CS Paper Radar

Decentralized Multi-View, Multi-Zone Tracking for Scalable Camera Networks

David Voihanski, Mor Sinai, Ben Zion Bobrovsky

cs.CV ·submitted 2026-10-20 15:45 UTC · v1

Abstract

We present a decentralized multi-view tracking system for scalable camera networks. Single-view detections are projected to bird's-eye-view (BEV) coordinates and fused by independent multi-view trackers, each managing a dynamic spatial zone. To support scalability across spatially partitioned camera networks, we introduce a decentralized layer for trajectory unification, utilizing a locking protocol and periodic track-merging operations termed global collate. This process is supported by a delayed-output buffering mechanism that retroactively applies history corrections. The configurable delay window absorbs asynchronous coordination latency and helps stabilize cross-zone identity consistency. We detail the design of dynamic zone polygons, consensus-based coordination, and the validation framework, which together maintain global ID consistency with minimal accuracy loss compared to a single-instance baseline in the evaluated configurations.

Closest papers

Nearest neighbours by meaning across the whole index.

On-the-Fly Homographies Calibration for Multi-Camera Tracking

cs.CV cs.AI ·2026-09-16 ·David Voihanski, Mor Sinai, Ben Zion Bobrovsky
similarity 0.71
Abstract

Precise multi-camera tracking traditionally relies on rigorous 3D site calibration, yet this requirement is often operationally impossible in large-scale deployments. Privacy regulations frequently prohibit recording video for offline calibration; limited bandwidth precludes synchronizing high-resolution streams from hundreds of cameras; and covering immense physical sites with calibration targets is logistically infeasible. We present a multi-camera homography calibration system designed to overcome these barriers through "on-the-fly" geometric refinement. Starting from coarse manual homographies, we introduce a centroid-based projection optimization (PO) that continuously aligns the ground-plane geometry using live detection streams. Because PO operates asynchronously on already-transmitted, lightweight metadata, it adds zero computational latency to the real-time tracker. This allows the system to adapt automatically to camera movements or environmental changes without human intervention. This optimized geometry feeds a multi-camera bird's-eye-view (BEV) tracker that fuses detections and unifies trajectories across zones. Crucially, by operating strictly on live anonymous metadata, our solution ensures a privacy-safe, zero-overhead, and resilient tracking pipeline that maintains global consistency in dynamic environments where static, recorded-video calibration is impossible.

0.31

Momentum: Persistent Dynamics for Video World Models

cs.CV ·2026-10-16 ·Nedko Savov, Stefan Maria Ailuro, Danda Pani Paudel, Yilun Du, Xi Wang +1 more
code/data similarity 0.62
Abstract

Video world models must capture how a scene evolves beyond the current camera view to generate consistent observations when its content reappears. Existing approaches rely on observation history, static point clouds, or image caches constructed from past frames. These representations are often expensive and, more importantly, cannot update dynamic scene content outside the field of view: generated vehicles and pedestrians may be forgotten after leaving the field of view or reappear in physically inaccurate states. We represent an evolving scene through synchronized videos from reference-camera rigs, each comprising eight cameras that jointly cover the surrounding scene. We connect these rigs in a graph and propagate video generation between neighboring rigs to coordinate scene dynamics across locations and time. We introduce Momentum, a two-stage pipeline: WorldUpdate jointly generates reference-camera videos as a shared memory of scene dynamics, and WorldInteract grounds camera-controlled video generation in this evolving memory, allowing moving content to remain represented outside the target view and reappear consistently. To support training and evaluation, we develop a CARLA pipeline that captures synchronized videos from reference camera rigs and a moving target camera, together with an evaluation framework measuring consistency within the generated world state and the target observations.Experiments on generated street scenes show that grounding target videos in scene dynamics generated by Momentum improves dynamic scene consistency by 126.2% in unseen scenes over static image conditioning, while also improving visual fidelity. Our models and source code will be made publicly available.

0.21

Consensus Capture in Reference-Based UAV Video Stabilization: A Benchmark on Dynamic Urban Scenes

cs.CV ·2026-11-12 ·Robert Fonod, Nikolas Geroliminis
benchmarkcode/data similarity 0.61
Abstract · 50 pages, 17 figures, 24 tables. Code at https://github.com/rfonod/stabilo-benchmark and data at https://doi.org/10.5281/zenodo.23623540 and…

Reference-frame stabilization registers every frame of a hovering-drone video onto one reference frame, keeping object positions comparable. The registration pipelines it relies on are selected on feature-matching benchmarks in which only the camera moves. Over a busy intersection, vehicles moving together supply mutually consistent correspondences that can draw the robust homography estimate toward their motion: consensus capture, which inlier statistics cannot flag. A two-part benchmark measures it and the object masking meant to prevent it. A static protocol scores ten pipelines under exactly known homographies on 4K aerial frames, tuned on a site-disjoint split at a matched resolution and feature budget. A dynamic protocol scores them at an offline and a real-time budget on hovers selected from the video alone to span the amount and coherence of moving foreground, plus a stationary control. It measures background alignment, object position error and the share of a moving group's displacement an estimate follows, against a pseudo-ground-truth reference audited with manually annotated ground control points, which also score every candidate. On static scenes, tuned AKAZE, RootSIFT, SIFT and BRISK lead, retuning the matcher thresholds raises the mean average accuracy (mAA) by at most 0.0062, and masking costs less than 0.005. Unmasked ORB is captured on 28 of 304 real-time dynamic pairs and on 6 offline; its real-time captured estimates have a median corner error of 18.8 px yet typical inlier counts and ratios. Masking removes capture for every pipeline and leaves the leading pipelines unchanged. Code, data and results are released.

0.37

MvT: Event-based Multi-view Projection for Multiple Object Tracking

cs.CV ·2026-10-27 ·Muxi Zha, Banglei Guan, Minzu Liang, Zibin Liu, Yang Shang +2 more
publishedcode/data similarity 0.61
Abstract · 16 pages, 20 figures, published to IEEE T-IP

Event cameras are increasingly used for Multiple Object Tracking (MOT), but their asynchronous event output often requires specialized methods. Existing processing methods primarily follow two paradigms, pseudo-frames and event-by-event. The former is the prevailing approach since its data format aligns with images, making image-based techniques applicable. However, it suffers from tracking failures when trajectories overlap or are spatially close on pseudo-frames. Facing this challenge, we propose a multi-view pipeline, Multi-view Tracking (MvT), which preserves the 2D data format to leverage image-based techniques directly while introducing additional spatio-temporal views to resolve tracking ambiguities in a single view. MvT comprises a Multi-view Projection (MvP) module and a Multi-view Fusion (MvF) stage. MvP encodes events into three complementary spatio-temporal views while mitigating the pattern discretization. Within MvF, multi-view results are unified into a 3D coordinate system, and tracklets are associated through an optimization model subject to specific criteria combination. Evaluations on four datasets, including our self-collected Small Objects Dataset (SOD), show that MvT seamlessly integrates image-based methods and outperforms existing non-learning and learning trackers in generalized scenarios, and effectively resolves the single-view tracking ambiguities. Being training-free, MvT is applicable when ground-truth annotation is infeasible, thereby highlighting its practical, data-efficient potential. Code is available at https://github.com/zhazhabiu/MvTracking.

0.47

ReWorld-Track: A Recursive Event World Model for Language-Guided Multi-Camera Tracking

cs.CV ·2026-09-29 ·Haoyang Wu, Shoudong Han, Chaoyue Li, Sijia Chen, Zhenyang Xie +1 more
similarity 0.59
Abstract · 41 pages, 8 figures. Corrected an author name; scientific content unchanged

Language-guided multi-camera tracking must preserve a target identity across unobserved gaps, where similar candidates and uncertain returns can make early associations unreliable. A wrong match can corrupt the history used to predict later observations and propagate identity errors across subsequent camera handoffs. We propose ReWorld-Track, a recursive event world model that carries association uncertainty into future predictions. Candidate matches and continued waiting define alternative target states, whose posterior probabilities are used to update a persistent recurrent belief. This representation preserves uncertainty about alternative trajectories through successive observations. This belief predicts the next camera, arrival time, and entry region, while appearance and language evidence guide association. By training across successive handoffs, the model learns to retain uncertainty that remains useful for later predictions and identity decisions. ReWorld-Track achieves HOTA scores of 65.19 on CityFlowV2 and 45.36 on MTMMC, with improved identity continuity across repeated handoffs. On MTMMC, its structured posterior update gains 0.50 HOTA points over a similarly sized generic updater and 0.94 points over fixed-moment soft association, raising next-camera accuracy from 86.03% to 87.41% and reducing median arrival-time error from 0.78 s to 0.71 s for subsequent target returns.

0.37

GRACE: Geometry- and Ray-Aware Camera-Efficient Multi-View Pedestrian Tracking

cs.CV ·2026-09-15 ·Taigo Sakai, Hiroki Kouno, Naoki Kato, Kazuhiro Hotta
similarity 0.59
Abstract

Reducing the number of cameras reduces the deployment cost but removes views that correct BEV responses stretched away from true pedestrian positions by projection and short score drops that can split tracks} in Bird's-Eye View (BEV) tracking. We introduce GRACE, a camera-efficient multi-view tracker with three components. Volumetric-Guided Fusion combines homography-based BEV features with features lifted through 3D space. Ray Conditioning exposes each camera's viewing direction to the fusion network. Its tracking component, BEV Track Recovery (BTR), uses low-confidence detections only to continue existing tracks. The same detections cannot start new tracks. With two WildTrack cameras, GRACE improves MOTA from 83.54 for TrackTacular, our baseline, to 91.07.

0.30

Refer-CityFlow and M3Track: A Benchmark Dataset and Reference Framework for Language-Driven Multi-Target Multi-Camera Tracking

cs.CV cs.MM ·2026-11-06 ·Phuong T. Nguyen, Hao Vo, Tam Bang, Hoang K. Tran, Hoang-Minh Dau +6 more
publishedbenchmarkcode/data similarity 0.59
Abstract · Accepted for publication at the IEEE/CVF Winter Conference on Applications of Computer Vision (WACV 2027), Evaluations and Datasets Track. 1…

Referring multi-object tracking enables users to specify targets through natural language, but existing Refer-MOT benchmarks primarily focus on single-camera settings. We formalize Referring Multi-Target Multi-Camera Tracking (Refer-MTMCT), where free-form queries specify identity-consistent trajectories to be recovered across a network of sequential, sparse-overlap cameras. We introduce Refer-CityFlow, a benchmark built on CityFlow's global cross-camera identity annotations and augmented with language queries requiring joint language grounding, cross-camera association, and spatio-temporal reasoning. Refer-CityFlow covers 96 videos from 40 roadside cameras with 660+ identity-consistent cross-camera trajectories, 4,362 trajectory-level descriptions, and 7,699 queries, including 1,699 real-user queries collected from 50 participants. Reference experiments on the four-camera Scenario 02 show that single-camera referring trackers reach 14.95-18.28 HOTA on real-user queries, while the evaluated cross-view method achieves about 0.05 HOTA in direct transfer. To establish reference performance, we provide M3Track, a modular multimodal reference framework in which a large language model (LLM)-based agent orchestrates interchangeable detection, tracking, and cross-camera association modules. M3Track reaches 44.10 HOTA and 65.40 IDF1 on the same real-user query set. The project repository is available at https://github.com/phuongnguyen194/Refer-CityFlow-and--M3Track.

0.43

SAVTrack: Selective Vote Aggregation for Reliability-Aware Point Cloud Tracking

cs.CV ·2026-09-15 ·Sifan Zhou, Linyue Tan, Qiwei Wang, Ziyu Zhao, Xiaobo Lu
hot direction similarity 0.58
Abstract · 12 pages, 5 figures

3D single object tracking (SOT) in LiDAR point clouds is essential for autonomous systems, but remains challenging under sparse and incomplete observations. In such cases, different target points provide highly uneven constraints on the object center, causing some point-to-center votes to be substantially less reliable than others. Existing point-based trackers typically aggregate these hypotheses without explicitly modeling their reliability, allowing inaccurate votes to contaminate proposal clustering and degrade localization accuracy. To address this issue, we propose \textbf{SAVTrack}, a motion-aware tracking framework with \textbf{Selective Vote Aggregation (SAV)}. SAVTrack estimates the reliability of each candidate vote from both local seed features and inter-frame motion context, and removes low-confidence hypotheses before proposal clustering. This pre-aggregation gating prevents unreliable hypotheses from affecting cluster formation while introducing only modest computational overhead. SAVTrack achieves competitive performance on KITTI and nuScenes, reaching 68.4/87.4 and 58.44/69.82 Success/Precision, respectively, while running at 82 FPS. It retains fewer than one-sixth of the candidate votes used by dense aggregation and remains particularly effective under sparse target observations.

0.37