CS Paper Radar

Real-Time Conveyor Belt Defect Detection via Edge TPU-Accelerated YOLOv11 on Raspberry Pi 5

Muhammad Nur Bijak Bestari, Mulki Indana Zulfa

cs.CV ·submitted 2026-10-25 14:14 UTC · v1
code/data

Abstract

Conveyor belts are vital arteries in continuous bulk material handling, particularly in heavy process industries such as cement manufacturing. Undetected structural anomalies (longitudinal tears, holes, degraded patch repairs, and impact punctures) cause catastrophic belt snapping, costly downtime, and severe safety hazards. While deep learning offers high accuracy, existing models rely on power-hungry workstation GPUs, hindering practical deployment at remote industrial edge points. In this paper, we propose, implement, and validate an end-to-end, low-power edge AI vision system for real-time conveyor belt defect detection deployed on a Raspberry Pi 5 accelerated by a Google Coral Edge TPU coprocessor. The system leverages an optimized YOLOv11 nano (YOLOv11n) architecture trained on a multi-source industrial corpus exceeding 3,000 augmented samples from an operational cement plant in West Java, open-source datasets, and automated captures. The model undergoes post-training full integer quantization (INT8) compiled for systolic tensor execution. Experimental results demonstrate robust detection capability, achieving precision of 0.742, recall of 0.730, and mAP@0.5 of 0.764 across four defect classes. Deployed on-site in an IP-rated enclosure interfaced with an RTSP PoE industrial camera, the system achieves stable throughput of 30-40 FPS at 320x320 resolution with an end-to-end latency of 70-90 ms. Operational profiling under harsh clinker dust confirms thermal equilibrium at 55 +/- 5 deg C on the host CPU and ~65 deg C on the Edge TPU with zero frame loss. This demonstrates that edge AI bridges the gap between high-accuracy computer vision and cost-effective predictive maintenance in continuous manufacturing.

Comment
8 pages, 9 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Lowering the Barrier to AI-Driven Inspection: A No-Code Workflow for Automated Structural Defect Detection

cs.CV cs.LGeess.IV ·2026-08-25 ·Michael Holm, Tanner McElroy, Xinghang Zhang, Guang Lin
publishedcode/data similarity 0.66
Abstract · 11 pages, 7 figures. Accepted to ASME SMASIS 2026 (paper SMASIS2026-190654). Software available at https://github.com/michaelholm6/YOLOEZ

Structural health monitoring (SHM) is essential in modern engineering, providing data for condition-based maintenance, lifecycle assessment, and predictive decision-making. Traditionally, SHM relied on visual inspection to detect defects such as cracks and deformations. Early computer vision (CV) methods, including thresholding, edge detection, and handcrafted features, aimed to automate this process but were highly sensitive to noise, imaging variations, and multiscale defects, limiting their reliability. Recent advances in machine learning, particularly convolutional neural networks (CNNs) and You Only Look Once (YOLO), have improved defect detection accuracy and enabled real-time analysis. However, adoption in SHM remains limited due to technical barriers such as data labeling, model training, and deployment, which typically require programming expertise. To address this gap, we introduce YOLOEZ, an open-source, GUI-based tool for end-to-end YOLO model application. YOLOEZ integrates data labeling, training, and inference into a single interface, enabling high-performance model development without code while supporting reproducible workflows. Evaluation against existing software and classical image processing demonstrates that YOLOEZ not only outperforms traditional methods across most detection metrics, but also lowers adoption barriers present in other modern CV tools. By combining accuracy with accessibility, YOLOEZ facilitates wider use of AI-driven monitoring for predictive maintenance, digital twins, and intelligent structural systems.

0.42

CF-YOLO: Context-Aware Feature Refinement for Camouflaged Industrial Micro-Defect Detection

cs.CV ·2026-08-28 ·Xinda Yu, Kunxin Zheng, Chunan Yu, Qingbo Song, Hao Xiao +2 more
benchmarkdatasetcode/datahot direction similarity 0.65
Abstract

Automated detection of surface micro-defects on industrial components, such as copper tubes, is critically important for quality assurance but remains challenging due to the minute scale of anomalies and their visual camouflage against complex backgrounds. These factors lead to weak feature representations and high rates of false positives and missed detections. To address these issues, we propose a novel real-time detection framework designed for efficient context perception and feature refinement. Our method integrates a Context-Perception Aggregation Module (CPAM), which synergises large-kernel perception for macro-texture context and small-kernel aggregation for sharp boundary delineation, effectively breaking the background camouflage. Furthermore, a Feature Additive Refinement Module (FARM) employs a linear-complexity additive token mixer to globally verify and refine the representation of fine-grained anomalies, suppressing noise-induced errors. To support research in this domain, we introduce the Copper Tube Defect Dataset (CTDD), a manually annotated benchmark containing 1,847 images and 4,898 boundingbox defect instances from copper-tube inspection scenarios. Extensive experiments demonstrate that our detector achieves strong and consistent performance on CTDD, outperforming representative baseline detectors, including YOLOv11, by 2.2% in mAP@50 and 3.9% in Precision while maintaining real-time inference speed. This work provides a robust and efficient solution for high-precision industrial inspection, bridging the gap between contextual understanding and detailed feature analysis. Our code and model are available at: https://github.com/Yu-Xinda/CFYOLO-Context-Aware-Feature-Refinement-for-Camouflaged-Industrial-Micro-Defect-Detection

0.43

Achieving Near-Zero-Overhead Multi-Model Hierarchical Classification in Real-Time Detection Pipelines

cs.CV cs.DCcs.LG ·2026-08-12 ·Vaishnav Raju
similarity 0.63
Abstract · 14 pages, 17 figures, 5 tables. Submitted to Journal of Real-Time Image Processing

Edge-deployed vision systems in target recognition, surveillance, autonomous vehicles, and drone domains require hierarchical inference pipelines where a detection model identifies objects of interest and downstream classifiers provide fine-grained attribute analysis. Running all models on the GPU creates a serial bottleneck that limits real-time throughput as pipeline stages grow. Modern edge SoCs pair GPUs with dedicated neural accelerators (NPUs, DLAs) capable of concurrent execution, yet deploying custom models on these accelerators remains impractical due to strict operator constraints, quantization incompatibilities, and an undocumented end-to-end pipeline. We target NVIDIA Jetson DLA cores as the representative platform. We present a five-step methodology for zero GPU fallback DLA INT8 deployment of classification backbones, comprising architecture adaptation, manual dynamic range workaround to rescue TensorRT's implicit quantization (recovering 94.0% accuracy from implicit quantization's 75%) for rapid pipeline validation before explicit quantization, quantization-aware training, ONNX graph surgery for DLA compilation, and a concurrent GPU-detection/DLA-classification inference pipeline. We document nine engineering constraints with root-cause analysis and generalizable solutions. Validation on a dual-head person attribute classifier running on DLA alongside a GPU object detector on a Jetson Orin NX demonstrates near-zero pipeline overhead (12.5 vs. 13.3~FPS detector-only at 1080p), with dual-DLA scaling at no additional cost. The methodology is backbone-agnostic and generalizes to any detection-classification edge pipeline.

0.12

Benchmarking Model Compression Techniques Across Heterogeneous Edge Platforms: A Predictive Maintenance Use Case for Rotating Machinery

cs.LG cs.PF ·2026-10-21 ·Matheus Calheira Guimarães de Oliveira, Marco Aurélio da Silva Cruz, Regis Cardoso, Lucas Cambuim, Rafael Macieira +7 more
similarity 0.63
Abstract

To enable Industry 5.0, where autonomous systems are widely adopted and integrated with people to promote sustainable development in industries, it is imperative to adapt complex deep learning models to operate efficiently on resource-constrained hardware for edge inference. However, adapting these models remains challenging due to the hardware heterogeneity of edge computing in industrial settings, performance degradation caused by model compression, and the lack of clear guidance on which compression techniques are practical and effective for applications such as predictive maintenance. To address these challenges, this paper presents a comprehensive comparative analysis of four state-of-the-art model compression techniques applied to a high-performance convolutional neural network for predictive maintenance using a real-world dataset of rotating machinery, equipment typically used in industry. The compressed models were evaluated across a heterogeneous set of nine computing platforms, ranging from highly constrained edge computing devices to general purpose and high-performance processors, reflecting the diversity and fragmentation typical of industrial edge environments. By jointly prioritizing classification performance, inference speed, and compression ratio, we found that compression using knowledge distillation emerged as the most effective approach. The model had more than 90% speedup across all devices while maintaining a 91.22% balanced F-score, with a very small drop in predictive performance relative to the uncompressed model, along with a 98.9% size reduction. Through successful deployment across multiple edge platforms and a systematic comparison of compression strategies, we demonstrated a clear path to achieving Industry 5.0 targets, drastically cutting computational costs and, consequently, energy consumption without sacrificing predictive performance.

0.13

From Pixels to Semantics: Edge AI for UAV-Based Critical Infrastructure Inspection

cs.DC ·2026-09-16 ·Reza Farahani, Naser Hossein Motlagh, Zoha Azimi, Christian Timmerer, Lorenzo Carnevale +2 more
similarity 0.63
Abstract · 8 pages, 3 figures, 2 tables, Sumbitted to IEEE Internet Computing 2026

Critical infrastructure assets such as bridges, tunnels, dams, and power line networks require timely and scalable inspection. While conventional manual inspection remains costly and hazardous, unmanned aerial vehicle (UAV)-based inspection has emerged as an efficient alternative for monitoring difficult-to-access structures. Existing UAV inspection pipelines have evolved from cloud-centric offline processing toward edge-based perception using lightweight object detectors such as YOLO for real- time defect localization. This article explores the transition toward fully edge-native semantic inspection powered by lightweight vision language models (VLMs), where UAVs move beyond object detection toward contextual structural understanding. It categorizes existing UAV inspection architectures, identifies their key system challenges and architectural requirements, and experimentally assesses the feasibility of semantic edge intelligence on NVIDIA Jetson UAV-class hardware using the COCO-Bridge dataset. The evaluation integrates a fine-tuned YOLO-26M for object localization and a lightweight SmolVLM-256 for semantic reasoning. Finally, it outlines future directions toward agentic, autonomous, trustworthy, and collaborative semantic UAV inspection across the edge-cloud continuum.

0.21

TEEP-RCNN: Texture-Enhanced Edge-aware Perception for Steel Surface Defect Detection via Improved Convolutional Block Attention in Faster R-CNN

cs.CV ·2026-09-23 ·Kirtan Rajesh
benchmark similarity 0.63
Abstract

Steel surface defect detection is critical for automated industrial quality control but remains challenging due to subtle inter-class texture differences and pronounced class imbalance. We introduce TEEP-RCNN (Texture-Enhanced Edge-aware Perception Region-based CNN), a two-stage detector built on Faster R-CNN with a Feature Pyramid Network backbone and an improved Convolutional Block Attention Module (CBAM). Our CBAM adds dropout regularization in the channel attention MLP and batch normalization on the spatial attention branch, reducing co-adaptation and stabilizing gating logits. Training uses a differential learning rate protocol with cosine annealing warm-up, separating update rates for the pre-trained ResNet-101 backbone and the detection head. At inference, predictions are refined via Test-Time Augmentation fused with Weighted Box Fusion (WBF), improving localization stability on elongated and boundary-adjacent defects. On the NEU-DET benchmark across six defect categories, TEEP-RCNN achieves 73.3\% mAP@50 and 37.9\% mAP@50-95 in only 10 training epochs on a single GPU, competitive with YOLOv11m (76.2\% mAP@50, 100 epochs) while outperforming it on the rolled-in-scale category under the COCO metric. Per-class analysis shows the spatial attention branch is most effective on elongated texture defects such as patches and scratches, while crazing remains an open challenge across both paradigms due to its distributed non-local texture structure.

0.14

YOLOF-MLD: A Multi-Level Distillation Framework for Efficient Object Detection

cs.CV ·2026-10-29 ·Xiaolong Wu, Liming Zheng, Zitong Liu, Yue Zheng
code/datahot direction similarity 0.62
Abstract · 4 pages

Efficient object detection on resource-constrained edge devices is essential for safety-critical applications such as fire-smoke monitoring. However, current lightweight frameworks, such as YOLO26, still rely on the parameter-dense multi-branch Feature Pyramid Network (FPN), preventing full exploitation of their lightweight advantage. Replacing FPN with YOLOF's single-input-single-output (SiSo) neck is a promising solution but causes substantial accuracy loss. To alleviate this, we propose YOLOF-MLD, a CPU-efficient multi-level distillation (MLD) framework that combines a YOLO26n backbone, a SiSo neck, and MLD. It aligns features at the backbone via sliced-semantics matching, neck with receptive-field matching, and response levels. On D-Fire and Annotated Fire-Smoke (AFS) datasets, YOLOF-MLD reduces the parameter count of YOLO26n by 35.7\% and achieves a 62.3\% speedup on Raspberry Pi 5, attaining 71.6% and 59.9% mAP@50, respectively, compared with 75.5% and 60.0% for YOLO26n. These results demonstrate a competitive accuracy--latency trade-off for edge deployment. Our code is available at https://github.com/XiaolongWU111/YOLOF---MLD/blob/main/README.md.

0.45

A Hardware-Aware Comprehensive Study of Edge Vision Deployment with A Unified Hardware-Model-Runtime Mapping Framework

cs.CV ·2026-11-18 ·Le Duc An, Le Duc Thanh, Vo Hoai Viet
surveybenchmark similarity 0.62
Abstract

The rapid growth of deep learning has driven the deployment of computer vision directly on resource-constrained edge devices. However, the extreme heterogeneity of edge hardware architectures poses major challenges in selecting and designing suitable vision models. This survey bridges the gap between edge hardware constraints, model architectures, and deployment software toolchains. We establish a comprehensive taxonomy classifying edge hardware into three distinct tiers: mid-range devices (GPUs and dedicated NPUs or TPUs), dedicated embedded MPU or SoC processors, and microcontrollers (MCUs). We aggregate and analyze multi-source benchmark results for image classification and object detection across the computing spectrum, spanning from tens of watts down to milliwatt-scale bare-metal MCUs. Based on these empirical findings, we propose a two-tiered hardware-to-model mapping framework that provides concrete model selection matrices across performance priorities (Speed, Balanced, Accuracy) and actionable architectural design principles (peak SRAM budgeting, resolution-first scaling, and algorithm-compiler co-design). Finally, we highlight critical deployment challenges including toolchain fragmentation, operator incompatibility, and Vision Transformer feasibility, and outline promising future research directions in on-device adaptation and sustainable Edge AI.

0.13