CS Paper Radar

TileNet: Tile-Based CNN-SVM Architecture for Autonomous Unmanned Aerial Systems Inspection of Flat Roofs

Samuel Dunthorne, Hashim A. Hashim

cs.CV cs.AI ·submitted 2026-09-11 16:11 UTC · v1
published

Abstract

Flat roofs are among the most influential components of the building envelope, governing both structural performance and thermal efficiency, and thereby contributing directly to household energy consumption, carbon emissions, and long-term environmental sustainability. Timely detection of roof defects is essential for reducing heating and cooling losses, preventing moisture-driven degradation such as mold growth, and supporting national climate-change mitigation goals. This paper presents a real-time, Unmanned Aerial System (UAS)-based deep learning framework that autonomously detects defects using live imagery captured during dual-altitude aerial passes. The multi-resolution flight strategy is designed to aid the identification of both small, fine-scale defects and larger structural issues, enabling more comprehensive assessments. To meet the strict computational and power constraints of embedded UAS hardware, the proposed framework integrates a tile-based architecture with a lightweight Convolution Neural Network-Support Vector Machine (CNN-SVM) classifier designed for low-latency onboard inference. The final model-comprising five convolutional layers and four dense layers, the last a linear SVM head, achieved a mean test accuracy of $94.4\%$ ($95\%$ confidence interval $\pm0.4\%$ over three seeds) on a photo-level split ($43,383$ training, $3,869$ validation, and $2,540$ test tiled and augmented images), outperforming GoogLeNet ($89.2\%$) and AlexNet ($79.8\%$). Experimental evaluations using real UAS imagery collected by onsite visits with DJI Matrice 350 RTK drone demonstrate that the system supports rapid, repeatable, and safe roof inspections while reducing human risk, lowering operational costs, and enabling more sustainable building maintenance.

Comment
Journal of Safety Science and Resilience

Closest papers

Nearest neighbours by meaning across the whole index.

picoEmergencyNet : Attention-Enhanced Ultra-Small Deep Learning Model for Aerial Image Classification in Emergency Monitoring

cs.CV ·2026-11-10 ·Christos Kyrkou
published similarity 0.66
Abstract · 6 pages, Appeared in IJCNN2026 C. Kyrkou, "picoEmergencyNet: Attention-Enhanced Ultra-Small Deep Learning Model for Aerial Image Classificat…

Real-time disaster recognition from aerial imagery requires deep learning models that operate under strict memory, compute, and latency constraints. While recent approaches achieve high accuracy, their computational cost limits deployment on resource-constrained UAV platforms. This work introduces picoEmergencyNet, an ultra-lightweight convolutional neural network designed for aerial image disaster classification. The proposed architecture combines depthwise dilated convolutions with efficient channel attention and channel shuffling to enable multi-scale feature extraction at minimal computational cost. picoEmergencyNet has 23k parameters and 7M FLOPs, requiring only 0.1 MB of model storage. Evaluated on the AIDER and AIDERv2 disaster datasets, it achieves up to 96.1% accuracy, matching or exceeding state-of-the-art lightweight models that are orders of magnitude larger. Deployment experiments on the NVIDIA Jetson AGX Orin show that, without hardware-specific optimizations, picoEmergencyNet achieves 258 FPS on GPU and 46 FPS on CPU with a 7x lower activation memory footprint compared to competing models. These results demonstrate that careful architectural specialization, rather than model scaling, enables highly efficient and accurate TinyML-ready disaster recognition for real-time UAV-based emergency monitoring.

0.35

A Machine Learning Framework for Fault Detection, Isolation, and Severity Prediction of Autonomous VTOL Aircraft

cs.LG ·2026-09-12 ·Ripon C. Sarker, Pedram H. Dabaghian, Raman Goyal, Atanu Halder
published similarity 0.66
Abstract

Fault detection in autonomous VTOL aircraft is critical because even minor component degradations can rapidly destabilize multirotor vehicles operating in complex, safety-critical environments, motivating robust fault detection and estimation strategies capable of identifying early signs of rotor damage; however, real-flight fault detection remains challenging due to sensor noise, environmental disturbances, and the nonlinear aerodynamics of multirotor platforms. This study proposes a comprehensive machine-learning framework for rotor fault detection, isolation, and severity prediction using real flight data. A convolutional neural network (CNN) architecture is developed to learn spatio-temporal patterns from multivariate flight dynamics, enabling direct inference of both the faulted rotor and its damage level. The framework is first validated using simulated data generated by a data-generative model, and experimental validation is then performed on a hexacopter by introducing controlled blade-tip breakage. The trained model achieves rotor-wise fault classification accuracies above 99% and severity estimation accuracy of 96% within a 1% tolerance in experimental data, demonstrating strong generalization and supporting real-time health monitoring for autonomous VTOL systems.

0.36

Precision Cotton Disease Management: Leveraging UAV Imagery and Custom YOLO Deep Learning Framework for Enhanced Detection

cs.CV ·2026-10-16 ·1. Anwar Iqbal*1 aiqbal. rime23smme@student. nust. edu. pk 2. Kunwar Faraz Ahmad Khan1 kunwar. faraz@smme. nust. edu. pk 3. Shahbaz Khan1 shahbaz. khan@smme. nust. edu. pk 4. Khawaja Fahad Iqbal1 fahad. iqbal@smme. nust. edu. pk 5. Sara Ali1, 2 sara. baber@smme. nust. edu. pk 6. Saqib Nazir1 saqib. nazir@smme. nust. edu. pk 7. Muhammad Azhar Javed3 muhammadazhar6231@gmail. com 1 Department of Robotics, Artificial Intelligence, SMME, National University of Science +9 more
similarity 0.64
Abstract

Cotton sustains the textile economies of over 80 countries with an annual yield of 113 million bales, yet 30-60% of yield losses are still attributed to viral, bacterial, and fungal diseases that remain undetected until manual field scouting. To address this critical issue, the integration of Unmanned Aerial Vehicle (UAV) imagery with deep learning offers a scalable early-warning system; however, existing models suffer from low early-stage accuracy, poor transferability, and high computational cost. In this paper, we propose Cotton-Vision, a fully convolutional single-stage detector that synergizes three lightweight architectural innovations: Ghost Bottleneck modules for a 20% parameter reduction, Efficient Channel Attention (ECA) for adaptive feature recalibration, and Cross-Stage Partial (CSP) fusion for enriched gradient flow. The network is trained on a novel dataset collected across seven cotton fields in the Punjab province of Pakistan, comprising over 2,700 high-resolution drone images. Extensive data augmentation (rotation, shear, exposure, and saturation) expands the dataset to 11,704 training samples. On a held-out test set, Cotton-Vision achieves a precision of 97.7%, a recall of 77.7%, an mAP@50 of 85.6%, and an mAP@50-95 of 76.6%. These results represent a 10-20% improvement in precision, recall, and mAP over state-of-the-art baselines, including YOLOv5, YOLOv8, YOLOv11, YOLOv12, RT-DETR, and RF-DETR. Through a comprehensive ablation study, we demonstrate that each proposed architectural enhancement contributes to the model's superior performance, yielding a 12-16% mAP improvement over the baseline architecture. Our findings confirm that this synergy of lightweight and attention-based modules provides a robust, computationally viable solution for early cotton disease detection.

0.21

Lowering the Barrier to AI-Driven Inspection: A No-Code Workflow for Automated Structural Defect Detection

cs.CV cs.LGeess.IV ·2026-08-25 ·Michael Holm, Tanner McElroy, Xinghang Zhang, Guang Lin
publishedcode/data similarity 0.64
Abstract · 11 pages, 7 figures. Accepted to ASME SMASIS 2026 (paper SMASIS2026-190654). Software available at https://github.com/michaelholm6/YOLOEZ

Structural health monitoring (SHM) is essential in modern engineering, providing data for condition-based maintenance, lifecycle assessment, and predictive decision-making. Traditionally, SHM relied on visual inspection to detect defects such as cracks and deformations. Early computer vision (CV) methods, including thresholding, edge detection, and handcrafted features, aimed to automate this process but were highly sensitive to noise, imaging variations, and multiscale defects, limiting their reliability. Recent advances in machine learning, particularly convolutional neural networks (CNNs) and You Only Look Once (YOLO), have improved defect detection accuracy and enabled real-time analysis. However, adoption in SHM remains limited due to technical barriers such as data labeling, model training, and deployment, which typically require programming expertise. To address this gap, we introduce YOLOEZ, an open-source, GUI-based tool for end-to-end YOLO model application. YOLOEZ integrates data labeling, training, and inference into a single interface, enabling high-performance model development without code while supporting reproducible workflows. Evaluation against existing software and classical image processing demonstrates that YOLOEZ not only outperforms traditional methods across most detection metrics, but also lowers adoption barriers present in other modern CV tools. By combining accuracy with accessibility, YOLOEZ facilitates wider use of AI-driven monitoring for predictive maintenance, digital twins, and intelligent structural systems.

0.42

Revisiting the Task of Building Damage Assessment by Satellite Imaging

cs.CV ·2026-10-09 ·Anthony Cioppa, Virgile Blua, Sébastien Piérard, Pietro Ceccato, Marc Van Droogenbroeck
hot direction similarity 0.63
Abstract · 82 pages, 2 figures, 9 tables, 160 references

Natural disasters such as earthquakes, tropical storms, and floods cause extensive damage to buildings, and rapid, reliable damage maps are essential to guide emergency response. Automating this task, referred to as building damage assessment (BDA), from satellite imagery, has become an active research topic at the intersection of remote sensing, computer vision, and machine learning, particularly since supervised deep learning methods were shown to outperform earlier handcrafted approaches. Yet, despite a decade of intense activity and the release of several large-scale datasets, the field lacks a shared foundation. This chapter revisits the task of BDA from first principles, organized around three pillars: data, evaluation, and methods. We first clarify the candidate task for- mulations and argue for a sensor-agnostic, instance-based definition that tolerates missing pre-event imagery. We then review existing datasets along the axes of sensing modality, temporal configuration, and geographic coverage. On the evaluation side, we show that prevailing practices, largely based on a single aggregate score, are theoretically fragile, and we lay the foundations of a more informative, ranking-based, multi-score protocol. We further review methods ranging from task-specific deep networks to recent Earth observation foundation models, noticing that generalization to unseen events and regions remains an open difficulty. Finally, we discuss how these elements can inform the organization of a BDA challenge, including cross-validation, challenge, and private data-sharing setups designed to build trust between developers and users.

0.31

From Pixels to Semantics: Edge AI for UAV-Based Critical Infrastructure Inspection

cs.DC ·2026-09-16 ·Reza Farahani, Naser Hossein Motlagh, Zoha Azimi, Christian Timmerer, Lorenzo Carnevale +2 more
similarity 0.62
Abstract · 8 pages, 3 figures, 2 tables, Sumbitted to IEEE Internet Computing 2026

Critical infrastructure assets such as bridges, tunnels, dams, and power line networks require timely and scalable inspection. While conventional manual inspection remains costly and hazardous, unmanned aerial vehicle (UAV)-based inspection has emerged as an efficient alternative for monitoring difficult-to-access structures. Existing UAV inspection pipelines have evolved from cloud-centric offline processing toward edge-based perception using lightweight object detectors such as YOLO for real- time defect localization. This article explores the transition toward fully edge-native semantic inspection powered by lightweight vision language models (VLMs), where UAVs move beyond object detection toward contextual structural understanding. It categorizes existing UAV inspection architectures, identifies their key system challenges and architectural requirements, and experimentally assesses the feasibility of semantic edge intelligence on NVIDIA Jetson UAV-class hardware using the COCO-Bridge dataset. The evaluation integrates a fine-tuned YOLO-26M for object localization and a lightweight SmolVLM-256 for semantic reasoning. Finally, it outlines future directions toward agentic, autonomous, trustworthy, and collaborative semantic UAV inspection across the edge-cloud continuum.

0.21

GeoAI-based post-segmentation quality validation of building footprints via spatial feature engineering

cs.CV ·2026-08-10 ·Shah Imran Ahsan Chowdhury, Kazi Jihadur Rashid, Rajsree Das Tuli, Rahul Saha, Bulbul Ahammad
similarity 0.62
Abstract · 19 pages, 10 figures, 8 tables

Deep learning-based building footprint extraction from high-resolution imagery often produces topologically inconsistent vectors unfit for direct GIS database ingestion. To address this, we present a multidomain GeoAI quality control framework that automates error detection to systematically purify vector footprint databases. Candidate footprints were generated across five UAV survey sites in Bangladesh using U-Net (ResNet-34) and SAM-LoRA (ViT-B). The extracted raster masks were vectorized, geometrically regularized, and consolidated under a spatial-exclusivity constraint to eliminate duplicate representations. We used twenty-four predictors capturing geometric, spatial-contextual, and raster-derived spectral and texture properties. Machine Learning (ML) classifiers were trained on a development partition (Sites B-D) and rigorously validated on a spatially independent test set (Site E) excluded from hyperparameter tuning and class balancing. The experimental results demonstrate that geometric and spatial-contextual predictors using Decision Tree (DT) provide the most effective discriminatory evidence for identifying object-level boundary deformations. DT achieved an accuracy of 95.31%, an F1-score of 91.06%, and a Matthews correlation coefficient (MCC) of 0.880 on the unseen testing site. At the database level, this framework successfully identified 87.34% of erroneous footprints while maintaining 98.31% of acceptable structures, reducing the residual error proportion from 27.32% to 4.62% and improving final database purity to 95.38%. This translates into a relative error reduction of 83.09%. The findings indicate that post-segmentation object-level ML provides a highly transferable, robust mechanism for automated quality assurance in production-ready geographic information system (GIS) workflows.

0.10

Deep Learning-Based Detection of Electrical Faults and Power Quality Disturbances in Aerospace Power Systems

eess.SP cs.LGeess.SY ·2026-09-09 ·Ian C. Guzmán, Radu Babiceanu, Berker Peköz
top venuecode/data similarity 0.62
Abstract · Accepted for publication in IEEE Transactions on Aerospace and Electronic Systems. Pending journal reference/external DOI

More Electric Aircraft require fast and reliable monitoring of high-frequency electrical networks, yet most power quality disturbance and fault diagnosis methods are developed for conventional 50 or 60 Hz grids. This work presents a hardware-aware deep learning framework for multiclass detection of electrical faults and power quality disturbances in a 400 Hz aerospace power system. A high-fidelity simulation model inspired by the Boeing 787 electrical architecture generates voltage and current waveforms for 21 normal, disturbance, switching, open-circuit, and short-circuit conditions. Two datasets, each containing 73,500 samples, are formed from one-dimensional time-series signals and short-time Fourier transform time-frequency representations. Signal-processing augmentation, domain randomization, and class-specific generative adversarial networks increase waveform diversity, and the time-series dataset is released through IEEE DataPort. We compare 1D and 2D convolutional neural networks, long short-term memory networks, CNN-LSTM hybrids, ResNet, MobileNet, and VGG models under common training conditions. A compact ResNet provides the best accuracy-complexity tradeoff, achieving 96.94 percent software test accuracy with 175,685 parameters. After 8-bit quantization and deployment on a Xilinx Zynq UltraScale Plus MPSoC ZCU102, the model achieves 95.87 percent accuracy and a measured mean neural-network accelerator latency of 6.90 ms per input record. The results establish simulation-based, accelerator-level feasibility for embedded edge AI in aircraft electrical health monitoring and motivate future end-to-end data acquisition and experimental validation.

0.52