CS Paper Radar

SONIC-K1: Porting a Universal Humanoid Motion Tracker to a Small Humanoid on a Single GPU

Kyrylo Kolesnichenko, Irvin Steve Cardenas, Jong-Hoon Kim

cs.RO ·submitted 2026-10-29 04:16 UTC · v3
code/data

Abstract

We present SONIC-K1, to our knowledge the first open-weights whole-body motion tracker for the Booster K1 humanoid, obtained by adapting the SONIC framework to this smaller robot. The policy is trained from scratch on a single shared GPU with a small fraction of the compute reported for SONIC. In MuJoCo simulation, it tracks nearly all held-out motion clips and performs well on external benchmarks under SONIC's success criterion. The first release ran on the real K1 but shook its legs on steps and turns, and simulation showed a sensitivity to actuation delay. We therefore post-trained it with the robot's deployment torque limits, randomized actuation delay and gain randomization. The post-trained v1.0 stays robust under real-robot torque limits and large actuation delays, where the first release often failed, and in our runs on the real K1 it walks and turns without the earlier leg shaking. These results show broad motion-tracking capability on a modest training budget. Code, policy weights and evaluation tools are publicly available.

Comment
4 pages, 3 figures. Project page: https://kyry.me/sonic-k1

Closest papers

Nearest neighbours by meaning across the whole index.

From Festival Video to the Stage: A Sim-to-Real Ladder for Long-Horizon Expressive Whole-Body Dance on a Commercial Humanoid

cs.RO ·2026-11-08 ·Hesham Shehata
similarity 0.70
Abstract · 19 pages, 12 figures. Four supplementary videos are linked in the manuscript

We present a pipeline for transferring Awa Odori, a traditional Japanese festival dance, from monocular video to a commercial Unitree G1 EDU humanoid. The pipeline combines human mesh recovery, kinematic retargeting, reinforcement learning for motion tracking in simulation, and onboard deployment via ONNX. Training ran on a single RTX 5070 GPU. An eleven-version deployment ladder evaluated on hardware examines three interventions. We detect and repair silent corruption of deployment artifacts, model state-estimator drift during training, and edit the reference motion to support stable execution and a controlled ending. The final policies achieved three consecutive rope-free completions of a 43-second routine, a 46-second performance with automatic handoff, and a continuous 9.7-minute rope-free performance composed from the captured motion. In a live handover, a single remote request let the robot start from and return to the manufacturer's walking controller on stage, with a measured torque-free window of 45-140 ms. We report the training dynamics and hardware outcomes and discuss failure boundaries involving compliant flooring and occlusion in monocular capture.

0.29

OneSteer: Unlocking Steerable General Humanoid Motion Tracking via One-Step Diffusion Whole-Body Control

cs.RO ·2026-10-30 ·Yifei Huang, Yazhao Yang, Weijia Li, Zhiheng Ma, Dian Shen
similarity 0.69
Abstract

Deployment objectives often specify desired outcomes without providing revised trajectories, while parts of the original reference must still be followed. We present OneSteer, a one-step diffusion whole-body controller that combines general motion tracking with selective test-time steering. To accommodate new objectives, differentiable task costs guide optimization of the generator's input noise with frozen weights, while body-group reference masks relax selected tracking requirements. Predicted state-action plans provide a shared interface for task optimization and feedback-conditioned execution. For nominal tracking, the model trained from scratch achieves the lowest local tracking error among the evaluated baselines on successful held-out AMASS and BONES clips. For steering, one frozen distilled controller adapts across diverse deployment objectives in simulation, raising the clean passage rate under a 1.25 m bar from 2% to 90%. On a physical Unitree G1, OneSteer completes all 27 nominal tracking trials across nine diverse whole-body motion sequences without falling. With a steering cost derived from a signed distance field built using only onboard LiDAR, it also passes under a 1.1 m low bar in four of five attempts and steps over a 12 cm hurdle without falling in all three attempts. Beyond control, prediction variation in the model trained from scratch ranks likely tracking failures without physics rollouts. This scoring method is more than 10x faster than simulation-based scoring with five rollouts per clip and guides targeted fine-tuning.

0.12

BRIDGE: An Open-Source Humanoid Platform via Morphology-Control Co-Design for Physical AI

cs.RO cs.AI ·2026-09-03 ·Jianren Wang, Letian Qian, Zikai Wang, Weiwei Wu, Junjie Zong +2 more
code/data similarity 0.67
Abstract

Developing humanoid robots capable of leveraging human behavioral data is essential for general-purpose embodiment, yet conventional development remains bottlenecked by a decoupled paradigm that isolates hardware design from whole-body control. This approach leads to suboptimal systems that compromise human-like fluidity and agility. To bridge this gap, we introduce a data-driven morphology-control co-design framework that optimizes humanoid morphology for human-like movement. To quantify morphological fidelity, we also introduce a novel metric that jointly considers kinematic retargeting fidelity to human motion and dynamic tracking performance. Our framework achieves state-of-the-art (SOTA) performance across all metrics compared to baseline humanoids (Bumi, K1, and Toddlerbot). Finally, we realize this design in Bridge, an open-source, 88cm-tall humanoid platform released alongside its control policy. We demonstrate that Bridge captures human motion data with superior fidelity, exhibiting exceptional performance across foundational locomotion, robust balance, and highly dynamic maneuvers. Videos and open-source materials: https://sites.google.com/view/bridgerobot.

0.46

Delay Randomization Widens the Delay Margin of Learned Humanoid Motion Trackers

cs.RO ·2026-10-23 ·Shaoqin Li, Yi Sun
similarity 0.67
Abstract · 8 pages, 1 figure

Learned humanoid controllers are usually trained in one simulator and then checked in a second one before they go near hardware. We ask what that check says about command delay. We train motion-tracking policies for a 24-joint humanoid on five motions taken from monocular video and test them in an independent CPU MuJoCo harness, which we first verify against the training model. Every policy completes its motion in at least 26 of 30 episodes under the training randomization. With 40 ms of constant command delay, however, survival drops to 15% on average (0% - 45%), and the delay margin is only 20 - 30 ms. Randomizing the delay during training (0 - 50 ms) lifts survival at 40 ms to 95% on average (75% - 100%) and moves the margin to 50 - 70 ms. A control arm trained for the same number of extra iterations without delay does not improve, so the gain comes from the randomization itself. This holds for all five motions with three training seeds each, and a policy trained in PhysX behaves the same way. The price is slightly looser tracking (0.02 - 0.06 rad on four motions) and, for the most dynamic motion, less robustness to other perturbations. We also show that the first sim-to-sim gap we saw came from the harness, a missing floor and a wrong timestep, and not from the physics engines. The 0 - 20 ms delay ranges common in locomotion training lie inside the margin an unrandomized tracker already has. The benefit comes from randomizing beyond it, so the range should be set from the robot's measured latency, and delay margin belongs next to other sim-to-sim metrics.

0.29

HumanoidNDM: Closing the Training-Deployment Gap of Motion Tracking via Humanoid Neural Dynamics Model

cs.RO cs.AIcs.LG ·2026-10-25 ·Chao Chen, Zhenrong Wang, Jilong Wang, Yusen Feng, Jiangran Lyu +2 more
published similarity 0.66
Abstract · Accepted to CoRL 2026

Humanoid robots have recently achieved remarkable success in motion tracking. However, during real-world deployment, robots inevitably encounter dynamics gaps arising from either extra physical disturbances or inaccurate simulation modeling, resulting in a significant training-deployment gap. Therefore, effectively leveraging real-world data to fine-tune policies represents the crucial last mile for robust deployment. To bridge this gap, we propose HumanoidNDM, an online fine-tuning framework for humanoid motion tracking driven by a real-world-trained neural dynamics model. First, in the data collection stage, we introduce a low-frequency reference perturbation method with an adaptive intensity mechanism, balancing deployment feasibility and exploration efficiency. Second, for the model training stage, we train a robust history-based, proprioceptive neural dynamics model in Euclidean space by incorporating differentiable forward kinematics, eliminating the reliance on costly motion capture systems. Finally, in the policy fine-tuning stage, we directly fine-tune the policy via backpropagated model gradients, achieving high data efficiency. Through physical validation on the Unitree G1 robot, we demonstrate that HumanoidNDM enables rapid real-world adaptation to various perturbations, representing the first online, MoCap-free fine-tuning framework for humanoid tracking policies.

0.26

BlinkMimic: Training a Humanoid Motion Tracker in Minutes on a Single GPU

cs.RO cs.LG ·2026-11-12 ·Fuyi Chen
code/datapopular code similarity 0.66
Abstract · 18 pages, 5 figures. Code: https://github.com/fuyichen0725/blinkmimic

Whole-body motion tracking lets a humanoid robot follow reference motions, but training a tracking policy for a library of motions has usually taken hours of GPU time. SuperMimic showed that the policy can instead be trained by backpropagating through a world model learned from parallel simulation, and InstantTrack added Muon updates, a residual policy around the reference and an averaged deployed policy. We build on both and present BlinkMimic, a recipe that makes this training faster. On a simulated Unitree G1, BlinkMimic trains one policy for all 40 LAFAN1 clips in 3.4 minutes on a single RTX 4090, measured until three consecutive checkpoints reach a normalized return of at least 0.82 with no failed clip (mean of three seeds). We split training time into the cost of an iteration, the iterations needed to fit the motions, and the iterations needed to remove the last failures, and assign each component, inherited or new, to one of these terms. The new components are a step size that decreases once training has progressed, resets directed by failures of the deployed policy under deployment conditions, and GPU graph capture of the whole iteration. A leave-one-out ablation with three seeds per component shows which term each component affects, and further measurements of the gradient, the update rule and the failure cases explain these effects. Code and per-seed results are available at https://github.com/fuyichen0725/blinkmimic.

0.47

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.66
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

Autonomous Track Racing with a Commercially Available Humanoid: System Design and Real-World Deployment

cs.RO ·2026-11-17 ·Koki Inami, Takashi Sato, Hiroyuki Oka, Shota Takizawa, Yuya Takahashi +5 more
similarity 0.65
Abstract · 7 pages, 2 figures. Submitted to IEEE Robotics and Automation Practice. Copyright may be transferred without notice, after which this versio…

Learning-based methods now let humanoids run robustly, and they have begun to compete in athletic events. Yet few reports describe a complete autonomous humanoid running system in an actual race, where the robot must follow a lane at a new venue, pace itself within hardware limits, and finish without intervention. We report such a system deployed on the Unitree G1, a commercially available general-purpose humanoid, in the 100 m, 400 m, and 1500 m events of the World Humanoid Robot Games 2026. The system integrates vision-based lane perception, path tracking, and a running policy trained by reinforcement learning with a human motion prior. To address the challenges of humanoid running, we stabilize head-camera images against body motion and use IMU-assisted leg odometry to bridge flight phases. To manage motor heating, we penalize hip-pitch torque during training, add heat-dissipation plates, and apply temperature-based speed limiting with event-specific pacing. The robot placed 13th of 74 in the 100 m, 10th of 44 in the 400 m first round before falling in the semifinal, and seventh of 35 in the 1500 m. In this deployment, thermal margin set the pace in every event, and the semifinal fall followed a lane-detection error.

0.15