CS Paper Radar

Facet-SLAM: Real-Time Triangle Splatting SLAM

Edward Beng Wai Tan, Siew-Kei Lam

cs.RO cs.CV ·submitted 2026-11-18 06:23 UTC · v1
code/data

Abstract

Dense SLAM systems based on 3D Gaussian splatting build maps that render photorealistically, but their surface geometry is poor, and obtaining a mesh requires extraction or fusion stages. Triangle splatting avoids this with surface primitives whose vertices can be triangulated directly into a connected mesh, yet SLAM with this representation has so far relied on photometric tracking, which is too slow for localization at sensor rate. We present Facet-SLAM, the first real-time triangle splatting SLAM system for RGB-D cameras. Fast geometric registration is the natural alternative, but it is not sufficient alone, since the mapper's optimization displaces triangles from the observed surface and makes them unreliable registration targets. We therefore separate the two roles: the tracker sets each triangle's centroid from fused depth and registers frames to these centroids by GICP, while the mapper is restricted to non-translating updates via a change of variables. Our system achieves competitive tracking accuracy at around 100 FPS on a desktop GPU and runs at sensor rate on a Jetson AGX Orin. Compared with the photometric approach, it is over 20 times faster, matches rendering quality, and improves surface accuracy, reducing the chamfer distance of the Delaunay mesh on Replica from 1.55 to 0.86 cm. We will release the implementation at https://github.com/edward62740/Facet-SLAM.

Closest papers

Nearest neighbours by meaning across the whole index.

Dual Covariance Gaussian Splatting SLAM: Decoupling Rendering and Registration for Robust Real-Time Tracking

cs.RO cs.CV ·2026-09-22 ·Edward Beng Wai Tan, Siew-Kei Lam
similarity 0.74
Abstract

ICP-based 3D Gaussian Splatting (3DGS) SLAM tracks in real time by registering incoming frames against map Gaussians, using each primitive's covariance for both rendering and registration. These two uses place conflicting demands on one covariance. The mapper shapes it to minimize photometric error, often flattening it against surfaces, while robust registration typically benefits from measurement uncertainty. We propose a dual-covariance parameterization. Each Gaussian keeps a single mean but holds two covariances: a rendering covariance optimized by the mapper, and a tracking covariance derived from an RGB-D sensor noise model. We further use the tracking covariances as Gaussian anchors for image corners, providing constraints in directions where depth geometry is weak. We evaluate on TUM RGB-D, ScanNet, Replica, and two outdoor sequences recorded with a RealSense D435i on wheeled and handheld platforms. We achieve robust tracking performance across multiple scenes and reduced odometry drift, while tracking at $\sim$ 60 FPS.

0.32

LightSplat: Real-Time High-Fidelity 3D Gaussian SLAM with Loop Closure

cs.RO cs.CV ·2026-09-07 ·Junze Bao, Ye Gao, Yiming Huang, Xiaolong Yu, Chen Dong +3 more
published similarity 0.72
Abstract · Accepted to 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)

SLAM systems based on 3D Gaussian Splatting (3DGS) have recently demonstrated promising reconstruction accuracy for dense 3D scene representations. However, current 3DGS systems struggle to meet the strict demands of real-world deployments due to severe limitations in operational performance and map adaptability. To this end, we propose LightSplat, a hybrid-representation RGB-D SLAM framework. It synergizes local sparse features for robust and fast tracking with a dual-thread backend that progressively constructs dense Gaussian submaps. Crucially, we enable online loop closure through feature-accelerated 3DGS registration, refining overall map consistency through pose graph optimization. Ultimately, LightSplat achieves the online reconstruction of high-fidelity Gaussian map. Extensive experiments on multiple datasets and real-world robotic platform demonstrate that our method achieves near state-of-the-art reconstruction quality and the capability to accommodate practical camera motions, maintaining an average framerate of 8 FPS. Overall, LightSplat provides an efficient and robust foundation for deploying high-fidelity 3DGS in real-world environments.

0.30

Geometry-Aware Online Mapping for 3D Gaussian Splatting SLAM

cs.RO ·2026-08-14 ·Thai Luu, Quan Tran, Hieu Phan, Tuan Dang
top venuecode/data similarity 0.71
Abstract

Recent 3D Gaussian Splatting (3DGS) has enabled efficient photorealistic view synthesis and is rapidly being adopted in simultaneous localization and mapping (SLAM) systems for online mapping. In these systems, a Gaussian map must be expanded and refined incrementally while tracking runs in real time, so initialization and density control directly determine where limited computation and iterations are spent. This contrasts with offline 3DGS reconstruction, where such heuristics can be amortized over long optimization schedules. However, most 3DGS-SLAM pipelines inherit initialization and density-control heuristics from offline reconstruction, which can become brittle under the strict per-keyframe optimization budgets and incremental map growth of online SLAM. In this work, we revisit these heuristics in a decoupled 3DGS-SLAM setting and propose three geometry-aware methods that operate in the mapping thread: transmittance-preserving densification, camera-aware scale initialization from depth and intrinsics, and error-guided densification that focuses new primitives on high-residual regions. Our results show consistent improvements in rendering quality with negligible overhead, highlighting the coupling between photometric residuals and pose uncertainty in online SLAM. We will open-source our code to the community to foster growth and validate reproducibility.

0.52

LingGS: Decoupling Feed-Forward Geometry Prediction from Camera Tracking for High-Fidelity Gaussian SLAM

cs.CV cs.GR ·2026-10-27 ·Da Li, Yihan Zang, Ivan Viola, Zeyu Wang, Dominik Engel
similarity 0.70
Abstract · 10 pages, 4 figures

Achieving high-quality reconstruction and responsive camera tracking remains challenging for monocular RGB Gaussian splatting SLAM under a limited optimization budget. We present an online system that addresses this challenge by combining learned geometric priors with explicit geometric camera tracking, which can substantially outperform learned camera prediction in terms of tracking accuracy. A frozen streaming 3D foundation model serves as a virtual RGB-D sensor, providing depth estimation from monocular video. An explicit geometric solver then estimates camera motion through feature reprojection, and a streaming Gaussian mapper integrates the resulting observations into a dense scene representation. We further show that geometric tracking improves camera pose accuracy across representative streaming geometry backbones, demonstrating the broader applicability of our approach. Extensive experiments on indoor and outdoor datasets show that our method significantly improves reconstruction quality over existing approaches, achieving about 7 FPS on a single RTX 4090 and delivering 2-3 times the throughput of the evaluated prior SLAM systems.

0.18

Cube-Splat: High-Fidelity 360° Gaussian Splatting SLAM via Cubemap Factorization and Adjoint-Consistent Optimization

cs.CV ·2026-09-18 ·Xiangfei Guo, Hao Shi, Yufan Zhang, Zhonghua Yi, Yongqi Mao +2 more
top venuecode/data similarity 0.70
Abstract · Accepted to ECCV 2026. Source code : https://github.com/guoxf304/CubeSplat

Recent progress in 3D Gaussian Splatting (3DGS) has enabled dense visual SLAM with pinhole cameras, yet most pipelines are not designed for panoramic imagery. We present Cube-Splat, the first panoramic GS-SLAM framework that factorizes each 360° frame into a cubemap of four fixed-orientation virtual pinhole views sharing a single optical center. By designating the front face as the primary pose state, we accumulate gradients from all faces via an adjoint mapping, thereby enabling multi-face observations to coherently update a single state while strictly preserving cross-view geometric consistency. Concurrently, our mapping module densifies and optimizes anisotropic Gaussians using aggregated cubemap rays for high-fidelity, dense reconstruction. Furthermore, to rigorously evaluate panoramic SLAM under diverse and challenging conditions, we introduce SynPano, a highly scalable, photorealistic synthetic dataset featuring parameterized complex trajectories and multi-modal ground truth. Extensive evaluations on two public benchmarks (PALVIO and OmniBlender) and our SynPano dataset, collectively encompassing both indoor and outdoor scenes, demonstrate that Cube-Splat achieves state-of-the-art (SOTA) performance in tracking accuracy and reconstruction fidelity. Both the source code and the SynPano dataset are available at https://github.com/guoxf304/CubeSplat.

0.71

PanoGS-SLAM: Panoramic 3D Gaussian Splatting SLAM

cs.CV ·2026-09-15 ·Yongqi Mao, Hao Shi, Yufan Zhang, Zhonghua Yi, Xiangfei Guo +1 more
code/data similarity 0.69
Abstract

Real-time dense SLAM is a core capability for robotics applications that require robust localization and high- quality mapping in dynamic or fast-changing environments. Recent 3D Gaussian Splatting (3DGS)-based SLAM methods have shown promising performance, but most are designed for narrow-FoV pinhole cameras, where limited angular coverage weakens pose observability and often leads to unstable photo- metric optimization under rapid motion and large viewpoint changes. We present PanoGS-SLAM, the first panoramic dense SLAM system built on 3D Gaussian Splatting. Our method per- forms differentiable rendering and pose optimization directly in the spherical domain, enabling omnidirectional photometric constraints for more stable tracking. To improve geometric consistency and robustness, we introduce (1) a sphere-consistent photometric loss that compensates for the area distortion of equirectangular projection, and (2) a depth-guided Gaussian initialization strategy that stabilizes incremental mapping in newly observed regions. Extensive experiments on both real and synthetic panoramic benchmarks (PALVIO and SynPano) show that PanoGS-SLAM consistently outperforms geometric and GS-based baselines in tracking accuracy and rendering quality, while achieving fast front-end convergence and real-time perfor- mance. In addition, controlled field-of-view experiments reveal a clear monotonic improvement in optimization conditioning and convergence stability as angular coverage increases, high- lighting the fundamental role of sensing geometry in shaping the optimization landscape of differentiable Gaussian-based SLAM. The source code will be made publicly available.

0.53

DPGS-SLAM: Diffusion-Prior and Provenance-Aware Monocular Gaussian Splatting SLAM for Dynamic Visual Sensing

cs.RO cs.CV ·2026-11-09 ·Yifan Luo, Takafumi Matsumaru, Vibekananda Dutta, Xin He
similarity 0.69
Abstract

This paper presents DPGS-SLAM (Diffusion-Prior and Provenance-Aware Monocular Gaussian Splatting SLAM) for dense mapping in environments containing dynamic objects. Objects in dynamic motion remain a significant challenge for dense visual SLAM since dynamic observations can contaminate camera tracking and scene reconstruction. Although 3DGS (3D Gaussian splatting) enables efficient dense mapping, existing 3DGS-SLAM systems may exhibit instability when dynamic objects violate their underlying static-scene assumption. Excluding dynamic observations can reduce their influence on tracking and mapping, but may leave occluded static backgrounds missing or weakly constrained. Our proposed DPGS-SLAM is a monocular RGB SLAM framework that supports provisional representations of insufficiently observed static backgrounds through asynchronous diffusion-based background completion and provenance-aware Gaussian mapping. Dynamic regions are identified through optical-flow-based motion discovery and temporally consistent mask propagation by SAM2. For selected keyframes, a fine-tuned diffusion inpainting model generates plausible background appearance in occluded regions, while metric depth predicted from completed images initializes provisional Gaussian primitives. Provenance labels distinguish generated primitives from observation-supported primitives, excluding generated content from camera-pose estimation and observed-map optimization. When previously occluded backgrounds become visible, eligible generated primitives are removed, and observation-supported primitives are independently initialized from real RGB observations and predicted depth. Experimental results demonstrated competitive camera tracking, with average ATE RMSE values of 1.2 cm on TUM RGB-D and 2.7 cm on BONN RGB-D datasets. On StaDy4D, DPGS-SLAM improved average PSNR by 4.60 dB over WildGS-SLAM using only monocular RGB input.

0.12

GEMOR-GS: Global Extrinsic-calibration-refined Mapping and Online Relocalization for 3D Gaussian-Splatting SLAM

cs.RO cs.CV ·2026-11-10 ·Yuchen Yang, Ming Ding, Xinyu Wu, Hesheng Wang
similarity 0.66
Abstract

Photorealistic and metrically consistent world representations are a primary requirement for LiDAR--inertial--visual SLAM systems that serve robots over continuous operation. 3D Gaussian splatting makes such representations attainable by supplying an explicit, renderable, and queryable scene model. We present GEMOR-GS (Global Extrinsic-calibration-refined Mapping and Online Relocalization for 3D Gaussian-Splatting SLAM) to make the Gaussian map geometrically accurate, globally refined, and re-enterable, providing a better appearance for robot perception and decision-making. To improve the 3DGS map, the LiDAR--camera extrinsic is first estimated offline by direct-method alignment over dedicated calibration segments and reused by all following online and offline processes. Under the calibrated geometry, keyframe poses and Gaussian parameters are refined alternately under a gated differentiable-rendering and LiDAR--projection objective. The final global reconstruction is then rebuilt from the refined keyframe schema with all online constraints lifted. For the robot SLAM lifecycle, the method recovers the pose from the 3DGS map after tracking loss through an XFeat bypass map, RANSAC-PnP coarse localization, and Gaussian RGB-D warp refinement. Experiments on one self-collected and five public sequences quantify each element: the offline reconstruction wins all paired keyframes against the online map by 14.3--19.9 dB, improves PSNR by approximately 9 dB over Gaussian-LIC2, and achieves 86--100% held-out relocalization success tied to extrinsic quality. The results show that GEMOR-GS improves the geometric accuracy, appearance fidelity, and re-enterability of the 3DGS map, serving as a dependable robot world model for SLAM and downstream tasks.

0.12