CS Paper Radar

Constrained Koopman Control Parametrization: Convex Controller Synthesis for Tracking under Input Constraints

Taha Ondogan, Ran Jing, Andrew P. Sabelhaus, Roberto Tron

eess.SY ·submitted 2026-10-21 16:27 UTC · v1

Abstract

Koopman operator theory represents nonlinear systems with linear and bilinear terms in the state and input observables, greatly simplifying control design. However, incorporating input constraints into Koopman-based controller synthesis remains challenging, limiting their applicability to constrained control tasks such as tracking. This paper develops a constrained Koopman Control Parametrization (cKoCoP) framework for synthesizing state-feedback controllers that satisfy prescribed input constraints with Lyapunov-certified stability of the identified lifted closed loop. The cKoCoP offers nonlinear state-feedback via linear-in-observables feedback, enabling linear controller design. The proposed controller is obtained through convex optimization: we incorporate ellipsoidal or polytopic input constraints with the S-procedure or Farkas-lemma-based conditions. We also introduce a Control Lyapunov Function (CLF) for trajectory tracking which incorporates input constraints. The approach is validated on two canonical nonlinear systems, a double pendulum and a unicycle, demonstrating data-driven tracking while respecting input constraints. Experiments validate the method's robustness to measurement noise, and runtime improvements over Koopman Model Predictive Control (KMPC) baselines. The results demonstrate that cKoCoP achieves competitive tracking performance with substantially reduced online computational cost, supporting its potential for real-time constrained tracking applications.

Comment
16 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Behavioral approach to Constrained Linear Quadratic Control: Feasibility and Optimality

eess.SY math.OC ·2026-10-29 ·Soutrik Bandyopadhyay, Debasattam Pal, Shubhendu Bhasin
published similarity 0.64
Abstract · Accepted for publication at IEEE Indian Control Conference 2027

This paper develops a constrained linear-quadratic (LQ) optimal control framework within the behavioral approach. Unlike classical formulations that rely on state-input representations, our method treats both the system dynamics and the constraints as trajectory-level objects. The system is modeled through a kernel representation, while inequality constraints are captured using behavioral inequalities defined over infinite-dimensional convex cones. Using quadratic differential forms (QDFs) to encode performance indices, we formulate the constrained LQ problem as a convex variational optimization over trajectories. By employing Gateaux differentials, we derive the stationarity and complementarity conditions and show that they admit a representation as an augmented behavioral system whose unique decomposition into autonomous and controllable sub-behaviors yields a complete parameterization of all optimal constrained trajectories. The resulting conditions constitute a behavioral analogue of the Karush-Kuhn-Tucker (KKT) framework. A numerical example illustrates the effect of inequality constraints on the optimal behavior. The framework provides a general, trajectory-level representation for constrained optimal control and opens avenues for closed-loop and data-driven extensions.

0.41

Control of Linear Dynamical Systems with Operational Constraints

eess.SY ·2026-11-06 ·Marcel Menner, Eugene Lavretsky
theory similarity 0.61
Abstract

This paper presents a method for designing servo-controllers that enforce operational constraints on multi-input multi-output linear time-invariant dynamical systems. The proposed method introduces a control augmentation that complements a baseline controller to ensure forward invariance of state/output trajectories within prescribed box constraints. The derivations of the control design are based on the Nagumo Theorem, the Comparison Lemma, and principles from min-norm optimal control akin to the theory of Control Barrier Functions. Importantly, an explicit piecewise-linear feedback control law is derived, which provides continuous enforcement of constraints without online optimization, enabling rigorous stability and robustness analysis via classical linear systems theory. Extensions to handle estimation errors in output feedback and integral action in proportional-integral control are provided. Theoretical results are validated through flight control simulation studies that demonstrate input/output constraint satisfaction, robustness to disturbances, and closed-loop stability. The proposed method offers a mathematically rigorous, practical, and analyzable alternative to common heuristic or optimization-intensive constrained control strategies.

0.22

Port-Hamiltonian Koopman Operator Synthesis for Mechanical Systems

cs.RO eess.SY ·2026-09-15 ·Rajpal Singh, Aditya Singh, Jishnu Keshavan
similarity 0.60
Abstract

Finite-dimensional Koopman models enable efficient linear prediction and control of nonlinear robotic systems. However, models learned purely from trajectory data may violate the energetic structure of the underlying mechanics, producing predictions that exhibit artificial energy growth and diverge under recursive propagation. This work presents a structure-preserving Koopman framework for Euler-Lagrange systems built on generalized-momentum coordinates. The momentum transformation exposes the mechanical actuation as a known, state-independent port, which is preserved explicitly in the lifted dynamics. A structure-constrained neural architecture is developed to jointly learn the lifting functions and a port-Hamiltonian Koopman generator, rendering the learned dynamics passive by construction rather than through penalty terms or post-hoc projection. A Cayley-midpoint discretization further preserves the corresponding storage-dissipation balance exactly in discrete time. These properties are established analytically by deriving the discrete storage balance and associated stability guarantees of the learned predictor. Simulation and experimental studies demonstrate improved prediction accuracy, data efficiency, and closed-loop tracking over Koopman baselines, with increasing gains for higher-dimensional systems.

0.23

Policy-Conditioned Koopman Representations for Parameterized Closed-Loop Systems

eess.SY ·2026-11-13 ·Kiran G. Krishnan, Shankar A. Deka
similarity 0.60
Abstract

Predicting the response of a nonlinear system across different feedback controllers requires a model that captures how the closed-loop dynamics change with the controller parameters. In a finite-dimensional Koopman model, these changes may affect both the latent dynamics and the observable coordinates used to represent them. In this paper, we propose a policy-conditioned Koopman representation framework to address this problem. This framework allows a single learned model to predict a family of closed-loop trajectories without retraining for each controller. We test the framework on four nonlinear prediction benchmarks, where the model stays below a 15% error threshold on every system, while each baseline exceeds it on at least one. As an example application, the resulting surrogate supports one-shot feedback-parameter selection: an optimization at the initial state selects a controller that then operates with fixed parameters and ongoing state feedback. On nonlinear control benchmarks including MuJoCo, the selected controllers stabilize every system with 3 to 97 times less online computation than nonlinear model predictive control. These results demonstrate how policy-dependent coordinates can support both prediction across closed-loop systems and controller selection without repeated online trajectory optimization.

0.15

Koopman--Lyapunov and Koopman--Riccati Controller Synthesis

eess.SY math.OC ·2026-10-30 ·Wentao Tang
similarity 0.60
Abstract · 56 pages, 9 figure, 5 tables

While the Koopman operator-based lifted representations of nonlinear autonomous and controlled systems have been well covered in the literature, the direct controller synthesis problem largely remains open. As the controlled system is generally a bilinear (instead of fully linear) Koopman model, controller synthesis appears to lose the linear--quadratic structures of the classical Lyapunov and Riccati methods for finite-dimensional linear systems. However, in infinite dimensions, bilinearity in the feature map should be merely artifactual and hence reducible to linearity in principle. In this work, by considering the operator semigroups in the reproducing kernel Hilbert space with a linear--Sobolev kernel and utilizing the Yosida approximation of their generators, the synthesis problems of a stabilizing controller and an input-unconstrained optimal controller can be formulated as an operator Lyapunov inequality and an operator Riccati equation, respectively. These formulations recover the desirable linear--quadratic structures, and hence, with sample data, they are solvable efficiently in analogous ways to usual linear systems by semidefinite programming solvers and Kleinman iterations, respectively. In addition to proving control performance bounds dependent on the sampling denseness and Yosida regularization, through numerical comparison to linearized LQR, bilinear EDMD-based synthesis, nonlinear MPC, and Koopman MPC methods on numerical models and process control examples, this work demonstrates the proposed Koopman--Riccati synthesis as a computationally efficient approach to obtain a near-optimal state-feedback control law.

0.31

Globally Certified Invariant-Ellipsoid Control from Data

eess.SY ·2026-09-30 ·Ngoc Tuan Dinh, Egor Dogadin, Alexey Peregudin
theory similarity 0.60
Abstract · 6 pages, 2 figures. Submitted jointly to IEEE Control Systems Letters (L-CSS) and the American Control Conference (ACC)

This letter develops a data-based method for designing state feedback for a discrete-time linear system under bounded disturbances. For each admissible feedback gain and scalar design parameter, a Lyapunov equation determines an invariant ellipsoid: a region that the state cannot leave under the permitted disturbances. We optimise the gain and parameter to minimise a trace-based measure of the resulting output enclosure. At each parameter value, value iteration gives a lower cost bound, while separate controller evaluation gives an achievable upper bound. These bounds also let us assess whole parameter intervals without evaluating every point. We prove that the search stops after finitely many evaluations with a stabilising state-feedback gain whose objective is within any prescribed absolute tolerance of the infimum over the chosen ellipsoid family. Neither an initially stabilising gain nor attainment of the infimum is assumed. The guarantee assumes exact arithmetic and a sufficiently informative batch of exact measurements, including disturbances during data collection; the resulting feedback uses only the state. A position--velocity example illustrates the bounds, controller checks, and computational cost.

0.32

Continuous-Time Critic as a Lyapunov Function: Projected Adaptation and Cart-Pole Stabilization

eess.SY math.DSmath.OC ·2026-10-07 ·Pavel Osinenko
theory similarity 0.59
Abstract

We study adaptive stabilization of known control-affine systems by treating the current parameterized critic itself as a Lyapunov candidate. Its total derivative contains a parameter-velocity term that can compensate unfavorable state evolution. A projection onto the intersection of a bounded admissible velocity set and one decay halfspace enforces parameter invariance and Lyapunov decrease simultaneously. We give an exact pointwise feasibility test, a conditional state-stability theorem, and a counterexample showing why a positive critic family containing a stabilizing member does not imply persistent feasibility. A convex endpoint constraint provides a distinct sampled implementation. A generic periodic polynomial-factor critic with a local Riccati anchor is evaluated on a force-limited cart-pole without mechanical-energy features, replay training, waypoints, or controller switching. The frozen controller passes stabilization and numerical decay checks on 600 sampled initial states across two draw sets; 400 matched continuous trajectories also pass. Independent reintegration audits and a conservative local feasibility certificate are distinguished from a global or machine-arithmetic guarantee. Compared with nonlinear model-predictive control, the measured implementation uses less CPU but has higher cost, settling time, and cart travel. The results support a conditional adaptive stabilization mechanism.

0.26

Physics-based Online Adaptive Koopman Model Predictive Attitude Control for Combined Spacecraft with Dynamic Uncertainties

eess.SY ·2026-09-02 ·Yicheng Sun, Yueyong Lyu, Yuhan Liu, Yanning Guo, Wei Pan
top venue similarity 0.58
Abstract · 16 pages, 13 figures, 3 tables

This paper proposes a physics-based adaptive Koopman Model Predictive Control (MPC) strategy for combined spacecraft attitude stabilization under inertia uncertainties and active target maneuverability. A novel, quaternion-based Koopman model is constructed from a set of analytical lifting functions derived from the quaternion kinematics, which provides a more compact and physically interpretable linear representation of the nonlinear dynamics compared with the conventional black-box EDMD and higher-dimensional DCM-based model. Leveraging the linear structure of this nominal model, a gradient descent-based update law is employed to efficiently identify time-varying inertial uncertainties from real-time input/output data. By integrating this adaptive linear model into the MPC framework, the optimal control problem reduces to a computationally efficient Quadratic Program (QP), thereby significantly lowering the online computational burden compared to nonlinear adaptive MPC. Recursive feasibility and regional input-to-state stability are formally established through the design of terminal ingredients for the MPC. The effectiveness and superiority of the proposed strategy are validated through comparative simulations of an attitude stabilization task for combined spacecraft in a high-fidelity 3D simulator.

0.48