CS Paper Radar

Deep Vision in Smart Manufacturing: MODERN Framework for Intelligent Quality Monitoring and Diagnosis

Yicheng Kang, Yuling Jiao, Xin Geng, Mahesh Nagarajan

cs.LG stat.ML ·submitted 2026-08-14 04:17 UTC · v1

Abstract

Smart manufacturing processes are often installed with a large number of sensors, imaging devices and computers, which not only enable instant communication across various modules of a production system but also aid in intelligent manufacturing management. In this paper, we introduce MODERN, a deep learning framework for quality monitoring and fault isolation, which integrates these enhanced capabilities into the practice of industrial quality control. Using the architecture of an inception residual neural network, we develop a control chart that monitors the likelihood of a product containing defects. We also propose a faulty region estimator that identifies the defective area using transfer learning. To extend our framework to cases where there are not sufficient training data, we suggest a transfer monitoring technique that requires only a small sample size and a hypothesis testing approach for quantitatively assessing the applicability of our method. Theoretically, we establish the minimax optimal convergence rate for both our defect likelihood estimation and fault diagnosis. Our results lead to a seemingly counter-intuitive managerial implication - it may not always be in a manufacturer's best interests to keep upgrading its monitoring equipment regardless of the cost. Empirically, we demonstrate the superior performance of our method in comparison with a state-of-the-art approach using both simulated experiments and real data.

Closest papers

Nearest neighbours by meaning across the whole index.

Uncertainty-aware Feedback Loop Diagnosis: integrating reinforcement learning and conformal prediction for reliable wafer defect classification

cs.LG cs.CV ·2026-10-29 ·Aleksandr Dekhovich, Carlas Smith, Oleg Soloviev
similarity 0.69
Abstract

Semiconductor manufacturing is a complex, multi-step process that requires both high precision and low operating costs. Therefore, detecting defects in a high-volume setting is an important component of wafer map analysis for reliable production. However, most state-of-the-art deep learning approaches require a full scan of the surface, which hinders the development of high-throughput inspection systems. To address this problem, we propose Uncertainty-aware Feedback Loop Diagnosis (UFLD), a novel algorithm that employs reinforcement learning for adaptive measurement acquisition and provides a prediction uncertainty level after each step, stopping the process once sufficient information is obtained. Unlike existing methods that rely on ensemble models or auxiliary confidence estimation deep learning models, UFLD utilizes a more parameter-efficient conformal prediction framework to determine the optimal stopping time. The proposed UFLD reduces acquisition time by about $40\%$ and achieves $98.4\%$ inspection accuracy, without requiring an additional learned confidence-estimation network. We validated our approach on the MixedWM38 dataset, demonstrating its advantages over existing adaptive acquisition procedures and standard convolutional neural networks.

0.21

Cross-Asset Knowledge Transfer for Early Fault Detection of Data-Scarce Assets Without Target Fault Data

cs.LG ·2026-11-04 ·Zekai Wang, Yuxuan Li, Zhangyue Shi
similarity 0.66
Abstract

Reliability management of industrial fleets depends on early fault warnings, yet lifecycle data across similar assets are highly imbalanced. A few assets accumulate run-to-failure histories, while newly installed or rarely failing assets provide only normal-condition data. This paper asks how diagnostic knowledge can be transferred from a data-rich source asset to a data-scarce target asset when no fault data have been observed on the target. We formulate cross-asset early fault detection as a zero-shot domain adaptation problem, in which zero-shot refers to the absence of target fault samples, and propose a framework that requires only normal data from the target. The framework comprises (1) a statistical process control step that labels the source asset run-to-failure data with an exponentially weighted moving average chart, reducing manual annotation to verifying flagged segments, (2) an Adapted Domain-Adversarial Neural Network (ADANN) that combines domain-adversarial training and a Maximum Mean Discrepancy penalty with an Adapted Classification-Domain (ACD) loss, which anchors the classifier normal region to the target own normal data, and (3) an ahead-of-time labeling scheme with a prediction horizon that targets incipient faults. Under an exact-classification assumption, a theoretical analysis characterizes the domain-adversarial term for a normal-only target and the alignment state in which source fault features remain separated from target normal features. On a public run-to-failure bearing dataset, ADANN attains the highest mean F1-score among four transfer baselines, with a nominally significant precision gain over the strongest baseline, and its robustness is examined under synthetic noise.

0.16

Physical-Variable-Informed Deep Learning for Robust Diagnosis in Industrial Fluid Transport Systems

cs.LG cs.AI ·2026-10-20 ·Yu Sha, Junqi Tao, Dixin Zhou, Horst Stoecker, Domagoj Vnucec +2 more
similarity 0.64
Abstract · 29 pages, 5 figures

Industrial fluid transport systems are monitored through heterogeneous sensing streams, but robust fault diagnosis remains difficult because response signals vary with operating conditions and differ from physical variables in sampling rate, observation duration and data granularity. To address these challenges, we propose a physical-variable-informed deep learning framework (PhyNet) for robust fault diagnosis under real-world sampling heterogeneity. PhyNet treats physical variables as global operating constraints and response signals as local diagnostic evidence. Its physical-to-response cross-attention mechanism connects sequence-level physical-variable tokens with a learnable global response token, enabling interaction without strict temporal alignment. Across four benchmarks, including three real-world cavitation datasets and one public two-phase-flow dataset, PhyNet achieves the best performance across all evaluated metrics. Class-wise analyses, together with attention and masking analyses, show improved discrimination of ambiguous states and indicate that physical variables meaningfully constrain local response interpretation. These findings demonstrate a deployment-oriented approach to robust diagnosis in heterogeneous industrial environments.

0.33

FuDU: A Fuzzy Dual-dimensional Uncertainty Framework for Streaming Active Learning in Industrial Defect Detection

cs.CV ·2026-09-02 ·Zhaoyang Wang, Haiyong Chen, Binyi Su, Xinwei Lyu
top venuecode/data similarity 0.63
Abstract · Accepted at ECCV 2026

Ensuring the reliability of deep learning models in real-time industrial defect detection is critical for high-stakes quality inspection. To mine uncertain samples within continuous industrial media streams, thereby enhancing the reliability of the detection system, this paper proposes a streaming active learning method based on the Fuzzy Dual-dimensional Uncertainty (FuDU) framework. Specifically, we first design a Prototype-based Global Uncertainty Quantification (PGUQ) module on the backbone to evaluate image-level uncertainty via normal/defective feature prototypes. A Dual-entropy defect Uncertainty Evaluator (DeUE) is then integrated into the detection head to quantify box-level uncertainty. Finally, by modeling uncertainty as systematic error, we propose a fuzzy dual-dimensional uncertainty-aware strategy that leverages fuzzy inference to fuse dual-dimensional uncertainties, enabling expert knowledge-driven adaptive sampling decisions. Comprehensive experiments demonstrate that FuDU is efficient and flexible, making it well-suited for challenging industrial inspection tasks such as the detection of nuclear fuel rod defects. Our code is publicly available at: https://github.com/wangzhaoyang-508/FuDU.

0.53

Trustworthy Visual Quality Inspection under Data Scarcity in Manufacturing

cs.CV ·2026-08-22 ·Panagiotis Sapoutzoglou, Jessy Ribaira, Martin Kanounnikoff, Bas Tijsma, Christian Geiß +1 more
published similarity 0.63
Abstract · Accepted at International Conference on the Economics of Grids, Clouds, Systems, and Services (GECON) 2026

Automated visual inspection in manufacturing aims to replace slow and inconsistent manual checks, but its economic value depends on whether its decisions can be trusted enough to automate routine inspection while reserving human expertise for ambiguous cases. In production-line settings, defective samples are scarce, since the process is optimized to produce good parts, which limits any learning-based inspector trained on real data alone. Compounding this, defect decisions emitted as hard labels with no confidence estimate carry an asymmetric cost: a false reject wastes a good product, while a false accept may increase the risk of undetected defects progressing through the production process. We address both problems by mitigating data scarcity through the generation of synthetic defective samples with a diffusion model, and meeting the need for confidence-aware decisions with a Bayesian classifier that defers ambiguous units to human review rather than misclassifying them. These components are embedded in a staged pipeline of successive, complementary checks. We evaluate how synthetic augmentation affects classification and localization on a test set of real defects, and examine the system's trustworthiness at three points: the decision, the synthetic data, and the pipeline structure. This work-in-progress reports preliminary results suggesting that diffusion-generated defects, combined with uncertainty-aware classification, can lower the cost of reaching a trustworthy, deployable inspection model under data scarcity.

0.28

Benchmarking Hybrid Deep Learning Architectures for Predictive Maintenance in Industry 4.0

cs.LG ·2026-09-18 ·Zhengyang, Gu, Joseph E. Hernandez, Thomas Cook, John Burtenshaw +2 more
published similarity 0.62
Abstract · Published in: 2026 IEEE International Conference on AI and Data Analytics (ICAD)

Predictive maintenance in Industry 4.0 refers to using data from sensors, machines, and production systems to estimate when equipment is likely to fail, so maintenance can be planned before a breakdown occurs [1]. However, a model that predicts maintenance may work perfectly in the lab but fail unexpectedly when applied to real factory data [2]. To solve this "reliability" gap, we evaluated six deep learning architectures across more than 700 experimental runs. We focused on the two dominant approaches in the field: Recurrent Neural Networks (RNNs), which process data step-by-step, like reading a sentence [3], and Transformers, a recent dominant approach, which look at the entire sequence at once to spot important connections [4]. We examined whether Transformers still outperform recurrent neural networks (RNNs) when the data includes noise [5]. We found that while Transformers excelled at tracking stable, slow-moving processes, they tend to overreact to chaotic data, mistakenly taking sensor noise for meaningful signals [6]. We also found that the hybrid method that combines a Long Short-Term Memory (LSTM) layer with a Transformer layer is more resilient to noisy data from factory shops [7]. Functioning as a noise filter, the LSTM smooths out data volatility, allowing the Transformer to focus on the bigger picture without being distracted [8]. The hybrid model did not just improve accuracy; it proved to be significantly more consistent than complex models, delivering reliable predictions regardless of how chaotic the underlying system became.

0.58

Fault Diagnosis of Dynamic Systems Under Unknown Operating Conditions: A Condition-Guided Selective Adaptation Approach

eess.SY ·2026-08-21 ·Jiaming Liu, Zeyi Liu, Hongshuo Zhao, Pengyu Han, Xiao He
similarity 0.62
Abstract

Fault diagnosis under unknown operating conditions remains challenging for dynamic industrial systems, as the distribution shift caused by changing operating conditions can significantly degrade the performance of diagnostic models in real-world applications. To address the problem, a condition-guided selective adaptation approach is proposed. Specifically, a novel continuous operating-condition adversarial learning strategy with progressive training is developed in the offline stage to enhance the generalization ability of the diagnostic model. During online deployment, residual operating-condition responses are exploited to identify reliable unlabeled samples from streaming data, which are then used to update the diagnostic model. Extensive experiments on real-world gearbox and motor datasets have demonstrated that the proposed framework outperforms state-of-the-art methods in diagnostic accuracy while maintaining relatively low test-time, showing its potential for practical industrial applications.

0.17

ScrewSense: Mapping the Invisible - Anomaly Detection and Error Classification in Screwdriving Processes

cs.LG cs.ROeess.SP ·2026-11-12 ·Tobias Lettner, Tatyana Ivanovska, Anwar Al Assadi, Christian Bergler
published similarity 0.62
Abstract · Accepted manuscript, 59th CIRP Conference on Manufacturing Systems (CMS 2026). 6 pages, 8 figures, 3 tables

The growing volume of process data generated by screwdriving systems, combined with advancements in computing power, data storage, and algorithms, is facilitating the application of artificial intelligence in this field. Accurately detecting and classifying screwdriving errors is crucial for ensuring product quality, avoiding costly rework in manufacturing, and supporting sustainability by facilitating the maintenance, reuse, and recycling of screw-connected products. In this context, machine learning approaches offer a promising alternative to traditional monitoring techniques, such as window-based methods or envelope curves. This study examines the use of deep learning techniques for anomaly detection and error classification in screwdriving processes. The data corpus consists of multivariate time series capturing process parameters, such as torque and rotation angle. For anomaly detection, the embedding space of a vector quantized variational autoencoder was analyzed. In terms of error classification, four different model architectures were evaluated. The results demonstrate the effectiveness of anomaly detection and confirm that deep learning models can distinguish between multiple error categories beyond traditional binary classification. This extends the capabilities of conventional monitoring approaches, achieving accuracies of up to 100%. Additionally, real-world data material was examined in order to further demonstrate model robustness. Overall the results indicate strong generalization capability and highlight the practical potential of the developed models for use in industrial screwdriving processes, eliminating the need for expert knowledge in error identification and significantly reducing manual effort and analysis time.

0.32