CS Paper Radar

FFAI: Flow Matching with Feedback Training and Adaptive Initialization for CT Reconstruction

Jigang Duan, Heran Wang, Genwei Ma, Xing Zhao

cs.CV ·submitted 2026-10-29 07:15 UTC · v1
benchmark

Abstract

Although low-dose, sparse-view, and limited-angle CT involve distinct degradation mechanisms, all three pose reconstruction challenges due to limited measurement information and can therefore be addressed within a unified framework. In iterative image restoration with flow matching, prediction errors may cause inference states to deviate from the prescribed training path, while a fixed initialization may be unsuitable for inputs with varying degradation severity. We propose a unified conditional flow matching method that conditions on the initial reconstruction and combines feedback-aware training with degradation-adaptive initialization. During training, a teacher network simulates inference updates to generate shifted states, from which a student network learns to recover high-quality reference images, improving its ability to handle prediction errors. During inference, the starting time is selected based on the noise level or extent of missing projection data, and the noise added to the initial state is adjusted accordingly to adapt the starting point to the input. Experiments on public benchmark datasets show that the proposed method achieves better quantitative results than the compared methods across all three reconstruction tasks, effectively suppressing noise and artifacts while preserving anatomical structures and details.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Guided Flow Matching for CT Image Reconstruction

cs.AI cs.CV ·2026-08-28 ·Davide Evangelista
similarity 0.73
Abstract · 16 pages, 6 figures, 2 tables

Deep generative models have recently emerged as powerful priors for solving ill-posed inverse problems in CT, with diffusion-based approaches achieving state-of-the-art reconstruction performance. However, diffusion models typically rely on stochastic sampling procedures, long inference trajectories, and carefully tuned noise schedules, which can limit computational efficiency and numerical stability, especially at high spatial resolutions. In this work, we investigate Flow Matching as an alternative generative prior for CT reconstruction. We train a high-resolution Rectified Flow Matching model on 256x256 chest images from the Mayo Clinic Low-Dose CT dataset. To mitigate overfitting and limited anatomical variability, we employ a two-stage training strategy consisting of an initial phase with strong, anatomically informed data augmentation, followed by a fine-tuning phase with reduced or no augmentation to refine structural fidelity. The resulting model is capable of generating high-quality and anatomically coherent CT-like images, serving as a strong learned prior. We then evaluate multiple reconstruction methods specifically designed for Flow Matching models, including Plug-and-Play Flow, FlowDPS, Flower, and Flow-Priors (ICTM), and compare them against state-of-the-art diffusion-based reconstruction algorithms such as DDRM, DPS, and DiffPIR. Experimental results across several CT inverse problem settings show that Flow Matching-based approaches consistently outperform diffusion-based methods in terms of PSNR, SSIM, and perceptual quality, while requiring fewer sampling steps. Finally, we publicly release the trained Flow Matching model and accompanying code to facilitate reproducibility and future research. Overall, this work demonstrates that Flow Matching provides a stable, efficient, and effective alternative to diffusion models for high-resolution CT image reconstruction.

0.42

FIRM: Flow-based Imaging via Regularized Minimization

cs.CV ·2026-09-11 ·Shirin Shoushtari, Edward P. Chandler, Xiao Shi, Ulugbek S. Kamilov
similarity 0.69
Abstract

Flow matching methods for imaging inverse problems typically incorporate measurements through network conditioning or guidance during sampling. Neither approach explicitly applies the forward operator within the learned conditional velocity field. We develop a principled measurement-conditional velocity parameterization that does. For a linear interpolation path, we express the optimal velocity through the posterior mean $E[x_1|x_t, y]$ and show that this mean is the unique minimizer of a variational objective with an explicit data-consistency term. The velocity defined by this minimizer provably transports the source distribution to the measurement-conditioned posterior. This result leads to a forward operator-aware velocity field that is trained end-to-end and requires no separate guidance during sampling. Across five imaging tasks, our method achieves leading reconstruction quality with up to $50\times$ fewer network evaluations than competitive flow-based methods. Varying the number of sampling steps also controls the distortion-perception trade-off without retraining.

0.17

ReBridge-Flow: Re-Coupling Posterior Bridges in Flow Matching for Image Restoration

cs.CV ·2026-09-01 ·Jiaqi Zhang, Yiqi Wang, Hongjie Wu, Bohan Guo, Xinan Wang +4 more
similarity 0.69
Abstract · 66 Pages, 36 Figures, 15 Tables

Flow Matching provides an efficient generative prior for image restoration by learning continuous transport between source and data distributions. However, existing methods typically incorporate measurement constraints through local corrections. Such corrections may disrupt the source-clean endpoint coupling implicitly encoded by the pretrained flow, making the corrected endpoint pair incompatible with the current state. To address this issue, we propose ReBridge-Flow, a posterior bridge re-coupling method. Specifically, given the current state, ReBridge-Flow first decodes the corresponding local source and clean endpoints. It then incorporates measurement information through clean-side anchoring and synchronously re-couples the source endpoint, yielding a measurement-aware endpoint pair with improved local bridge compatibility. The re-coupled endpoints further define a posterior-informed transport direction for advancing the sampling process. We also introduce the Posterior Bridge Defect, which jointly characterizes measurement error, deviation from the flow prior, and bridge mismatch, and leads to explicit updates for clean-side anchoring and source-side re-coupling. Extensive experiments on multiple natural and medical image restoration tasks demonstrate that ReBridge-Flow effectively alleviates bridge mismatch and improves the structural consistency of restored images.

0.33

Geometry-bridge flow matching for blind rigid-motion correction in head cone-beam CT

cs.CL physics.med-phcs.CV ·2026-11-18 ·Sungho Yun, Seungryong Cho
similarity 0.69
Abstract

Rigid motion of a patient head during head cone-beam CT (CBCT) scan can degrade image quality and complicate recovery of accurate anatomical structures from the measured projections. We present a 3D flow-matching prior approach that learns the image changes induced by motion. Its geometry-bridge connects motion-corrupted and motion-free Feldkamp-Davis-Kress (FDK) reconstructed images of the same source volume through progressively reduced simulated motion. The forward projector's geometry derivative supplies analytic velocity targets along this path. A plug-and-play loop encompasses the learned image updates together with spline-based pose estimation, conjugate-gradient data consistency, and image total-variation regularization. Both the refined image volume and the FDK reconstructed image volume at the estimated poses are evaluated. On simulated 360-view scans from 30 held-out CQ500 patients with nominal per-component motion amplitudes within 10 mm / 10 degrees, the framework achieved state-of-the-art image reconstruction quality and motion accuracy in comparison with other methos such as learned autofocus and diffusion-based joint reconstruction. Mean peak signal-to-noise ratio (PSNR) reached 37.1 dB and mean detector-plane reprojection error (RPE) was 0.27 mm. With matched endpoints at the inference settings, the geometry bridge improved PSNR by 1.6 dB and reduced RPE by 33% relative to image-linear training. With 50 prior updates and coarse-to-fine motion estimation, total processing time averaged 9.1 minutes per patient on an RTX A6000.

0.21

Flow Straight to Reality: Perceptually Consistent Flow Matching for Efficient Image Restoration

cs.CV cs.AIcs.LG ·2026-08-11 ·Sangwoo Jo, Donggeun Ko, Jayeon Kang, Youngsang Kwak, Jaehwa Kwak +1 more
top venuecode/data similarity 0.67
Abstract · Accepted to ECCV 2026. Code is available at https://github.com/aiimaginglab/PCFlow

Image restoration is fundamentally constrained by the tradeoff between distortion and perception: minimizing pixel-wise error yields over-smoothed results, whereas optimizing for perceptual realism often introduces structural deviations. Recent approaches attempt to balance this tradeoff via posterior sampling or multi-stage generative pipelines, yet remain computationally expensive and architecturally complex. To overcome these limitations, we propose PCFlow (Perceptually Consistent Flow Matching), a unified framework that directly parameterizes a continuous transport from degraded observations to clean targets, jointly optimizing distortion and perceptual quality. While its latent consistency flow objective drives stable and efficient few-step inference, a Latent Consistency Perceptual Loss (LCPL) imposes semantic constraints directly on the guiding velocity field, steering the dynamics toward visually sharp data manifolds. Furthermore, recognizing the inherent conflict between structural and perceptual consistencies, we integrate a conflict-free gradient projection strategy to stabilize the multi-objective optimization landscape. Combined with lightweight, convolution-only backbone, PCFlow achieves competitive performance across diverse restoration tasks at a fraction of traditional computational costs.

0.89

TomoTransformer: Towards a Foundation Model for CT Reconstruction

cs.CV cs.LG ·2026-09-29 ·AmirEhsan Khorashadizadeh, Benjamín Béjar
benchmark similarity 0.67
Abstract

Supervised deep learning has advanced sparse-view tomographic reconstruction. However, conventional models, which typically map filtered back-projection (FBP) images or sinograms to clean reconstructions, are brittle under distribution shifts. Because they require retraining whenever projection counts and angles, detector resolutions, or data distributions change, their deployment in real-world applications remains limited. To address this, we introduce TomoTransformer, a transformer-based architecture that treats each \textit{local} filtered projection as an individual token and predicts missing views via self-attention. Crucially, TomoTransformer operates in a \emph{back-projection space} that separates projections across spatial locations, making view interpolation geometrically well-posed and invariant to detector size. This design yields a single foundation model that can process any number of input projections, at arbitrary angular locations and detector dimensions, and query any number of target angles without retraining. Trained on a large-scale dataset spanning diverse medical CT anatomies and natural images, TomoTransformer generalizes effectively across anatomies, materials, and resolutions. Extensive evaluations on several benchmark sparse-view datasets show that TomoTransformer significantly outperforms concurrent multi-purpose models like ViewTrans and matches or exceeds strong protocol-specific baselines, while remaining fully agnostic to the number of input and target projections. Furthermore, the model demonstrates robust zero-shot generalization on real experimental nanoscale brain data collected from an X-ray synchrotron, showcasing its practical utility for real-world applications.

0.19

Discriminative Flow Matching: Beyond Time-Conditioning in Generative Restoration via Flow-State Representations

eess.AS cs.SD ·2026-09-03 ·Shrishti Saha Shetu, Emanuël A. P. Habets, Andreas Brendel
similarity 0.66
Abstract

Existing Conditional Flow Matching (CFM) formulations describe transport progress using an explicit interpolation coordinate, commonly interpreted as time, assuming that a single global variable adequately represents a sample's position along the generative trajectory. In restoration tasks, however, transport progress is sample-dependent because the initial distribution may exhibit varying statistical dependencies with the target distribution. Thus, samples at the same interpolation coordinate can differ substantially in degradation level, distance to the target distribution, and restoration difficulty. We investigate whether signal representations learned by discriminatively trained models provide a meaningful description of generative transport state in CFM-based restoration. Through systematic latent-space analysis, we show that discriminative representations organize according to degradation severity and follow a consistent trajectory toward the clean-data manifold during generation. Motivated by these observations, we introduce the Discriminative Flow-State Hypothesis, which posits that discriminative representations encode a transport state governing generative restoration. Based on this hypothesis, we propose Discriminative Flow Matching, which conditions the Flow-Matching velocity field on Discriminative Flow-State Representations rather than explicit time coordinates. Experiments on speech enhancement and image denoising show that these representations characterize restoration progress, enable adaptive inference, and consistently outperform CFM and diffusion-related baselines. Our findings suggest that discriminative representations provide an effective state-aware alternative to explicit time conditioning and offer a novel perspective on the relationship between discriminative and CFM-based generative modeling.

0.18

SNaP: One-Step Posterior Sampling for Noisy Inverse Problems

cs.CV ·2026-09-28 ·Shirin Shoushtari, Edward P. Chandler, Xiao Shi, Ulugbek S. Kamilov
similarity 0.65
Abstract

Diffusion and flow-matching models can produce high-quality posterior samples for inverse problems, but typically require tens to thousands of network evaluations per draw. MeanFlow enables one-step generation, yet applying it to inverse problems leaves no intermediate steps at which to enforce measurement consistency. We introduce SNaP, a one-step MeanFlow posterior sampler for linear inverse problems with Gaussian noise. Its central innovation is a measurement-adapted source: a Gaussian distribution whose mean and anisotropic covariance are determined by the measurement operator, observation, and noise level. The source anchors well-measured directions while preserving variation where the measurements are weak or uninformative. We show that the exact conditional flow transports this source to the true posterior. Across natural-image restoration and multi-coil MRI, SNaP produces diverse, high-quality samples with one network evaluation per draw, 30 to 2250 $\times$ faster than iterative samplers.

0.15