CS Paper Radar

Extended Target Imaging in Non-Ideal Distributed ISAC Systems: A Hierarchical Off-Grid Approach

Xin Tong, Yu Ge, Alireza Pourafzal, Dario Tagliaferri, Henk Wymeersch

eess.SP ·submitted 2026-10-24 07:05 UTC · v1

Abstract

In future integrated sensing and communication (ISAC) systems, distributed multiple-input multiple-output (MIMO) architectures offer high-resolution imaging capabilities. However, reconstructing real-world extended targets is physically challenging due to continuous anisotropic surface scattering and complex occlusions, especially in the presence of system synchronization errors. To overcome these limitations, this paper proposes a hierarchical two-stage computational imaging framework for extended target reconstruction. In Phase I, an incoherent coarse imaging process is performed to serve as a reliable initializer for subsequent high-resolution coherent image generation. By performing line-of-sight (LOS) interference suppression and leveraging network-wide topological constraints, timing and phase offsets are calibrated. This enables image construction by back-projection (BP) and the coarse identification of target contours using the probabilistic Hough transform (PHT). In Phase II, a joint target position and orientation off-grid compensation model is established, capturing Lambertian diffuse and specular reflections on continuous facets via a first-order Taylor expansion. To tackle severe occlusion and spatial grid mismatches, we propose the bilinear off-grid approximate message passing (BiOG-AMP) algorithm. BiOG-AMP iteratively updates surface visibility and dictionary matrices, enforcing physical consistency across distributed transceiver views. Theoretical analysis derives compressed sensing error bounds, Fisher information limits, and linearization error scaling. Simulation results demonstrate that the proposed framework effectively eliminates imaging artifacts and exhibits superior robustness against synchronization offsets and grid mismatches compared to state-of-the-art baselines.

Comment
under review in IEEE Transactions on Wireless Communications

Closest papers

Nearest neighbours by meaning across the whole index.

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

eess.SP ·2026-10-12 ·Zhenkun Zhang, Cunhua Pan, Hong Ren, Jun Tang, Dongming Wang +1 more
theory similarity 0.60
Abstract

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

0.12

UAV SAR Imaging via Diffusion Posterior Sampling under Non-Ideal Motion in ISAC Systems

eess.SP cs.IT ·2026-10-10 ·Keying Zhu, Le Liang, Jie Yang, Fan Liu, Shi Jin
similarity 0.59
Abstract

Unmanned aerial vehicle-enabled synthetic aperture radar (SAR) offers significant potential for providing communication services to ground users while sensing the surrounding environment in low-altitude integrated sensing and communication (ISAC) systems. However, its practical deployment is challenged by known non-ULM trajectories and unknown position errors, which violate conventional SAR assumptions and cause severe image defocusing. We address these non-ideal impacts by formulating the ISAC SAR imaging as an exact linear inverse problem to accurately model arbitrary trajectories with multiple-input multiple-output orthogonal frequency division multiplexing waveforms. Based on this formulation, we develop a diffusion posterior sampling (DPS)-based super-resolution SAR framework, where a pre-trained diffusion model provides a data-driven image prior and the exact physical model enforces measurement consistency during posterior inference. The inference process is further accelerated for practical implementation. For unknown position errors, we develop a joint iterative DPS and motion compensation (MoCo) optimization algorithm with discrete cosine transform reparameterization and coarse-to-fine spectral scheduling. Simulations demonstrate that our framework achieves high-accuracy reconstruction across diverse trajectories and remarkable super-resolution, maintaining greater than 21.3 dB peak signal-to-noise ratio (PSNR) even under half physical resolution truncation. Under unknown motion errors, the joint DPS and MoCo algorithm achieves 23.65 dB PSNR with a residual position-error estimation error of 0.19 cm.

0.25

Intrinsic Scatterer Representation for Forward Scattering Modeling of Complex Radar Targets

eess.SP ·2026-08-31 ·Ziyu Yue, Feng Xu
similarity 0.57
Abstract

Forward modeling of scattering centers of radar targets is critical for advanced information retrieval of Synthetic Aperture Radar (SAR) images. Existing forward modeling approaches rely on meshing the target and computing scattering via ray-tracing techniques, which not only incur high computational cost but also discard the semantic information of target geometry, thereby limiting the interpretability of SAR imagery. To address these issues, this paper proposes a novel forward scattering modeling framework that directly constructs stable, compact, and physically meaningful scatterers from target geometry. This formulation decouples target representation from specific observation configurations, enabling an intrinsic scatterer description across varying viewing angles. Specifically, an improved Random Sample Consensus (RANSAC) scheme is first developed to robustly extract planes, cylinders, and spheres from target point clouds, yielding single-bounce scatterers. Potential multiple-bounce scatterers are then automatically detected by analyzing inter-primitive relations, and further refined through geometric clipping and parameter alignment to produce unique scattering representations compatible with canonical scattering center models. Finally, radar responses and SAR images can be generated under arbitrary observation configurations based on the constructed scatterers. The proposed method is validated through extensive experiments, including comparisons with electromagnetic simulations and measured data. The results show that it can accurately characterize the scattering behaviors of complex targets, providing an efficient, interpretable, and reliable solution for SAR image modeling and understanding.

0.21

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.57
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

Bistatic UAV-Based 3D SAR Imaging Using Integrated Sensing and Communications Transceivers

eess.SP ·2026-11-09 ·Akanksha Sneh, Krishna Ayyagari, Vivaswan Nawani, Shobha Sundar Ram
similarity 0.56
Abstract

Integrated sensing and communication (ISAC) frameworks enable autonomous systems to jointly perform radar sensing and wireless communication using common spectral and hardware resources. Prior art on ISAC-enabled UAV for SAR focused on monostatic configurations for two-dimensional target imaging. In this work, we propose a bistatic UAV tomographic SAR framework in which the IEEE~802.11ad waveform, RF hardware, and spectral resources are jointly utilized for communication and radar sensing for three-dimensional (3D) localization of complex targets. Specifically, we demonstrate how communication packets transmitted from a master ISAC transceiver UAV to a passive receiver UAV are exploited for timing and frequency synchronization, motion compensation, and 3D localization of targets, without requiring auxiliary infrastructure on the passive receiver for these tasks. We evaluate the proposed framework for localizing automotive targets over elevated terrain, with Monte Carlo simulations modeling synchronization and platform motion errors. The results demonstrate improved localization accuracy compared with conventional InSAR-based localization. The interplay between radar and communication performances are further evaluated using diverse modulation schemes.

0.11

Learning Nonlinear Waveform Fusion Across Scales for Integrated Sensing and Communication

cs.AI ·2026-10-23 ·Jiayu Liu, Kai Wan, Shuo Shao, Giuseppe Caire
similarity 0.56
Abstract

Fixed source superposition and frequency partitioning constrain how communication content interacts with a probing reference in integrated sensing and communication (ISAC). We learn nonlinear waveform fusion across scales for image transmission and localization of multiple targets in range and angle. Reception uses the information available at each end. Adaptive temporal feature weighting and spectral updates combine image features and a deterministic linearly frequency-modulated reference in a shared complex state, generating a waveform with fixed total energy over the array frame. At the user equipment (UE), the reference and channel state information condition a neural demixer for image reconstruction. At the base station, the realized transmit pulse defines a coherent dictionary for sequential localization with learned local correction, physical refinement, and residual updates. We compare the proposed waveforms with superposition in the time domain and learned spectral linear fusion on 512 independent test images, using a shared fixed UE receiver and a baseline sensing receiver using coherent peak search. Averaged across eleven task weights, the proposed waveforms reduce normalized localization error by 29.0\% and 27.0\%, respectively, while increasing mean peak signal-to-noise ratio by 1.40 and 0.82~dB. With the proposed waveforms fixed, learned local correction reduces mean normalized localization error by 12.2\% relative to the same sequential receiver without learned correction.

0.20

Joint Antenna Position and Beamforming Optimization for Movable Antenna Enabled Near-Field ISAC Imaging

eess.SP ·2026-10-28 ·Luis Ebner, Alireza Navi, Mohamed-Amine Lahmeri, Sebastian Lotter, Lutz Lampe +1 more
similarity 0.56
Abstract

Near-field (NF) integrated sensing and communication (ISAC) systems enable simultaneous two-dimensional (2D) radar imaging and multi-user downlink communication. However, fixed-position antenna arrays can exhibit high sidelobes in the point spread function (PSF), which degrade imaging performance and cause ghost-target artifacts. Movable antennas (MAs) offer additional spatial degrees of freedom to suppress these sidelobes while meeting communication requirements, without increasing the number of antenna elements. In this paper, we investigate MA-enabled NF ISAC by jointly optimizing the transmit and receive antenna positions and the transmit beamforming to minimize a weighted sum of the integrated sidelobe level (ISL) and peak sidelobe level (PSL) of the 2D PSF, subject to communication-rate, illumination-power, transmit-power, and antenna-placement constraints. To tackle the resulting non-convex problem, we propose a hybrid alternating optimization (AO) framework that combines particle swarm optimization with a genetic algorithm. Our numerical results demonstrate that the proposed scheme achieves the lowest ISL among the considered array configurations and reduces the PSL by at least 5 dB compared with the benchmarks. The optimized array is further shown to resolve two closely spaced targets whose reflectivities differ by 6dB, outperforming random, Mills Cross, and rectangular arrays while satisfying the imposed minimum user-throughput requirements.

0.11

Development of Different Algorithms for Drone-Based Antenna Measurement Systems and Near-Field Error Analysis

eess.SP ·2026-08-17 ·Simranjit Singh, Jaswant Sharma, Jigar M. Pandya
similarity 0.56
Abstract · 4 pages, 3 figures, Manuscript submitted to IEEE MAPCON 2026

Near-field antenna measurements underpin the characterization of electrically large apertures, yet the fidelity of the Near-Field to Far-Field (NF-FF) transformation depends on the reconstruction algorithm's assumptions and robustness to real-world imperfections, including those from drone-based scanning platforms. Classical FFT-based modal expansion is efficient on uniformly sampled canonical grids but fails when phase-coherent acquisition cannot be maintained. We address this via a phaseless NF-FF algorithm reconstructing the far field from amplitude-only data through iterative phase retrieval. When sampling becomes sparse or irregular, even amplitude-based methods break down, motivating the $\textbf{Adaptive Sparse Inverse Radiation Estimator (ASPIRE)}$, a full-complex inverse source framework that solves a Method-of-Moments problem over RWG basis functions via cascaded rSVD and regularized shrinkage. Mutual coupling between basis functions is explicitly resolved, improving reconstruction fidelity beyond coupling-agnostic inverse-source formulations. The solver is accelerated via a Multilevel Fast Multipole Method engine with Numba just-in-time compilation, achieving a $1.2\times$ reduction in matrix-vector product time and up to $15\times$ lower memory usage relative to dense evaluation at N=100K. Across frequency bands and positioning/truncation error scenarios, the pipeline sustains algorithmic stability and achieves sub-degree beamwidth reconstruction error. These results establish an error-aware framework for algorithm selection across fixed and drone-based near-field measurement platforms.

0.26