CS Paper Radar

Automated Weld Seam Recognition and 3D Mapping for Robotic Post Processing Using Photogrammetry and Semantic Segmentation

Augustin Raju, Abilash Madavath, Chandra Yuvesh Aubeeluck, Nicolas Pyschny, Felix Hackelöer, Florian Zwanzig

cs.RO ·submitted 2026-09-03 15:07 UTC · v1

Abstract

Accurate identification of weld seam geometries is essential for automated robotic post processing operations such as grinding, finishing, and inspection. For large workpieces, complete surface scanning using high precision laser scanners or structured light sensors can be time consuming and often generates substantial amount of data that are not relevant. This paper presents an experimental vision based pipeline for the approximate localization of weld seams. This serves as a preliminary stage before high precision measurement. The proposed approach aims to reduce the overall scanning effort and data acquisition efficiency. The proposed method includes capturing images of the workpiece from multiple viewpoints, identifying weld seams from the images using semantic segmentation, reconstructing the workpiece using photogrammetry, and projection of identified weld seams into the reconstructed model.

Comment
Extended abstract not yet published to a conference or journal

Closest papers

Nearest neighbours by meaning across the whole index.

Automatic weld seam segmentation for industrial quality control: a comparison of RGB and polarimetric imaging with CNN and transformer architectures

cs.CV cs.AI ·2026-08-26 ·Simone Garbin, Leonardo Venturoso, Marco Todescato
similarity 0.66
Abstract

Visual inspection of welded assemblies remains one of the least automated stages in many industrial production processes, still depending largely on the experience of human operators and thus subject to inter-operator variability; the manufacturing of special-purpose machinery cabins, the setting of this study, is one representative case. This work evaluates the feasibility of automatic weld seam segmentation from RGB and polarimetric imagery, comparing controlled laboratory acquisitions with images captured under real, uncontrolled conditions. Convolutional neural network (CNN) architectures and transformer-based architectures are benchmarked under a unified, threshold-independent protocol, training each CNN with three random seeds to separate genuine effects from seed noise. In controlled RGB conditions, CNN models reach a mean mask mAP50 of up to 0.87, but drop to 0.22-0.48 under uncontrolled acquisition, showing that the acquisition setup is a first-order component of the inspection system. Polarimetric imaging with alignment-preserving geometric augmentation localizes previously unseen welds with a mean mask mAP50 up to 0.93: on par with, rather than ahead of, the best controlled-RGB result, but reaching that accuracy on uncontrolled RGB without requiring acquisition control. The clearest architectural finding concerns viewpoint robustness. In-distribution, transformers and CNNs are broadly comparable; but under a test-time viewpoint shift, the transformer models, and RF-DETR in particular, retain high accuracy while every CNN collapses. The gap holds across three seeds and a resolution-matched control, pointing to architecture rather than training resolution. Within the CNN family, capacity brings no reliable in-distribution gain once seed variance is accounted for: small CNNs suffice for fixed viewpoints, transformers for variable ones.

0.20

Adaptive Depth-Map-Guided Bundle Adjustment for Correspondence-Free Multi-View Point Cloud Registration

cs.RO ·2026-09-01 ·Yiran Zhou, Yingyu Wang, Shoudong Huang, Liang Zhao
code/datahot direction similarity 0.56
Abstract · 10 pages, 5 figures

Robotic processing of irregular steel scrap requires dense 3-D measurement to replace manual visual assessment in hazardous cutting workcells. The reconstructed map is used to estimate piece dimensions, boundary geometry, feasible preheating and cutting regions, and collision-aware torch paths. The reconstruction errors therefore propagate directly to downstream measurement and planning. Existing multi-view registration methods commonly rely on feature extraction and data association to establish correspondences between views. In workcells with smooth metallic surfaces, repeated structures, occlusions, and partial overlaps, however, wrong correspondences may be established, leading to inaccurate pose estimation and distorted reconstruction. This paper presents an adaptive layered depth-map-guided bundle adjustment framework for correspondence-free multi-view point cloud registration. The scene is represented by a global 2.5-D grid, where each cell can adaptively maintain multiple depth hypotheses. Raw depth observations are directly projected into the global map to form depth constraints without explicit feature correspondences. At grid cells where multiple surfaces produce conflicting depths, a softmax-based layer assignment links each observation to compatible depth hypotheses. The resulting nonlinear least-squares formulation jointly refines sensor poses and the layered depth map, with correspondences implicitly induced by the depth-map representation and projection model. Experiments on self-collected industrial datasets show that the proposed method achieves consistently competitive reconstruction accuracy while maintaining robustness and low computational cost in challenging industrial scenarios. We release the open-source code implementation at: https://github.com/YiranZhou-Robotics/ADM-BA.git

0.42

OV-PEAR: Observation-Verified Pose-Scale Estimation and Reconstruction for Unknown Industrial Manipulation Objects

cs.RO cs.AI ·2026-10-19 ·Guoqin Tang, Qingxuan Jia, Yichen Tan, Zihang Lv, Ruiquan Wang +2 more
similarity 0.55
Abstract

Fine industrial robotic manipulation requires 6D pose, scale, and an operation-ready 3D model. Existing industrial pose estimation relies on CAD models, object-specific training data, or stable workcells, limiting use with unseen objects; zero-shot methods suffer from single-view occlusion, generative bias, and scale uncertainty. We present OV-PEAR, an observation-verified framework for 3D reconstruction and pose-scale estimation of unknown industrial objects. Its three-stage object-centric pipeline: (1) segments RGB-D instances and generates object-level 3D hypotheses; (2) anchors them to the robot frame via appearance-aware view retrieval, explicit scale search, and visibility-sensitive registration; (3) back-projects multi-view RGB-D evidence into the object-canonical frame to verify voxel occupancy, suppress hallucinations, and produce reusable trusted object models. On BOP-Industrial, OV-PEAR achieves 0.657 average AR and improves pose and voxel-level geometric consistency in real scenes; real-robot connector assembly reaches 99.67% grasp and 84.00% assembly success. The model library and pose-scale log enable short-term object-level state maintenance at 0.02 ms/frame.

0.12

PART: Learning 3D Part Assembly and Retrieval with Transformers

cs.CV cs.GR ·2026-09-17 ·Ruchao Bao, Wenzheng Wu, Chucheng Xiang, Zhongyuan Liu, Yuan Liu +3 more
top venuecode/datahot direction similarity 0.52
Abstract · Accepted to SIGGRAPH Asia 2026 Conference Papers. 11 pages, 12 figures. Project page: https://iambrc.github.io/PART-project-page/

3D assembly is fundamental to modern manufacturing and digital content creation. In this paper, we present PART, a unified transformer-based framework for 3D part retrieval and assembly: given a target shape and a part library, PART automatically selects the appropriate parts and predicts their 6-DoF poses to reconstruct the target. While prior work has achieved impressive progress on assembling a pre-defined set of parts, this more practical retrieval-based setting remains largely unexplored. The task faces three key challenges: (i) a combinatorially explosive search space that grows exponentially with library size; (ii) variable-length outputs, as different targets require different numbers of parts; and (iii) continuous 6-DoF pose estimation for part assembly. To address these, we formulate retrieval and assembly as a set prediction problem and design a novel transformer-based framework that retrieves parts and regresses their poses with variable-length output. Additionally, we exploit the duality between part pose estimation and target segmentation through joint training and a novel segmentation-enhanced optimization module. Finally, We curate a large-scale dataset of 80K+ shapes, and the results show that PART generalizes to scene layouts, image targets, and real-world scans. Project Page: https://iambrc.github.io/PART-project-page/.

0.64

3D Point Cloud from Close-Range Photogrammetry for Defect Characterisation of Rubberised Concrete

cs.CV ·2026-08-21 ·Jiacheng Liu, Mohammed Alnahhal, Ailar Hajimohammadi, Sara Gonizzi Barsanti, Jinling Wang +1 more
published similarity 0.52
Abstract · 8 pages, 10 figures. Published in the International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XXV ISP…

While three-dimensional (3D) point clouds are widely used in civil engineering, mainstream LiDAR systems such as Terrestrial Laser Scanning (TLS) are physically constrained to laboratory environments. Since their laser spot size typically exceeds the width of microcracks, the beam physically bridges over voids, rendering TLS unsuitable for fine-scale defect analysis. Alternatively, close-range photogrammetry utilising Structure-from-Motion (SfM) and Multi-View Stereo (MVS) algorithms offers a solution for testing highly tortuous materials, and its utility at fine-scale remains underexplored. This study adapts photogrammetric workflows specifically for rubberised concrete (RuC), a sustainable composite exhibiting high ductility and complex fracture morphologies. High-resolution image sets were captured using a Canon DSLR and an iPhone 16 to generate dense 3D models. Comparisons revealed that the DSLR-based reconstruction achieved sub-millimetre resolution, demonstrating superior performance for fine-scale surface monitoring. An RGB-guided crack extraction method was developed to enhance the identification of surface defects and isolate potential crack areas from the background. The extracted crack regions were visually distinguishable and provided a well-structured geometrical representation of defect morphology. Furthermore, a Pre and Post-Test deformation analysis was conducted to quantify surface displacement across testing stages. The results confirm that this close-range photogrammetry workflow is a flexible, high-resolution alternative to LiDAR for surface inspection and deformation monitoring of specimens in laboratory settings. Ultimately, this approach establishes a robust geometric baseline for future automated 3D feature characterisation and material performance evaluation.

0.62

RoboFin3D: A Sim-to-Real Platform for Robotic Surface Finishing

cs.RO ·2026-09-29 ·Haowei Wen, Shangtao Li, Vaibhav Sanjay, Philip Huang, Jiaoyang Li +1 more
published similarity 0.52
Abstract · Accepted for poster presentation at the IROS 2026 Workshop on Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics

Grinding and sanding are fundamental processes in industrial robotic surface finishing. However, physical trials are expensive and consume workpieces, making reproducible experiments difficult. We present RoboFin3D, a sim-to-real platform built on Isaac Sim and the Newton physics engine, that provides physics-based grinding and sanding simulation for cheap and repeatable robotic surface finishing experiments. RoboFin3D utilizes a signed distance field (SDF) to model the changing geometry of the workpiece, enabling contact computation, live updates and rendering without an intermediate mesh. It additionally uses a separate surface field to model progressive surface appearance change during sanding. We also introduce WeldGen, a weld sampling module, to generate weld beads on 8,918 real-world workpiece meshes for providing diverse simulation assets. The simulation parameters are calibrated on real experimental results and our evaluation demonstrates our simulation's fidelity against the real world. We also demonstrate that simulation-generated data can be used to improve the performance of perception models. Simulation-only fine-tuning of SAM2 improves IoU for segmentation of unsanded regions from 77.15% to 84.47%, while combined synthetic and real training reaches 97.41%.

0.27

Catalogue Photography as a Cold Start: Toward Deployable Rotary Milling Tool Recognition

cs.CV cs.AIcs.RO ·2026-09-03 ·Abilash Philip Madavath, Chandra Yuvesh Aubeeluck, Augustin Raju, Nicolas Pyschny, Felix Hackelöer +1 more
similarity 0.52
Abstract · 4 pages, 4 tables, 1 figure, Extended abstract not yet published to a conference or journal

Verifying that manufactured batches of rotary milling tools, also known as carbide burrs, conform to production order sheets remains a largely manual and error-prone quality assurance task. Automating this process with computer vision faces a critical cold-start constraint since no labelled imagery from the deployment environment is available, leaving manufacturer catalogue photography as the sole source of supervision. We investigate how far catalogue supervision can support an industrial recognition pipeline under domain shift, explicitly measuring the gap between catalogue separability and performance on held-out field photographs. Our findings reveal three key insights. First, off-the-shelf frozen feature extractors do not reliably separate the two task attributes, head shape and tooth profile, motivating targeted representation learning. Second, metric learning produces near-perfect unsupervised cluster discovery on catalogue images (adjusted Rand index 0.94--0.97), yet on field photographs under half of the accuracy gained from training survives. Third, the largest transfer gains do not come from model scale or representation complexity, but from simple changes that reduce domain sensitivity: converting images to grayscale (+0.22) and constraining retrieval against the known order sheet (+0.11). We therefore treat catalogue photography as a useful cold start rather than a deployment-ready training domain, and provide empirical baselines and an evaluation protocol for catalogue-to-field transfer in precision tool manufacturing.

0.26

Integrated Laser Scanning and Image-Based Topology Optimization Techniques for Detection and Quantification of Visible and Subsurface Structural Defects

cs.CV ·2026-09-01 ·Mehrdad Shafiei Dizaji, Devin Harris
unusual similarity 0.51
Abstract · 9, 5

Reliable characterization of structural defects requires methods capable of resolving both directly observable surface damage and damage that is not visible from the inspected surface. This study presents two complementary non-contact, vision-based approaches for the detection and quantitative characterization of defects in structural components. The first approach employs high-resolution laser scanning to generate three-dimensional (3D) point clouds of damaged steel specimens. Comparative processing of measured and reference point clouds is used to localize damaged regions, quantify geometric loss, and transfer the measured defect geometry to a finite element representation. The second approach combines full-field surface deformation measurements obtained using three-dimensional digital image correlation (3D-DIC) with finite element model updating and topology optimization. In this inverse framework, measured surface response is used to infer subsurface abnormalities through their influence on the spatial distribution of structural response. Experimental steel-beam specimens containing controlled smooth defects and randomly distributed defects are used to evaluate the approaches. Comparisons with milling-based ground-truth measurements demonstrate that both methods can identify and quantify defect geometry, while providing complementary information for visible and subsurface damage assessment. The combined framework establishes a pathway toward high-fidelity, non-contact structural condition assessment and model updating for components with complex and irregular damage.

0.25