CS Paper Radar

3D Point Cloud from Close-Range Photogrammetry for Defect Characterisation of Rubberised Concrete

Jiacheng Liu, Mohammed Alnahhal, Ailar Hajimohammadi, Sara Gonizzi Barsanti, Jinling Wang, Mohsen Kalantari

cs.CV ·submitted 2026-08-21 03:28 UTC · v1
published

Abstract

While three-dimensional (3D) point clouds are widely used in civil engineering, mainstream LiDAR systems such as Terrestrial Laser Scanning (TLS) are physically constrained to laboratory environments. Since their laser spot size typically exceeds the width of microcracks, the beam physically bridges over voids, rendering TLS unsuitable for fine-scale defect analysis. Alternatively, close-range photogrammetry utilising Structure-from-Motion (SfM) and Multi-View Stereo (MVS) algorithms offers a solution for testing highly tortuous materials, and its utility at fine-scale remains underexplored. This study adapts photogrammetric workflows specifically for rubberised concrete (RuC), a sustainable composite exhibiting high ductility and complex fracture morphologies. High-resolution image sets were captured using a Canon DSLR and an iPhone 16 to generate dense 3D models. Comparisons revealed that the DSLR-based reconstruction achieved sub-millimetre resolution, demonstrating superior performance for fine-scale surface monitoring. An RGB-guided crack extraction method was developed to enhance the identification of surface defects and isolate potential crack areas from the background. The extracted crack regions were visually distinguishable and provided a well-structured geometrical representation of defect morphology. Furthermore, a Pre and Post-Test deformation analysis was conducted to quantify surface displacement across testing stages. The results confirm that this close-range photogrammetry workflow is a flexible, high-resolution alternative to LiDAR for surface inspection and deformation monitoring of specimens in laboratory settings. Ultimately, this approach establishes a robust geometric baseline for future automated 3D feature characterisation and material performance evaluation.

Comment
8 pages, 10 figures. Published in the International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XXV ISPRS Congress 2026, Toronto, Canada
Journal ref
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLIX-B2-2026, 1251-1258, 2026
DOI
10.5194/isprs-archives-XLIX-B2-2026-1251-2026

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-View and Cross-Time Tracking of Crack Evolution in Concrete

eess.IV cs.CV ·2026-10-24 ·Pengru Deng, Jiapeng Yao, Su Wang, Xuhui He, Zhao Wang +3 more
similarity 0.57
Abstract · 50 pages. Author manuscript

Crack propagation provides richer information than static crack observations for evaluating structural conditions of concrete infrastructure and planning maintenance strategies. Unlike static crack detection, which can now be largely automated using computer vision, vision-based crack tracking is a coupled cross-view and cross-time problem: the same physical crack must retain its identity as camera viewpoints change, while newly developed growth must be distinguished from existing crack segments in a unified reference view. Existing segmentation and 3D reconstruction methods can recover crack masks or scene geometry, but they do not preserve crack identity across views or quantify temporal extension. To address this gap, this study formulates crack growth monitoring as a cross-view and cross-time crack-instance tracking task and proposes a geometry-assisted, morphology-aware framework. The framework first uses image-based geometric registration to align observations from different viewpoints into a shared structural reference, then applies morphology-aware instantiation to assign physically interpretable crack identities, and finally performs temporal mapping in the unified view to distinguish newly developed growth from existing crack segments. To enable evaluation, a temporally annotated dataset was established and used, covering three representative cracking scenarios: single dominant crack propagation, mixed-mode branching, and multiple-crack interaction, with pixel-level masks and cross-time instance labels. Experimental results show that the proposed framework can establish loose cross-view identity correspondence under changing viewpoints, while strict spatial overlap and growth localization remain limited by early micro-crack segmentability and projection drift, highlighting directions for future crack-monitoring research.

0.25

An Automated Thickness Evaluation Procedure Using an Integrated Structured Light 3D Camera in a Robotic Bioprinting Framework

cs.RO ·2026-09-10 ·Ehsan Zobeidi, Omid Rezayof, Farshid Alambeigi
published similarity 0.56
Abstract · This paper has been accepted for publication at the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

Bioprinting is emerging as a tissue engineering technique to replace common treatment methods for large scale injuries. While thickness of the BioPrinted Constructs (BPCs) have shown to be of importance in the cell maturation and integration, the literature lacks a robust, automated, and quantitative method for measuring these metrics. In this paper, we propose a fully automated vision-based method for measuring the thickness of the BPCs with complex geometries. Leveraging the point cloud and RGB images of a structured light 3D camera, our proposed method performs an image-based segmentation for delineating the BPCs from the RGB images, accompanied by novel geometry-based thickness measurement algorithms performed on the point cloud scans. These algorithms combine the segmentation mask with the robot's forward kinematics data and a 3D point cloud scan to precisely measure the aforementioned metrics for complex-shaped BPCs. The proposed method was evaluated in simulation and experimental studies. In simulation studies, the algorithms were used to measure the thickness of some virtually created BPCs with known thickness. The comparison between the measured and true thicknesses demonstrates the high accuracy of the proposed method, achieving mean absolute errors between 0.025 mm and 0.057 mm in simulation at a spatial resolution of 0.1 mm x 0.1 mm per pixel. Furthermore, we successfully deployed the algorithms on our robotic bioprinting setup utilizing a structure light 3D camera, where complex patterns were printed and the developed methods utilized to accurately measure the thickness of printed BPCs.

0.58

Integrated Laser Scanning and Image-Based Topology Optimization Techniques for Detection and Quantification of Visible and Subsurface Structural Defects

cs.CV ·2026-09-01 ·Mehrdad Shafiei Dizaji, Devin Harris
unusual similarity 0.55
Abstract · 9, 5

Reliable characterization of structural defects requires methods capable of resolving both directly observable surface damage and damage that is not visible from the inspected surface. This study presents two complementary non-contact, vision-based approaches for the detection and quantitative characterization of defects in structural components. The first approach employs high-resolution laser scanning to generate three-dimensional (3D) point clouds of damaged steel specimens. Comparative processing of measured and reference point clouds is used to localize damaged regions, quantify geometric loss, and transfer the measured defect geometry to a finite element representation. The second approach combines full-field surface deformation measurements obtained using three-dimensional digital image correlation (3D-DIC) with finite element model updating and topology optimization. In this inverse framework, measured surface response is used to infer subsurface abnormalities through their influence on the spatial distribution of structural response. Experimental steel-beam specimens containing controlled smooth defects and randomly distributed defects are used to evaluate the approaches. Comparisons with milling-based ground-truth measurements demonstrate that both methods can identify and quantify defect geometry, while providing complementary information for visible and subsurface damage assessment. The combined framework establishes a pathway toward high-fidelity, non-contact structural condition assessment and model updating for components with complex and irregular damage.

0.25

Image-Guided Pavement Defect Recognition in GPR Data with novel 3D Deep Learning Architecture

cs.CV ·2026-08-19 ·Yuandong Pan, Linjun Lu, Mudan Wang, Florian Noichl, Fan Xue +4 more
published similarity 0.54
Abstract

Ground Penetrating Radar (GPR) is a widely adopted non-destructive sensing technology for subsurface inspection in civil and transportation engineering. Despite its potential for pavement condition assessment, the large-scale application of GPR in automated inspection has two key challenges: the scarcity of annotated real-world datasets and the lack of deep learning models designed for the unique characteristics of 3-Dimensional (3D) GPR data. This study addresses these limitations by firstly introducing a cost-effective data preparation pipeline that integrates orthomosaic Red Green Blue (RGB) imagery with 3D GPR scans to generate annotated 3D GPR datasets. The proposed method uses the aligned segments of RGB and GPR data, using pavement surface images as a reference to transfer labels of surface-visible defects to corresponding GPR segments, enabling efficient large-scale annotation in a real-world dataset collected on a highway section under operation. In addition to the dataset contribution, we propose a specialised 3D Convolutional Neural Network (CNN) architecture incorporating residual connections, mixed convolutional kernel sizes, and both depthwise and channelwise attention mechanisms to enhance feature representation and defect classification. The model is evaluated on binary classification tasks for detecting patch and crack defects in pavement structures. Experimental results demonstrate that the proposed network outperforms baseline architectures across multiple evaluation metrics. Ablation studies further confirm the effectiveness of the designed architectural components. This work contributes a scalable and practical method for real-world dataset generation, along with a novel deep learning framework.

0.29

Measurable Semantic 3D Gaussian Splatting with Joint Region and Depth Supervision for Interactive Building Inspection

cs.CV ·2026-10-09 ·Yi Zhang, Tian Tan, Ray Kai Leung Su
similarity 0.53
Abstract

Image-based 3D reconstruction provides a scalable representation for building inspection and maintenance. However, photorealistic reconstruction alone does not fully provide the geometric measurability, semantic structure, and interactive information access required for engineering applications. This study proposes a measurable semantic 3D Gaussian Splatting (3DGS) framework with region and depth supervision for interactive building inspection from multi-view imagery. Mask-based region supervision suppresses irrelevant backgrounds and focuses optimization on target regions. Point-wise depth supervision guides Gaussian centers toward physical surfaces using reference geometry derived from multi-view stereo (MVS) point clouds, providing geometric anchors for measuring physical dimensions and areas. A semantic Gaussian field associates learnable class features with individual Gaussian primitives, enabling semantic rendering and component-level inspection. These capabilities are operationalized through AEC-SplatTwin, an interactive building inspection platform supporting real-time visualization, semantic analysis, quantitative measurement, and multimodal large language model (MLLM)-assisted interaction. On the synthetic UAV-inspection QuakeCity and smartphone-captured HKUPB datasets, the framework reduces Gaussian-center depth MAE by 58.1% and 86.8%, while its semantic field achieves mIoU values of 0.8529 and 0.8642. On HKUPB, the mean relative errors for height, width, and area measurements are 0.33%, 1.07%, and 0.60%. These results show that the proposed framework extends 3DGS beyond visual reconstruction into a measurable, semantically structured, and interactive engineering representation for building inspection.

0.16

Adaptive Depth-Map-Guided Bundle Adjustment for Correspondence-Free Multi-View Point Cloud Registration

cs.RO ·2026-09-01 ·Yiran Zhou, Yingyu Wang, Shoudong Huang, Liang Zhao
code/datahot direction similarity 0.53
Abstract · 10 pages, 5 figures

Robotic processing of irregular steel scrap requires dense 3-D measurement to replace manual visual assessment in hazardous cutting workcells. The reconstructed map is used to estimate piece dimensions, boundary geometry, feasible preheating and cutting regions, and collision-aware torch paths. The reconstruction errors therefore propagate directly to downstream measurement and planning. Existing multi-view registration methods commonly rely on feature extraction and data association to establish correspondences between views. In workcells with smooth metallic surfaces, repeated structures, occlusions, and partial overlaps, however, wrong correspondences may be established, leading to inaccurate pose estimation and distorted reconstruction. This paper presents an adaptive layered depth-map-guided bundle adjustment framework for correspondence-free multi-view point cloud registration. The scene is represented by a global 2.5-D grid, where each cell can adaptively maintain multiple depth hypotheses. Raw depth observations are directly projected into the global map to form depth constraints without explicit feature correspondences. At grid cells where multiple surfaces produce conflicting depths, a softmax-based layer assignment links each observation to compatible depth hypotheses. The resulting nonlinear least-squares formulation jointly refines sensor poses and the layered depth map, with correspondences implicitly induced by the depth-map representation and projection model. Experiments on self-collected industrial datasets show that the proposed method achieves consistently competitive reconstruction accuracy while maintaining robustness and low computational cost in challenging industrial scenarios. We release the open-source code implementation at: https://github.com/YiranZhou-Robotics/ADM-BA.git

0.42

Automated Weld Seam Recognition and 3D Mapping for Robotic Post Processing Using Photogrammetry and Semantic Segmentation

cs.RO ·2026-09-03 ·Augustin Raju, Abilash Madavath, Chandra Yuvesh Aubeeluck, Nicolas Pyschny, Felix Hackelöer +1 more
similarity 0.52
Abstract · Extended abstract not yet published to a conference or journal

Accurate identification of weld seam geometries is essential for automated robotic post processing operations such as grinding, finishing, and inspection. For large workpieces, complete surface scanning using high precision laser scanners or structured light sensors can be time consuming and often generates substantial amount of data that are not relevant. This paper presents an experimental vision based pipeline for the approximate localization of weld seams. This serves as a preliminary stage before high precision measurement. The proposed approach aims to reduce the overall scanning effort and data acquisition efficiency. The proposed method includes capturing images of the workpiece from multiple viewpoints, identifying weld seams from the images using semantic segmentation, reconstructing the workpiece using photogrammetry, and projection of identified weld seams into the reconstructed model.

0.20

Integrating Multi-view Multi-light Surface Reconstruction into Cultural Heritage Workflows

cs.CV ·2026-09-14 ·Baptiste Brument, Robin Bruneau, Benjamin Coupry, Vincent Demoulin, Jean Mélou +4 more
top venuecode/data similarity 0.52
Abstract · 15 pages, 9 figures. Accepted at VISART VIII, ECCV 2026 workshops

Cultural heritage documentation increasingly relies on image-based 3D surface reconstruction, with photogrammetry software making such workflows accessible to archaeologists, conservators, and heritage technicians. These tools have been successful for conventional multi-view acquisition, but they do not routinely exploit richer multi-view, multi-light data, despite its potential for improving fine-scale surface reconstruction. This limitation is particularly relevant in heritage contexts, where controlled-light acquisition devices such as RTI domes are already used to capture illumination-varying image sets. The challenge is therefore to connect these existing acquisition practices with recent computer vision methods in a form that can be used within operational heritage workflows. In this work, we address this need by integrating state-of-the-art components from computer vision for multi-view, multi-light surface reconstruction into Meshroom, an open-source photogrammetry framework. Rather than proposing a new reconstruction algorithm, our contribution is to assemble and expose existing advanced methods, namely a complete photometric stereo ecosystem (calibrated, self-calibrated and universal), automatic object masking, and multi-view normal-and-reflectance integration, within a usable heritage-oriented workflow. The proposed system thus provides an intermediate software layer between computer vision research code and practical cultural heritage applications, making recent techniques easier to use and evaluate.

0.65