CS Paper Radar

On-the-Fly Homographies Calibration for Multi-Camera Tracking

David Voihanski, Mor Sinai, Ben Zion Bobrovsky

cs.CV cs.AI ·submitted 2026-09-16 12:41 UTC · v1

Abstract

Precise multi-camera tracking traditionally relies on rigorous 3D site calibration, yet this requirement is often operationally impossible in large-scale deployments. Privacy regulations frequently prohibit recording video for offline calibration; limited bandwidth precludes synchronizing high-resolution streams from hundreds of cameras; and covering immense physical sites with calibration targets is logistically infeasible. We present a multi-camera homography calibration system designed to overcome these barriers through "on-the-fly" geometric refinement. Starting from coarse manual homographies, we introduce a centroid-based projection optimization (PO) that continuously aligns the ground-plane geometry using live detection streams. Because PO operates asynchronously on already-transmitted, lightweight metadata, it adds zero computational latency to the real-time tracker. This allows the system to adapt automatically to camera movements or environmental changes without human intervention. This optimized geometry feeds a multi-camera bird's-eye-view (BEV) tracker that fuses detections and unifies trajectories across zones. Crucially, by operating strictly on live anonymous metadata, our solution ensures a privacy-safe, zero-overhead, and resilient tracking pipeline that maintains global consistency in dynamic environments where static, recorded-video calibration is impossible.

Closest papers

Nearest neighbours by meaning across the whole index.

Decentralized Multi-View, Multi-Zone Tracking for Scalable Camera Networks

cs.CV ·2026-10-20 ·David Voihanski, Mor Sinai, Ben Zion Bobrovsky
similarity 0.71
Abstract

We present a decentralized multi-view tracking system for scalable camera networks. Single-view detections are projected to bird's-eye-view (BEV) coordinates and fused by independent multi-view trackers, each managing a dynamic spatial zone. To support scalability across spatially partitioned camera networks, we introduce a decentralized layer for trajectory unification, utilizing a locking protocol and periodic track-merging operations termed global collate. This process is supported by a delayed-output buffering mechanism that retroactively applies history corrections. The configurable delay window absorbs asynchronous coordination latency and helps stabilize cross-zone identity consistency. We detail the design of dynamic zone polygons, consensus-based coordination, and the validation framework, which together maintain global ID consistency with minimal accuracy loss compared to a single-instance baseline in the evaluated configurations.

0.22

GRACE: Geometry- and Ray-Aware Camera-Efficient Multi-View Pedestrian Tracking

cs.CV ·2026-09-15 ·Taigo Sakai, Hiroki Kouno, Naoki Kato, Kazuhiro Hotta
similarity 0.65
Abstract

Reducing the number of cameras reduces the deployment cost but removes views that correct BEV responses stretched away from true pedestrian positions by projection and short score drops that can split tracks} in Bird's-Eye View (BEV) tracking. We introduce GRACE, a camera-efficient multi-view tracker with three components. Volumetric-Guided Fusion combines homography-based BEV features with features lifted through 3D space. Ray Conditioning exposes each camera's viewing direction to the fusion network. Its tracking component, BEV Track Recovery (BTR), uses low-confidence detections only to continue existing tracks. The same detections cannot start new tracks. With two WildTrack cameras, GRACE improves MOTA from 83.54 for TrackTacular, our baseline, to 91.07.

0.30

OmniVLoc: Topo-metric Visual Localization for Omnidirectional Cameras

cs.CV cs.RO ·2026-10-20 ·Zhuo Yu, Shuyang Zhang, Huihua Zhu, Wenjia Ouyang, Zuo Zuo +4 more
code/data similarity 0.65
Abstract · 8 pages, 7 figures

Omnidirectional cameras provide surround-view information, significantly overcoming the field-of-view constraints for traditional visual localization systems. However, existing localization systems fail to fully exploit the characteristics of omnidirectional cameras, struggling to deliver accurate and robust localization performance amidst scene content variations and illumination-induced appearance changes. In this work, we propose OmniVLoc, a surround-view localization system based on a topo-metric framework. By integrating state-of-the-art global place recognition and monocular depth estimation methods, we introduce a multi-constrained visual localization paradigm. By solving a scale-aware pose graph and performing precise spherical bundle adjustment, we accurately recover the metric-level pose for each query frame.Furthermore, a hierarchical verification mechanism is designed to filter out erroneous outputs across different stages, effectively bolstering the overall system robustness. Extensive experiments on both public and our custom datasets validate the superior accuracy and reliability of OmniVLoc. To benefit the community, our source code and dataset will be made publicly available upon publication.

0.38

Re-engineering SORT-based algorithms for low-cost small object tracking from omnidirectional footage

cs.CV ·2026-09-07 ·Xin Shu, Meegan Gower, Yvonne Buckley, Anil Kokaram
benchmarkdatasetcode/data similarity 0.64
Abstract · Accepted by IEEE 28th International Workshop on Multimedia Signal Processing (MMSP)

Multi-object tracking (MOT) has advanced rapidly in urban surveillance and autonomous driving, yet many trackers rely on ReID- and transformer-based appearance encoders and are designed for standard FoV cameras. These assumptions break down for low-cost omnidirectional deployments, where equirectangular projection introduces seam discontinuities and targets appear to be small and fast-moving. We address multi-object tracking of flying animals captured in remote environments using omnidirectional cameras. We propose a lightweight framework that re-engineers SORT-based tracking for this geometry, including (i) a Seam-Aware Motion Model that keeps the Kalman state continuous across the seam, (ii) a composite seam-aware association cost that pairs a wrapped Euclidean term with GIoU, and (iii) OmniSmall, a new benchmark of omnidirectional wildlife footage. On our new dataset, with ground-truth detections, our modifications improved over OCSORT by +8.51 HOTA, +9.41 MOTA, and +10.17 IDF1; with YOLOX detections the gain narrows to +1.95 HOTA. Our proposed methods improved tracking performance on OmniSmall and remained competitive on JRDB without adding appearance encoders while keeping the tracking stage CPU-only. Our dataset and source code are available at: https://github.com/Xin-Shu/OmniSORT.git.

0.49

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.64
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

MVP-SLAM: Multi-Camera Visual-Inertial Floorplan-Prior SLAM

cs.RO ·2026-09-30 ·Asier Bikandi-Noya, Miguel Fernandez-Cortizas, Muhammad Shaheer, Holger Voos, Jose Luis Sanchez-Lopez
similarity 0.64
Abstract · 9 pages, 4 figures. Submitted to IEEE Robotics and Automation Letters (RA-L)

Indoor building construction sites are demanding environments for visual SLAM, where variable lighting and repetitive, low-textured structures make the system drift over long trajectories, though structural elements such as walls remain distinguishable despite these conditions. These buildings are constructed according to their as-planned floor plans, available from the design phase, and although the actual as-built site can differ from this design, floor plans still provide a metric reference, both to localize the system in the building and to correct drift. Existing methods often use the floor plan to correct an already-built trajectory offline, and those that instead correct it online typically rely on depth sensors. We instead present MVP-SLAM, an online visual-inertial SLAM on two opposite-facing fisheye cameras that corrects drift from cameras alone by matching walls detected in its map to the floor plan, through a drift-aware policy. A multi-stage integration then turns each matched pair incrementally into a persistent correction, so the trajectory stays corrected and localized within the floor plan as it is built. MVP-SLAM was validated on the multi-floor construction sites of the Hilti-Trimble SLAM Challenge 2026, ranking 2nd of 22 teams in the Localization task (0.29 m mean RMSE) and 5th of 62 teams in the SLAM task (0.24 m), the top-ranked one in both tasks among those that operate online, integrate the floor plan, and localize within it.

0.16

Pixel-wise Geo-registration of Drone and Satellite Images

cs.CV ·2026-08-28 ·Qingyang Liu, David G Shatwell, Parth Parag Kulkarni, Mubarak Shah
benchmarkdataset similarity 0.64
Abstract

Pixel-level cross-view geo-registration aims to align a query image (e.g., drone) to a geo-referenced satellite map so that every query pixel can be mapped to real-world GPS coordinates. Despite strong progress in cross-view geo-localization, existing benchmarks largely provide only GPS labels, limiting evaluation to a single coordinate per image and leaving dense geodetic alignment underexplored. We introduce SkyReg, a dataset and standardized benchmark for pixel-level drone-to-satellite geo-registration, providing dense per-pixel geo-location supervision across diverse settings (orthographic and perspective), scene types (urban, landmark-centric, suburban/rural), and camera configurations. Using SkyReg, we evaluate a broad set of baselines spanning retrieval, feature matching, homography-based alignment, and feed-forward 3D reconstruction. Finally, cross-view pairs from SkyReg, we train a geometry-aware reconstruction pipeline that achieves state-of-the-art results,improving performance by a significant margin.

0.09

Facet-SLAM: Real-Time Triangle Splatting SLAM

cs.RO cs.CV ·2026-11-18 ·Edward Beng Wai Tan, Siew-Kei Lam
code/data similarity 0.63
Abstract

Dense SLAM systems based on 3D Gaussian splatting build maps that render photorealistically, but their surface geometry is poor, and obtaining a mesh requires extraction or fusion stages. Triangle splatting avoids this with surface primitives whose vertices can be triangulated directly into a connected mesh, yet SLAM with this representation has so far relied on photometric tracking, which is too slow for localization at sensor rate. We present Facet-SLAM, the first real-time triangle splatting SLAM system for RGB-D cameras. Fast geometric registration is the natural alternative, but it is not sufficient alone, since the mapper's optimization displaces triangles from the observed surface and makes them unreliable registration targets. We therefore separate the two roles: the tracker sets each triangle's centroid from fused depth and registers frames to these centroids by GICP, while the mapper is restricted to non-translating updates via a change of variables. Our system achieves competitive tracking accuracy at around 100 FPS on a desktop GPU and runs at sensor rate on a Jetson AGX Orin. Compared with the photometric approach, it is over 20 times faster, matches rendering quality, and improves surface accuracy, reducing the chamfer distance of the Delaunay mesh on Replica from 1.55 to 0.86 cm. We will release the implementation at https://github.com/edward62740/Facet-SLAM.

0.55