CS Paper Radar

Cross-Asset Knowledge Transfer for Early Fault Detection of Data-Scarce Assets Without Target Fault Data

Zekai Wang, Yuxuan Li, Zhangyue Shi

cs.LG ·submitted 2026-11-04 09:08 UTC · v3

Abstract

Reliability management of industrial fleets depends on early fault warnings, yet lifecycle data across similar assets are highly imbalanced. A few assets accumulate run-to-failure histories, while newly installed or rarely failing assets provide only normal-condition data. This paper asks how diagnostic knowledge can be transferred from a data-rich source asset to a data-scarce target asset when no fault data have been observed on the target. We formulate cross-asset early fault detection as a zero-shot domain adaptation problem, in which zero-shot refers to the absence of target fault samples, and propose a framework that requires only normal data from the target. The framework comprises (1) a statistical process control step that labels the source asset run-to-failure data with an exponentially weighted moving average chart, reducing manual annotation to verifying flagged segments, (2) an Adapted Domain-Adversarial Neural Network (ADANN) that combines domain-adversarial training and a Maximum Mean Discrepancy penalty with an Adapted Classification-Domain (ACD) loss, which anchors the classifier normal region to the target own normal data, and (3) an ahead-of-time labeling scheme with a prediction horizon that targets incipient faults. Under an exact-classification assumption, a theoretical analysis characterizes the domain-adversarial term for a normal-only target and the alignment state in which source fault features remain separated from target normal features. On a public run-to-failure bearing dataset, ADANN attains the highest mean F1-score among four transfer baselines, with a nominally significant precision gain over the strongest baseline, and its robustness is examined under synthetic noise.

Closest papers

Nearest neighbours by meaning across the whole index.

Generative multi-domain transfer learning for fault detection in data-scarce wind turbines

cs.LG ·2026-08-31 ·Stefan Jonas, Angela Meyer
code/data similarity 0.70
Abstract

Normal behavior models have shown promise for reliable fault detection in wind turbines. However, these unsupervised anomaly detection models require sufficient fault-free training data to learn the normal operation behavior of turbines. Under data scarcity, for example in newly deployed wind turbines, these models may result in poor fault detection performance. In this work, we propose a multi-domain generative domain mapping approach based on Star Generative Adversarial Networks (StarGAN) to improve fault detection on data-scarce wind turbines. Our model maps SCADA measurements from a data-scarce turbine to resemble those of several data-rich turbines. By preserving the operational state during translation, faults occurring in a data-scarce domain can be mapped and detected by reliable pre-trained normal behavior models of data-rich domains. Highlighting the benefits of an ensemble fusion strategy, we show that under severe data scarcity our method can produce anomaly scores comparable to models trained on large representative datasets. Our approach can consistently outperform models trained on scarce data when less than 2 weeks of training data are available. With just 2 weeks of accumulated training data, we achieve an anomaly score similarity that is, on average, +16% higher than conventional fine-tuning, and +10% higher than single-source domain mapping. As a step towards unsupervised model selection, we propose a proxy metric that detects poor performance at training time, despite an absence of anomalies. Our study presents the potential and challenges of multi-domain mapping for wind turbine fault detection under unrepresentative training data.

0.28

Deep Vision in Smart Manufacturing: MODERN Framework for Intelligent Quality Monitoring and Diagnosis

cs.LG stat.ML ·2026-08-14 ·Yicheng Kang, Yuling Jiao, Xin Geng, Mahesh Nagarajan
similarity 0.66
Abstract

Smart manufacturing processes are often installed with a large number of sensors, imaging devices and computers, which not only enable instant communication across various modules of a production system but also aid in intelligent manufacturing management. In this paper, we introduce MODERN, a deep learning framework for quality monitoring and fault isolation, which integrates these enhanced capabilities into the practice of industrial quality control. Using the architecture of an inception residual neural network, we develop a control chart that monitors the likelihood of a product containing defects. We also propose a faulty region estimator that identifies the defective area using transfer learning. To extend our framework to cases where there are not sufficient training data, we suggest a transfer monitoring technique that requires only a small sample size and a hypothesis testing approach for quantitatively assessing the applicability of our method. Theoretically, we establish the minimax optimal convergence rate for both our defect likelihood estimation and fault diagnosis. Our results lead to a seemingly counter-intuitive managerial implication - it may not always be in a manufacturer's best interests to keep upgrading its monitoring equipment regardless of the cost. Empirically, we demonstrate the superior performance of our method in comparison with a state-of-the-art approach using both simulated experiments and real data.

0.04

Fault Diagnosis of Dynamic Systems Under Unknown Operating Conditions: A Condition-Guided Selective Adaptation Approach

eess.SY ·2026-08-21 ·Jiaming Liu, Zeyi Liu, Hongshuo Zhao, Pengyu Han, Xiao He
similarity 0.63
Abstract

Fault diagnosis under unknown operating conditions remains challenging for dynamic industrial systems, as the distribution shift caused by changing operating conditions can significantly degrade the performance of diagnostic models in real-world applications. To address the problem, a condition-guided selective adaptation approach is proposed. Specifically, a novel continuous operating-condition adversarial learning strategy with progressive training is developed in the offline stage to enhance the generalization ability of the diagnostic model. During online deployment, residual operating-condition responses are exploited to identify reliable unlabeled samples from streaming data, which are then used to update the diagnostic model. Extensive experiments on real-world gearbox and motor datasets have demonstrated that the proposed framework outperforms state-of-the-art methods in diagnostic accuracy while maintaining relatively low test-time, showing its potential for practical industrial applications.

0.17

Transfer Learning for Evolving Domains

cs.LG stat.ML ·2026-09-11 ·Ricardo Ribeiro Pereira, Jacopo Bono, Hugo Ferreira, Pedro Ribeiro, Pedro Saleiro +2 more
positioncode/data similarity 0.60
Abstract · 24 pages, 2 figures, 2 tables

Transfer learning explores how to leverage knowledge from various tasks or domains (sources) to enhance predictive performance in related tasks or domains (targets). Typically, transfer learning research is segmented into several isolated sub-areas (such as domain generalisation, domain adaptation, or multi-domain learning), each making distinct assumptions about target data availability, namely how much data and how many labels are available at training time. However, in many real-world applications, data availability is not fixed but evolves over time, as instances and labels are progressively collected from a new domain. Each of the classical settings then describes only a snapshot of a trajectory that a deployed system must traverse in full. We formalise this trajectory as a transfer learning problem in its own right, Transfer Learning for Evolving Domains (TrED), specified by a data availability process fixed by the environment, a learning protocol that the method is free to choose, and an evaluation criterion that scores the whole trajectory of models rather than a single one. Within this formalism, the classical settings are recovered as regimes that a learner may pass through, rather than as separate problems that TrED concatenates. We then examine the transfer learning literature to identify mechanisms that are promising building blocks for a solution, and find that most methods are tailored to a single regime and that even the strongest existing candidates do not yet optimise the whole trajectory. We argue that TrED is a well-posed and unsolved problem, and an important direction for future research.

0.44

Safeguarding Mutual Correction in Source-Free Domain Adaptation via Cut Statistics

cs.AI ·2026-10-02 ·Seongjun Lee, Changhee Lee
top venue similarity 0.60
Abstract · Accepted at NeurIPS 2026

Source-Free Domain Adaptation (SFDA) aims to adapt a source-pretrained model to an unlabeled target domain without access to the original source domain. While early single-model approaches rely on self-refinement, they are inherently susceptible to confirmation bias and struggle to correct their own systematic errors. To overcome this limitation, recent methods introduce Vision-Language (ViL) models as external knowledge sources. However, these approaches operate in a largely unidirectional paradigm, using the ViL model primarily to supervise the source-pretrained model. This overlooks a key structural property: the two models exhibit distinct failure modes -- where one produces an incorrect prediction, the other may produce a correct one, creating a natural opportunity for mutual correction within the target domain. Yet, without ground-truth labels, identifying which model is correct on any given sample is non-trivial, and naively exchanging predictions risks propagating errors across models. To address this challenge, we propose SafeCut, a novel approach that leverages the cut statistic as a label-free measure of prediction reliability to gate cross-model supervision. Our approach dynamically controls both the direction and strength of supervision based on relative reliability, selectively amplifying true corrections while suppressing miscorrections on a per-sample basis. We further provide theoretical justification showing that this reliability-gated mechanism guarantees a net-positive correction signal. Extensive experiments across diverse SFDA benchmarks demonstrate that SafeCut achieves state-of-the-art performance, highlighting the effectiveness of safeguarding mutual correction in SFDA via cut statistics.

0.37

Cross-Scenario Industrial Defect Detection via Domain-Robust Training and Metric-Aligned Selection

cs.CV ·2026-10-14 ·Dikai Li, Weijia Wang, Yuan-Gen Wang
top venuecode/data similarity 0.60
Abstract · This paper has been accepted for presentation in IEEE ICME 2026

Automated defect detection of industrial boards must remain highly reliable under cross-scenario variations in lighting, surface contaminants, and production line conditions. This makes cross-scenario defect detection a domain generalization problem, wherein models are required to detect, localize, and classify defects across unseen scenarios while minimizing false alarms on clean boards. For the IDA 2026 Track 1 challenge, we propose a cross-scenario defect detection method that includes four complementary modules: cross-scenario robust training, small-defect-aware learning, score calibration and inference threshold selection, and metric-aligned checkpoint selection. These four modules respectively introduce cross-scenario robust normalization and DSU-style statistic perturbation with progressive random convolution, NWD and parameter-free spatial attention, the VFL learning objective, and a custom SWAD variant driven by the Track 1-oriented proxy. Experimental results demonstrate that our model achieves a Track 1 score of 0.564 with a screening score of 0.696 on the test dataset on a single RTX 4090 GPU. The code is available at https://github.com/GZHU-DVL/Dikai.

0.40

DAAF: From Failure Localization to Editable System Assets in LLM Agents

cs.AI ·2026-09-26 ·Xiaoyang Yuan, Qi Liu, Yubin Ruan, Xinyi Mou, Zhuomeng Zhang +7 more
similarity 0.60
Abstract · 21 pages, 1 figure. Preprint

Deployed LLM agents increasingly rely on persistent, versioned system assets such as routing rules, knowledge segments, prompt instructions, and reusable skills. Failure-localization methods can identify where an error manifests in an agent or execution trace, but repair requires a different decision: which editable system asset should be changed, and is that change expected to improve the task outcome? We study this gap through component-attribute failure attribution, where diagnosis targets versioned, addressable items rather than execution locations. We propose the Detection-Aware Attribution Framework (DAAF), which learns the effects of valid attribute replacements and amortizes this intervention evidence into deployment-time diagnosis. DAAF combines sparse and noisy failure signals to decide whether intervention is warranted, learns component-type-conditioned replacement effects from controlled replays evaluated by executable task outcomes, and shares supervision across requests with compatible intervention responses. At diagnosis time, DAAF uses only the observed execution, registered candidates, and available failure signals; it requires neither counterfactual replay nor task reward and returns no_change, a repair target, or an unresolved decision when evidence is insufficient. On held-out tau^2-bench Telecom tasks, DAAF achieves 80.72% attribute Hit@1, recovers 62.65% of failed executions while limiting clean-task regression to 3.23%, and reaches 71.93% overall task success. These results show that intervention-grounded attribute attribution can connect failure localization to executable system repair.

0.53

DEDCA: Test-Time Adaptation for Generalized AI-Generated Image Detection

cs.CV ·2026-11-12 ·Hao Tan, Qimin Zhang, Lihuang Fang, Kebing Jin, Jinghui Qin
benchmark similarity 0.59
Abstract

AI-generated image detectors face significant challenges when deployed in real-world environments, particularly when test samples are produced by unseen generators that deviate from the source training distribution. Existing detectors often rely on a single type of evidence, such as semantic representations or low-level generation traces, making them vulnerable when the corresponding cue becomes unreliable. Moreover, adapting detectors to newly emerging generators usually requires target labels or retraining, which is costly and impractical. To address these challenges, we propose Dual-Evidence Disagreement-Constrained Adaptation (DEDCA), a test-time adaptation framework for generalized AI-generated image detection. DEDCA constructs a dual-evidence detector by combining CLIP-based semantic evidence with trace evidence extracted from shuffled entropy and residual statistics, and introduces a reliability-aware gate to perform sample-specific adaptive fusion. Our key idea is to exploit the disagreement between the two evidence streams as an unlabeled adaptation signal, enabling the detector to adjust to target-domain shifts without relying on target labels or blindly trusting a single prediction stream. Experiments show that DEDCA achieves superior performance on the GenImage benchmark by outperforming state-of-the-art AI-generated image detectors and test-time adaptation methods with 92.0\% average accuracy.

0.12