CS Paper Radar

Whole-Body Motion Guided Reference Generation for Uncertainty-Aware Compliant Assistance

Muyuan Ma, Long Cheng, Lijun Han, Haotian Zhai, Xinpan Meng, Xiuze Xia, Houcheng Li, Zeyu Liu

cs.RO ·submitted 2026-10-22 14:01 UTC · v2

Abstract

Exoskeletons have shown great potential for augmenting human physical capabilities, yet generating reliable assistance remains challenging because human motion patterns and interaction requirements vary substantially in practice. To address this problem, a dual-loop assistance strategy is proposed to couple multimodal exoskeleton trajectory generation with variable admittance control, where trajectory variance links the outer-loop generator and the inner-loop controller. The generator synthesizes future exoskeleton trajectories through denoising, primarily using whole-body human motion and exoskeleton proprioception, with task descriptions as auxiliary semantic cues. To reduce cross-modal representation mismatch, a three-stage training pipeline is introduced to progressively optimize the human motion encoder, the exoskeleton proprioception encoder, and the trajectory generator. In the inner loop, multiple future trajectories are sampled from the generator to estimate the trajectory mean and variance. The mean is used as the control reference, while the variance provides an uncertainty measure for prediction reliability. This measure is further incorporated into a stiffness regulation law, enabling compliant assistance with input-to-state stability under bounded lumped interaction input. Experimental results demonstrate that the proposed method significantly reduces muscle activation levels compared with standard baselines, while also decreasing users' metabolic energy expenditure relative to the unassisted condition.

Comment
Withdrawal requested because not all co-authors had consented to the submission of this manuscript to arXiv

Closest papers

Nearest neighbours by meaning across the whole index.

ExoLaN: Physics-Consistent Context-Aware Dynamics Learning for Exoskeletons

cs.RO eess.SY ·2026-09-25 ·Lucas Schulze, Maximilian Schwarz, Jona Hoppe, Jan Peters, Oleg Arenz
similarity 0.69
Abstract

Task-agnostic assistive exoskeleton control based on human intention offers greater flexibility than conventional approaches that rely on predefined tasks or motion patterns. Human joint torque estimation enables task-agnostic assistance by characterizing user actions. Physics-consistent methods such as Deep Lagrangian Networks (DeLaN) have been applied to estimate the human torques in multi-user settings, but existing approaches cannot adapt to a specific user without retraining, and do not account for intermittent contacts during locomotion. We propose ExoLaN, a Context-Aware DeLaN for human-exoskeleton interaction that learns the full coupled system dynamics while adapting to changes in interaction context. ExoLaN combines temporal context with partial contact-force measurements from force-sensitive insoles to infer latent dynamics embeddings and estimate generalized contact torques. On seven unseen users performing 21 unseen tasks, ExoLaN reduces torque estimation MSE by 7% compared to a black-box baseline. Beyond inverse dynamics, ExoLaN serves as a unified model that also enables accurate forward prediction: training with a multi-step prediction loss reduces acceleration MSE by 59% and long-horizon position and velocity errors by 60% and 93%, respectively, compared with a single-step loss. Moreover, the learned latent context captures task information without explicit task labels, making it a promising signal for task-aware assistive control.

0.19

Transformer-Based Trajectory Prescription for sEMG-Optimizing Robot-Mediated Rehabilitation

cs.RO cs.HCcs.LG ·2026-11-05 ·Gabriel Parra, Kimia Khoshnami, Daniel S. Brown, Laura A. Hallock
publishedcode/data similarity 0.69
Abstract · Accepted for presentation and publication in the 2026 Conference on Robot Learning (CoRL). PMLR, 2026

Robot-mediated rehabilitation has the potential to deliver high-intensity, individualized therapy, but existing systems (which have not consistently improved outcomes) typically prescribe kinematic trajectories rather than explicitly targeting the neuromotor activations thought to support recovery. To address this gap, and ultimately enable activation-optimizing rehabilitation robot behavior, we present a personalizable transformer-based model mapping individuals' muscle activations (as measured via surface electromyography) to prescribed contact force trajectories when interacting with an end-effector rehabilitation robot. The model uses a transformer encoder-decoder leveraging rotary positional embeddings (RoPE) to generate a latent representation of trajectory-relevant and user-specific neuromotor factors, and augments trajectory prediction with flow matching to produce a distribution over plausible prescriptions biased toward the training distribution. Using data from 16 healthy participants completing 15 isometric trajectory tracking tasks, we evaluate generalization across held-out tasks and users, as well as the feasibility of user-specific fine-tuning within a therapy-session timescale. The model achieves mean trajectory prediction errors of <8% on held out tasks and users, with effectively instantaneous deterministic inference and sub-second sampling of trajectory distributions. An initial test using the model during live rehabilitation tasks demonstrates that, on average, participants reach the target neuromotor activations with just 15% error accumulated throughout the task. These results provide a proof of concept for data-driven, activation-targeted trajectory prescription in robot-mediated rehabilitation and establish a foundation for future validation in clinical populations. Data and code have been open-sourced as part of the OpenRobotRehab project on SimTK.

0.34

General Performance Guarantee for Human Torque Estimation-Based Task-Agnostic Assistive Exoskeleton Control

cs.RO cs.LGeess.SY ·2026-09-30 ·Duy Hoang, Bastien Berret, Olivier Bruneau, Laurent Fribourg
theory similarity 0.69
Abstract · 10 pages, 8 figures

Accurate human torque estimation is crucial for enabling task-agnostic control in robotic exoskeleton systems. However, estimation errors may cause mismatches between the robot assistance and the human intention, degrading controllability and task performance. In this paper, we address this issue by formally defining matched assistance as scenarios in which the robot positively contributes to human movement. Based on this definition, we develop a theoretical framework to design the robot's desired interaction torque that guarantees a lower bound on the matched assistance probability. Importantly, the proposed guarantee holds over the entire torque distribution, including unseen data beyond the training tasks. This provides our method with strong reliability and generalization, both of which are critical for effective exoskeleton control. The proposed strategy is implemented on the ABLE upper-limb exoskeleton and evaluated in a multi-task setup. Experimental results validate the theoretical guarantees and demonstrate that the proposed strategy achieves effective general performance across several tasks, guaranteeing movement smoothness while reducing human physical effort.

0.19

Recursive Self-Improvement of Exoskeleton Assistance Policies through Human-in-the-Loop Feedback

cs.RO ·2026-11-01 ·Muyuan Ma, Shuo Jiang, Lijun Han, Xinpan Meng, Zhenghua Ma +3 more
hot direction similarity 0.68
Abstract

To reduce reliance on manual design and extensive parameter tuning, a framework for the autonomous evolution of exoskeleton assistance policies through human feedback is proposed. Assistance policies are autonomously generated as executable control code by an intelligent agent and evaluated in experiments with human participants. Subjective user feedback, movement performance, and muscle activation measurements are incorporated into policy assessment. Based on these assessments, policy deficiencies are autonomously identified and the control code is revised by the agent for subsequent trials. A closed loop of policy generation, human feedback, evaluation, and autonomous refinement is thereby established. The framework is evaluated using GPT, DeepSeek, GLM, and Kimi, and initial assistance performance and refinement outcomes are compared across models. Despite differences in initial performance, effective assistance is achieved with all four models after a single autonomous refinement iteration under the tested conditions. Across three tasks, biceps and triceps muscle activation levels are reduced by 29.4% and 35.2%, respectively, compared with those measured without an exoskeleton. However, limited adaptability to unexpected situations is observed, indicating that further improvements in robustness and safety are required.

0.30

Burden, Bounty, or Bliss? Muscle-Aware Retargeting and Null-Space Exploration for Whole-Body Musculoskeletal Control

cs.RO ·2026-11-07 ·Ruiyang Kong, Takeshi Oishi
benchmark similarity 0.66
Abstract · 9 pages, 4 figures, 4 tables. Submitted to IEEE ICRA 2027

Learning whole-body musculoskeletal control from human motion is important for developing human-like robots, assistive devices, and rehabilitation systems. This task presents two main challenges, namely reference trajectories that are kinematically plausible but difficult to reproduce through muscle-driven dynamics, and a highly redundant 700-dimensional action space in which unstructured exploration can easily disrupt the target motion. In this paper, we propose a motion-to-policy pipeline that exploits muscle redundancy in two complementary stages. First, muscle-aware retargeting (MAR) performs bounded adaptation of kinematic trajectories subject to hard semantic, anatomical, and contact constraints. We motivate the constraint bounds by analyzing how reference-trajectory artifacts affect muscle-driven tracking. Second, null-space exploration (NSE) estimates a one-control-frame mapping from muscle excitations to generalized forces and injects bounded, anatomically structured perturbations along its null space into the actions of a value-guided flow policy. On a 24-clip motion-capture benchmark, MAR and NSE together solve every reference, reach the full horizon with half the samples of the baseline pipeline, and lower joint-center error by 44% without late collapse. To the best of our knowledge, this is the first end-to-end pipeline that transforms monocular video into a trained whole-body imitation policy controlling 700 muscles.

0.13

Blind Dexterity: Whole-Body Humanoid Manipulation via Pure Proprioception

cs.RO ·2026-08-30 ·Aditya Bhatt, Oleg Kaidanov, Puze Liu, Jan Peters
positioncode/data similarity 0.65
Abstract · 9 pages, 6 figures. Project page: https://aditya.bhatts.org/BlindDexterity/

We present blind, whole-body manipulation skills on a Unitree G1 humanoid using only onboard proprioception, without cameras, markers, force-torque, or tactile sensors. Despite this minimal sensing, the trained policies exhibit surprising capability across qualitatively different tasks: push-resilient bipedal walking without IMU feedback, active soccer ball trapping with a foot, seeking and lifting a suitcase by its handle, and mounting a randomly positioned skateboard. We argue that these capabilities arise from a key underappreciated signal: the way the joint encoder readouts evolve under purposeful compliant contact, effectively forming a whole-body tactile channel. By generating contact-rich motions, the trained policies actively probe the environment; as a result, task-relevant object state (e.g., pose) becomes increasingly decodable from short proprioceptive histories. We expose this information using compact task-specific state estimators trained alongside, but fully separately from, the policies; their prediction errors decrease rapidly after informative contact. Our results indicate that joint encoder-based proprioception, combined with compliant actuation (now widely available on commercial robots and low-cost motors) is already a strong, practical substrate for whole-body dexterous manipulation and interactive perception, and therefore a natural foundation on which richer sensing can be layered.

0.43

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.65
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

Learning Accurate End-Effector Trajectory Tracking with Inertial Feedback for a Quadruped Manipulator

cs.RO ·2026-11-17 ·Dohyeon Kim, Seungyong Han, Yeongtae Jung
similarity 0.65
Abstract

Accurate end-effector trajectory tracking on quadruped manipulators is challenging because uncertainties in actuators, foot-ground contact, and geometric errors are propagated through the leg-arm kinematic chain. Detecting such errors requires sensing beyond joint encoders that can capture the effects of these uncertainties on the robot's motion, since joint encoders only provide measurements at the actuated joints and cannot fully observe mechanical errors such as backlash, dimensional inaccuracies, or structural deformation. This work addresses these challenges using a reinforcement learning framework with end-effector (EE) inertial feedback, targeting local high-accuracy manipulation while maintaining a nominal body pose and support configuration without intentional body motion or foot repositioning. The learned policy uses EE inertial measurements to compensate for tracking errors induced by uncertainties throughout the leg-arm system that cannot be fully inferred from proprioception alone. Simulation and real-world experiments on continuous EE trajectory tracking show overall improvements relative to nominal and proprioception-only baselines. In real-world experiments, the proposed policy reduces the MoCap-based RMSE by 17.3% and 28.0% relative to the nominal baseline under the two in-distribution (ID) command conditions, respectively, and by an additional 12.6% and 15.9% relative to the proprioception-only baseline. Furthermore, the trajectory-wise RMSE between FK-reconstructed and motion-capture-measured end-effector positions averaged 12.61+-2.15mm (mean+-standard deviation) across 24 controller-trajectory combinations, revealing a substantial discrepancy between nominal kinematic reconstruction and measured end-effector motion.

0.22