dataset and evaluated on 18,658 held-out wafers, the fused detector reached an AUROC of 0.9985 and reduced misclassifications from 852 (DDPM) and 1,412 (EfficientAD) to 618, with all pairwise differences significant at p < 0.001. Beyond aggregate accuracy, the analysis shows that the gain arises from weakly overlapping errors between the two modules, yet fixed-weight fusion recovers only 40-70% of the correction available to an oracle selector. Under the benchmark's inverted class balance, average precision and F1 saturate, while the Matthews correlation coefficient and negative predictive value expose unreliable normal predictions. Pixel-level maps further show that strong image-level separability does not imply spatial localization, and the diffusion module succeeds as a local density prior rather than through global geometric reasoning. These findings motivate sample-adaptive fusion and imbalance-aware evaluation of hybrid wafer anomaly detectors.

0.25

Detecting Defects that Matter: An Application-Driven Benchmark for Anomaly Detection in Manufacturing and Retail Logistics (VAND 4.0 Challenge)

cs.CV ·2026-10-03 ·Lars Heckler-Kram, Dorian Henning, Ashwin Vaidya, Jan-Hendrik Neudeck, Ulla Scheler +4 more
benchmark similarity 0.60
Abstract

Existing Anomaly Detection benchmarks are saturated and often unrealistic. As part of the VAND 4.0 Challenge, we introduce a hidden-test, application-driven benchmark across two deployment-critical domains: industrial manufacturing and retail logistics. In the Industrial Track (MVTec AD 2), the results reveal that unsupervised anomaly segmentation remains challenging: the best regular-setting method achieves only ~57\% pixel-level $SegF_1$, indicating substantial room for improvement. Zero-shot approaches trail by ~15 $SegF_1$ points, confirming that task-specific training on normal data remains essential for precise defect localization. Robustness to distribution shifts remains a key open challenge and DINOv3-backbones clearly dominate this track. In the Retail Track (Kaputt 2), the results reveal that (1) supervised defect detection is approaching saturation for common defect types; (2) the best off-the-shelf VLM approach trails specialized models by ~28 AP, confirming that currently VLMs cannot replace fine-tuned detectors, (3) reference images did not prove helpful for top-performing approaches. Performance collapses on rare defects (spillage ~53 AP, missing units ~27 AP), where the supervised ceiling is bounded by data availability. To drive future progress in this domain, we provide a new low-prevalence retail AD dataset (Kaputt-Rare). Across both tracks, computational efficiency is assessed as a first-class metric combining performance, throughput, memory, and power consumption. We introduce a novel metric for measuring efficiency and reveal that that top-performing methods rely on heavy architectures while efficiency is largely neglected. Overall, we conclude that the community needs (a) more efficiency-aware method development, and (b) true anomaly detection approaches for rare defects and shifting conditions. https://sites.google.com/view/vand4-cvpr2026/challenge

0.31

SePArate: Segmenting Patterns from Defects in Wafer Manufacturing Using Weak Supervision

cs.CV cs.AI ·2026-08-31 ·Dain Kwon, Changmin Shin, Sunjong Park, Kanghyun Choi, Hyeyoon Lee +3 more
published similarity 0.59
Abstract · 7 pages, 8 figures. Accepted at the 63rd ACM/IEEE Design Automation Conference (DAC 2026)

In semiconductor manufacturing, defect analysis is essential, but manual inspection cannot scale. However, existing automated inspection methods remain insufficient for root-cause analysis and process optimization. To this end, we present SePArate, a weakly supervised wafer defect segmentation method. SePArate enables pixel-level separation of patterns by leveraging only image-level annotations. It consists of a three-phase training: encoder pretraining, knowledge transfer to learn spatial cues, and training on synthetic mixed-defect data for accurate segmentation. Experiments demonstrate that SePArate outperforms the baselines.

0.30

Cross-Scenario Industrial Defect Detection via Domain-Robust Training and Metric-Aligned Selection

cs.CV ·2026-10-14 ·Dikai Li, Weijia Wang, Yuan-Gen Wang
top venuecode/data similarity 0.59
Abstract · This paper has been accepted for presentation in IEEE ICME 2026

Automated defect detection of industrial boards must remain highly reliable under cross-scenario variations in lighting, surface contaminants, and production line conditions. This makes cross-scenario defect detection a domain generalization problem, wherein models are required to detect, localize, and classify defects across unseen scenarios while minimizing false alarms on clean boards. For the IDA 2026 Track 1 challenge, we propose a cross-scenario defect detection method that includes four complementary modules: cross-scenario robust training, small-defect-aware learning, score calibration and inference threshold selection, and metric-aligned checkpoint selection. These four modules respectively introduce cross-scenario robust normalization and DSU-style statistic perturbation with progressive random convolution, NWD and parameter-free spatial attention, the VFL learning objective, and a custom SWAD variant driven by the Track 1-oriented proxy. Experimental results demonstrate that our model achieves a Track 1 score of 0.564 with a screening score of 0.696 on the test dataset on a single RTX 4090 GPU. The code is available at https://github.com/GZHU-DVL/Dikai.

0.40

Towards Generalizable 3D Anomaly Detection via Relational Inconsistency Modeling

cs.CV ·2026-09-28 ·KunHo Heo, SuYeon Kim, Hayoung Lee, Chanse Oh, MyeongAh Cho
top venuecode/data similarity 0.59
Abstract · Accepted by NeurIPS 2026. Code: https://github.com/VisualScienceLab-KHU/GRIM

3D anomaly detection (3DAD) aims to identify defective regions in point cloud data, serving as a critical component in industrial inspection systems. Existing methods are normality-centered -- learning the distribution of normal samples and treating deviations as anomalies -- without explicitly modeling what constitutes a defect. This leads to ambiguous decision boundaries with increased false positives and negatives, particularly in unified and cross-domain settings where diverse normal distributions further blur the boundaries. We propose a relational inconsistency modeling framework that characterizes defects as violations of geometric consistency among neighboring structures. Our approach learns category-agnostic defect cues through pseudo-anomalies designed as controlled relational violations, instantiated by two key modules: Edge-aware Graph Refinement (EGR) for encoding geometric relationships among local regions, and Cluster-Deviation Modeling (CDM) for identifying regions that are relationally incompatible within their structural peer group. Extensive experiments on Anomaly-ShapeNet and Real3D-AD demonstrate consistent improvements over prior state-of-the-art methods in both in-domain and cross-domain settings, validating the effectiveness of learning an explicit, relation-based defect criterion for 3D anomaly detection. Project page: https://visualsciencelab-khu.github.io/GRIM_project/.

0.48

Uncertainty-aware Feedback Loop Diagnosis: integrating reinforcement learning and conformal prediction for reliable wafer defect classification

cs.LG cs.CV ·2026-10-29 ·Aleksandr Dekhovich, Carlas Smith, Oleg Soloviev
similarity 0.56
Abstract

Semiconductor manufacturing is a complex, multi-step process that requires both high precision and low operating costs. Therefore, detecting defects in a high-volume setting is an important component of wafer map analysis for reliable production. However, most state-of-the-art deep learning approaches require a full scan of the surface, which hinders the development of high-throughput inspection systems. To address this problem, we propose Uncertainty-aware Feedback Loop Diagnosis (UFLD), a novel algorithm that employs reinforcement learning for adaptive measurement acquisition and provides a prediction uncertainty level after each step, stopping the process once sufficient information is obtained. Unlike existing methods that rely on ensemble models or auxiliary confidence estimation deep learning models, UFLD utilizes a more parameter-efficient conformal prediction framework to determine the optimal stopping time. The proposed UFLD reduces acquisition time by about $40\%$ and achieves $98.4\%$ inspection accuracy, without requiring an additional learned confidence-estimation network. We validated our approach on the MixedWM38 dataset, demonstrating its advantages over existing adaptive acquisition procedures and standard convolutional neural networks.

0.21

ScrewSense: Mapping the Invisible - Anomaly Detection and Error Classification in Screwdriving Processes

cs.LG cs.ROeess.SP ·2026-11-12 ·Tobias Lettner, Tatyana Ivanovska, Anwar Al Assadi, Christian Bergler
published similarity 0.56
Abstract · Accepted manuscript, 59th CIRP Conference on Manufacturing Systems (CMS 2026). 6 pages, 8 figures, 3 tables

The growing volume of process data generated by screwdriving systems, combined with advancements in computing power, data storage, and algorithms, is facilitating the application of artificial intelligence in this field. Accurately detecting and classifying screwdriving errors is crucial for ensuring product quality, avoiding costly rework in manufacturing, and supporting sustainability by facilitating the maintenance, reuse, and recycling of screw-connected products. In this context, machine learning approaches offer a promising alternative to traditional monitoring techniques, such as window-based methods or envelope curves. This study examines the use of deep learning techniques for anomaly detection and error classification in screwdriving processes. The data corpus consists of multivariate time series capturing process parameters, such as torque and rotation angle. For anomaly detection, the embedding space of a vector quantized variational autoencoder was analyzed. In terms of error classification, four different model architectures were evaluated. The results demonstrate the effectiveness of anomaly detection and confirm that deep learning models can distinguish between multiple error categories beyond traditional binary classification. This extends the capabilities of conventional monitoring approaches, achieving accuracies of up to 100%. Additionally, real-world data material was examined in order to further demonstrate model robustness. Overall the results indicate strong generalization capability and highlight the practical potential of the developed models for use in industrial screwdriving processes, eliminating the need for expert knowledge in error identification and significantly reducing manual effort and analysis time.

0.40