CS Paper Radar

Integrated Laser Scanning and Image-Based Topology Optimization Techniques for Detection and Quantification of Visible and Subsurface Structural Defects

Mehrdad Shafiei Dizaji, Devin Harris

cs.CV ·submitted 2026-09-01 19:31 UTC · v1
unusual

Abstract

Reliable characterization of structural defects requires methods capable of resolving both directly observable surface damage and damage that is not visible from the inspected surface. This study presents two complementary non-contact, vision-based approaches for the detection and quantitative characterization of defects in structural components. The first approach employs high-resolution laser scanning to generate three-dimensional (3D) point clouds of damaged steel specimens. Comparative processing of measured and reference point clouds is used to localize damaged regions, quantify geometric loss, and transfer the measured defect geometry to a finite element representation. The second approach combines full-field surface deformation measurements obtained using three-dimensional digital image correlation (3D-DIC) with finite element model updating and topology optimization. In this inverse framework, measured surface response is used to infer subsurface abnormalities through their influence on the spatial distribution of structural response. Experimental steel-beam specimens containing controlled smooth defects and randomly distributed defects are used to evaluate the approaches. Comparisons with milling-based ground-truth measurements demonstrate that both methods can identify and quantify defect geometry, while providing complementary information for visible and subsurface damage assessment. The combined framework establishes a pathway toward high-fidelity, non-contact structural condition assessment and model updating for components with complex and irregular damage.

Comment
9, 5

Closest papers

Nearest neighbours by meaning across the whole index.

Evaluation of AI-based Visual Crack Detection in Steel Bridges Using Probability of Detection

cs.CV ·2026-08-18 ·Andrii Kompanets, Finn Michael Sherry, Remco Duits, Davide Leonetti, H. H. Snijder
unusual similarity 0.55
Abstract · Submitted

Bridge structures are regularly inspected for structural damage such as cracks and corrosion in order to ensure public safety and reduce maintenance costs. Much research has been done on automating this process using computer vision methods, which are often evaluated and compared using metrics such as intersection over union, mean average precision, etc. However, predicting the actual effectiveness of an inspection method within the field of structural engineering from these metrics remains challenging. To enable the systematic use of these increasingly popular methods in engineering practice, evaluating the performance of these methods in a way that is compatible with standard engineering approaches is therefore an urgent necessity. We present a new statistical evaluation framework to allow the comparison of computer vision methods with conventional visual inspection for crack detection in steel bridges. The framework is based on probability of detection curves and can account for the influence of image resolution. We apply this evaluation method to the real-world ``Cracks in Steel Bridges'' dataset, which contains annotated images of cracks in bridge structures. The quantification of the probability of detection and its uncertainty enables a practical assessment of the effect of automated methods for damage detection in structural reliability analyses. In turn, this enables the wide-spread use of automated (AI-based) damage detection in safety critical applications. This evaluation method provides evidence that the proposed computer vision approach approach is robust for the crack detection task and can have a high added value as an addition to conventional visual inspection methods.

0.48

3D Point Cloud from Close-Range Photogrammetry for Defect Characterisation of Rubberised Concrete

cs.CV ·2026-08-21 ·Jiacheng Liu, Mohammed Alnahhal, Ailar Hajimohammadi, Sara Gonizzi Barsanti, Jinling Wang +1 more
published similarity 0.55
Abstract · 8 pages, 10 figures. Published in the International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XXV ISP…

While three-dimensional (3D) point clouds are widely used in civil engineering, mainstream LiDAR systems such as Terrestrial Laser Scanning (TLS) are physically constrained to laboratory environments. Since their laser spot size typically exceeds the width of microcracks, the beam physically bridges over voids, rendering TLS unsuitable for fine-scale defect analysis. Alternatively, close-range photogrammetry utilising Structure-from-Motion (SfM) and Multi-View Stereo (MVS) algorithms offers a solution for testing highly tortuous materials, and its utility at fine-scale remains underexplored. This study adapts photogrammetric workflows specifically for rubberised concrete (RuC), a sustainable composite exhibiting high ductility and complex fracture morphologies. High-resolution image sets were captured using a Canon DSLR and an iPhone 16 to generate dense 3D models. Comparisons revealed that the DSLR-based reconstruction achieved sub-millimetre resolution, demonstrating superior performance for fine-scale surface monitoring. An RGB-guided crack extraction method was developed to enhance the identification of surface defects and isolate potential crack areas from the background. The extracted crack regions were visually distinguishable and provided a well-structured geometrical representation of defect morphology. Furthermore, a Pre and Post-Test deformation analysis was conducted to quantify surface displacement across testing stages. The results confirm that this close-range photogrammetry workflow is a flexible, high-resolution alternative to LiDAR for surface inspection and deformation monitoring of specimens in laboratory settings. Ultimately, this approach establishes a robust geometric baseline for future automated 3D feature characterisation and material performance evaluation.

0.62

Automated Weld Seam Recognition and 3D Mapping for Robotic Post Processing Using Photogrammetry and Semantic Segmentation

cs.RO ·2026-09-03 ·Augustin Raju, Abilash Madavath, Chandra Yuvesh Aubeeluck, Nicolas Pyschny, Felix Hackelöer +1 more
similarity 0.51
Abstract · Extended abstract not yet published to a conference or journal

Accurate identification of weld seam geometries is essential for automated robotic post processing operations such as grinding, finishing, and inspection. For large workpieces, complete surface scanning using high precision laser scanners or structured light sensors can be time consuming and often generates substantial amount of data that are not relevant. This paper presents an experimental vision based pipeline for the approximate localization of weld seams. This serves as a preliminary stage before high precision measurement. The proposed approach aims to reduce the overall scanning effort and data acquisition efficiency. The proposed method includes capturing images of the workpiece from multiple viewpoints, identifying weld seams from the images using semantic segmentation, reconstructing the workpiece using photogrammetry, and projection of identified weld seams into the reconstructed model.

0.20

Feature identification for parameter extraction and defect detection using machine learning

cs.LG ·2026-10-05 ·Yan Guo, Helda Pahlavani, Artem Khachaturiants, Khalid Elsayed, Jakob van de Laar +3 more
published similarity 0.50
Abstract

Process control of advanced semiconductor nodes is not only pushing the limits of metrology equipment requirements in terms of resolution and throughput but also in terms of the richness of data to be extracted to enable engineers to finetune the process steps for increased yield. The move towards 3D structures requires extraction of critical dimension parameters from structures which can vary largely from layer to layer. For in-line process control, the necessary automation forces the development of layer and equipment-specific dedicated image processing algorithms. Similarly, with the increase in stochastic defects in the EUV era, detection of defects at the nm scale requires the identification of features captured in low resolution to meet the throughput requirements of HVM fabs, which can again lead to custom algorithm development. With the emergence of ML-based image processing methods, this process of algorithm development for both cases can be accelerated. In this work, we provide the general framework under which the images obtained from high-speed scanning probe microscopy-based systems can be used to train a network for either feature detection for parameter extraction or defect identification.

0.39

Graph-Based Characterization of Vision-Derived Dynamic Modes for Structural Damage Identification

eess.SY ·2026-09-09 ·R K B M Rizmi, Khalid Mahmud Labib, Shabbir Ahmed
unusual similarity 0.49
Abstract · Under review

This study presents a graph theoretic framework for characterizing damage-induced changes in the dynamics of a vibrating cantilever beam from non-contact video measurements. Within this approach, dynamics of the beam under healthy and damaged conditions with crack depths of 5, 10, and 13 mm are initially modeled using delay-embedded dynamic mode decomposition (DMD) from vision-based measurements. The resulting mode matrix from DMD is used to construct the adjacency matrix of a graph for this vibrating beam system, and its topological features such as graph connectivity, centrality, two-star statistics, and dyadic configurations are evaluated as damage-sensitive measures. Additionally, different DMD-based spectral and modal measures are evaluated to support the graph theoretic damage assessment. The results show a monotonic reduction in graph connectivity, nodal accessibility, and local organization of the graph with increasing crack depth. A parametric numerical study further validates the decreasing connectivity trend observed experimentally. The results demonstrate that the topological features of the graph derived from the DMD mode matrix provide an interpretable representation of damage-induced changes in the beam dynamics and offer a promising basis for vision-based structural damage identification.

0.27

Region-Aware Multi-View Inspection Using Deep Learning and Domain-Informed Decision Fusion

cs.CV cs.LGeess.IV ·2026-10-21 ·Srivishnu Ethirajulu Krishnaraj, Rishikesh R. Chopade
similarity 0.48
Abstract · 10 pages, 4 figures, 10 tables

Automated optical inspection of precision components with tiny surface defects remains challenging when different regions of the same component exhibit different defect characteristics and, therefore, different acceptance criteria. This paper presents a region-aware, dual-model inspection framework that combines instance segmentation of localized seat-region defects with image-level classification of global shaft-region anomalies. Rather than treating these two model detections as sufficient evidence for component rejection, a deterministic decision fusion layer that formalizes industrial Standard Operating Procedures is applied to the model outputs to make the final component level decision. A PLC-synchronized imaging system acquires 18 seat and 18 shaft images over a full 360-degree rotation to provide multi-view circumferential coverage. The framework was evaluated on 380 automotive fuel injector needles, covering representative operational defect types, using identical model predictions in all configurations. Direct model-output aggregation via simple union logic (where any single-view detection flags a rejection) identified all 104 non-conforming components but produced a component level false rejection rate of 57.6%. Inclusion of a complete decision layer maintained the observed non-conforming (NOK) recall of 100% while reducing the false rejection rate to 10.9%, corresponding to an 81.1% reduction in false-positive component decisions. The results demonstrate that formalized manufacturing acceptance criteria can complement sensitive visual models by translating frame-level detections into practical and traceable component-level decisions.

0.27

Adaptive Depth-Map-Guided Bundle Adjustment for Correspondence-Free Multi-View Point Cloud Registration

cs.RO ·2026-09-01 ·Yiran Zhou, Yingyu Wang, Shoudong Huang, Liang Zhao
code/datahot direction similarity 0.48
Abstract · 10 pages, 5 figures

Robotic processing of irregular steel scrap requires dense 3-D measurement to replace manual visual assessment in hazardous cutting workcells. The reconstructed map is used to estimate piece dimensions, boundary geometry, feasible preheating and cutting regions, and collision-aware torch paths. The reconstruction errors therefore propagate directly to downstream measurement and planning. Existing multi-view registration methods commonly rely on feature extraction and data association to establish correspondences between views. In workcells with smooth metallic surfaces, repeated structures, occlusions, and partial overlaps, however, wrong correspondences may be established, leading to inaccurate pose estimation and distorted reconstruction. This paper presents an adaptive layered depth-map-guided bundle adjustment framework for correspondence-free multi-view point cloud registration. The scene is represented by a global 2.5-D grid, where each cell can adaptively maintain multiple depth hypotheses. Raw depth observations are directly projected into the global map to form depth constraints without explicit feature correspondences. At grid cells where multiple surfaces produce conflicting depths, a softmax-based layer assignment links each observation to compatible depth hypotheses. The resulting nonlinear least-squares formulation jointly refines sensor poses and the layered depth map, with correspondences implicitly induced by the depth-map representation and projection model. Experiments on self-collected industrial datasets show that the proposed method achieves consistently competitive reconstruction accuracy while maintaining robustness and low computational cost in challenging industrial scenarios. We release the open-source code implementation at: https://github.com/YiranZhou-Robotics/ADM-BA.git

0.42

Computational Depth Measurement in Thermographic Video: Overcoming Spatial Overfitting via Spatio-Temporal Decoupling

cs.AI cs.CV ·2026-08-29 ·Zain Ul Abidin, Habeeban Memon, Junaid Ahmed
similarity 0.48
Abstract

Accurate through-thickness measurement of subsurface delamination depth in Carbon Fiber Reinforced Polymer (CFRP) is important for structural assessment because defect location determines affected load-bearing layers. Optical pulsed thermography (OPT) provides a two-dimensional thermal video rather than volumetric measurements, so depth must be inferred from temporal heat-diffusion responses. A challenge is spatial dataset bias: when calibration defects follow regular grids, regression models may memorize their geometry instead of learning physical relationship between thermal decay and depth. This work introduces a spatio-temporal decoupling architecture that separates spatial defect localization from temporal depth measurement. Defect regions are first localized using segmentation methods, after which thermal responses are spatially averaged and converted into sixteen physics-informed temporal, energy, statistical, and geometric features. These features expose the one-dimensional heat-conduction relationship while withholding pixel coordinates from the depth model. Four regression models are evaluated using specimen-level cross-validation: Random Forest (RF), Gradient Boosting Machine (GBM), Advanced Multi-Layer Perceptron (Adv-MLP), and XGBoost. Unregularized trees and over-parameterized Adv-MLP exhibit calibration collapse under geometric shifts, with errors exceeding 0.5 mm. In contrast, regularized XGBoost with L1/L2 penalties and column sampling maintains cross-specimen calibration, achieving a mean absolute error (MAE) of 0.056 mm and root mean square error (RMSE) of 0.085 mm. Predicted depths are merged with masks to generate Delaunay-triangulated three-dimensional defect models in three to five seconds per specimen. Results show that mathematical regularization and spatio-temporal decoupling reduce spatial memorization in thermal-video depth regression.

0.25