CS Paper Radar

Automatic weld seam segmentation for industrial quality control: a comparison of RGB and polarimetric imaging with CNN and transformer architectures

Simone Garbin, Leonardo Venturoso, Marco Todescato

cs.CV cs.AI ·submitted 2026-08-26 07:32 UTC · v1

Abstract

Visual inspection of welded assemblies remains one of the least automated stages in many industrial production processes, still depending largely on the experience of human operators and thus subject to inter-operator variability; the manufacturing of special-purpose machinery cabins, the setting of this study, is one representative case. This work evaluates the feasibility of automatic weld seam segmentation from RGB and polarimetric imagery, comparing controlled laboratory acquisitions with images captured under real, uncontrolled conditions. Convolutional neural network (CNN) architectures and transformer-based architectures are benchmarked under a unified, threshold-independent protocol, training each CNN with three random seeds to separate genuine effects from seed noise. In controlled RGB conditions, CNN models reach a mean mask mAP50 of up to 0.87, but drop to 0.22-0.48 under uncontrolled acquisition, showing that the acquisition setup is a first-order component of the inspection system. Polarimetric imaging with alignment-preserving geometric augmentation localizes previously unseen welds with a mean mask mAP50 up to 0.93: on par with, rather than ahead of, the best controlled-RGB result, but reaching that accuracy on uncontrolled RGB without requiring acquisition control. The clearest architectural finding concerns viewpoint robustness. In-distribution, transformers and CNNs are broadly comparable; but under a test-time viewpoint shift, the transformer models, and RF-DETR in particular, retain high accuracy while every CNN collapses. The gap holds across three seeds and a resolution-matched control, pointing to architecture rather than training resolution. Within the CNN family, capacity brings no reliable in-distribution gain once seed variance is accounted for: small CNNs suffice for fixed viewpoints, transformers for variable ones.

Closest papers

Nearest neighbours by meaning across the whole index.

Automated Weld Seam Recognition and 3D Mapping for Robotic Post Processing Using Photogrammetry and Semantic Segmentation

cs.RO ·2026-09-03 ·Augustin Raju, Abilash Madavath, Chandra Yuvesh Aubeeluck, Nicolas Pyschny, Felix Hackelöer +1 more
similarity 0.66
Abstract · Extended abstract not yet published to a conference or journal

Accurate identification of weld seam geometries is essential for automated robotic post processing operations such as grinding, finishing, and inspection. For large workpieces, complete surface scanning using high precision laser scanners or structured light sensors can be time consuming and often generates substantial amount of data that are not relevant. This paper presents an experimental vision based pipeline for the approximate localization of weld seams. This serves as a preliminary stage before high precision measurement. The proposed approach aims to reduce the overall scanning effort and data acquisition efficiency. The proposed method includes capturing images of the workpiece from multiple viewpoints, identifying weld seams from the images using semantic segmentation, reconstructing the workpiece using photogrammetry, and projection of identified weld seams into the reconstructed model.

0.20

Explainable Temporal Attention-based Defect Detection For Fillet Joints in Real-Time Gas Metal Arc Welding Based on Multi-modal Data

cs.AI cs.LG ·2026-09-07 ·Mobina Mobaraki, Mahyar Asadi, Klaske Van Heusden, Guy A. Dumont
similarity 0.64
Abstract

Deep learning is an efficient technique to monitor the real time welding process, reducing post-welding repairs and production delays. This paper leverages the monitoring capability by proposing a multi modal temporal attention based deep learning defect detection model for internal defects that are challenging to detect, including porosity, lack of penetration and fusion, undercut, and cold lap during Gas Metal Arc Welding in fillet joints. The model is trained on collected welding images and sound data from an industrial collaborative welding robot. The results show that the attention module can improve the F1 Score to 0.99. We use explainable Artificial Intelligence to interpret the proposed models behavior and dataset distribution, determining potential important areas in image and sound spectrograms and preferred modality to detect each defect. This improves trust and reliability in Artificial Intelligence driven welding inspection.

0.21

TEEP-RCNN: Texture-Enhanced Edge-aware Perception for Steel Surface Defect Detection via Improved Convolutional Block Attention in Faster R-CNN

cs.CV ·2026-09-23 ·Kirtan Rajesh
benchmark similarity 0.62
Abstract

Steel surface defect detection is critical for automated industrial quality control but remains challenging due to subtle inter-class texture differences and pronounced class imbalance. We introduce TEEP-RCNN (Texture-Enhanced Edge-aware Perception Region-based CNN), a two-stage detector built on Faster R-CNN with a Feature Pyramid Network backbone and an improved Convolutional Block Attention Module (CBAM). Our CBAM adds dropout regularization in the channel attention MLP and batch normalization on the spatial attention branch, reducing co-adaptation and stabilizing gating logits. Training uses a differential learning rate protocol with cosine annealing warm-up, separating update rates for the pre-trained ResNet-101 backbone and the detection head. At inference, predictions are refined via Test-Time Augmentation fused with Weighted Box Fusion (WBF), improving localization stability on elongated and boundary-adjacent defects. On the NEU-DET benchmark across six defect categories, TEEP-RCNN achieves 73.3\% mAP@50 and 37.9\% mAP@50-95 in only 10 training epochs on a single GPU, competitive with YOLOv11m (76.2\% mAP@50, 100 epochs) while outperforming it on the rolled-in-scale category under the COCO metric. Per-class analysis shows the spatial attention branch is most effective on elongated texture defects such as patches and scratches, while crazing remains an open challenge across both paradigms due to its distributed non-local texture structure.

0.14

Lowering the Barrier to AI-Driven Inspection: A No-Code Workflow for Automated Structural Defect Detection

cs.CV cs.LGeess.IV ·2026-08-25 ·Michael Holm, Tanner McElroy, Xinghang Zhang, Guang Lin
publishedcode/data similarity 0.60
Abstract · 11 pages, 7 figures. Accepted to ASME SMASIS 2026 (paper SMASIS2026-190654). Software available at https://github.com/michaelholm6/YOLOEZ

Structural health monitoring (SHM) is essential in modern engineering, providing data for condition-based maintenance, lifecycle assessment, and predictive decision-making. Traditionally, SHM relied on visual inspection to detect defects such as cracks and deformations. Early computer vision (CV) methods, including thresholding, edge detection, and handcrafted features, aimed to automate this process but were highly sensitive to noise, imaging variations, and multiscale defects, limiting their reliability. Recent advances in machine learning, particularly convolutional neural networks (CNNs) and You Only Look Once (YOLO), have improved defect detection accuracy and enabled real-time analysis. However, adoption in SHM remains limited due to technical barriers such as data labeling, model training, and deployment, which typically require programming expertise. To address this gap, we introduce YOLOEZ, an open-source, GUI-based tool for end-to-end YOLO model application. YOLOEZ integrates data labeling, training, and inference into a single interface, enabling high-performance model development without code while supporting reproducible workflows. Evaluation against existing software and classical image processing demonstrates that YOLOEZ not only outperforms traditional methods across most detection metrics, but also lowers adoption barriers present in other modern CV tools. By combining accuracy with accessibility, YOLOEZ facilitates wider use of AI-driven monitoring for predictive maintenance, digital twins, and intelligent structural systems.

0.42

Digitization of Analogue Gauges using Computer Vision

cs.CV cs.AI ·2026-11-19 ·Erico Kayumba Mutonkole, Olasupo Ajayi, Omowunmi Isafiade
published similarity 0.59
Abstract · 9 pages, 12 figures. Presented at SATNAC 2025

Analogue gauges remain prevalent in manufacturing industries for measuring physical quantities, yet manual monitoring by operators introduces human error and operational inefficiency. This research developed and evaluated an automated gauge reading system using computer vision and deep learning techniques. Three hybrid approaches were implemented and compared: OpenCV with Scikit-Image (traditional computer vision), OpenCV with ResNet18, and OpenCV with VGG19 (deep learning approaches). A comprehensive dataset of 1,848 pressure gauge images (0-10 BAR range) was curated through web scraping, synthetic generation, and augmentation techniques. The experimental results demonstrate that ResNet18 significantly outperforms the alternatives, achieving an accuracy of 97.3%, compared to VGG19's 64.4% and Scikit-Image's 63.8%. The study validates the effectiveness of residual learning architectures for industrial gauge digitization, providing a robust foundation for Industry 5.0 automation applications.

0.32

ProGAN-Based Synthetic Image Generation for Industrial Visual Inspection of Metallic Parts

cs.CV ·2026-10-12 ·Hossein Omid Beiki, Sepehr Asgari, Oliver Petrovic, Christian Brecher
similarity 0.58
Abstract

Automated visual inspection is essential for efficient repair and recycling of metallic components. AI-based defect detection is a strong fit. However, it is often constrained by scarce, low-diversity training data. To address this gap, we study Generative AI-driven synthetic image generation using Progressive Growing GANs (ProGAN). We implement a ProGAN pipeline with Wasserstein loss and gradient penalty and evaluate key hyperparameters on two public datasets, MVTec AD (metal nut) and MPDD (tube). As a result, training remained stable and the model yielded realistic images. These images can augment training data, improve robustness, and reduce the cost of collecting rare defects.

0.13

Image-Guided Pavement Defect Recognition in GPR Data with novel 3D Deep Learning Architecture

cs.CV ·2026-08-19 ·Yuandong Pan, Linjun Lu, Mudan Wang, Florian Noichl, Fan Xue +4 more
published similarity 0.58
Abstract

Ground Penetrating Radar (GPR) is a widely adopted non-destructive sensing technology for subsurface inspection in civil and transportation engineering. Despite its potential for pavement condition assessment, the large-scale application of GPR in automated inspection has two key challenges: the scarcity of annotated real-world datasets and the lack of deep learning models designed for the unique characteristics of 3-Dimensional (3D) GPR data. This study addresses these limitations by firstly introducing a cost-effective data preparation pipeline that integrates orthomosaic Red Green Blue (RGB) imagery with 3D GPR scans to generate annotated 3D GPR datasets. The proposed method uses the aligned segments of RGB and GPR data, using pavement surface images as a reference to transfer labels of surface-visible defects to corresponding GPR segments, enabling efficient large-scale annotation in a real-world dataset collected on a highway section under operation. In addition to the dataset contribution, we propose a specialised 3D Convolutional Neural Network (CNN) architecture incorporating residual connections, mixed convolutional kernel sizes, and both depthwise and channelwise attention mechanisms to enhance feature representation and defect classification. The model is evaluated on binary classification tasks for detecting patch and crack defects in pavement structures. Experimental results demonstrate that the proposed network outperforms baseline architectures across multiple evaluation metrics. Ablation studies further confirm the effectiveness of the designed architectural components. This work contributes a scalable and practical method for real-world dataset generation, along with a novel deep learning framework.

0.29

End-to-End Joint Training of Super-Resolution and Compression Artifact Removal for Industrial Machine Vision

cs.CV ·2026-11-09 ·Dang BuiDinh, Sang NguyenQuang, Anh NguyenPhuong, Wen-Hsiao Peng, Xiem HoangVan
similarity 0.57
Abstract

In industrial machine vision, images captured by edge devices are often downsampled and compressed to reduce bandwidth, introducing resolution loss and compression artifacts that severely degrade the performance of downstream tasks, such as defect detection. Existing quality enhancement methods typically apply super-resolution (SR) or compression artifact removal (CAR) independently or in a sequential manner and are largely optimized for human visual fidelity rather than machine perception. This paper proposes an end-to-end quality enhancement framework that integrates SR and CAR with a unified training strategy that optimizes both human-perception and machine-perception objectives. We investigate fixed-weight and uncertainty-based dynamic-weight loss functions to balance reconstruction quality and machine vision task performance. Extensive experiments on PCB Defect, DeepPCB, and NEU-DET datasets show that the proposed jointly trained model generally outperforms standalone and separately trained SR-CAR pipelines. In particular, under severe JPEG compression, our method improves defect detection performance from 0.461 to 0.887 mAP@50 on PCB Defect over sequential SR-CAR baselines, with only a slight reduction in PSNR. These results demonstrate that joint optimization is critical for compression-aware industrial machine vision systems.

0.28