CS Paper Radar

Delay Randomization Widens the Delay Margin of Learned Humanoid Motion Trackers

Shaoqin Li, Yi Sun

cs.RO ·submitted 2026-10-23 07:35 UTC · v1

Abstract

Learned humanoid controllers are usually trained in one simulator and then checked in a second one before they go near hardware. We ask what that check says about command delay. We train motion-tracking policies for a 24-joint humanoid on five motions taken from monocular video and test them in an independent CPU MuJoCo harness, which we first verify against the training model. Every policy completes its motion in at least 26 of 30 episodes under the training randomization. With 40 ms of constant command delay, however, survival drops to 15% on average (0% - 45%), and the delay margin is only 20 - 30 ms. Randomizing the delay during training (0 - 50 ms) lifts survival at 40 ms to 95% on average (75% - 100%) and moves the margin to 50 - 70 ms. A control arm trained for the same number of extra iterations without delay does not improve, so the gain comes from the randomization itself. This holds for all five motions with three training seeds each, and a policy trained in PhysX behaves the same way. The price is slightly looser tracking (0.02 - 0.06 rad on four motions) and, for the most dynamic motion, less robustness to other perturbations. We also show that the first sim-to-sim gap we saw came from the harness, a missing floor and a wrong timestep, and not from the physics engines. The 0 - 20 ms delay ranges common in locomotion training lie inside the margin an unrandomized tracker already has. The benefit comes from randomizing beyond it, so the range should be set from the robot's measured latency, and delay margin belongs next to other sim-to-sim metrics.

Comment
8 pages, 1 figure

Closest papers

Nearest neighbours by meaning across the whole index.

SONIC-K1: Porting a Universal Humanoid Motion Tracker to a Small Humanoid on a Single GPU

cs.RO ·2026-10-29 ·Kyrylo Kolesnichenko, Irvin Steve Cardenas, Jong-Hoon Kim
code/data similarity 0.67
Abstract · 4 pages, 3 figures. Project page: https://kyry.me/sonic-k1

We present SONIC-K1, to our knowledge the first open-weights whole-body motion tracker for the Booster K1 humanoid, obtained by adapting the SONIC framework to this smaller robot. The policy is trained from scratch on a single shared GPU with a small fraction of the compute reported for SONIC. In MuJoCo simulation, it tracks nearly all held-out motion clips and performs well on external benchmarks under SONIC's success criterion. The first release ran on the real K1 but shook its legs on steps and turns, and simulation showed a sensitivity to actuation delay. We therefore post-trained it with the robot's deployment torque limits, randomized actuation delay and gain randomization. The post-trained v1.0 stays robust under real-robot torque limits and large actuation delays, where the first release often failed, and in our runs on the real K1 it walks and turns without the earlier leg shaking. These results show broad motion-tracking capability on a modest training budget. Code, policy weights and evaluation tools are publicly available.

0.39

BlinkMimic: Training a Humanoid Motion Tracker in Minutes on a Single GPU

cs.RO cs.LG ·2026-11-12 ·Fuyi Chen
code/datapopular code similarity 0.66
Abstract · 18 pages, 5 figures. Code: https://github.com/fuyichen0725/blinkmimic

Whole-body motion tracking lets a humanoid robot follow reference motions, but training a tracking policy for a library of motions has usually taken hours of GPU time. SuperMimic showed that the policy can instead be trained by backpropagating through a world model learned from parallel simulation, and InstantTrack added Muon updates, a residual policy around the reference and an averaged deployed policy. We build on both and present BlinkMimic, a recipe that makes this training faster. On a simulated Unitree G1, BlinkMimic trains one policy for all 40 LAFAN1 clips in 3.4 minutes on a single RTX 4090, measured until three consecutive checkpoints reach a normalized return of at least 0.82 with no failed clip (mean of three seeds). We split training time into the cost of an iteration, the iterations needed to fit the motions, and the iterations needed to remove the last failures, and assign each component, inherited or new, to one of these terms. The new components are a step size that decreases once training has progressed, resets directed by failures of the deployed policy under deployment conditions, and GPU graph capture of the whole iteration. A leave-one-out ablation with three seeds per component shows which term each component affects, and further measurements of the gradient, the update rule and the failure cases explain these effects. Code and per-seed results are available at https://github.com/fuyichen0725/blinkmimic.

0.45

Sample, Simulate, Select: Physics-in-the-Loop Text-to-Motion for Humanoids Without Training

cs.RO cs.CV ·2026-09-22 ·Raphael Memmesheimer, Sven Behnke
similarity 0.62
Abstract · 8 pages, 9 figures, 5 tables

Text-to-motion models generate plausible human motion but do not model a robot's dynamics; whole-body tracking controllers execute robot references reliably but cannot replan an infeasible one. Recent language-to-humanoid systems bridge this gap by training. We measure how much of the gap closes with no training at all, by putting the deployment controller itself in the loop. Sample-simulate-select (S$^3$) draws $N$ motions per prompt from a frozen text-to-motion model, retargets each to a Unitree G1 by direction-matching inverse kinematics, rolls all of them out under full rigid-body dynamics with the pretrained SONIC tracking policy, and keeps the candidate the policy executed best. Because the verifier is the deterministic simulator itself, S$^3$ attains the any-of-$N$ ceiling by construction; what we measure is where that ceiling lies and what falls short of it. On 200 stratified HumanML3D test prompts with $N=8$, upright execution rises from 83.5% to 89.5% and hardware-gate passes from 33 to 85; on the complete test split (4,184 prompts) it rises from 80.5% to 89.5%. A kinematic verifier that predicts falls well (AUROC 0.90) recovers only a quarter of this gain: ranking a prompt's own candidates is harder than classifying the population. What selection cannot fix is one class, prompts that lower the pelvis, which a generator trained on retargeted robot data does execute. We further score the semantic fidelity of the executed motion with the standard text-motion evaluator, with a real-mocap control that attributes the loss to the robot projection, ablate the retargeter against GMR (complementary failures: the any-of-8 ceiling rises to 95.0% over both), and execute all 177 gate-selected clips on the real G1: every one completes standing, with hardware tracking error matching simulation ($r=0.94$).

0.28

SuperMimic: Scaling Humanoid Whole-Body Control with One Differentiable World Model

cs.RO ·2026-10-20 ·Qiayuan Liao, Yiyang Shao, Junfeng Long, Kevin Zakka, Roberto Horowitz +2 more
publishedbenchmarkhighly cited similarity 0.62
Abstract · Accepted at CoRL 2026 (Oral). Project website: https://supermimic.github.io

Tracking large human-motion datasets has become the dominant route to general, expressive humanoid whole-body control, but scaling across many motions is expensive. Current pipelines use model-free reinforcement learning, either merging per-motion specialists through lossy distillation, or brute-forcing a single policy with cluster-scale compute. SuperMimic amortizes learning across all motions with one differentiable world model of their shared dynamics, fit from logged transitions of a standard rigid-body simulator. The world model and the tracking policy train together in one loop, and backpropagation-through-time over short imagined rollouts gives the policy analytic gradients. Fast imagined rollouts and analytic gradients make policy learning efficient. In 3 hours on a single GPU, SuperMimic surpasses the return of a state-of-the-art motion tracker baseline trained for 7 days on 128 GPUs. It reduces GPU-hours by more than $1000\times$ and fails on only 25 of 129,514 benchmark motions, versus 179 failures for the baseline. After 9.8 hours on two GPUs, SuperMimic achieves zero failures. From 1 to 264 hours of motion, the world model's prediction error stays stable, and GPU-hours to a target return grow slowly. Our policy transfers to a physical Unitree G1 across diverse and acrobatic motions. SuperMimic removes compute as the bottleneck to scaling humanoid whole-body control, making it practical to measure motion-tracking scaling laws.

0.63

RAPAC-DP: Response-Aligned Pending-Action Compensation for Diffusion Policies under Delayed Execution

cs.RO ·2026-08-16 ·Tao Wang, Wei Wang, Jianhui Wang, ZhengYang Ye, Qi Wang +2 more
similarity 0.61
Abstract

Cloud-side inference expands the computational resources available to imitation-learning policies, but communication and inference latencies create a mismatch between prediction and execution. We propose RAPAC-DP, a response-aligned pending-action compensation framework for diffusion- and flow-based action generators. By conditioning on actions committed during inference, RAPAC-DP generates a full-horizon action chunk aligned with the scheduled handover time. A lightweight pending-action encoder and LoRA adapters learn this compensation while keeping the pretrained base policy frozen. We construct delay-conditioned training samples from delay-free demonstrations, requiring neither an explicit dynamics model nor additional data collected under delayed execution. In simulation benchmarks at the largest evaluated delays, RAPAC-DP retains 81.4\% of its overall delay-free performance on Kinetix and achieves a mean success rate of 63.3\% across three RoboMimic tasks. Across 450 physical trials on a Franka Panda manipulator, RAPAC-DP increases the high-delay mean success rate from 28.9\% for RTC to 60.0\% across static and conveyor-based pick-and-place tasks.

0.04

XMimic and XSoma: Learning Humanoid Motion Tracking and Locomotion in Under a Minute

cs.RO cs.LG ·2026-11-16 ·Nico Bohlinger, Jan Peters
similarity 0.61
Abstract

We present XMimic and XSoma, which learn humanoid motion tracking and locomotion on rough terrain in under a minute of training. Both follow SuperMimic, which learns a world model of the robot and optimizes the policy with analytic gradients through short rollouts imagined in this model. Existing implementations of this method do not make use of larger GPUs, as every training iteration is a long chain of small GPU operations that run one after another. XMimic and XSoma therefore shorten this chain and run the steps of every iteration at the same time on up to four GPUs. We compile the complete training loop with JAX, including the MuJoCo Warp simulator. For locomotion, XSoma leaves only the dynamics of the robot to the world model and computes everything else exactly, including the terrain height under the feet. It learns with a horizon of one second and without a critic. On four H100 GPUs, XMimic learns to track all 40 LAFAN1 clips with the Unitree G1 in 0.86 minutes, 3.7 times faster than BlinkMimic on one GPU. XSoma reaches the tracking target that Holosoma's tests set for FastSAC in 0.77 minutes, 12.3 times faster than FastSAC on one GPU, while needing only an eighth of its environment steps.

0.21

Driving the Style: Velocity-Conditioned Whole-Body Control from Motion Demonstrations

cs.RO ·2026-11-16 ·Murad Dawood, Oezge Drama Berkenkamp, Antonio Gonzales Marin, Nutan Chen
similarity 0.61
Abstract

Achieving human-like behavior on humanoid robots has advanced rapidly by leveraging motion-capture demonstrations rather than hand-crafted cost functions. Adversarial imitation supplies a style signal that lets a policy fulfill a task while adhering to a desired style, but is difficult to transfer to hardware. Whole-body tracking through reinforcement learning instead deploys reliably and imitates demonstrations faithfully, but the resulting policies are conditioned on the future reference, so they require a reference trajectory at runtime and can fail when the motion differs from the training data. We train a humanoid policy directly with whole-body tracking rewards while restricting its actor to compact locomotion commands and robot observations. Reference motion supervises the reward and privileged critic, without supplying reference joint trajectories to the actor or requiring teacher distillation. The demonstrated style is thereby encoded in the policy through the tracking reward, so the robot reproduces the whole-body style under commanded velocities. Trained on a single random-walk motion and commanded with velocity profiles from held-out motions, our policy reaches at least 98\% success in simulation and completes every trial on the Unitree G1. On held-out slow walking, whole-body tracking drops to 2\% success and command-conditioned distillation to 56\%, and both fail on the real robot. On the trained motions, the joint position error of our policy stays within 8\% of whole-body tracking, and it has a higher style coverage than adversarial motion priors (AMP), which fell on the real robot without a safety crane.

0.21

STRIDE: Learning Humanoid Locomotion in Minutes with Acceleration-Based Rewards

cs.RO cs.LG ·2026-11-06 ·Nico Bohlinger, Jan Peters
similarity 0.59
Abstract

Learning locomotion directly on a humanoid robot is a promising direction to avoid the sim-to-real gap. However, locomotion rewards in Reinforcement Learning (RL) typically track the base velocity, which cannot be measured onboard without an external motion capture system or well-calibrated state estimator. This is why we introduce \method{}, which learns humanoid locomotion from minutes of samples with a reward that only requires the onboard Inertial Measurement Unit (IMU). Instead of tracking the base velocity, STRIDE rewards the robot for following a commanded acceleration profile. To learn efficiently from this reward, we use the off-policy RL algorithm XQC and combine a high gain setting for the joint position controllers with left-right symmetry augmentation. In simulation, STRIDE learns to walk on the Unitree G1 and Booster T1 humanoids within 14 minutes of samples. Compared to learning without these two components, it reduces the falls during training by 81%, while without them the robot learns only in over an hour.

0.11