CS Paper Radar

An exploration of plug-and-play flow matching for full-waveform inversion on breast imaging

Cristina Garcia-Cardona, Siting Liu, Fatma Terzioglu, Shanyin Tong, Lu Zhang

eess.IV math.NA ·submitted 2026-10-23 05:32 UTC · v1

Abstract

Full-waveform inversion (FWI) reconstructs sound-speed fields from measured waveforms, by solving an optimization problem that minimizes the discrepancy between measured waveforms and those predicted by a numerical wave-propagation model. However, choosing suitable regularization for this optimization is challenging because it must stabilize the inversion while preserving relevant structures, prompting us to investigate whether priors learned from representative sound-speed images can improve reconstruction. In this work, we adapt plug-and-play flow matching (PnP-Flow) to FWI by alternating waveform-misfit updates with updates from a pretrained flow prior. We explore the effectiveness of PnP-Flow reconstruction by comparing it with total-variation (TV) regularization using noiseless transmission-only plane-wave data. Separate flow priors are trained on two circular-inclusion model families with constant and spatially varying backgrounds. We evaluate the method both on these in-distribution circle models and under substantial distribution shift by transferring the Gaussian-circle prior and reconstruction settings to breast phantom patches without retraining or retuning. Using the same number of waveform-misfit updates, the proposed PnP-Flow framework generally improves circle reconstruction accuracy and recovers breast lesion contrast more accurately than TV baselines.

Closest papers

Nearest neighbours by meaning across the whole index.

Plug-and-Play ADMM for Inverse Problems with Flow Matching Denoiser

cs.LG ·2026-11-10 ·Dibyanshu Kumar, Magda Gregorova
top venue similarity 0.66
Abstract · Accepted at NeurIPS 2026

Plug-and-Play (PnP) methods with generative priors have achieved strong performance in inverse problems, with recent flow matching models enabling fast and scalable reconstruction. However, a key challenge in PnP methods is maintaining consistency between data fidelity updates and the learned generative prior, as data-consistency steps can move iterates away from the flow trajectory. We propose an ADMM-based PnP framework for flow matching priors that enforces stronger consistency between the measurement model and the prior through auxiliary variables and dual updates. In addition, we introduce a trajectory correction mechanism that restores consistency with the flow via a combination of deterministic and stochastic projections. Our method provides a more principled integration of flow priors within PnP frameworks, achieving high-quality reconstructions with reduced computational cost.

0.35

Physics-Guided Flow Matching for CT Image Reconstruction

cs.AI cs.CV ·2026-08-28 ·Davide Evangelista
similarity 0.64
Abstract · 16 pages, 6 figures, 2 tables

Deep generative models have recently emerged as powerful priors for solving ill-posed inverse problems in CT, with diffusion-based approaches achieving state-of-the-art reconstruction performance. However, diffusion models typically rely on stochastic sampling procedures, long inference trajectories, and carefully tuned noise schedules, which can limit computational efficiency and numerical stability, especially at high spatial resolutions. In this work, we investigate Flow Matching as an alternative generative prior for CT reconstruction. We train a high-resolution Rectified Flow Matching model on 256x256 chest images from the Mayo Clinic Low-Dose CT dataset. To mitigate overfitting and limited anatomical variability, we employ a two-stage training strategy consisting of an initial phase with strong, anatomically informed data augmentation, followed by a fine-tuning phase with reduced or no augmentation to refine structural fidelity. The resulting model is capable of generating high-quality and anatomically coherent CT-like images, serving as a strong learned prior. We then evaluate multiple reconstruction methods specifically designed for Flow Matching models, including Plug-and-Play Flow, FlowDPS, Flower, and Flow-Priors (ICTM), and compare them against state-of-the-art diffusion-based reconstruction algorithms such as DDRM, DPS, and DiffPIR. Experimental results across several CT inverse problem settings show that Flow Matching-based approaches consistently outperform diffusion-based methods in terms of PSNR, SSIM, and perceptual quality, while requiring fewer sampling steps. Finally, we publicly release the trained Flow Matching model and accompanying code to facilitate reproducibility and future research. Overall, this work demonstrates that Flow Matching provides a stable, efficient, and effective alternative to diffusion models for high-resolution CT image reconstruction.

0.42

FIRM: Flow-based Imaging via Regularized Minimization

cs.CV ·2026-09-11 ·Shirin Shoushtari, Edward P. Chandler, Xiao Shi, Ulugbek S. Kamilov
similarity 0.62
Abstract

Flow matching methods for imaging inverse problems typically incorporate measurements through network conditioning or guidance during sampling. Neither approach explicitly applies the forward operator within the learned conditional velocity field. We develop a principled measurement-conditional velocity parameterization that does. For a linear interpolation path, we express the optimal velocity through the posterior mean $E[x_1|x_t, y]$ and show that this mean is the unique minimizer of a variational objective with an explicit data-consistency term. The velocity defined by this minimizer provably transports the source distribution to the measurement-conditioned posterior. This result leads to a forward operator-aware velocity field that is trained end-to-end and requires no separate guidance during sampling. Across five imaging tasks, our method achieves leading reconstruction quality with up to $50\times$ fewer network evaluations than competitive flow-based methods. Varying the number of sampling steps also controls the distortion-perception trade-off without retraining.

0.17

SNaP: One-Step Posterior Sampling for Noisy Inverse Problems

cs.CV ·2026-09-28 ·Shirin Shoushtari, Edward P. Chandler, Xiao Shi, Ulugbek S. Kamilov
similarity 0.61
Abstract

Diffusion and flow-matching models can produce high-quality posterior samples for inverse problems, but typically require tens to thousands of network evaluations per draw. MeanFlow enables one-step generation, yet applying it to inverse problems leaves no intermediate steps at which to enforce measurement consistency. We introduce SNaP, a one-step MeanFlow posterior sampler for linear inverse problems with Gaussian noise. Its central innovation is a measurement-adapted source: a Gaussian distribution whose mean and anisotropic covariance are determined by the measurement operator, observation, and noise level. The source anchors well-measured directions while preserving variation where the measurements are weak or uninformative. We show that the exact conditional flow transports this source to the true posterior. Across natural-image restoration and multi-coil MRI, SNaP produces diverse, high-quality samples with one network evaluation per draw, 30 to 2250 $\times$ faster than iterative samplers.

0.15

FFAI: Flow Matching with Feedback Training and Adaptive Initialization for CT Reconstruction

cs.CV ·2026-10-29 ·Jigang Duan, Heran Wang, Genwei Ma, Xing Zhao
benchmark similarity 0.60
Abstract

Although low-dose, sparse-view, and limited-angle CT involve distinct degradation mechanisms, all three pose reconstruction challenges due to limited measurement information and can therefore be addressed within a unified framework. In iterative image restoration with flow matching, prediction errors may cause inference states to deviate from the prescribed training path, while a fixed initialization may be unsuitable for inputs with varying degradation severity. We propose a unified conditional flow matching method that conditions on the initial reconstruction and combines feedback-aware training with degradation-adaptive initialization. During training, a teacher network simulates inference updates to generate shifted states, from which a student network learns to recover high-quality reference images, improving its ability to handle prediction errors. During inference, the starting time is selected based on the noise level or extent of missing projection data, and the noise added to the initial state is adjusted accordingly to adapt the starting point to the input. Experiments on public benchmark datasets show that the proposed method achieves better quantitative results than the compared methods across all three reconstruction tasks, effectively suppressing noise and artifacts while preserving anatomical structures and details.

0.19

Retrieval-Augmented Initialization with Dual-Guided Inversion for Flow-Based Inverse Problem Solvers

cs.CV ·2026-10-30 ·Hansam Cho, Seoung Bum Kim
published similarity 0.60
Abstract · WACV 2027

Flow models have recently emerged as powerful generative priors for solving inverse problems. Despite their success, most existing flow-based inverse problem solvers initialize the reconstruction process with random Gaussian noise. However, recent studies in image generation have shown that the choice of initial noise can significantly influence generation outcomes. The role of initialization as a distinct design choice in flow-based inverse problem solving remains comparatively underexplored. In this work, we systematically evaluate noise initialization strategies while holding the downstream flow-based inverse solver fixed. We propose Retrieval-Augmented Initialization with Dual-Guided Inversion (RA-DGI), a method that constructs improved initial noise by leveraging retrieved proxy clean images and dual-guided inversion. Extensive experiments across multiple inverse problems demonstrate that the quality of the initial noise substantially affects reconstruction fidelity and perceptual performance. RA-DGI outperforms standard random initialization and achieves superior results compared to inference-time scaling strategies, while requiring less computational overhead. These findings highlight initialization as a critical yet previously overlooked factor in flow-based inverse problem solvers.

0.24

HP-PnP-Flow: Hybrid Time Scheduling and Projection for Plug-and-Play Image Restoration via Flow Matching

cs.CV ·2026-10-19 ·Yong Li, Xiaojie Wang, Xiaoyan Zhang
similarity 0.59
Abstract

Image restoration is a fundamental inverse problem that seeks to recover high-quality images from degraded observations. Plug-and-Play (PnP) methods provide a flexible framework for integrating pretrained denoisers into iterative reconstruction, whereas flow matching offers an efficient generative modeling approach based on continuous-time ODE dynamics. Very recently, Martin et al. (ICLR, 2025) developed a PnP-Flow method, which integrates the PnP framework with flow matching through a time-dependent denoiser constructed from a pretrained flow matching model. By incorporating a different time schedule and an additional pixel-space projection operator, this paper proposes a novel efficient PnP-Flow algorithm (HP-PnP-Flow) that enjoys rigorous convergence guarantees under mild assumptions, without imposing restrictive conditions on iterates required by the aforementioned work. Numerical experiments on CelebA and AFHQ-Cat demonstrate that the newly proposed HP-PnP-Flow algorithm significantly outperforms PnP-Flow on several restoration tasks such as denoising, deblurring, super-resolution, random inpainting, and box inpainting. Notably, our algorithm achieves comparable or better reconstruction quality with substantially fewer iterations, reducing the iteration count from $500$ to $100$ for deblurring and super-resolution on AFHQ-Cat.

0.28

Lipschitz-Controlled Flow Matching for Robust Image Restoration

cs.CV ·2026-11-10 ·Sedjro Salomon Hotegni, Konstantin Sonntag, Paul-Christian Bürkner, Sebastian Peitz
similarity 0.58
Abstract

Flow-matching models can produce high-quality image restorations, but their learned dynamics may amplify small input perturbations and make reconstructions unstable. We introduce LipsFlower to reduce this amplification. We derive stability bounds for Flow-from-$Y$, which initializes the ordinary differential equation from a noise-perturbed observation, as well as for observation-conditioned posterior sampling, which conditions the velocity field on the observation throughout integration. Based on this analysis, we develop LipHDiT, a Lipschitz-aware hourglass diffusion transformer that serves as the vector-field architecture of LipsFlower. LipHDiT incorporates stabilized approximate spectral normalization, bounded modulation, and convex residual mixing. We also use adversarial finite-radius gain regularization at sampled interpolation states to penalize excessive sensitivity to the state and, for conditional sampling, the observation. We test both formulations on blind face restoration, measuring adversarial robustness and the perceptual quality of the reconstructions. LipsFlower reduces perturbation amplification while keeping restoration quality competitive with the evaluated baselines. These results suggest that Lipschitz-aware flow matching can improve the stability of generative image restoration.

0.36