CS Paper Radar

Supervised Source Separation of Electric Vehicle Interior Noise Using a Hybrid Transformer Architecture

Philipp Diel, Zhuo Cao, Arne Hildenbrand, Marco Günther, Stefan Pischinger, Hanno Scharr, Steffen Marburg

cs.SD cs.LGeess.AS ·submitted 2026-10-23 08:10 UTC · v1

Abstract

The interior sound of an electric vehicle is a superposition of several distinct noise contributions - wind noise, tire noise, powertrain (electric drive unit and inverter) noise, and auxiliary-drive noise - whose relative balance governs both the overall loudness and the perceived sound quality in the vehicle interior. Decomposing a recorded vehicle interior signal into these source contributions is a prerequisite for targeted acoustic engineering, but requires effortful measurement campaigns as well as expertise in the field of transfer path analysis. This work formulates the decomposition as a supervised, binaural source-separation problem with four target source contributions and adapts a hybrid time-spectrogram transformer architecture, originally developed for music demixing, to the domain of sound source separation for technical systems. To disambiguate source contributions, conditioning is introduced in the form of operating-state information, including electric drive speed, electric drive load, vehicle speed, and auxiliary-drive speed. Since isolated real-world reference stems are costly to obtain, the model is trained on a physics-based parametric data generator that synthesizes labeled component sounds from randomized virtual-vehicle hardware configurations and driving scenarios, so that the ground-truth contribution of each source is known by construction. Validation on both synthetic and measured vehicle interior sounds probes the achieved separation performance and underscores the feasibility of applying the proposed method for acoustic contribution analysis in technical systems.

Closest papers

Nearest neighbours by meaning across the whole index.

A Study on Improving Multi-class Audio Source Separation Via Decoupled CLAP Query Optimization and an Automated Data Engine

cs.SD ·2026-10-07 ·Amirhossein Hajavi, Hanhee Lee, Pushya Jain, Sky Qiao, Emmanuel Ko +2 more
code/data similarity 0.62
Abstract · Project page: https://amhajavi.github.io/AudioSourceSeparation

Language-queried audio source separation (LASS) enables extracting any sound source using natural language. However, adapting LASS models to application-specific sound classes is challenging due to noisy training data and limited semantic coverage of the CLAP-based control signals. We propose a framework comprised of an automated data engine for training-data curation and a two-stage optimization process for class-specific CLAP control signals. Our objective evaluations across seven sound classes show that data refinement and control signal optimization consistently improve source separation performance. Subjective evaluation with 17 participants further demonstrates perceptual improvements of the model trained with optimized control signals over baseline and similar commercial models.

0.22

SubRoformer: Subband Time-Domain Representation for Music Source Separation

eess.AS cs.SDeess.SP ·2026-11-05 ·Chunyat Wu, Chuang Ding, Paris Smaragdis, Qiuqiang Kong
code/data similarity 0.61
Abstract · 13 pages, 4 figures, 5 tables. Submitted to IEEE/ACM Transactions on Audio, Speech, and Language Processing

Music source separation extracts vocals and instruments from a mixed recording, enabling remixing, content production, and music analysis. Existing systems commonly operate on waveforms or full-band spectrograms. Waveform inputs contain many samples even in short segments, whereas a single spectrogram resolution imposes a shared time-frequency resolution trade-off across frequency ranges. We propose SubRoFormer, a Transformer-based system comprising a subband module and a residual RoFormer module. The subband module decomposes the mixture into frequency-localized, lower-rate signals for separation. It then reconstructs the target waveforms from the estimated subbands. The residual RoFormer module models temporal and cross-band relationships on temporally compressed features. It combines this context with fine-rate features through gated residual fusion to estimate source-specific complex masks. On the MUSDB18-HQ test set, training only on MUSDB18-HQ yields an average signal-to-distortion ratio (SDR) of 10.63 dB across four stems using target-specific models, achieving state-of-the-art performance among the compared systems without extra training data. With 500 additional training songs, a single model jointly separating all four stems achieves an average SDR of 11.59 dB, establishing state-of-the-art performance among the compared single-model multi-stem systems trained with extra data. Code and checkpoints are released at https://github.com/ArchiMickey/SubRoformer.

0.29

"What's That Sound?": A Versatile, Robust, and Lightweight Convolutional Transformer for Environment Sound Recognition

cs.SD cs.LG ·2026-08-16 ·Julia Huang
published similarity 0.60
Abstract · 6 pages, 7 figures, published to IYRC Conference Proceedings

The conventional hearing aid is both costly and lim- ited in usage, as it is not intended to detect non-speech audio. Our objective is to develop a machine learning solution to provide a more accurate and affordable mechanism to identify surrounding sounds to improve the safety of the hearing impaired, i.e., if a car is honking behind pedestrians, or a gunshot is fired, and they need to move away from the source. By adding randomized augmentations to audio, concatenating a Mel-Frequency Cepstral Coefficients (MFCCs) diagram and a log-mel Spectrogram, and including Convolutional Neural Networks (CNNs) in a Trans- former architecture, the Randomized Audiomentational Layered Convolutional Transformers (RALCT) model efficiently extracts features from diversified audio representations. In addition, RALCT is small enough, with only approximately 310,000 parameters, to be deployed into mobile devices. Experimental results on the UrbanSound8K dataset resulted in an accuracy consistently over 93% for all variations of RALCT with the highest at 94.56%, reaching state-of-the-art levels. To leverage the capabilities of this technology, a mobile app is developed to be integrated with the model to provide real-time safety control. RALCT thus represents a robust, lightweight, affordable, and versatile deep learning tool to aid the navigation and safety of the hearing impaired.

0.23

Differentiable Digital Signal Processing Mixture Model-Guided Diffusion for Synthesis Parameter Estimation from Harmonic Sound Mixtures

cs.SD eess.AS ·2026-09-13 ·Kengo Takemoto, Tomohiko Nakamura, Hiroshi Saruwatari
publishedhot direction similarity 0.58
Abstract · 6 pages, 3 figures, Accepted for APSIPA Annual Summit and Conference 2026

A differentiable digital signal processing (DDSP) autoencoder reconstructs a monophonic harmonic sound through three types of synthesis parameters: fundamental frequency, loudness, and timbre features. To handle mixtures of harmonic sounds within the DDSP approach, we have previously proposed a DDSP mixture model (DDSPMM). It represents a mixture as the sum of source signals synthesized by the decoders of pretrained DDSP autoencoders. Although DDSPMM enables direct estimation of synthesis parameters of each source from mixtures, it does not explicitly model temporal variations in the synthesis parameters and can produce excessive temporal fluctuations. In this paper, we propose a method for estimating synthesis parameters with temporally plausible trajectories by incorporating a denoising diffusion probabilistic model (DDPM) into the DDSPMM-based estimation. The DDPM is trained as a generative model of synthesis parameters. During estimation, the proposed method guides the DDPM reverse diffusion process with the reconstruction error between the observed mixture and the mixture synthesized by DDSPMM from the current estimates. Experiments on woodwind and string instrument ensembles showed that the DDPM-based regularization improves synthesis parameter estimation by imposing temporal plausibility on the estimated trajectories.

0.46

MuseFlow-TSE: Music-Aware Target Speech Extraction via Cross-Source Band-Splitting and Data-to-Data Flow Matching

cs.SD ·2026-10-21 ·Lu Ma, Yongliang Wang, Zhewen Su, Xin Tian
published similarity 0.58
Abstract · Accepted by NCMMSC2026

Target speech extraction (TSE) isolates a speaker's voice given an enrollment utterance, but existing work is validated almost exclusively without music. Discriminative methods are content-faithful yet masking-bounded; generative methods improve naturalness but may hallucinate, drift in identity, and require many steps. We present MuseFlow-TSE, a discriminative deletion, generative insertion framework for music-bearing scenes. Stage-1 is a music-aware cross-source band-split extractor that estimates target, interfering speakers, music, and noise under conservation and music-leakage constraints. Stage-2 is a data-to-data flow refiner initialized by the discriminative estimate, negatively conditioned on interference stems, and run for 1--4 difficulty-adaptive Euler steps with an end-to-end fidelity objective.

0.20

DAMSEP: Distance-Aware Monaural Source Separation using Multi-RIR Estimation

eess.AS ·2026-09-24 ·Wen Wen, Qiang Zhou, Yu Xi, Haoyu Li, Bohan Li +1 more
code/datahot direction similarity 0.58
Abstract · 5 pages, 1 figure, 5 tables. Submitted to ICASSP 2027. Comments updated; manuscript unchanged

Although room impulse responses (RIRs) encode source-distance cues, conventional monaural source separation focuses on recovering audio content without estimating source-specific RIRs, losing the associated spatial information. To address this limitation, we propose Distance-Aware Monaural Source Separation using Multi-RIR Estimation (DAMSEP), the first end-to-end framework that is jointly trained for source separation and multi-source RIR estimation from a single-microphone mixture. DAMSEP integrates a separation backbone with shared dereverberation and RIR estimation modules to jointly recover clean sources and source-specific complex convolutive transfer functions under source estimation and reverberant reconstruction objectives, enabling relative near/far ordering through the direct-to-reverberant ratios of the corresponding RIRs. For comprehensive evaluation, we introduce HETMIXR, which spans heterogeneous source content and diverse simulated room conditions with source-specific RIRs and geometric distance annotations. Experiments on HETMIXR demonstrate superior performance in source separation, RIR estimation, and distance ordering. Ablation studies reveal the complementary benefits of source supervision and reverberant reconstruction, while additional evaluations show generalization to single-speaker inputs and mixtures generated using measured RIRs from an unseen room. Our code and dataset are available at https://github.com/Wenanzhi/DAMSEP.

0.49

Iterative Audio Separation with Mixture Consistency via MIMO Model Extension

cs.SD cs.LG ·2026-09-07 ·Yukara Ikemiya, WeiHsiang Liao, Yuki Mitsufuji
similarity 0.57
Abstract

This paper proposes a general framework for stable and effective iterative audio separation with mixture consistency by extending source separation models to a multi-input multi-output (MIMO) configuration. In the field of audio separation, mixture consistency is an essential property for many applications that require accurate phase and timbral information of target sources. While iterative approaches such as diffusion models achieve perceptually superior results in speech enhancement or user-guided target source separation tasks, most existing methods focus on single-step separation with a single-input single-output (SISO) or single-input multi-output (SIMO) configuration through architectural improvements, since mixture-consistent audio separation is generally regarded as a regression problem that admits a unique solution. By extending these architectures to a MIMO configuration, we introduce iterative prediction without compromising the architectural advantages or the characteristics of mixture consistency. We conduct a comprehensive ablation study of combining the framework with discriminators and extending it to a generative model. Experimental results demonstrate significant performance improvements when applying the proposed framework to state-of-the-art separation models.

0.29

FlowSep 2: Self-Supervised Flow Matching for Language-Queried Audio Source Separation

cs.SD ·2026-08-22 ·Yi Yuan, Xubo Liu, Haohe Liu, Xiyuan Kang, Mark D. Plumbley +1 more
published similarity 0.57
Abstract · Submission to IEEE/ACM Transactions on Audio, Speech, and Language Processing

Language-queried audio source separation (LASS) aims to extract target sources from audio mixtures according to natural language descriptions, offering a flexible and scalable interface for audio source separation. However, most existing LASS methods rely on discriminative, mask-based models, which estimate masks from the input mixture. These methods often over-suppress target sounds or fail to fully separate them, especially when multiple sound events strongly overlap in complex acoustic scenes. In this work, we propose FlowSep2, a text-conditioned flow-matching generative model for LASS. Instead of directly predicting a separation mask, FlowSep2 learns to generate the target source representation from Gaussian noise in a latent space, conditioned on both the mixture representation and the text query. Specifically, we employ rectified flow matching with a Diffusion Transformer backbone. We further incorporate Self-Flow, a self-supervised flow-matching paradigm, into our LASS framework. By encouraging semantically structured latent representations under the generative objective, Self-Flow improves the model's ability to separate target sources according to text queries. Experiments on multiple LASS benchmarks show that FlowSep2 achieves state-of-the-art performance and demonstrates enhanced sound separation results in challenging scenarios with overlapping sound events.

0.36