CS Paper Radar

TinyFlow: Breaking the Warping Bottleneck for Edge Optical Flow

Xiao'ao Song, Chahat Deep Singh

cs.RO cs.CV ·submitted 2026-10-23 22:21 UTC · v1

Abstract

High-performance optical flow networks are difficult to deploy on resource-constrained edge accelerators because their iterative refinement warps features by the current flow, which relies on flow-dependent resampling and data-dependent memory access. We present TinyFlow, a 1.26M-parameter warp-free optical flow network that preserves iterative coarse-to-fine refinement by replacing the warp with a fixed-window correlation over constant offsets, so the whole network compiles as a single static INT8 graph. Quantization-aware fine-tuning, warp-teacher distillation, and model souping reduce the Float32-to-INT8 penalty to below 0.2 end-point error (EPE) on MPI-Sintel. TinyFlow outperforms EdgeFlowNet and NanoFlowNet on Sintel Clean, Sintel Final, and FlyingChairs in both Float32 and INT8, while using 54% fewer parameters than EdgeFlowNet, and our INT8 model achieves 6.29/7.13 EPE on Sintel Clean/Final. In flow-only monocular visual odometry on TartanAir and UZH-FPV, the same INT8 model yields the lowest trajectory error on seven of eleven sequences.

Comment
9 Pages, 5 Figures, 4 Tables

Closest papers

Nearest neighbours by meaning across the whole index.

MCUFlowNet: Hardware-Aware Neural Architecture Search for Optical Flow on Microcontrollers

cs.CV cs.AR ·2026-11-05 ·Enmin Lin, Jona Beysens
code/data similarity 0.68
Abstract · Submitted to IEEE ISCAS 2027 (under review). 5 pages

Dense optical flow allows small drones to avoid obstacles. However, few dense optical flow networks are designed for microcontrollers (MCUs) with neural accelerators, whose on-chip SRAM limits the input resolution. We present PACE-NAS, a macro-to-micro neural architecture search framework that decouples memory from latency: a macro design fixes the backbone and its peak SRAM, and a micro design searches operators and depths to trade accuracy against compiler-estimated latency. We apply it to EdgeFlowNet on a Grove Vision AI V2 board (Ethos-U55), where profiling locates the peak SRAM at the full-resolution output head. Replacing transposed convolutions with bilinear upsampling and convolutions lowers the peak SRAM by 18%, and two lightweight context modules lower the endpoint error (EPE) without raising the peak. All searched subnets share this peak, so the search needs no memory constraint. We name the Pareto-optimal models MCUFlowNet; the fastest variant, MCUFlowNet-S, runs 1.76x faster than a retrained EdgeFlowNet at a 1.6% higher EPE and, in simulated forest flights at 2 m/s, reaches the goal without collision in 51.5% of trials, against 41.8%. PACE-NAS also applies to semantic segmentation, where a searched PIDNet-S variant runs 1.17x faster at similar accuracy. Code is available at https://gitlab.kuleuven.be/emedia-research-lab/esat-stadius/mcuflownet/mcuflownet.

0.32

RAMP: Robust Adaptive Mixed-Precision Quantization for Edge CPU Vision Models

cs.CV cs.LGcs.PF ·2026-09-23 ·David Población-Criado, Dario Garcia-Gasulla, Eduardo Quinones
publishedcode/data similarity 0.65
Abstract · Accepted at the 37th British Machine Vision Conference (BMVC) 2026. 13 pages, 4 figures, 2 tables. Code available at https://github.com/davi…

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of $1.81\times$ over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

0.51

FreeFlow: A Bias-free Hierarchical Transformer for Optical Flow Estimation

cs.CV ·2026-09-10 ·Vladislav Bargatin, Alexander Yakovenko, Khaled Abud, Dmitriy Vatolin
top venuecode/data similarity 0.64
Abstract · Accepted at ECCV 2026. Project page: https://github.com/msu-video-group/freeflow

Optical flow methods typically rely on task-specific inductive biases, such as correlation volumes, feature warping, and iterative refinement, among others, to reach high accuracy. While effective, such biases constrain the model to predefined heuristics, which can limit its expressivity and lead to more complex pipelines and additional computational cost. We present FreeFlow, a hierarchical transformer built without any flow-specific components, using instead a single feed-forward encoder--decoder. FreeFlow combines three attention variants: window attention for local processing, shifted-window attention for cross-window information exchange, and a global attention operating at a reduced resolution. The resulting architecture scales naturally with model capacity, enabling a consistent accuracy gain from small to large variants. Despite the absence of standard inductive biases, FreeFlow achieves state-of-the-art results on major benchmarks, including Sintel (0.68/1.48 EPE on Clean/Final), KITTI-2015 (3.23 Fl-all), and Spring (3.192 1px), while remaining memory efficient at 1080p inference.

0.47

CHARMING: Parallel Edge AI Acceleration Across Tensor Processing and In-Memory Computation

cs.AR ·2026-11-13 ·Md Omar Faruque, Jingang Jin, João Paulo C. de Lima, Shouzhi Fang, William C. Tegge +3 more
similarity 0.63
Abstract

Edge AI increasingly relies on specialized accelerators for low-latency inference under tight resource and energy constraints, yet their efficiency remains limited by data movement. Prior work, CHARM, mitigates this overhead by overlapping data movement with computation. We observe that in-memory computing can further supplement tensor processing as a parallel accelerator while eliminating certain data movements entirely. We present CHARMING, a heterogeneous edge AI architecture that uses accuracy- and quantization-aware partitioning to distribute and concurrently execute inference workloads across tensor processing and in-memory computation. CHARMING partitions attention heads between an AIE array and an in-DRAM compute unit, balancing execution according to model architecture, sequence length, and precision while selecting heads to minimize accuracy degradation. CHARMING also integrates quantization into the AIE projection stage to further reduce data movement. We validate CHARMING end-to-end in hardware on AMD Versal VCK5000 and Alveo U200 platforms and evaluate LLM and video-generation models across multiple precisions using measured hardware results and simulation of the latest in-memory compute hardware. CHARMING improves prefill performance by up to 23.6 percent and decode performance by up to 44 percent over AIE-only acceleration. With int4 x int4 fixed-point in-memory computation, CHARMING reduces per-layer energy by up to 7.6 percent and improves energy-delay product by up to 24.7 percent, while maintaining accuracy similar to a 32-bit floating-point baseline.

0.19

Foundation Model Driven Optical Flow

cs.CV cs.RO ·2026-10-19 ·Praroop Chanda, Suryansh Kumar
publishedcode/data similarity 0.63
Abstract · 19-pages, 5 figures, 16 tables. Accepted for publication at 40th Conference on Neural Information Processing Systems (NeurIPS 2026). Worksho…

We investigate how frozen pretrained visual and depth representations support dense optical flow when coupled with a supervised matching network. Building on TTSFlow, this paper studies Dense Prediction Transformer (DPT) feature decoding and one coarse-to-fine refinement stage. Our method fuses features from frozen DINOv2 and Depth Anything V2 models and estimates optical flow through a trainable transformer-based matching pipeline. After optical-flow training on FlyingChairs and FlyingThings3D, it achieves 2.37 endpoint error (EPE) on the Sintel training split, Final pass, compared with 2.52 for the FlowSeek (T) configuration reported here. Our RoCo-Spring 2026 entry, RoCo-29.VSAI, obtains a robustness-balanced score of 1.1038, Spring EPE of 1.411, and RobustSpring proxy EPE of 4.739, with a lower balanced score than seven of the twelve listed reference baselines. These results characterize the complete pipeline, which reuses frozen foundation backbones and performs one refinement stage. Code is available at: \url{https://github.com/Visual-and-Spatial-AI-Lab/FFlow}

0.36

Accelerating Data Preprocessing for Efficient Vision Model Inference on Jetson Edge Device

cs.PF ·2026-08-27 ·Tian Chen, Nawras Alnaasan, Jinghan Yao, Aamir Shafi, Hari Subramoni +2 more
similarity 0.62
Abstract

Data preprocessing is a crucial part of deep learning workflows on edge devices. However, decoding data saved in JPEG format is very compute-intensive and occupies a major portion of the preprocessing pipeline. Therefore, increasing the decoding speed is vital for improving overall throughput, especially for inputs with large image sizes, which are often subject to preprocessing bottlenecks. On the other hand, edge devices are equipped with specialized hardware units to accelerate media processing and image decoding. For instance, the NVIDIA Jetson platform possesses a dedicated NVJPEG unit. These units can be used to enhance the performance of the preprocessing pipeline. This paper introduces the utilization of such specific hardware acceleration units for offloading decoding tasks. By combining this with a multi-instance approach, it allows for the parallelization of all compute resources including CPU, NVJPEG, GPU, and DLA in Jetson devices. In this work, we compare various potential pipeline designs. On ResNet18, ResNet50, and ResNet152, three models with different sizes, we evaluate the impact of batch sizes and image sizes, as well as the characteristics of GPU/DLA inference. Finally, a fine-tuning experiment for multi-instance design has been conducted. The multi-instance design with a specific hardware decoding unit involved offers up to 30.02% speedup for large image sizes, compared with the most optimized design without it. Based on these findings, we demonstrate the benefits of using the NVJPEG unit in deep learning workflows and provide guidelines for tuning and optimizing edge inference workflows.

0.10

ShiftQAT: Quantization-Aware Training for the Numerical Contract of a Fixed-Function Edge CNN Accelerator

cs.LG ·2026-10-15 ·Oguzhan Buyuksolak, Osman Erman Okman, Mehmet Gorkem Ulkar
code/data similarity 0.62
Abstract

Fixed-function CNN accelerators make edge inference fast and energy-efficient, but they execute only networks that obey a precise numerical contract. On the MAX7800x family, this contract requires power-of-two, per-tensor, symmetric scales, 8-bit activations and biases, integer-only arithmetic, and one statically configured shift per layer. We present ShiftQAT, the quantization-aware training (QAT) flow we developed for this family, which produces networks satisfying the contract by construction. It is the default training path of ai8x-training, the family's open-source training toolchain. ShiftQAT resolves residual, concatenation, and weight-sharing dependencies so that activation scales propagate statically and each layer's requantization reduces to one offline-configured shift. It also trains weights and biases on a joint power-of-two grid that fits the 8-bit bias budget. Among the compared methods, only ShiftQAT satisfies all of the contract's scaling constraints, including signed 8-bit activation storage. Even so, on ImageNet it matches the W8A8 accuracy drop of less constrained QAT methods and stays within 2.9 percentage points of FP32 at W4A8. On MAX78002 silicon, ShiftQAT-trained MobileNetV2 and ResNet-18 classify ImageNet images in 14.6 and 8.4 ms at 5.1 and 2.8 mJ per inference.

0.20

ZTA-Q: an Open-source RISC-V Platform for Accurate Quantized CNN Inference

cs.AR ·2026-10-01 ·Yike Li, Ajay Kumar M, Vishnu PS, Dimitrios S. Nikolopoulos, Bo Ji +2 more
publishedcode/data similarity 0.62
Abstract · Accepted for publication at the 2026 IEEE 33rd International Conference on Electronics, Circuits and Systems (ICECS)

Low-precision inference is widely adopted in edge AI to reduce computational cost and memory footprint. However, existing open-source accelerator platforms provide limited end-to-end support for CNNs following the standard TensorFlow Lite integer inference scheme. This paper presents ZTA-Q, an open-source RISC-V-based platform that enables accurate deployment of TensorFlow Lite INT8 models. In addition to extending operator support, ZTA-Q provides a configurable post-processing datapath for studying how circuit-level approximations, including reduced multiplier precision, shared shift scaling, and simplified rounding, affect model accuracy. The proposed system is implemented on a Digilent Arty A7-100T FPGA and operates at 83.3 MHz. Evaluations on representative CNN models show that with LUT, register, and DSP overheads of 26.3%, 12.6%, and 150%, respectively, ZTA-Q limits the degradation in both top-1 and top-5 accuracy to within 0.25 percentage points.

0.35