CS Paper Radar

Control of Linear Dynamical Systems with Operational Constraints

Marcel Menner, Eugene Lavretsky

eess.SY ·submitted 2026-11-06 21:00 UTC · v1
theory

Abstract

This paper presents a method for designing servo-controllers that enforce operational constraints on multi-input multi-output linear time-invariant dynamical systems. The proposed method introduces a control augmentation that complements a baseline controller to ensure forward invariance of state/output trajectories within prescribed box constraints. The derivations of the control design are based on the Nagumo Theorem, the Comparison Lemma, and principles from min-norm optimal control akin to the theory of Control Barrier Functions. Importantly, an explicit piecewise-linear feedback control law is derived, which provides continuous enforcement of constraints without online optimization, enabling rigorous stability and robustness analysis via classical linear systems theory. Extensions to handle estimation errors in output feedback and integral action in proportional-integral control are provided. Theoretical results are validated through flight control simulation studies that demonstrate input/output constraint satisfaction, robustness to disturbances, and closed-loop stability. The proposed method offers a mathematically rigorous, practical, and analyzable alternative to common heuristic or optimization-intensive constrained control strategies.

Closest papers

Nearest neighbours by meaning across the whole index.

Feasibility of Simultaneous Input-Output Constraints for Tracking in a Class of LTI Systems: Part I

eess.SY ·2026-10-01 ·Junhyeok Yoon, Heather Hussain, Anuradha M. Annaswamy
similarity 0.65
Abstract · 14 pages, submitted to ACC 2027; v2: revised abstract, added the arXiv number of the companion paper (Part II, arXiv:2610.04742)

This paper addresses simultaneous input and output constraint satisfaction for a class of multi-input linear time-invariant systems with state feedback and integral action. A control barrier function (CBF)-based governor modifies the reference command while preserving the nominal feedback controller. Necessary and sufficient conditions are derived under which the governor is feasible at every state of a prescribed operating set and ensures simultaneous input and output constraint satisfaction, forward invariance, and bounded closed-loop solutions. The paper also shows that these conditions need not be met for certain choices of the CBF governor parameters due to conflicts between input and output constraints. A systematic design procedure is proposed that first searches for feasible free parameters and, if necessary, proposes a relaxation in the input constraint that restores feasibility. A companion paper provides numerical examples and counterexamples illustrating these results.

0.38

Admissibility-Preserving Control for Multi-Input Systems with Joint Capacity Constraints

eess.SY cs.ROmath.DSmath.OC ·2026-09-30 ·Saurabh Kumar, Lohitvel Gopikannan, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.63
Abstract

This paper addresses the control of multi-input strict-feedback nonlinear systems subject to a joint capacity constraint, in which the admissible input set is a coupled subset of the individual actuator limits. Unlike existing constraint-handling methods that enforce actuator bounds channel by channel and may unnecessarily suppress admissible control directions, we develop an Anisotropic Joint-Admissibility-Preserving Input Realization (AJ-APIR) framework that explicitly exploits the geometry of the joint constraint. The proposed realization constructs a state-dependent gain matrix whose spectral decomposition separates the commanded input into normal and tangential directions relative to the constraint boundary. The normal component is attenuated as the boundary is approached, while the tangential component is preserved, which allows the admissible control effort to be redistributed without loss of tracking authority. Integrated with a backstepping controller, the AJ-APIR framework guarantees forward invariance of the joint admissible set for all time. We establish exponential convergence of the tracking error to zero together with uniform boundedness of all closed-loop signals, and characterize the resulting command-demand behavior under the joint constraint. Simulation results for a representative second-order, two-input nonlinear system subject to a power-budget constraint demonstrate the efficacy of the proposed method to enforce the joint input constraint.

0.30

Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization

cs.RO eess.SYmath.OC ·2026-11-01 ·Hamza Tariq, Adeel Akhtar
code/data similarity 0.61
Abstract · 8 pages, 3 Figures

This paper studies dual path following for a quadrotor carrying a three-degree-of-freedom arm. The center of mass of the combined system must follow a vehicle path and the end effector must follow a second path, while the arm respects its joint limits and avoids its singular postures. The vehicle and the arm are mechanically coupled, so one controller must handle both paths. With the center of mass and the end-effector path coordinates as outputs, and a dynamic extension of the thrust, the system admits a normal form without internal dynamics. We characterize the states where this normal form fails. We formulate the transverse feedback linearizing controller as a quadratic program that relaxes only the speed of the end effector along its path and imposes safety and actuator limits as inequality constraints. The program reduces to a scalar problem with a closed-form solution. If it remains strictly feasible for all time, the feedback is locally Lipschitz, both paths are invariant and attractive, and every constraint holds. In the physics engine Drake, the controller resolves a conflict between the two speed references by slowing the end effector while both paths remain invariant. By contrast, a cascade with a safety filter leaves both paths. Code and animations are available at https://gradslab.github.io/am_dual_pf-/

0.22

Constrained Koopman Control Parametrization: Convex Controller Synthesis for Tracking under Input Constraints

eess.SY ·2026-10-21 ·Taha Ondogan, Ran Jing, Andrew P. Sabelhaus, Roberto Tron
similarity 0.61
Abstract · 16 pages, 8 figures

Koopman operator theory represents nonlinear systems with linear and bilinear terms in the state and input observables, greatly simplifying control design. However, incorporating input constraints into Koopman-based controller synthesis remains challenging, limiting their applicability to constrained control tasks such as tracking. This paper develops a constrained Koopman Control Parametrization (cKoCoP) framework for synthesizing state-feedback controllers that satisfy prescribed input constraints with Lyapunov-certified stability of the identified lifted closed loop. The cKoCoP offers nonlinear state-feedback via linear-in-observables feedback, enabling linear controller design. The proposed controller is obtained through convex optimization: we incorporate ellipsoidal or polytopic input constraints with the S-procedure or Farkas-lemma-based conditions. We also introduce a Control Lyapunov Function (CLF) for trajectory tracking which incorporates input constraints. The approach is validated on two canonical nonlinear systems, a double pendulum and a unicycle, demonstrating data-driven tracking while respecting input constraints. Experiments validate the method's robustness to measurement noise, and runtime improvements over Koopman Model Predictive Control (KMPC) baselines. The results demonstrate that cKoCoP achieves competitive tracking performance with substantially reduced online computational cost, supporting its potential for real-time constrained tracking applications.

0.25

Safe Receding-Horizon Control of Fixed-Wing Aircraft Using Constrained Approximate Dynamic Programming

eess.SY ·2026-10-05 ·Felipe Arenas-Uribe, Ricardo Gutierrez, Jesse B. Hoagg
similarity 0.58
Abstract

We present a receding-horizon optimal control for fixed-wing aircraft subject to state constraints. These constraints include operational constraints such as altitude, geofencing, and obstacle avoidance, as well as bounds on flight-path angle, roll angle, and airspeed. The state constraints are composed into a single soft-minimum control barrier function (CBF). We use this composite CBF in a constrained-approximate dynamic program to obtain a sequence of analytic closed-form control functions that approximately minimize a quadratic finite-horizon integral cost subject to the CBF constraint. The resulting receding-horizon control is non-myopic in the sense that it approximately optimizes the integral cost while satisfying the state constraint at all times along the entire prediction horizon. We demonstrate constraint satisfaction and performance in simulations of a fixed-wing aircraft navigating an obstacle-filled airspace under wind uncertainty. We also compare this receding-horizon control with 2 other methods.

0.14

Safe Position and Attitude Control for Landing on Small Celestial Bodies with Gravitational Uncertainty

eess.SY math.OC ·2026-10-03 ·Felipe Arenas-Uribe, T. Michael Seigler, Jesse B. Hoagg
theory similarity 0.56
Abstract

Landing on small celestial bodies is challenging because the spacecraft must satisfy safety and actuator constraints despite gravitational forces that are difficult to model accurately. This article presents an optimal control for safe landing with gravitational uncertainty and strict actuator limits. The approach addresses spacecraft pose control with attitude represented on SO(3), where there are actuator constraints and state constraints on position, attitude, velocity, and angular velocity. The approach combines several key techniques. First, the gravitational force uncertainty is estimated using an extended high-gain observer, and we present a new dynamic upper bound on the estimation error. This gravitational estimate and dynamic bound are then used to compute optimal control forces and torques that satisfy state and actuator constraints while tracking a landing trajectory. Optimal forces and torques are obtained from the closed-form solution to a quadratic program that has a single control barrier function constraint constructed by composing multiple control barrier functions that are designed to enforce each state and actuator constraint. Finally, an optimal allocation maps control forces and torques to actuator commands that satisfy actuator constraints. The method is demonstrated in simulation using 2 vehicle configurations with severe gravitational uncertainty.

0.21

Robust Safe Control Under Uncertainty: Estimation, Contraction, and Regret Bounds

eess.SY math.OC ·2026-11-11 ·Changrui Liu, Liang Wu, Anil Alan, Shengling Shi, Bart De Schutter
similarity 0.56
Abstract · 15 pages, temporary, (optional) simulation to be added

Disturbance uncertainty requires safety filters based on control barrier functions (CBFs) to leave a robustness margin, which can alter the nominal control input and degrade closed-loop performance. This paper studies safety and the resulting performance loss for discrete-time nonlinear systems with additive disturbances and polytopic input constraints. We develop a causal disturbance observer and construct two robust barrier conditions. The first uses a time-dependent bound on the estimation error. The second uses a constant margin when the disturbance increments are uniformly bounded and moves the requirement on the initial error from the online filter to an explicit initialization condition. For affine barriers, both filters are quadratic programs. We bound their input deviations from an oracle filter with access to the current disturbance and derive sufficient conditions for uniform contraction of the oracle closed loop. The contraction analysis accounts for state-dependent actuation, unmatched disturbances, and active physical input limits. Combining the sensitivity and contraction estimates gives finite-time dynamic regret bounds that quantify the effects of observer convergence, disturbance variation, and robustness margins. With sublinear cumulative certified disturbance variation and observer innovation error, the bounds yield sublinear regret.

0.27

Real-Time Reference Shaping for Servo Systems

eess.SY ·2026-08-31 ·Zehui Lu, Yebin Wang, Go Sato, Fujita Tomoya
similarity 0.56
Abstract

This paper addresses real-time motion planning for servo systems subject to nonlinear, state-dependent actuator constraints. A reference reshaping method is proposed that combines analytical optimality with high computational efficiency. Using Karush-Kuhn-Tucker conditions, the problem structure is explicitly characterized, and it is shown that the optimal solution lies within a finite set of candidate points. The complete solution set is constructed via closed-form expressions and a small-scale eigenvalue problem, yielding a deterministic algorithm that recovers the exact optimal solution without iterative optimization or root-finding. To address kinematic mismatch induced by aggressive commands, a real-time trajectory compensator is introduced to correct accumulated position error while preserving feasibility. Simulation results demonstrate significant computational speed improvements over existing methods, enabling real-time implementation at frequencies approaching 100 kHz.

0.24