CS Paper Radar

End-to-End Joint Training of Super-Resolution and Compression Artifact Removal for Industrial Machine Vision

Dang BuiDinh, Sang NguyenQuang, Anh NguyenPhuong, Wen-Hsiao Peng, Xiem HoangVan

cs.CV ·submitted 2026-11-09 03:48 UTC · v1

Abstract

In industrial machine vision, images captured by edge devices are often downsampled and compressed to reduce bandwidth, introducing resolution loss and compression artifacts that severely degrade the performance of downstream tasks, such as defect detection. Existing quality enhancement methods typically apply super-resolution (SR) or compression artifact removal (CAR) independently or in a sequential manner and are largely optimized for human visual fidelity rather than machine perception. This paper proposes an end-to-end quality enhancement framework that integrates SR and CAR with a unified training strategy that optimizes both human-perception and machine-perception objectives. We investigate fixed-weight and uncertainty-based dynamic-weight loss functions to balance reconstruction quality and machine vision task performance. Extensive experiments on PCB Defect, DeepPCB, and NEU-DET datasets show that the proposed jointly trained model generally outperforms standalone and separately trained SR-CAR pipelines. In particular, under severe JPEG compression, our method improves defect detection performance from 0.461 to 0.887 mAP@50 on PCB Defect over sequential SR-CAR baselines, with only a slight reduction in PSNR. These results demonstrate that joint optimization is critical for compression-aware industrial machine vision systems.

Closest papers

Nearest neighbours by meaning across the whole index.

You've Seen Enough: Quality-Constrained Image Coding for Machines

cs.CV cs.AI ·2026-09-20 ·Khoa Pham-Dinh, Sanaz Nami, Hamed Rezazadegan Tavakoli, Moncef Gabbouj, Farhad Pakdaman
similarity 0.66
Abstract

Visual data is increasingly consumed by machine-vision systems rather than by human observers. Image Coding for Machines (ICM) compresses images assuming the main observer is a computer vision application and that the human observer needs to inspect or validate the decisions. Inspired by just-noticeable distortion, we cap human-observed quality at a desired level and devote the remaining bits to machine performance. Specifically, joint compression-segmentation training is recast as a constrained optimization problem in which the codec must meet a predefined acceptable target visual quality while a task term consumes the remaining coding capacity. This paper proposes two variants of a penalty function that guides the quality toward the target: an absolute function and a bilinear function, the latter applying a steeper slope once the target visual quality is exceeded. Experimental results show that, under the quality constraint, the proposed method achieves BD-rates of $-22.82\%$ and $-29.81\%$ relative to an unconstrained joint rate--distortion--task optimization and a simple rate--distortion baseline, respectively, showcasing bitrate reduction with the same task performance. This is achieved while the codec also meets the target visual quality with a reasonable error and without adding any complexity overhead.

0.53

Artifact Filtering versus Artifact-Compensated Training in JPEG to JPEG AI Recompression

eess.IV cs.MM ·2026-11-09 ·Igor Podtsepko, Yuriy Kim, Karam Mahfod, Evgeny Belyaev, Kristian Kirs +2 more
similarity 0.66
Abstract · Preprint. Submitted to IEEE Multimedia on 21 February 2026. This is the author's draft version; it has not undergone peer review. 15 pages, …

In this paper, we consider the problem of recompression of images from JPEG to JPEG AI format. We show that direct recompression from JPEG to JPEG~AI trained on uncompressed images is accompanied by the preservation of the JPEG image artifacts in the resulting JPEG~AI image. In order to avoid it, we evaluate an approach where an artifacts removal neural network is first applied to the input JPEG image as an external pre-filter. However, in this case, the processing time is increased by 29 times. Therefore, we propose an artifact-compensated training for JPEG AI and show that it is able to combine pre-filtering against target distortions with efficient compression without increase in the processing time.

0.33

PixelIR: Fidelity-Perception Decoupling via Pixel-Space Image-Residual Flow Matching for Efficient One-Step Real-World Super-Resolution

cs.CV ·2026-08-31 ·Bingtian Qiao, Yue Shi, Yong Guo, Wenjun Zhang, Jiezhang Cao
position similarity 0.63
Abstract

Real-world image super-resolution (Real-ISR) aims to preserve structures supported by the degraded observation while reconstructing perceptually realistic details. However, existing Real-ISR methods largely optimize fidelity and perceptual quality within a shared network, causing the two objectives to interfere throughout training and making their balance difficult to control. Recent one-step methods reduce sampling steps, yet often inherit both this coupled optimization behavior and the expensive high-resolution backbone of their multi-step predecessors. We argue that efficient Real-ISR requires not only a shorter sampling trajectory, but also specialized modeling of faithful reconstruction and perceptual detail synthesis. Based on this insight, we propose PixelIR, a fidelity-perception decoupling framework built upon pixel-space image-residual flow matching. PixelIR first learns an image flow that maps the degraded observation to a faithful reconstruction. Then, a residual flow synthesizes the missing perceptual details from noise without repeatedly relearning or overwriting the complete restoration solution. We further distill the teacher into a deployment-oriented one-step student within a coarse-to-fine pyramid architecture. Extensive experiments show that PixelIR achieves leading PSNR, SSIM, and LPIPS on both RealSR and DRealSR. The final model completes pixel-space restoration in a single evaluation with only 32.9M parameters, 89.7G MACs, and 8.5ms latency, demonstrating a strong practical fidelity-perception-efficiency balance.

0.21

Fill2SR: Repurposing Inpainting Diffusion Transformers for Real-World Super-Resolution

cs.CV ·2026-09-27 ·Xingfu Yi, Xiaoxue Yu
top venuecode/data similarity 0.63
Abstract · ECCV 2026. 26 pages, 12 figures, including an 8-page appendix with additional visual results

Recent real-world image super-resolution (SR) methods often adapt text-to-image (T2I) backbones with ControlNet-style branches or spatial conditioning tokens, which increases memory and computes with resolution and often constrains training to a fixed scale. We propose Fill2SR, which repurposes a masked-inpainting Diffusion Transformer for SR without extra spatial branches. Our Inpainting-Interface Evidence Adapter (IIEA) writes the low-quality (LQ) observation into the native masked-image slot under a full-image mask, turning inpainting into a reverse-degradation conditional rectified flow trained with LoRA-only tuning. We further introduce RCDT, an offline pipeline that distills degradation descriptors from unpaired real images and transfers them onto clean targets using frozen open-source models. Fill2SR supports mixed-resolution training up to QHD and yields stable performance across $512/1024/2048$ outputs. On synthetic benchmarks, our base model with IIEA achieves the best LPIPS on DIV2K and LSDIR; adding RCDT trades a small LPIPS drop for consistently stronger no-reference quality on RealLQ250 and RealPhoto60. Fill2SR remains memory-predictable, running $1536^2$ inference on a single 32GB GPU and extending to multi-megapixel outputs via tiled restoration.

0.76

TEEP-RCNN: Texture-Enhanced Edge-aware Perception for Steel Surface Defect Detection via Improved Convolutional Block Attention in Faster R-CNN

cs.CV ·2026-09-23 ·Kirtan Rajesh
benchmark similarity 0.62
Abstract

Steel surface defect detection is critical for automated industrial quality control but remains challenging due to subtle inter-class texture differences and pronounced class imbalance. We introduce TEEP-RCNN (Texture-Enhanced Edge-aware Perception Region-based CNN), a two-stage detector built on Faster R-CNN with a Feature Pyramid Network backbone and an improved Convolutional Block Attention Module (CBAM). Our CBAM adds dropout regularization in the channel attention MLP and batch normalization on the spatial attention branch, reducing co-adaptation and stabilizing gating logits. Training uses a differential learning rate protocol with cosine annealing warm-up, separating update rates for the pre-trained ResNet-101 backbone and the detection head. At inference, predictions are refined via Test-Time Augmentation fused with Weighted Box Fusion (WBF), improving localization stability on elongated and boundary-adjacent defects. On the NEU-DET benchmark across six defect categories, TEEP-RCNN achieves 73.3\% mAP@50 and 37.9\% mAP@50-95 in only 10 training epochs on a single GPU, competitive with YOLOv11m (76.2\% mAP@50, 100 epochs) while outperforming it on the rolled-in-scale category under the COCO metric. Per-class analysis shows the spatial attention branch is most effective on elongated texture defects such as patches and scratches, while crazing remains an open challenge across both paradigms due to its distributed non-local texture structure.

0.14

ProgResViT: Progressive Resolution and Width for Adaptive Vision Transformers

cs.CV ·2026-09-02 ·Ali Hojjat, Janek Haberer, Olaf Landsiedel
code/data similarity 0.61
Abstract

Vision Transformers (ViTs) typically process every image using a fixed input resolution and model width, even though many images can be classified with substantially less computation. We introduce ProgResViT, an input-adaptive ViT that performs inference progressively across multiple rounds. The first round processes a low-resolution image with a narrow subnetwork. Inference terminates when the prediction is sufficiently confident; otherwise, the model reuses the representations produced in the current round and proceeds with a higher-resolution input and a wider subnetwork to refine its prediction. As all rounds share a single backbone, we propose Progress-Conditioned Soft Gating (PSG), which conditions token fusion and layer outputs on the current round, block, and input resolution. On image classification, applying ProgResViT to DeiT yields better accuracy-compute trade-offs than adaptive-width, adaptive-depth, and dynamic-token baselines. With knowledge distillation, a DeiT-based ProgResViT achieves 84.9% top-1 accuracy, slightly exceeding the reported DeiT-III-S accuracy under a comparable evaluation setting. We show that the same design also provides favorable accuracy-compute trade-offs for self-supervised DINO representations and downstream semantic segmentation. Code is available at https://github.com/ds-kiel/ProgResViT.

0.33

Dynamic Interpolation for Training-Time Prediction Reshaping in Low-Light Image Enhancement

cs.CV ·2026-10-13 ·Peirui Zhu, Shijie Hao, Jingxi Liao, Richang Hong, Meng Wang
publishedbenchmark similarity 0.61
Abstract · 18 pages, 9 figures. Published in IEEE Transactions on Circuits and Systems for Video Technology (Early Access)

Low-light image enhancement (LLIE) is an important image/video processing problem for reliable visual systems under poor illumination, yet it remains challenging due to the strong coupling among insufficient illumination, noise amplification, and structural degradation. Existing methods typically rely on sophisticated network architectures or engineered objective functions. While effective, the former increases model complexity and deployment burden, whereas the latter relies on empirically tuned loss weights. We revisit supervised LLIE from a training-dynamics perspective and observe that brightness-related errors tend to converge early, while residual noise and structural artifacts often remain insufficiently optimized in later stages. To address this issue, we propose a Dynamic Interpolation Training-only Module (DITM), which introduces no additional learnable parameters and adaptively reshapes the model prediction for supervised feed-forward LLIE training. Specifically, DITM employs brightness-aware interpolation, in which the model prediction is combined with a mean brightness-aligned image constructed by rescaling the model prediction according to the mean brightness of the ground-truth image. By reducing the relative dominance of global brightness discrepancy, DITM makes residual local errors more influential during backpropagation after global luminance has largely stabilized, thereby facilitating artifact suppression and fine-detail restoration in later training stages. DITM is used only during training and is fully removed at inference, introducing no additional inference cost. Extensive experiments on multiple benchmark datasets and CNN-, Transformer-, and Mamba-based LLIE backbones show that DITM consistently improves fidelity and perceptual quality while preserving the inference-time architecture and introducing no additional inference-time computation.

0.28

Real-Time Conveyor Belt Defect Detection via Edge TPU-Accelerated YOLOv11 on Raspberry Pi 5

cs.CV ·2026-10-25 ·Muhammad Nur Bijak Bestari, Mulki Indana Zulfa
code/data similarity 0.61
Abstract · 8 pages, 9 figures, 2 tables

Conveyor belts are vital arteries in continuous bulk material handling, particularly in heavy process industries such as cement manufacturing. Undetected structural anomalies (longitudinal tears, holes, degraded patch repairs, and impact punctures) cause catastrophic belt snapping, costly downtime, and severe safety hazards. While deep learning offers high accuracy, existing models rely on power-hungry workstation GPUs, hindering practical deployment at remote industrial edge points. In this paper, we propose, implement, and validate an end-to-end, low-power edge AI vision system for real-time conveyor belt defect detection deployed on a Raspberry Pi 5 accelerated by a Google Coral Edge TPU coprocessor. The system leverages an optimized YOLOv11 nano (YOLOv11n) architecture trained on a multi-source industrial corpus exceeding 3,000 augmented samples from an operational cement plant in West Java, open-source datasets, and automated captures. The model undergoes post-training full integer quantization (INT8) compiled for systolic tensor execution. Experimental results demonstrate robust detection capability, achieving precision of 0.742, recall of 0.730, and mAP@0.5 of 0.764 across four defect classes. Deployed on-site in an IP-rated enclosure interfaced with an RTSP PoE industrial camera, the system achieves stable throughput of 30-40 FPS at 320x320 resolution with an end-to-end latency of 70-90 ms. Operational profiling under harsh clinker dust confirms thermal equilibrium at 55 +/- 5 deg C on the host CPU and ~65 deg C on the Edge TPU with zero frame loss. This demonstrates that edge AI bridges the gap between high-accuracy computer vision and cost-effective predictive maintenance in continuous manufacturing.

0.38