CS Paper Radar

Fault Diagnosis of Dynamic Systems Under Unknown Operating Conditions: A Condition-Guided Selective Adaptation Approach

Jiaming Liu, Zeyi Liu, Hongshuo Zhao, Pengyu Han, Xiao He

eess.SY ·submitted 2026-08-21 17:04 UTC · v1

Abstract

Fault diagnosis under unknown operating conditions remains challenging for dynamic industrial systems, as the distribution shift caused by changing operating conditions can significantly degrade the performance of diagnostic models in real-world applications. To address the problem, a condition-guided selective adaptation approach is proposed. Specifically, a novel continuous operating-condition adversarial learning strategy with progressive training is developed in the offline stage to enhance the generalization ability of the diagnostic model. During online deployment, residual operating-condition responses are exploited to identify reliable unlabeled samples from streaming data, which are then used to update the diagnostic model. Extensive experiments on real-world gearbox and motor datasets have demonstrated that the proposed framework outperforms state-of-the-art methods in diagnostic accuracy while maintaining relatively low test-time, showing its potential for practical industrial applications.

Closest papers

Nearest neighbours by meaning across the whole index.

A Time-Frequency-Condition Multimodal Fusion Foundation Model for Universal Rotating-Machinery Fault Diagnosis under Multi-Element Heterogeneous Scenarios

cs.CL cs.AI ·2026-11-11 ·Xinyu Zou, Jian Ma, Liang Ma, Chen Lu, Tao Peng +1 more
similarity 0.64
Abstract

Intelligent fault diagnosis models are typically developed for a single machine under a specific set of operating conditions, such that each new machine or condition requires retraining from scratch. This one-machine-one-model paradigm scales poorly. Although transfer learning and domain generalization can reduce the labeling burden, they primarily seek domain-invariant commonality, potentially discarding machine-specific characteristics that are critical for diagnosis. This paper proposes TFC-MMFD, a time-frequency-condition multimodal fusion foundation model for rotating-machinery fault diagnosis under multi-element heterogeneous scenarios. Statistical indicators, time-frequency images, vibration sequences, and textual machine and condition descriptions are tokenized into a unified language-like space, allowing inputs of different physical origin to be represented as a single sequence. A LLaMA backbone, together with cross-modal bidirectional attention and a Q-Former, then distills this sequence into fault-mode queries. Diagnosis is performed by matching these queries against natural-language fault-mode anchors rather than fixed class indices, while regression-adversarial condition disentanglement and condition-conditioned masked pre-training improve robustness to changing conditions. Across four progressive tasks on ten public bearing datasets spanning diverse bearing types, speeds, and loads, TFC-MMFD attains 99.40% accuracy and 99.16% macro-F1, maintains over 80% accuracy on most interpolated unseen conditions without adaptation, and improves from 20.26% to 95.63% accuracy on an unseen machine with only five labeled samples per class. It outperforms the strongest of eight domain-generalization baselines by 10.57 percentage points and compares favorably with a recent bearing foundation model while using less than half of its fine-tuning data.

0.15

Cross-Asset Knowledge Transfer for Early Fault Detection of Data-Scarce Assets Without Target Fault Data

cs.LG ·2026-11-04 ·Zekai Wang, Yuxuan Li, Zhangyue Shi
similarity 0.63
Abstract

Reliability management of industrial fleets depends on early fault warnings, yet lifecycle data across similar assets are highly imbalanced. A few assets accumulate run-to-failure histories, while newly installed or rarely failing assets provide only normal-condition data. This paper asks how diagnostic knowledge can be transferred from a data-rich source asset to a data-scarce target asset when no fault data have been observed on the target. We formulate cross-asset early fault detection as a zero-shot domain adaptation problem, in which zero-shot refers to the absence of target fault samples, and propose a framework that requires only normal data from the target. The framework comprises (1) a statistical process control step that labels the source asset run-to-failure data with an exponentially weighted moving average chart, reducing manual annotation to verifying flagged segments, (2) an Adapted Domain-Adversarial Neural Network (ADANN) that combines domain-adversarial training and a Maximum Mean Discrepancy penalty with an Adapted Classification-Domain (ACD) loss, which anchors the classifier normal region to the target own normal data, and (3) an ahead-of-time labeling scheme with a prediction horizon that targets incipient faults. Under an exact-classification assumption, a theoretical analysis characterizes the domain-adversarial term for a normal-only target and the alignment state in which source fault features remain separated from target normal features. On a public run-to-failure bearing dataset, ADANN attains the highest mean F1-score among four transfer baselines, with a nominally significant precision gain over the strongest baseline, and its robustness is examined under synthetic noise.

0.16

Physical-Variable-Informed Deep Learning for Robust Diagnosis in Industrial Fluid Transport Systems

cs.LG cs.AI ·2026-10-20 ·Yu Sha, Junqi Tao, Dixin Zhou, Horst Stoecker, Domagoj Vnucec +2 more
similarity 0.63
Abstract · 29 pages, 5 figures

Industrial fluid transport systems are monitored through heterogeneous sensing streams, but robust fault diagnosis remains difficult because response signals vary with operating conditions and differ from physical variables in sampling rate, observation duration and data granularity. To address these challenges, we propose a physical-variable-informed deep learning framework (PhyNet) for robust fault diagnosis under real-world sampling heterogeneity. PhyNet treats physical variables as global operating constraints and response signals as local diagnostic evidence. Its physical-to-response cross-attention mechanism connects sequence-level physical-variable tokens with a learnable global response token, enabling interaction without strict temporal alignment. Across four benchmarks, including three real-world cavitation datasets and one public two-phase-flow dataset, PhyNet achieves the best performance across all evaluated metrics. Class-wise analyses, together with attention and masking analyses, show improved discrimination of ambiguous states and indicate that physical variables meaningfully constrain local response interpretation. These findings demonstrate a deployment-oriented approach to robust diagnosis in heterogeneous industrial environments.

0.33

Deep Vision in Smart Manufacturing: MODERN Framework for Intelligent Quality Monitoring and Diagnosis

cs.LG stat.ML ·2026-08-14 ·Yicheng Kang, Yuling Jiao, Xin Geng, Mahesh Nagarajan
similarity 0.62
Abstract

Smart manufacturing processes are often installed with a large number of sensors, imaging devices and computers, which not only enable instant communication across various modules of a production system but also aid in intelligent manufacturing management. In this paper, we introduce MODERN, a deep learning framework for quality monitoring and fault isolation, which integrates these enhanced capabilities into the practice of industrial quality control. Using the architecture of an inception residual neural network, we develop a control chart that monitors the likelihood of a product containing defects. We also propose a faulty region estimator that identifies the defective area using transfer learning. To extend our framework to cases where there are not sufficient training data, we suggest a transfer monitoring technique that requires only a small sample size and a hypothesis testing approach for quantitatively assessing the applicability of our method. Theoretically, we establish the minimax optimal convergence rate for both our defect likelihood estimation and fault diagnosis. Our results lead to a seemingly counter-intuitive managerial implication - it may not always be in a manufacturer's best interests to keep upgrading its monitoring equipment regardless of the cost. Empirically, we demonstrate the superior performance of our method in comparison with a state-of-the-art approach using both simulated experiments and real data.

0.04

Generative multi-domain transfer learning for fault detection in data-scarce wind turbines

cs.LG ·2026-08-31 ·Stefan Jonas, Angela Meyer
code/data similarity 0.61
Abstract

Normal behavior models have shown promise for reliable fault detection in wind turbines. However, these unsupervised anomaly detection models require sufficient fault-free training data to learn the normal operation behavior of turbines. Under data scarcity, for example in newly deployed wind turbines, these models may result in poor fault detection performance. In this work, we propose a multi-domain generative domain mapping approach based on Star Generative Adversarial Networks (StarGAN) to improve fault detection on data-scarce wind turbines. Our model maps SCADA measurements from a data-scarce turbine to resemble those of several data-rich turbines. By preserving the operational state during translation, faults occurring in a data-scarce domain can be mapped and detected by reliable pre-trained normal behavior models of data-rich domains. Highlighting the benefits of an ensemble fusion strategy, we show that under severe data scarcity our method can produce anomaly scores comparable to models trained on large representative datasets. Our approach can consistently outperform models trained on scarce data when less than 2 weeks of training data are available. With just 2 weeks of accumulated training data, we achieve an anomaly score similarity that is, on average, +16% higher than conventional fine-tuning, and +10% higher than single-source domain mapping. As a step towards unsupervised model selection, we propose a proxy metric that detects poor performance at training time, despite an absence of anomalies. Our study presents the potential and challenges of multi-domain mapping for wind turbine fault detection under unrepresentative training data.

0.28

LaplaceDiag: Fault Diagnosis through Changes in Learned Actuator Effects

cs.AI cs.LG ·2026-11-02 ·Oliver Niggemann
similarity 0.61
Abstract

Identifying faulty components from sensor anomalies is difficult because fault effects can propagate through a plant and different faults can produce similar observations. Detailed component models and labeled fault examples may also be unavailable. We introduce LaplaceDiag, a data-driven method that uses changes in actuator effects to narrow the search for faulty equipment. Actuators act on specific devices and mechanisms, so their changed effects can provide clues to root causes. LaplaceDiag learns a healthy plant model with LaplaceNet, a neural network that operates in Laplace space. It separates nonlinear prediction based on measured history from an explicit matrix that describes how actuator values affect sensor values. Keeping the history predictor fixed allows current actuator effects to be estimated by linear regression without retraining the neural network. Comparison with a healthy reference accounts for estimation uncertainty and normal variation to detect changes and generate actuator-related diagnostic hypotheses. The method supports online and offline diagnosis, providing an intermediate step between anomaly detection and identifying faulty components. We successfully evaluate LaplaceDiag on two datasets.

0.27

Streaming Virtual Metrology via Lightweight Adaptation under Temporal Distribution Shifts

cs.LG ·2026-10-31 ·Doyun Choi, Cheonwoo Lee, Younghyun Han, Kiwook Han, Jinkook Park +3 more
published similarity 0.57
Abstract · Accepted at IEEE BigData 2026. 10pages

Virtual metrology (VM) aims to estimate costly or delayed metrology variables from heterogeneous sensor signals and in-line measurements, and it acts as a critical component of semiconductor manufacturing. While recent data-driven models have improved VM accuracy, most are trained in batch settings and assume stationary data distributions. In practice, however, production environments evolve continuously due to equipment degradation, process adjustments, and maintenance events, making conventional batch-trained VM models difficult to maintain under temporal distribution shifts. In this work, we propose GRAPE (Global Regression with Adaptive Prediction Enhancement), a practical online learning framework for VM in evolving wafer-processing environments. GRAPE integrates a stable global predictor based on interpretable representations with two lightweight streaming adapters that correct feature-level and environment-level shifts through online updates. Experiments on two real-world semiconductor manufacturing datasets, including chronologically held-out blind-test streams, show that GRAPE improves robustness and generalization under real temporal drift compared with both conventional batch-learning methods and existing online learning baselines.

0.37

When Labels Are Scarce: An Oscillatory State Space Model for Vibration Diagnosis

cs.LG eess.SP ·2026-09-23 ·Mainak Mallick, Seung-Kyum Choi
benchmark similarity 0.57
Abstract

Machine fault diagnosis from vibration requires learning from scarce labelled fault recordings while meeting the computational constraints of edge devices for local inference. We introduce DualRes, a compact oscillatory state-space model that combines two complementary spectral views of vibration, capturing rapid changes and fine frequency structure. Time-aligned views are processed by selective oscillatory memory, which learns how long to retain temporal patterns. The encoder contains 39,528 parameters. We evaluate supervised learning across six bearing datasets and a gearbox benchmark, with an additional gearbox pilot. Recording-level splits and explicit accounting of labelled duration distinguish data efficiency from repeated exposure to correlated samples. On the main gearbox benchmark, DualRes achieves state-of-the-art performance among the nine evaluated methods at six of seven label budgets. With about six labelled seconds per class, it improves macro-F1 by 16.1 percentage points over the next strongest comparator. On the same benchmark, DualRes achieves a 1.44-fold recording-level speedup and a 24.8-fold reduction in checkpoint storage relative to a selective state-space baseline under matched hardware and runtime conditions. Bearing results reveal task-dependent trade-offs. These findings support oscillatory memory as a compact approach to vibration diagnosis under limited labelled exposure.

0.30