CS Paper Radar

Lowering the Barrier to AI-Driven Inspection: A No-Code Workflow for Automated Structural Defect Detection

Michael Holm, Tanner McElroy, Xinghang Zhang, Guang Lin

cs.CV cs.LGeess.IV ·submitted 2026-08-25 21:46 UTC · v1
publishedcode/data

Abstract

Structural health monitoring (SHM) is essential in modern engineering, providing data for condition-based maintenance, lifecycle assessment, and predictive decision-making. Traditionally, SHM relied on visual inspection to detect defects such as cracks and deformations. Early computer vision (CV) methods, including thresholding, edge detection, and handcrafted features, aimed to automate this process but were highly sensitive to noise, imaging variations, and multiscale defects, limiting their reliability. Recent advances in machine learning, particularly convolutional neural networks (CNNs) and You Only Look Once (YOLO), have improved defect detection accuracy and enabled real-time analysis. However, adoption in SHM remains limited due to technical barriers such as data labeling, model training, and deployment, which typically require programming expertise. To address this gap, we introduce YOLOEZ, an open-source, GUI-based tool for end-to-end YOLO model application. YOLOEZ integrates data labeling, training, and inference into a single interface, enabling high-performance model development without code while supporting reproducible workflows. Evaluation against existing software and classical image processing demonstrates that YOLOEZ not only outperforms traditional methods across most detection metrics, but also lowers adoption barriers present in other modern CV tools. By combining accuracy with accessibility, YOLOEZ facilitates wider use of AI-driven monitoring for predictive maintenance, digital twins, and intelligent structural systems.

Comment
11 pages, 7 figures. Accepted to ASME SMASIS 2026 (paper SMASIS2026-190654). Software available at https://github.com/michaelholm6/YOLOEZ

Closest papers

Nearest neighbours by meaning across the whole index.

Inspect Any Crack: An Automated End-to-End Crack Segmentation and Severity Assessment Framework

cs.CE ·2026-10-09 ·Ghodsiyeh Rostami, Po-Han Chen, Mahdi S. Hosseini
similarity 0.66
Abstract

Image-based crack analysis is essential for automated infrastructure inspection to reduce the cost, subjectivity, and safety risks of manual surveys. Despite advances in visual crack detection, methods that translate predictions into physically meaningful and engineering-interpretable crack condition information remain limited. To bridge this gap, this study proposes Inspect Any Crack (IAC), an innovative end-to-end crack recognition and condition assessment framework that automatically derives physical geometric measurements and continuous severity scores from concrete-crack imagery. At its core, IAC introduces SACv2-Tiny, an efficient crack segmentation model adapted from a vision foundation model. Trained on the challenging OmniCrack30K dataset, SACv2-Tiny achieved a $62.49\%$ F1-score and $45.45\%$ IoU on the test set and a mean zero-shot F1-score of $69.89\%$ across three unseen datasets, demonstrating robust segmentation that enables downstream analysis with limited post-processing. IAC further processes the predicted masks to quantify physical crack width and affected area using ground-sampling-distance calibration. Validation at 41 caliper-referenced locations yielded a mean relative width error of $7.33\%$. Beyond geometric quantification, IAC introduces a novel continuous crack-condition metric, the Crack Severity Index (CSI), bounded on $[0,100]$, which combines maximum crack width and affected-area ratio into a unified, standards-informed severity measure. Through these developments, IAC advances crack inspection beyond pixel-level recognition toward interpretable and automated infrastructure condition assessment.

0.13

Real-Time Conveyor Belt Defect Detection via Edge TPU-Accelerated YOLOv11 on Raspberry Pi 5

cs.CV ·2026-10-25 ·Muhammad Nur Bijak Bestari, Mulki Indana Zulfa
code/data similarity 0.66
Abstract · 8 pages, 9 figures, 2 tables

Conveyor belts are vital arteries in continuous bulk material handling, particularly in heavy process industries such as cement manufacturing. Undetected structural anomalies (longitudinal tears, holes, degraded patch repairs, and impact punctures) cause catastrophic belt snapping, costly downtime, and severe safety hazards. While deep learning offers high accuracy, existing models rely on power-hungry workstation GPUs, hindering practical deployment at remote industrial edge points. In this paper, we propose, implement, and validate an end-to-end, low-power edge AI vision system for real-time conveyor belt defect detection deployed on a Raspberry Pi 5 accelerated by a Google Coral Edge TPU coprocessor. The system leverages an optimized YOLOv11 nano (YOLOv11n) architecture trained on a multi-source industrial corpus exceeding 3,000 augmented samples from an operational cement plant in West Java, open-source datasets, and automated captures. The model undergoes post-training full integer quantization (INT8) compiled for systolic tensor execution. Experimental results demonstrate robust detection capability, achieving precision of 0.742, recall of 0.730, and mAP@0.5 of 0.764 across four defect classes. Deployed on-site in an IP-rated enclosure interfaced with an RTSP PoE industrial camera, the system achieves stable throughput of 30-40 FPS at 320x320 resolution with an end-to-end latency of 70-90 ms. Operational profiling under harsh clinker dust confirms thermal equilibrium at 55 +/- 5 deg C on the host CPU and ~65 deg C on the Edge TPU with zero frame loss. This demonstrates that edge AI bridges the gap between high-accuracy computer vision and cost-effective predictive maintenance in continuous manufacturing.

0.38

The Path to NDE 4.0: A Review of Algorithms, Techniques, and Strategies for Autonomous Inspection

cs.LG cs.ET ·2026-10-21 ·Ashiqur Rahmana, Venkata Devesh Reddy Seethi, Zachary Kral, Austin Yunker, Rajkumar Kettimuthu +1 more
survey similarity 0.65
Abstract

Non-Destructive Inspection (NDI) is a cornerstone of modern quality assurance, critical for ensuring the safety and reliability of infrastructure and manufactured components without causing damage. This paper presents a comprehensive review of the current NDI landscape, analyzing the field through four distinct lenses, namely, computational algorithms, physical techniques, industrial applications, and research objectives. We synthesize a broad range of academic literature to illustrate the rapid evolution from manual, analog interpretation to a digitized, data-centric paradigm known as NDE 4.0. Our analysis highlights the dominance of ultrasound and visual inspection as primary physical techniques, while revealing a significant shift toward deep learning and generative models for automated defect recognition. Despite these technological strides, the industry faces critical bottlenecks, notably the scarcity of standardized open-access datasets and the "black box" nature of AI models, which hinders widespread adoption. By charting these developments and identifying key research gaps, such as the need for explainable AI (XAI) and standardized digital twin protocols, this review offers a strategic roadmap for future research. It concludes that the future of NDI research should focus on the successful integration of intelligent, autonomous fusion of inspection data with advanced sensor technologies into asset lifecycle management.

0.31

TileNet: Tile-Based CNN-SVM Architecture for Autonomous Unmanned Aerial Systems Inspection of Flat Roofs

cs.CV cs.AI ·2026-09-11 ·Samuel Dunthorne, Hashim A. Hashim
published similarity 0.64
Abstract · Journal of Safety Science and Resilience

Flat roofs are among the most influential components of the building envelope, governing both structural performance and thermal efficiency, and thereby contributing directly to household energy consumption, carbon emissions, and long-term environmental sustainability. Timely detection of roof defects is essential for reducing heating and cooling losses, preventing moisture-driven degradation such as mold growth, and supporting national climate-change mitigation goals. This paper presents a real-time, Unmanned Aerial System (UAS)-based deep learning framework that autonomously detects defects using live imagery captured during dual-altitude aerial passes. The multi-resolution flight strategy is designed to aid the identification of both small, fine-scale defects and larger structural issues, enabling more comprehensive assessments. To meet the strict computational and power constraints of embedded UAS hardware, the proposed framework integrates a tile-based architecture with a lightweight Convolution Neural Network-Support Vector Machine (CNN-SVM) classifier designed for low-latency onboard inference. The final model-comprising five convolutional layers and four dense layers, the last a linear SVM head, achieved a mean test accuracy of $94.4\%$ ($95\%$ confidence interval $\pm0.4\%$ over three seeds) on a photo-level split ($43,383$ training, $3,869$ validation, and $2,540$ test tiled and augmented images), outperforming GoogLeNet ($89.2\%$) and AlexNet ($79.8\%$). Experimental evaluations using real UAS imagery collected by onsite visits with DJI Matrice 350 RTK drone demonstrate that the system supports rapid, repeatable, and safe roof inspections while reducing human risk, lowering operational costs, and enabling more sustainable building maintenance.

0.64

AGIDefect-4K: A Richly Annotated Dataset for AI-Generated Image Defect Detection, Localization and Explanation

cs.CV ·2026-08-21 ·Xiangfei Sheng, Weidong Zou, Tianjiao Gu, Zhichao Yang, Pengfei Chen +1 more
top venuedatasetcode/data similarity 0.64
Abstract · 8 pages, 6 figures. Accepted by ACM Multimedia 2026

Generative AI can now produce highly realistic images, yet current models still exhibit subtle but critical defects that undermine their reliability. While existing AI-generated image (AGI) evaluation benchmarks have made notable progress, comprehensive AGI defect diagnosis remains underexplored. To bridge this gap, we introduce AGIDefect-4K, a richly annotated dataset of 4,000 images from 15 state-of-the-art generative models spanning both open-source and closed-source systems. AGIDefect-4K features hierarchical defect annotations: (1) detection labels identifying whether defects exist, (2) pixel-level segmentation masks localizing defective regions, and (3) detailed textual explanations characterizing defect types and their perceptual impact. Each image is further annotated with an overall quality score. Building on this, we present AGIDA (AGI Defect Assistant), a baseline framework leveraging Multimodal Large Language Models (MLLMs) for joint defect detection, localization, explanation, and quality prediction. Comprehensive benchmarking on AGIDefect-4K reveals that AGI defect understanding remains challenging, underscoring the value of this dataset. The dataset is publicly available at https://github.com/sxfly99/AGIDefect-4K.

0.49

Feature identification for parameter extraction and defect detection using machine learning

cs.LG ·2026-10-05 ·Yan Guo, Helda Pahlavani, Artem Khachaturiants, Khalid Elsayed, Jakob van de Laar +3 more
published similarity 0.64
Abstract

Process control of advanced semiconductor nodes is not only pushing the limits of metrology equipment requirements in terms of resolution and throughput but also in terms of the richness of data to be extracted to enable engineers to finetune the process steps for increased yield. The move towards 3D structures requires extraction of critical dimension parameters from structures which can vary largely from layer to layer. For in-line process control, the necessary automation forces the development of layer and equipment-specific dedicated image processing algorithms. Similarly, with the increase in stochastic defects in the EUV era, detection of defects at the nm scale requires the identification of features captured in low resolution to meet the throughput requirements of HVM fabs, which can again lead to custom algorithm development. With the emergence of ML-based image processing methods, this process of algorithm development for both cases can be accelerated. In this work, we provide the general framework under which the images obtained from high-speed scanning probe microscopy-based systems can be used to train a network for either feature detection for parameter extraction or defect identification.

0.39

Explainable Temporal Attention-based Defect Detection For Fillet Joints in Real-Time Gas Metal Arc Welding Based on Multi-modal Data

cs.AI cs.LG ·2026-09-07 ·Mobina Mobaraki, Mahyar Asadi, Klaske Van Heusden, Guy A. Dumont
similarity 0.64
Abstract

Deep learning is an efficient technique to monitor the real time welding process, reducing post-welding repairs and production delays. This paper leverages the monitoring capability by proposing a multi modal temporal attention based deep learning defect detection model for internal defects that are challenging to detect, including porosity, lack of penetration and fusion, undercut, and cold lap during Gas Metal Arc Welding in fillet joints. The model is trained on collected welding images and sound data from an industrial collaborative welding robot. The results show that the attention module can improve the F1 Score to 0.99. We use explainable Artificial Intelligence to interpret the proposed models behavior and dataset distribution, determining potential important areas in image and sound spectrograms and preferred modality to detect each defect. This improves trust and reliability in Artificial Intelligence driven welding inspection.

0.21

TEEP-RCNN: Texture-Enhanced Edge-aware Perception for Steel Surface Defect Detection via Improved Convolutional Block Attention in Faster R-CNN

cs.CV ·2026-09-23 ·Kirtan Rajesh
benchmark similarity 0.62
Abstract

Steel surface defect detection is critical for automated industrial quality control but remains challenging due to subtle inter-class texture differences and pronounced class imbalance. We introduce TEEP-RCNN (Texture-Enhanced Edge-aware Perception Region-based CNN), a two-stage detector built on Faster R-CNN with a Feature Pyramid Network backbone and an improved Convolutional Block Attention Module (CBAM). Our CBAM adds dropout regularization in the channel attention MLP and batch normalization on the spatial attention branch, reducing co-adaptation and stabilizing gating logits. Training uses a differential learning rate protocol with cosine annealing warm-up, separating update rates for the pre-trained ResNet-101 backbone and the detection head. At inference, predictions are refined via Test-Time Augmentation fused with Weighted Box Fusion (WBF), improving localization stability on elongated and boundary-adjacent defects. On the NEU-DET benchmark across six defect categories, TEEP-RCNN achieves 73.3\% mAP@50 and 37.9\% mAP@50-95 in only 10 training epochs on a single GPU, competitive with YOLOv11m (76.2\% mAP@50, 100 epochs) while outperforming it on the rolled-in-scale category under the COCO metric. Per-class analysis shows the spatial attention branch is most effective on elongated texture defects such as patches and scratches, while crazing remains an open challenge across both paradigms due to its distributed non-local texture structure.

0.14