CS Paper Radar

Cross-View and Cross-Time Tracking of Crack Evolution in Concrete

Pengru Deng, Jiapeng Yao, Su Wang, Xuhui He, Zhao Wang, Takanori Emaru, Takashi Matsumoto, Xinrun Li

eess.IV cs.CV ·submitted 2026-10-24 09:06 UTC · v1

Abstract

Crack propagation provides richer information than static crack observations for evaluating structural conditions of concrete infrastructure and planning maintenance strategies. Unlike static crack detection, which can now be largely automated using computer vision, vision-based crack tracking is a coupled cross-view and cross-time problem: the same physical crack must retain its identity as camera viewpoints change, while newly developed growth must be distinguished from existing crack segments in a unified reference view. Existing segmentation and 3D reconstruction methods can recover crack masks or scene geometry, but they do not preserve crack identity across views or quantify temporal extension. To address this gap, this study formulates crack growth monitoring as a cross-view and cross-time crack-instance tracking task and proposes a geometry-assisted, morphology-aware framework. The framework first uses image-based geometric registration to align observations from different viewpoints into a shared structural reference, then applies morphology-aware instantiation to assign physically interpretable crack identities, and finally performs temporal mapping in the unified view to distinguish newly developed growth from existing crack segments. To enable evaluation, a temporally annotated dataset was established and used, covering three representative cracking scenarios: single dominant crack propagation, mixed-mode branching, and multiple-crack interaction, with pixel-level masks and cross-time instance labels. Experimental results show that the proposed framework can establish loose cross-view identity correspondence under changing viewpoints, while strict spatial overlap and growth localization remain limited by early micro-crack segmentability and projection drift, highlighting directions for future crack-monitoring research.

Comment
50 pages. Author manuscript

Closest papers

Nearest neighbours by meaning across the whole index.

Inspect Any Crack: An Automated End-to-End Crack Segmentation and Severity Assessment Framework

cs.CE ·2026-10-09 ·Ghodsiyeh Rostami, Po-Han Chen, Mahdi S. Hosseini
similarity 0.63
Abstract

Image-based crack analysis is essential for automated infrastructure inspection to reduce the cost, subjectivity, and safety risks of manual surveys. Despite advances in visual crack detection, methods that translate predictions into physically meaningful and engineering-interpretable crack condition information remain limited. To bridge this gap, this study proposes Inspect Any Crack (IAC), an innovative end-to-end crack recognition and condition assessment framework that automatically derives physical geometric measurements and continuous severity scores from concrete-crack imagery. At its core, IAC introduces SACv2-Tiny, an efficient crack segmentation model adapted from a vision foundation model. Trained on the challenging OmniCrack30K dataset, SACv2-Tiny achieved a $62.49\%$ F1-score and $45.45\%$ IoU on the test set and a mean zero-shot F1-score of $69.89\%$ across three unseen datasets, demonstrating robust segmentation that enables downstream analysis with limited post-processing. IAC further processes the predicted masks to quantify physical crack width and affected area using ground-sampling-distance calibration. Validation at 41 caliper-referenced locations yielded a mean relative width error of $7.33\%$. Beyond geometric quantification, IAC introduces a novel continuous crack-condition metric, the Crack Severity Index (CSI), bounded on $[0,100]$, which combines maximum crack width and affected-area ratio into a unified, standards-informed severity measure. Through these developments, IAC advances crack inspection beyond pixel-level recognition toward interpretable and automated infrastructure condition assessment.

0.13

Evaluation of AI-based Visual Crack Detection in Steel Bridges Using Probability of Detection

cs.CV ·2026-08-18 ·Andrii Kompanets, Finn Michael Sherry, Remco Duits, Davide Leonetti, H. H. Snijder
unusual similarity 0.60
Abstract · Submitted

Bridge structures are regularly inspected for structural damage such as cracks and corrosion in order to ensure public safety and reduce maintenance costs. Much research has been done on automating this process using computer vision methods, which are often evaluated and compared using metrics such as intersection over union, mean average precision, etc. However, predicting the actual effectiveness of an inspection method within the field of structural engineering from these metrics remains challenging. To enable the systematic use of these increasingly popular methods in engineering practice, evaluating the performance of these methods in a way that is compatible with standard engineering approaches is therefore an urgent necessity. We present a new statistical evaluation framework to allow the comparison of computer vision methods with conventional visual inspection for crack detection in steel bridges. The framework is based on probability of detection curves and can account for the influence of image resolution. We apply this evaluation method to the real-world ``Cracks in Steel Bridges'' dataset, which contains annotated images of cracks in bridge structures. The quantification of the probability of detection and its uncertainty enables a practical assessment of the effect of automated methods for damage detection in structural reliability analyses. In turn, this enables the wide-spread use of automated (AI-based) damage detection in safety critical applications. This evaluation method provides evidence that the proposed computer vision approach approach is robust for the crack detection task and can have a high added value as an addition to conventional visual inspection methods.

0.48

3D Point Cloud from Close-Range Photogrammetry for Defect Characterisation of Rubberised Concrete

cs.CV ·2026-08-21 ·Jiacheng Liu, Mohammed Alnahhal, Ailar Hajimohammadi, Sara Gonizzi Barsanti, Jinling Wang +1 more
published similarity 0.57
Abstract · 8 pages, 10 figures. Published in the International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XXV ISP…

While three-dimensional (3D) point clouds are widely used in civil engineering, mainstream LiDAR systems such as Terrestrial Laser Scanning (TLS) are physically constrained to laboratory environments. Since their laser spot size typically exceeds the width of microcracks, the beam physically bridges over voids, rendering TLS unsuitable for fine-scale defect analysis. Alternatively, close-range photogrammetry utilising Structure-from-Motion (SfM) and Multi-View Stereo (MVS) algorithms offers a solution for testing highly tortuous materials, and its utility at fine-scale remains underexplored. This study adapts photogrammetric workflows specifically for rubberised concrete (RuC), a sustainable composite exhibiting high ductility and complex fracture morphologies. High-resolution image sets were captured using a Canon DSLR and an iPhone 16 to generate dense 3D models. Comparisons revealed that the DSLR-based reconstruction achieved sub-millimetre resolution, demonstrating superior performance for fine-scale surface monitoring. An RGB-guided crack extraction method was developed to enhance the identification of surface defects and isolate potential crack areas from the background. The extracted crack regions were visually distinguishable and provided a well-structured geometrical representation of defect morphology. Furthermore, a Pre and Post-Test deformation analysis was conducted to quantify surface displacement across testing stages. The results confirm that this close-range photogrammetry workflow is a flexible, high-resolution alternative to LiDAR for surface inspection and deformation monitoring of specimens in laboratory settings. Ultimately, this approach establishes a robust geometric baseline for future automated 3D feature characterisation and material performance evaluation.

0.62

Morphology-Decoupled Segmentation for Multiple Tunnel Defects Under Complex Environments

cs.CV cs.AI ·2026-11-15 ·Mohan Ren, Hang Li, Yifei Liu, Shaowei Wang, James O'Kane +5 more
similarity 0.56
Abstract · 16 pages, 7 figures

Automated tunnel-lining inspection must segment different defect geometries: cracks are thin, elongated, and connectivity-sensitive, whereas leakage, lining falling off, and segment damage are spatially extensive and context-dependent. Existing approaches generally apply a common decoder across defect classes or introduce boundary, topology, and directional mechanisms as isolated enhancements. This paper introduces Morphology-Decoupled Segmentation (MDS), in which defect morphology becomes the organising principle for feature routing, decoding, and interaction. A supervised routing module partitions multiscale encoder features into complementary linear and areal streams. The linear stream employs Deformable Strip Attention with image-conditioned direction hypotheses to preserve crack continuity without assuming fixed horizontal or vertical orientations, while the areal stream combines Pyramid Pooling with feature-pyramid fusion to capture diffuse boundaries and regional context. The representations are coupled through gated cross-morphology attention, allowing complementary information exchange while retaining morphology-specific features. A resolution-adaptive tiling and probability-blending pipeline preserves fine defects across variable-resolution imagery. MDS achieves 81.17% mIoU on the internal validation set and improves foreground image-level recognition over a backbone-matched SegDINO model, primarily for areal defects. Controlled ablations demonstrate the complementary contributions of routing supervision and cross-stream interaction while revealing a trade-off between areal-class performance and crack specialisation. The submitted model achieved 67.55% mIoU on an organiser-controlled hidden test, and the team placed second. Selective dynamic INT8 quantisation reduced model storage by 2.83 times with negligible accuracy loss.

0.34

Geometric Inconsistency Localization in Multi-View Image Sets

cs.CV cs.AIcs.CRcs.MM ·2026-09-25 ·Xander Staelens, Albéric Loos, Bert Ramlot, Hannes Mareen, Peter Lambert +1 more
benchmarkdatasetcode/data similarity 0.56
Abstract · 8 pages, accepted at the Deepfake Forensics Workshop (DFF 2026) at ACM Multimedia 2026

Novel view synthesis (NVS) models can produce realistic new views of the same scene from different viewpoints. However, these generated views are not always geometrically consistent with one another. Multi-view (MV) consistency has shown promise as a tool for evaluating these NVS models. Its potential for multimedia forensics, however, remains largely unexplored, particularly for localizing geometric inconsistencies across wide-baseline image pairs. To enable research in this direction, we introduce DeformView, a wide-baseline MV dataset with pixel-level annotations of geometric inconsistencies. Using DeformView, we evaluate state-of-the-art MV consistency-scoring methods and show that approaches developed for NVS evaluation transfer poorly to the forensic task of geometric inconsistency localization. To address this limitation, we propose DEFECt3R, a lightweight learning-based classifier that uses cross-view feature relationships to localize geometric inconsistencies at the pixel level. By learning from explicit supervision, including hard negatives from geometrically consistent yet deformed views, DEFECt3R improves localization performance and substantially reduces false positives compared to existing consistency-scoring methods. Ablation experiments further show that both feature representations and correspondence quality contribute to localization performance. Overall, our findings demonstrate that MV geometric consistency is a promising yet underexplored signal for multimedia forensics and establish a benchmark and baseline for geometric inconsistency localization in wide-baseline MV image pairs. Code and dataset are available at https://github.com/IDLabMedia/DeformView-DEFECt3R

0.42

Measurable Semantic 3D Gaussian Splatting with Joint Region and Depth Supervision for Interactive Building Inspection

cs.CV ·2026-10-09 ·Yi Zhang, Tian Tan, Ray Kai Leung Su
similarity 0.56
Abstract

Image-based 3D reconstruction provides a scalable representation for building inspection and maintenance. However, photorealistic reconstruction alone does not fully provide the geometric measurability, semantic structure, and interactive information access required for engineering applications. This study proposes a measurable semantic 3D Gaussian Splatting (3DGS) framework with region and depth supervision for interactive building inspection from multi-view imagery. Mask-based region supervision suppresses irrelevant backgrounds and focuses optimization on target regions. Point-wise depth supervision guides Gaussian centers toward physical surfaces using reference geometry derived from multi-view stereo (MVS) point clouds, providing geometric anchors for measuring physical dimensions and areas. A semantic Gaussian field associates learnable class features with individual Gaussian primitives, enabling semantic rendering and component-level inspection. These capabilities are operationalized through AEC-SplatTwin, an interactive building inspection platform supporting real-time visualization, semantic analysis, quantitative measurement, and multimodal large language model (MLLM)-assisted interaction. On the synthetic UAV-inspection QuakeCity and smartphone-captured HKUPB datasets, the framework reduces Gaussian-center depth MAE by 58.1% and 86.8%, while its semantic field achieves mIoU values of 0.8529 and 0.8642. On HKUPB, the mean relative errors for height, width, and area measurements are 0.33%, 1.07%, and 0.60%. These results show that the proposed framework extends 3DGS beyond visual reconstruction into a measurable, semantically structured, and interactive engineering representation for building inspection.

0.16

An End-to-End Automated Pipeline for Controllable Crack Data Synthesis

cs.CV ·2026-09-11 ·Conghui Li, Muxin Pu, Chern Hong Lim, Weiyao Lin, Xin Wang
similarity 0.56
Abstract

Vision-based crack inspection depends on segmentation networks whose reliability depends on the quantity, diversity and label quality of their training data. Pixel-level annotations are costly, and crack images of specific structures are scarce. Generative augmentation can supply additional data, but existing methods address isolated steps. They reuse annotated masks, offer limited control over crack geometry, and adopt the conditioning mask as the label without checking it. This paper presents an end-to-end pipeline that produces labelled crack data without manual annotation and assesses the reliability of these data and of the detectors trained on them. Procedurally sampled Bézier skeletons with guaranteed geometric properties are converted into crack masks by a generative adversarial network (GAN). A dual-ControlNet Stable Diffusion model renders the masks as crack images, either on text-described surfaces or on user-provided backgrounds. An ensemble of segmentation networks trained on real images combines its agreement with the inherited label and its internal disagreement into a pixel-wise label confidence. This confidence weights the training loss instead of removing samples with a threshold. The trained detectors are evaluated with image-space probability of detection (POD) and calibration analyses. On CRACK500 and CrackTree200, the pipeline improves five segmentation networks over conventional, diffusion-based and flow-matching-based augmentation, and on CRACK500 confidence weighting yields a higher accuracy than threshold filtering at every tested threshold. On CRACK500, the crack width that U-Net detects with 90\% probability at 95\% confidence decreases from 8.0 to 4.3 pixels, and the expected calibration error decreases from 14.2\% to 9.6\%.

0.11

FDAM: A Frequency-Direction-Aware Multi-Task Framework for Pavement Crack Grid Localization

cs.CV ·2026-11-14 ·Haiyang Xu, Bin Pan, Mengze Wang, Qiaoying Qu, Zhenwei Shi
code/data similarity 0.54
Abstract

Pavement crack grid localization remains challenging for thin and tiny cracks due to weak visual cues and background interference. Box detection often misses these cracks, while supervised semantic segmentation faces limited pixel-wise annotations and high labeling costs. In this paper, we propose a Frequency-Direction-Aware Multi-Task framework (FDAM) with box detection and grid classification branches. The core grid classification branch comprises Frequency-Domain Enhancement (FDE) and Directional Feature Refinement (DFR). FDE adaptively weights spectral bands and fuses reconstructed features with spatial features. DFR captures thin crack patterns through multi-scale strip convolutions, direction-sensitive modulation, and feature recalibration. Sparse positive cells and ambiguous local predictions motivate adaptive grid supervision. Adaptive Importance Reweighting emphasizes uncertain predictions and local label transitions, with focal supervision for all cells. Our contribution is to couple the box detection and grid classification branches through shared feature learning for pavement crack grid localization. We validate FDAM on our RoadDistress2026 dataset of thin and tiny cracks and further evaluate it on public datasets Crack500 and DeepCrack. The code is available at https://github.com/Lab-PANbin/FDAM

0.27