CS Paper Radar

Uncertainty-aware Feedback Loop Diagnosis: integrating reinforcement learning and conformal prediction for reliable wafer defect classification

Aleksandr Dekhovich, Carlas Smith, Oleg Soloviev

cs.LG cs.CV ·submitted 2026-10-29 16:45 UTC · v1

Abstract

Semiconductor manufacturing is a complex, multi-step process that requires both high precision and low operating costs. Therefore, detecting defects in a high-volume setting is an important component of wafer map analysis for reliable production. However, most state-of-the-art deep learning approaches require a full scan of the surface, which hinders the development of high-throughput inspection systems. To address this problem, we propose Uncertainty-aware Feedback Loop Diagnosis (UFLD), a novel algorithm that employs reinforcement learning for adaptive measurement acquisition and provides a prediction uncertainty level after each step, stopping the process once sufficient information is obtained. Unlike existing methods that rely on ensemble models or auxiliary confidence estimation deep learning models, UFLD utilizes a more parameter-efficient conformal prediction framework to determine the optimal stopping time. The proposed UFLD reduces acquisition time by about $40\%$ and achieves $98.4\%$ inspection accuracy, without requiring an additional learned confidence-estimation network. We validated our approach on the MixedWM38 dataset, demonstrating its advantages over existing adaptive acquisition procedures and standard convolutional neural networks.

Closest papers

Nearest neighbours by meaning across the whole index.

Deep Vision in Smart Manufacturing: MODERN Framework for Intelligent Quality Monitoring and Diagnosis

cs.LG stat.ML ·2026-08-14 ·Yicheng Kang, Yuling Jiao, Xin Geng, Mahesh Nagarajan
similarity 0.69
Abstract

Smart manufacturing processes are often installed with a large number of sensors, imaging devices and computers, which not only enable instant communication across various modules of a production system but also aid in intelligent manufacturing management. In this paper, we introduce MODERN, a deep learning framework for quality monitoring and fault isolation, which integrates these enhanced capabilities into the practice of industrial quality control. Using the architecture of an inception residual neural network, we develop a control chart that monitors the likelihood of a product containing defects. We also propose a faulty region estimator that identifies the defective area using transfer learning. To extend our framework to cases where there are not sufficient training data, we suggest a transfer monitoring technique that requires only a small sample size and a hypothesis testing approach for quantitatively assessing the applicability of our method. Theoretically, we establish the minimax optimal convergence rate for both our defect likelihood estimation and fault diagnosis. Our results lead to a seemingly counter-intuitive managerial implication - it may not always be in a manufacturer's best interests to keep upgrading its monitoring equipment regardless of the cost. Empirically, we demonstrate the superior performance of our method in comparison with a state-of-the-art approach using both simulated experiments and real data.

0.04

Epistemic Uncertainty-Aware Defect Detection for Quality Control in Medical Device Manufacturing

cs.AI ·2026-10-06 ·Raham A. Butt, Marco Romanelli, Roche C. de Guzman
similarity 0.66
Abstract

Objective: We investigate whether accounting for epistemic uncertainty can improve the reliability of automated defect detection in medical device manufacturing. Methods: We consider a machine learning framework that operates on heterogeneous manufacturing and device-report data represented with Knowledge Graphs. To mitigate errors arising from uncertainty in the decision model, we analyze a principled rejection strategy to abstain from predictions whose estimated epistemic uncertainty exceeds a specified threshold. We evaluate the approach using standard synthetic benchmarks and real-world medical device report data. Results: The theoretical results establish the validity of the method characterizing the regimes under which it is expected to be effective. Empirically, the rejection strategy enables explicit control of coverage, that is, the proportion of samples for which the model issues predictions, while improving performance on the retained samples. On 266,170 real-world FDA MAUDE device reports, a 10% abstention rate reduces classification error by 48%, and more aggressive rejection (approximately 70% coverage) yields near-perfect accuracy on the retained samples. On standard synthetic manufacturing benchmarks, abstaining on 9% of the decisions, our approach reduces the risk up to 63% compared with the standard no-abstention approach. Conclusions: Abstaining from predictions with high epistemic uncertainty can provide a practical tool for controlling the reliability of machine learning-based defect detection, especially in high-stakes medical device manufacturing applications. Significance: Uncertainty-aware defect detection may support safer and more reliable quality assurance in medical device manufacturing by identifying cases that require additional inspection rather than issuing potentially harmful predictions.

0.22

FuDU: A Fuzzy Dual-dimensional Uncertainty Framework for Streaming Active Learning in Industrial Defect Detection

cs.CV ·2026-09-02 ·Zhaoyang Wang, Haiyong Chen, Binyi Su, Xinwei Lyu
top venuecode/data similarity 0.65
Abstract · Accepted at ECCV 2026

Ensuring the reliability of deep learning models in real-time industrial defect detection is critical for high-stakes quality inspection. To mine uncertain samples within continuous industrial media streams, thereby enhancing the reliability of the detection system, this paper proposes a streaming active learning method based on the Fuzzy Dual-dimensional Uncertainty (FuDU) framework. Specifically, we first design a Prototype-based Global Uncertainty Quantification (PGUQ) module on the backbone to evaluate image-level uncertainty via normal/defective feature prototypes. A Dual-entropy defect Uncertainty Evaluator (DeUE) is then integrated into the detection head to quantify box-level uncertainty. Finally, by modeling uncertainty as systematic error, we propose a fuzzy dual-dimensional uncertainty-aware strategy that leverages fuzzy inference to fuse dual-dimensional uncertainties, enabling expert knowledge-driven adaptive sampling decisions. Comprehensive experiments demonstrate that FuDU is efficient and flexible, making it well-suited for challenging industrial inspection tasks such as the detection of nuclear fuel rod defects. Our code is publicly available at: https://github.com/wangzhaoyang-508/FuDU.

0.53

Physical-Variable-Informed Deep Learning for Robust Diagnosis in Industrial Fluid Transport Systems

cs.LG cs.AI ·2026-10-20 ·Yu Sha, Junqi Tao, Dixin Zhou, Horst Stoecker, Domagoj Vnucec +2 more
similarity 0.62
Abstract · 29 pages, 5 figures

Industrial fluid transport systems are monitored through heterogeneous sensing streams, but robust fault diagnosis remains difficult because response signals vary with operating conditions and differ from physical variables in sampling rate, observation duration and data granularity. To address these challenges, we propose a physical-variable-informed deep learning framework (PhyNet) for robust fault diagnosis under real-world sampling heterogeneity. PhyNet treats physical variables as global operating constraints and response signals as local diagnostic evidence. Its physical-to-response cross-attention mechanism connects sequence-level physical-variable tokens with a learnable global response token, enabling interaction without strict temporal alignment. Across four benchmarks, including three real-world cavitation datasets and one public two-phase-flow dataset, PhyNet achieves the best performance across all evaluated metrics. Class-wise analyses, together with attention and masking analyses, show improved discrimination of ambiguous states and indicate that physical variables meaningfully constrain local response interpretation. These findings demonstrate a deployment-oriented approach to robust diagnosis in heterogeneous industrial environments.

0.33

Trustworthy Visual Quality Inspection under Data Scarcity in Manufacturing

cs.CV ·2026-08-22 ·Panagiotis Sapoutzoglou, Jessy Ribaira, Martin Kanounnikoff, Bas Tijsma, Christian Geiß +1 more
published similarity 0.62
Abstract · Accepted at International Conference on the Economics of Grids, Clouds, Systems, and Services (GECON) 2026

Automated visual inspection in manufacturing aims to replace slow and inconsistent manual checks, but its economic value depends on whether its decisions can be trusted enough to automate routine inspection while reserving human expertise for ambiguous cases. In production-line settings, defective samples are scarce, since the process is optimized to produce good parts, which limits any learning-based inspector trained on real data alone. Compounding this, defect decisions emitted as hard labels with no confidence estimate carry an asymmetric cost: a false reject wastes a good product, while a false accept may increase the risk of undetected defects progressing through the production process. We address both problems by mitigating data scarcity through the generation of synthetic defective samples with a diffusion model, and meeting the need for confidence-aware decisions with a Bayesian classifier that defers ambiguous units to human review rather than misclassifying them. These components are embedded in a staged pipeline of successive, complementary checks. We evaluate how synthetic augmentation affects classification and localization on a test set of real defects, and examine the system's trustworthiness at three points: the decision, the synthetic data, and the pipeline structure. This work-in-progress reports preliminary results suggesting that diffusion-generated defects, combined with uncertainty-aware classification, can lower the cost of reaching a trustworthy, deployable inspection model under data scarcity.

0.28

Uncertainty and Business-Aware Remaining Useful Life Estimation for Semiconductor Manufacturing

cs.LG ·2026-08-26 ·Davide Frizzo, Francesco Borsatti, Gian Antonio Susto
similarity 0.61
Abstract · Submitted to IEEE Transactions on Semiconductor Manufacturing

Remaining Useful Life (RUL) estimates guide maintenance in semiconductor manufacturing, where a late intervention can disrupt production but an early one discards usable equipment life. A single prediction does not express the uncertainty needed to choose between these outcomes. We combine Deep Learning (DL) sequence models with Simoultaneous Quantile Regression (SQR) to estimate RUL at selectable quantile levels, and evaluate maintenance decisions using Unexpected Breaks (UB), Unexploited Lifetime (UL), and a cost-weighted objective. On the $F_1$ fault mode of the 2018 PHM Data Challenge (PHM18) ion-milling dataset, we compare recurrent, Transformer, and State Space Models (SSM) architectures. Diagonal State Spaced (S4D) gives the strongest overall RUL accuracy across the evaluated quantiles. Varying the quantile and maintenance window exposes the trade-off between failure risk and early intervention; under the examined cost ratios, the resulting decisions have lower cost than the Preventive Maintenance (PvM) baselines.

0.22

Exploring the link between predictive uncertainty and the sim-to-real gap in deep learning models utilizing synthetic data

cs.CV ·2026-11-16 ·Alexander Moriz, Lukas Krebs, Amon Göppert, Robert H. Schmitt
similarity 0.61
Abstract · A Preprint

Today, state-of-the-art methods for quality control (QC) are based on Machine Vision, combining deep learning (DL) models with camera-based inspection. Yet, the integration of such solutions in industrial applications is often impeded by data sparsity and trust in model reliability. While synthetic data offers a promising approach to generate the necessary data with perfect annotations, it poses risks related to performance degradation due to the possible occurrence of the sim-to-real gap. This study conducts experiments using the ensemble method to estimate the predictive uncertainty of DL models trained on synthetic data. The results show that predictive uncertainty increases under the sim-to-real domain shift. However, the observed performance drop is dominated by a systematic sim-to-real bias rather than by ensemble disagreement.These findings contribute to the effective utilization of synthetic data in industrial settings while highlighting the importance of risk assessment for the deployment of DL solutions for QC tasks.

0.20

Cross-Scenario Industrial Defect Detection via Domain-Robust Training and Metric-Aligned Selection

cs.CV ·2026-10-14 ·Dikai Li, Weijia Wang, Yuan-Gen Wang
top venuecode/data similarity 0.59
Abstract · This paper has been accepted for presentation in IEEE ICME 2026

Automated defect detection of industrial boards must remain highly reliable under cross-scenario variations in lighting, surface contaminants, and production line conditions. This makes cross-scenario defect detection a domain generalization problem, wherein models are required to detect, localize, and classify defects across unseen scenarios while minimizing false alarms on clean boards. For the IDA 2026 Track 1 challenge, we propose a cross-scenario defect detection method that includes four complementary modules: cross-scenario robust training, small-defect-aware learning, score calibration and inference threshold selection, and metric-aligned checkpoint selection. These four modules respectively introduce cross-scenario robust normalization and DSU-style statistic perturbation with progressive random convolution, NWD and parameter-free spatial attention, the VFL learning objective, and a custom SWAD variant driven by the Track 1-oriented proxy. Experimental results demonstrate that our model achieves a Track 1 score of 0.564 with a screening score of 0.696 on the test dataset on a single RTX 4090 GPU. The code is available at https://github.com/GZHU-DVL/Dikai.

0.40