CS Paper Radar

Scalable Reservoir Computing for Disturbance Localization and Identification in Power Grids

Erin Obermayer, Amir Sajadi, Bri-Mathias Hodge, Juan G. Restrepo

eess.SY ·submitted 2026-10-23 00:20 UTC · v1

Abstract

In this paper, we present a novel method for the localization and temporal waveform reconstruction of disturbances in complex power grids using observations of system state variables. Although various methods exist for detecting these events, accurately identifying and responding to them remains a significant challenge due to the grid's size, speed, complexity, and inherently dynamic behavior. We formulate a method for disturbance localization and reconstruction based on reservoir computing, a recurrent neural network architecture. We show that our method is able to recover the time dependence of previously unobserved disturbances, is robust to missing information, and can operate online. The approach requires only observed system data and knowledge of the network topology, without requiring a physical model of the system dynamics, and can recover simultaneous disturbances occurring at multiple locations. We implement a scalable parallelized reservoir architecture and demonstrate our algorithm on test IEEE cases and a reduced WECC system.

Comment
11 pages, 9 figures, submitted to IEEE: transactions on power systems

Closest papers

Nearest neighbours by meaning across the whole index.

Inference of Unknown Dynamical Components Using Next Generation Reservoir Computing: From Chaotic Systems to Climate Data

cs.LG nlin.CD ·2026-09-21 ·Jule Budnick, Andrew Keane, Serhiy Yanchuk
similarity 0.60
Abstract

We investigate next generation reservoir computing (NGRC) as a data-driven approach for inferring unseen components of dynamical systems. We compare NGRC with traditional reservoir computing (RC) using the Lorenz and Rössler system, where two unknown components are inferred from one given component. For both systems, NGRC achieves accurate results while requiring fewer training data and less computational time than RC. We identified an inverse proportional behavior between the number of time-delayed steps needed for NGRC and the temporal resolution, indicating that the physical time span covered by the delay interval is an important factor in determining the required number of delayed steps. Finally, we apply NGRC to the observational climate data of ENSO (El Niño--Southern Oscillation) and infer one observable from the remaining variables. Despite the noise and complexity of the real-world data, the NGRC shows promising results. Our findings demonstrate the potential of NGRC for efficient inference of unseen components in both controlled dynamical systems and real-world data.

0.32

RC Prediction: A Python Package for Parameter-Aware Reservoir Computing

cs.LG eess.SYmath.DS ·2026-10-29 ·Jin-Cheng Rao, Zheng-Meng Zhai, Ying-Cheng Lai
benchmarkcode/data similarity 0.59
Abstract

A nonlinear dynamical system can be characterized by the autonomous evolution of its state in time and its dependence on system parameters. As a parameter varies, the dynamics can change quantitatively and, at bifurcation points, qualitatively. When the governing equations are unknown, a data-driven model should therefore capture both elements from observational data, rather than reproduce the dynamics at a single operating condition only. Parameter-aware reservoir computing (PARC) is a model-free framework for this purpose, where the parameter is supplied to a reservoir computer through an additional input channel. PARC is trained on time series recorded at several parameter values, and the trained reservoir, run in closed loop as an autonomous dynamical system, generates trajectories at parameter values that were never observed. rc_prediction is an open-source Python package that implements this workflow. It provides multi-parameter training of a reservoir, autonomous closed-loop prediction at user-specified parameter values, parameter scans, and a standard echo state network for forecasting at a fixed parameter. Hyperparameter optimization and optional GPU acceleration through PyTorch are also provided. We use three benchmark dynamical systems as examples to demonstrate its usage. As one of the featured applications, here we illustrate the prediction of critical transitions and system collapse: trained only on pre-critical data, the model is queried beyond the training range to predict whether the system collapses, to estimate the critical parameter $p_c^{*}$, and to characterize transient lifetimes.

0.19

Learning-Based Augmentation and Adaptation for Grid Sim-to-Real Model Discrepancy

eess.SY ·2026-09-18 ·Sayak Mukherjee, Kyung-Bin Kwon, Ramij R. Hossain, Marcelo Elizondo
benchmark similarity 0.57
Abstract · 12 pages, 5 figures, 3 tables

Modern power systems can encounter increased discrepancy between the operators' simulation model and the actual true dynamics of the grid, driven by uncertainties caused by integration of new inverter-based resources (IBRs), large loads, unmodeled dynamics, parameter drifts, etc., to name a few. All of these impact the control room operations, where some critical oscillations may not be captured during the transient studies. To circumvent these issues, we propose a learning-augmented hybrid approach where the operator simulation model is supplemented with artificial intelligence (AI)-learned residual models using the phasor measurement unit (PMU)/ point-on-wave (PoW) based sensed trajectory data. The physics-based operator model provides interpretability and structural consistency, while the learned residual captures discrepancies caused by non-idealities. The learned model employs advanced neural architectures and consists of a backbone encoder and multi-head decoder layers for heterogeneous grid channels. Subsequently, we formulated a continual learning-motivated adaptation framework such that the baseline residual AI model can also be updated when the underlying real grid model changes in future conditions. Extensive numerical simulations are performed on the IEEE 68-bus benchmark model with a diverse set of disturbances, and different state-of-the-art predictive architectures involving recurrent learners, latent neural ODEs, and transformers are explored to demonstrate both residual learning and adaptation capabilities.

0.28

Machine Learning-Based State Estimation for an Actual Transmission System Using Field PMU Data

eess.SY ·2026-09-22 ·Shiva Moshtagh, Nihar Thakkar, Anamitra Pal, Evangelos Farantatos
published similarity 0.57
Abstract · Accepted for presentation at the 60th Hawaii International Conference on System Sciences (HICSS-60), 2027

Time-synchronized state estimation (SE) plays a critical role in ensuring real-time situational awareness in modern power systems. However, achieving full system observability using phasor measurement units (PMUs) is often impractical due to cost and deployment constraints. Moreover, SE operation at PMU timescales imposes stringent requirements on latency, robustness, and reliability that are difficult to satisfy using conventional iterative hybrid SE techniques under incomplete observability by PMUs. This paper evaluates the feasibility of deploying deep neural networks for PMU-timescale, time-synchronized SE in real-world PMU-unobservable transmission systems using actual data from a US power utility. Key contributions include a systematic assessment of estimation accuracy, scalability, and computational performance under realistic operating conditions.

0.34

A KKL Observer Perspective on Reservoir Computing

eess.SY cs.LGmath.DSmath.OC ·2026-10-03 ·Anastasia Bizyaeva, Fernando Castaños, Jaime A. Moreno
theory similarity 0.57
Abstract · 8 pages

Reservoir computing (RC) is a machine learning technique for data-driven modeling of dynamics for forecasting and control, primarily studied in computer science and physics literature with promising applications in neural network learning, physical computing, and neuroscience. Why reservoirs learn and how to choose good reservoir architectures are considered important open questions. We show that the RC problem is mathematically an extension of a classic problem in systems and control theory, the Kazantzis-Kravaris-Luenberger (KKL) observer design problem. As a consequence, many of the questions considered open for RC stand to benefit from a large body of theory in the mature KKL literature, non-exhaustively including on questions of embedding, transverse stability, local and global uniqueness guarantees, and effective data-driven solution constructions. Elaborating on this connection, we show that the surprising forecasting ability of reservoirs is in fact a direct consequence of the well-known observer internal model principle, derive an upper bound on the prediction error over a fixed forecast horizon, and provide a partial explanation for why linear readout training in RC works reasonably well. This work illustrates how classical ideas from systems and control can provide strong theoretical backing and open new questions for modern machine learning methods.

0.44

GENCO - A Unified Neural Solver Embedded in a Development Framework for Steady-State Grid Analysis

cs.AI ·2026-08-10 ·Alban Puech, Matteo Mazzonelli, Tamara R. Govindasamy, Mangaliso Mngomezulu, Héctor Maeso-García +17 more
code/datahighly cited similarity 0.55
Abstract

Foundation models are transforming business workflows and boosting productivity, yet they remain largely absent from engineering domains such as power system analysis, where strict physical consistency must be enforced. We present GENCO (GEometric Neural Corrective Optimizer), a unified neural solver for steady-state transmission grid analysis that handles power flow (PF), optimal power flow (OPF), and state estimation (SE) within a single architecture and shared grid representation. To support advances in neural power system solvers, we introduce the open-source GridFM Development Framework, which standardizes synthetic data generation and training in a low-code environment. We also release large-scale datasets with millions of PF and OPF scenarios across diverse grid topologies to support reproducible benchmarking. We evaluate GENCO on the PFDelta and OPFData benchmarks against state-of-the-art neural solvers and classical solvers, including Newton-Raphson and IPOPT, as well as on real-world Hydro-Québec SCADA data. For large-scale PF, GENCO recovers the full AC operating state, including voltage magnitudes and reactive power that DC-PF cannot provide, while matching DC-PF-level active power-balance residuals. It achieves up to 30x speedups over Newton-Raphson at only 2x the runtime of DC-PF. For OPF, it achieves up to 85x speedups over IPOPT while improving feasibility, optimality, and runtime over DC-OPF. For SE, GENCO is more robust than classical weighted least squares to noisy measurements and grid parameter errors, and always returns a high-quality estimate even when weighted least squares fails to converge. Together, the unified architecture and development framework provide a new approach to large-scale steady-state grid analysis, lowering the barrier to entry for power system engineers and marking a step toward Grid Foundation Models.

0.60

Bayesian Distribution System State Estimation with Flow Matching

cs.LG cs.AIeess.SP ·2026-10-29 ·Nan Lin, Peter Palensky, Pedro Vergara Barrios
similarity 0.55
Abstract · 10 pages

Medium-voltage feeders have few real-time measurements, so distribution system state estimation (DSSE) rests on pseudo-measurements of the secondary substations, a prior in Bayesian terms. Weighted least squares keeps the power flow exact but reduces this prior to a mean and variance, while supervised deep learning estimators also learn the power flow and are tied to one measurement set. We propose PoSE (posterior sampling for state estimation), which keeps the Bayesian structure of DSSE and learns only what the distribution system operator does not know, namely the distribution of substation injections, modelled by a neural network trained with flow matching on historical data. The power flow equations, grid topology and measurements enter only at sampling, through a noise-aware Kalman-type correction. The neural network therefore never approximates the power flow, but every posterior sample is a physically consistent operating point, and one trained prior serves any measurement set, noise level and topology. On the IEEE 33-bus feeder, PoSE lowers the probabilistic injection error (CRPS) by 6.7-7.5% against a full-covariance Gaussian prior in all 12 tested settings. It provides reliable uncertainty: the 90% intervals contain the true injection almost exactly as often as exact posterior samples would, whereas those of supervised estimators contain it in only 37-78% of cases. On the 240-bus unbalanced three-phase Iowa feeder, it gives the lowest injection, voltage and branch-current errors of all estimators. A fast variant matches this accuracy at 0.2-0.6s per snapshot and, without retraining, beats Gaussian priors and retrained supervised estimators on seven reconfigured topologies.

0.17

Sensor-Aware Joint Data Fusion and State Estimation under Sparse Multi-rate Distribution Grid Sensing

cs.LG ·2026-10-10 ·Pooja Algikar, Stefano Fenu, Kumarsinh Jhala, Siby Plathottam
similarity 0.55
Abstract

Distribution-system state estimation is a growing necessity for the modern power grid as the addition of local storage and generation add system complexity that an operator or aggregator is not able to directly monitor. Classical methods work well when all system elements are time-synchronized and at least partly observable, but multi-rate monitoring of sparse heterogeneous sensors typically relies on machine learning approaches. It is a common practice in the literature to structure this task as a two-stage pipeline, first fusing data from disparate sensors and then feeding the fused pseudo-measurements to a separately trained state estimator. We propose a heterogeneous latent graph ODE in which measurement functions and sampling processes are typed and localized on specific buses, paired with a graph- transformer state estimator solving DSSE specifically for multi-rate heterogeneous sensor placements, and demonstrate its effectiveness across multiple IEEE standard topologies as observability degrades.

0.26