CS Paper Radar

Energy and Latency First: How Deployment Constraints Reverse Time-Series Model Selection

Shruti Bothe, Illyyne Saffar, Ayush K. Varshney

cs.LG ·submitted 2026-10-22 09:10 UTC · v1
publishedbenchmark

Abstract

AI models, and time-series models in particular are typically ranked by accuracy and deployed under constraints absent from that ranking. In this paper, we study a real setting where these constraints are explicit and measurable: handover pre- diction in cellular networks, where inference runs on the User Equipment once per 40 ms measurement period and must complete before the network acts. The timing bound is hard: a late prediction is superseded by the measurement it was predicting, while energy is a cumulative budget spent for the life of the device. Neither appears in the objective these models are selected on. We evaluate eight architectures under a protocol that screens for deadline feasibility at the tail rather than the mean, then ranks the feasible models on measured inference energy, count- ing the feature computation that precedes the forward pass and is usually omitted. Gradient-boosted trees on handcrafted temporal features are the most accurate model (F1=0.974) and among the cheapest to run, while the neural architecture an accuracy-only benchmark would rank first (CNN-1D, F1=0.914) costs over 3 times more energy per inference under a realistic duty-cycled deployment pattern. We give three conditions under which this outcome should be expected, so the finding applies beyond telecommunications. Accuracy-only benchmarking does not merely under-report deployment cost. It can rank first a model that cannot be deployed.

Comment
13 pages, 1 figure
Journal ref
40th Conference on Neural Information Processing Systems (NeurIPS 2026) Workshop: Generalization for Time Series in Tight Settings: Latency, Inference, Memory, Privacy, and Sustainability (TS-LIMITS)

Closest papers

Nearest neighbours by meaning across the whole index.

CARB: A Characterization-Guided Framework for CNN Inference Cost Prediction and Deployment Screening

cs.AR cs.LGcs.PF ·2026-08-11 ·Linh Nguyen, Zhixin Pan
similarity 0.65
Abstract

Accurate pre-deployment estimation of CNN inference cost--energy, latency, and peak memory--is increasingly critical as models are deployed on resource-constrained GPU platforms. Existing approaches rely on FLOPs, latency measurements, or single-device profiling as energy proxies, overlooking the non-linear interactions between architectural design and hardware load. We present a workload characterization study of 13 419 CNN configurations on two GPU platforms (RTX 5090 and RTX 3080) under GPU telemetry, revealing that energy, latency, and memory exhibit fundamentally distinct scaling behaviors: energy and latency diverge by 3x under high computational demand, and cross-GPU transferability differs by target--energy and latency require platform-specific models while memory transfers well across the two tested platforms. Building on these characterization findings, we develop CARB, a cascade-blended ensemble that jointly predicts all three targets with R2 ~0.99, and a two-stage deployment screening workflow that eliminates over 90% of candidates in seconds, reducing large design spaces to a Pareto-prioritized shortlist validated against real hardware.

0.04

Network-Aware Forecasting on Wireless Access Points

cs.NI cs.LG ·2026-09-02 ·Niloo Bahadori, Swadhin Pradhan, Peiman Amini
similarity 0.63
Abstract · 5 pages, 2 figures, 1 table

Enterprise wireless access points (APs) are promising platforms for predictive machine learning (ML), but their primary responsibility remains providing wireless connectivity and network services. Predictive inference must therefore share an AP's CPU and memory with packet processing, Wi-Fi and IoT radio operations, and client management. This resource contention creates two risks: a model that performs well on proxy hardware may be too slow on the target AP, while a model that fits in isolation may still degrade network services under load. We define \textit{network-aware deployability} using two gates: qualification of the model and its execution path on the target AP, followed by validation of its execution profile under packet-service and forecasting constraints. Our benchmarks show that edge testbeds do not reliably capture target behavior. Across matched artifacts and serving settings, five model implementations run 6.1--19.1$\times$ slower on an AP than on a Raspberry Pi~5, while peak memory usage differs by up to 22\%. Moreover, two forecasting foundation models of similar size differ in AP latency by 19$\times$. When serving a smaller model across 13 parallel streams at a 30~s cadence under network saturation, default execution increases p99 round-trip time (RTT) by 76\% and reduces throughput by 7.06\%. Understanding these trade-offs is essential for live deployment if we aim to use APs for both networking and ML workloads.

0.28

SeqMoE: Toward Full-Load Performance via Predictive and Graph-Compatible MoE Offloading

cs.OS cs.AI ·2026-09-11 ·Zihan Wang, Yuqi Wang, Lei Gong, Cheng Tang, Wenqi Lou +3 more
similarity 0.63
Abstract

Mixture-of-Experts (MoE) creates a structural advantage for offloading: only a small fraction of activated experts need to reside in device memory, and if they can be loaded in time for computation, offloading can in principle approach full-load performance, where all model weights reside in device memory. Yet translating MoE's structural advantage into practical offloading gains remains challenging. We propose SeqMoE to bridge this gap. To maximize expert hits, we build predictive memory management: (i) Sequence-to-sequence prediction. We are the first to recast expert activation prediction as sequence modeling, enabling accurate multi-step, multi-layer forecasts that provide a long and reliable window for downstream decisions. (ii) Joint prefetch scheduling. We formulate prefetch scheduling as Job Sequencing with Deadlines to maximize expected expert hits and improve bandwidth efficiency. (iii) Forecast-driven caching. Leveraging the recursive nature of sequence modeling, we introduce a probabilistic Belady policy for future-aware eviction. To eliminate execution bottleneck, we develop (iv) Graph-compatible offloading runtime. We derive general runtime principles encompassing compute-transparent expert placement and synchronization-free orchestration disciplines for end-to-end graph capture. With 45% expert residency, SeqMoE averages a 96.97% hit rate and 80.22% of full-load performance, advancing the state of the art in MoE offloading.

0.42

Closing the Loop: Continuous Measurement-Driven Refinement of Offloading Predictions

cs.SE ·2026-09-24 ·Falk Dettinger, Matthias Weiß, Michael Weyrich
similarity 0.62
Abstract · computation offloading, measurement-driven feedback, multi-metric prediction

Modern vehicles increasingly offload computation- ally intensive perception and decision functions to backend servers, requiring accurate predictions of absolute performance metrics such as Round-Trip Time (RTT), processing time, and utilization. In practice, strong temporal variability, heterogeneous backend hardware, and multimodal latency regimes cause offline- trained predictors to drift, creating a reliability gap for latency- sensitive functions. We address this gap with an operational, measurement-driven closed loop that continuously recalibrates absolute-value predictors during runtime. The system aligns real execution measurements with predicted values and performs incremental online updates of a lightweight multi-head neural network while preserving model stability. The model implicitly learns the broad, non-Gaussian spread of input metrics, and a sigma-based error analysis in our evaluation characterizes resid- ual variability under dynamic conditions. Experiments across two Kubernetes clusters show that continuous measurement- driven refinement reduces prediction drift, improves accuracy for RTT, processing time, and utilization, and stabilizes prediction behavior across heterogeneous latency regimes. However, the broad and multimodal distribution of input metrics imposes fundamental limits on absolute-value prediction, with residual errors frequently exceeding configured thresholds. Overall, online calibration proves feasible and necessary for robust computation offloading in dynamic vehicular edge environments, while high- lighting the need for future mechanisms that address extreme latency regimes and high-variance operating conditions.

0.28

An Empirical Benchmark of Deep Time-Series Models for Smart Meter Energy Forecasting

cs.LG ·2026-08-19 ·Behnaz Kavoosighafi, Maria Eidenskog, Wiktoria Glad, Katerina Vrotsou
publishedbenchmarkcode/data similarity 0.61
Abstract

Accurate forecasting of energy consumption is important for the efficient operation of power systems, with direct implications for operational costs, energy management, and system maintenance. Due to the availability of extensive high-resolution consumption data from smart meters, data-driven methods have been used for short-term and long-term forecasting. However, their comparative performance on real-world smart meter data is still not well studied. In this paper, we present an empirical benchmark of nine modern deep learning models for time-series forecasting, including linear, MLP-based, convolutional, and Transformer architectures. We evaluate these models on two publicly available smart meter datasets. Our analysis focuses on three factors that strongly affect forecasting performance: the length of historical input, the prediction horizon, and the choice of model architecture. We show that extending the historical context improves accuracy, but only up to a saturation point, after which additional input provides limited benefit. In contrast, accuracy decreases as the prediction horizon increases. We also investigate the trade-off between prediction accuracy and computational complexity, and assess the statistical significance and practical magnitude of performance differences across models. Our results show that deep learning models consistently outperform classical baselines, while lightweight architectures achieve relatively similar performance at significantly lower computational cost. Additionally, architectural differences only become meaningful at longer forecasting horizons and on more heterogeneous datasets. Finally, a subgroup analysis across geodemographic and household categories shows that model choice has limited impact for most population segments.

0.59

Joint Optimization of Memory and Computing Frequency for Energy-Efficient DNN Inference

cs.AI ·2026-08-14 ·Yunchu Han, Zhaojun Nan, Sheng Zhou, Zhisheng Niu
published similarity 0.60
Abstract

Deep neural network (DNN) inference on mobile devices often incurs high latency and energy consumption due to limited computing and memory resources. To enable energy-efficient DNN inference, most existing studies focus on dynamic voltage and frequency scaling (DVFS) for adjusting the computing frequency, while the impact of memory frequency on the inference performance has been greatly overlooked. In this paper, we consider the impact of memory frequency and computing frequency on DNN inference time, and jointly optimize these two frequencies together with communication resources for energy-efficient DNN inference. Based on a realistic inference time model, we formulate an optimization problem to minimize the energy consumption of all mobile devices under the deadline constraint. For local inference, we derive a near-optimal closed-form solution via convex optimization, while an optimal closed-form solution for transmission power is obtained for edge inference with the given bandwidth. Furthermore, we propose a low-complexity heuristic algorithm to effectively solve the overall problem with polynomial time complexity. Simulation results based on measured data show that the proposed near-optimal solution for local inference can achieve optimal performance under strict deadline constraints, with a performance gap of up to 2.5% compared with the optimal solution. Meanwhile, our proposed algorithm significantly reduces the energy consumption of devices by up to 10.4% compared to other methods.

0.17

Node-wise Feature Encoding for Neural Performance Prediction

cs.LG ·2026-08-28 ·Matthew Grenier, William Hammer, Andrew Heuer, Nikhil Krishna, Yi Wang +1 more
similarity 0.59
Abstract · 22 pages, 7 figures

As neural networks are increasingly deployed on resource constrained edge devices, accurate prediction of latency and energy is critical for efficient neural architecture search. Existing GNN and transformer based predictors achieve strong results but largely ignore node-level computational cost, limiting their ability to model performance critical operations. To address this, we introduce FeatureFormer, a neural performance predictor that incorporates explicit node-wise encodings of FLOPs, parameter counts, and memory proxies within a gated graph attention architecture. We also present NNEQ, a new large-scale energy consumption dataset that enables unified evaluation of latency and energy prediction. Extensive experiments demonstrate that FeatureFormer achieves state-of-the-art performance across both metrics, including challenging out-of-domain settings. Finally, we show that the proposed encoding is broadly applicable and consistently improves existing predictors with negligible overhead.

0.13

PRISM: Predictive Runtime In-place Scaling and Model Selection for Edge Microservices

cs.DC ·2026-08-22 ·Uwe Gropengießer, Thomas Reuter, Dominik Schön, Osama Abboud, Xun Xiao +1 more
similarity 0.59
Abstract

Latency-sensitive edge AI services must balance strict deadlines, output quality, and limited compute and energy budgets. However, static CPU provisioning wastes resources because inference cost varies substantially across inputs, model variants, and runtime conditions. We present PRISM, a prediction-guided runtime framework that jointly selects model variants and CPU allocations for containerized edge microservices. Using container-level energy monitoring and lightweight regression models, PRISM adapts each pipeline stage in place and minimizes predicted CPU-package energy under deadline, resource, and offline model-level Quality of Result (QoR) constraints. We evaluate PRISM on more than 52,000 requests in an Automatic License Plate Recognition (ALPR) pipeline with detection and recognition stages. For detection, PRISM reduces energy consumption by 36 % compared to the strongest static configuration while preserving a comparable success rate and using less than half of the average CPU allocation. For recognition, it reaches near-static-best performance with lower average CPU allocation. These results show that predictive in-place adaptation is a practical mechanism for making time-sensitive AI microservice pipelines more energy-efficient at the edge.

0.12