CS Paper Radar

A Machine Learning Framework for Fault Detection, Isolation, and Severity Prediction of Autonomous VTOL Aircraft

Ripon C. Sarker, Pedram H. Dabaghian, Raman Goyal, Atanu Halder

cs.LG ·submitted 2026-09-12 23:03 UTC · v1
published

Abstract

Fault detection in autonomous VTOL aircraft is critical because even minor component degradations can rapidly destabilize multirotor vehicles operating in complex, safety-critical environments, motivating robust fault detection and estimation strategies capable of identifying early signs of rotor damage; however, real-flight fault detection remains challenging due to sensor noise, environmental disturbances, and the nonlinear aerodynamics of multirotor platforms. This study proposes a comprehensive machine-learning framework for rotor fault detection, isolation, and severity prediction using real flight data. A convolutional neural network (CNN) architecture is developed to learn spatio-temporal patterns from multivariate flight dynamics, enabling direct inference of both the faulted rotor and its damage level. The framework is first validated using simulated data generated by a data-generative model, and experimental validation is then performed on a hexacopter by introducing controlled blade-tip breakage. The trained model achieves rotor-wise fault classification accuracies above 99% and severity estimation accuracy of 96% within a 1% tolerance in experimental data, demonstrating strong generalization and supporting real-time health monitoring for autonomous VTOL systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Unsupervised Maneuver-Aware Acoustic Fault Detection for Autonomous Drones

cs.SD eess.SY ·2026-10-07 ·Ali M Ali, Ziyi Tang, Nurdaulet Nazarbay, Hashim A. Hashim
top venue similarity 0.67
Abstract

This paper presents a maneuver-aware acoustic fault detection framework for autonomous drones that integrates Noise2Noise-inspired deep learning denoising with maneuver-conditioned reconstruction. A key practical constraint motivating this work is that labeled faulty-flight data are difficult and potentially unsafe to collect; the proposed framework therefore follows an unsupervised learning paradigm in which only nominal flight recordings are required for training. In flight environments, acoustic signals acquired from unmanned aerial vehicles are subject to variability arising both from environmental noise and from structured, maneuver-dependent aerodynamic effects. To address these challenges simultaneously, a two-stage learning architecture is developed. In the first stage, a Noise2Noise-inspired denoising model attenuates stochastic acoustic noise while preserving fault-relevant spectral-temporal structures, without requiring clean reference signals. In the second stage, a maneuver-Conditioned Convolutional AutoEncoder (maneuver-CCAE) is trained using maneuver-related labels including drone type and flight direction to model nominal acoustic behavior under varying operating conditions. Fault detection is subsequently performed using reconstruction error as an anomaly score. Experimental results demonstrate that the proposed maneuver-aware conditioning raises the area under the ROC curve (AUC) from $\AUCaeOnly$ (unconditioned baseline) to $\AUCfull$ (full model), validating the critical role of maneuver-dependent modeling. The complete framework is deployed on an NVIDIA Jetson Orin Nano Super embedded platform within a ROS2 pipeline, achieving an end-to-end fault detection latency of approximately $20\,\text{ms}$ per audio segment with a TensorRT half-precision (FP16) backend, confirming real-time viability for onboard UAV health monitoring.

0.37

TileNet: Tile-Based CNN-SVM Architecture for Autonomous Unmanned Aerial Systems Inspection of Flat Roofs

cs.CV cs.AI ·2026-09-11 ·Samuel Dunthorne, Hashim A. Hashim
published similarity 0.66
Abstract · Journal of Safety Science and Resilience

Flat roofs are among the most influential components of the building envelope, governing both structural performance and thermal efficiency, and thereby contributing directly to household energy consumption, carbon emissions, and long-term environmental sustainability. Timely detection of roof defects is essential for reducing heating and cooling losses, preventing moisture-driven degradation such as mold growth, and supporting national climate-change mitigation goals. This paper presents a real-time, Unmanned Aerial System (UAS)-based deep learning framework that autonomously detects defects using live imagery captured during dual-altitude aerial passes. The multi-resolution flight strategy is designed to aid the identification of both small, fine-scale defects and larger structural issues, enabling more comprehensive assessments. To meet the strict computational and power constraints of embedded UAS hardware, the proposed framework integrates a tile-based architecture with a lightweight Convolution Neural Network-Support Vector Machine (CNN-SVM) classifier designed for low-latency onboard inference. The final model-comprising five convolutional layers and four dense layers, the last a linear SVM head, achieved a mean test accuracy of $94.4\%$ ($95\%$ confidence interval $\pm0.4\%$ over three seeds) on a photo-level split ($43,383$ training, $3,869$ validation, and $2,540$ test tiled and augmented images), outperforming GoogLeNet ($89.2\%$) and AlexNet ($79.8\%$). Experimental evaluations using real UAS imagery collected by onsite visits with DJI Matrice 350 RTK drone demonstrate that the system supports rapid, repeatable, and safe roof inspections while reducing human risk, lowering operational costs, and enabling more sustainable building maintenance.

0.64

TGTV: An Interpretable Framework for UAV Fault Detection and Traceability via Spatiotemporal Graph Learning and Large Language Models

cs.LG ·2026-10-28 ·Zixuan Wang, Changbo Shi, Ji Liu
similarity 0.65
Abstract · 21 pages, 8 figures, 4 tables. Submitted to IEEE Sensors Journal

Fixed-wing unmanned aerial vehicles experience operating-condition transitions, asynchronous sensor sampling, and control-system compensation that can obscure fault signatures. Existing temporal detection methods have limited capacity to represent coupled faults across subsystems, track their evolution, and constrain language-model diagnoses with quantitative evidence. This paper proposes TGTV, an interpretable fault detection and traceability framework that integrates spatiotemporal graph learning with a large language model. A temporal convolutional network and a graph attention network with weighted fused adjacency extract multiscale temporal patterns and spatial dependencies among sensors. A hybrid temporal Transformer and variational autoencoder then evaluates window-level anomalies using prediction errors and reconstruction probabilities. Continuous-time Shapley attribution identifies critical sensors and high-contribution intervals while preserving the temporal continuity of fault evolution. A structured evidence package combines detection results, graph relationships, temporal attribution, sensor attribution, and operating context. An evidence-constrained diagnosis protocol uses this package to generate flight-level conclusions with traceable evidence identifiers. Cross-flight holdout experiments on the public ALFA fixed-wing flight dataset yield a window-level area under the precision-recall curve of 0.976, accuracy of 0.973, recall of 0.902, and F1 score of 0.920. Flight-level fault diagnosis achieves recall of 0.943 and an F1 score of 0.944. These results demonstrate accurate anomaly detection and quantitatively supported fault-tracing cues, providing a basis for interpretable post-flight fault review and analysis.

0.25

Deep Learning-Based Detection of Electrical Faults and Power Quality Disturbances in Aerospace Power Systems

eess.SP cs.LGeess.SY ·2026-09-09 ·Ian C. Guzmán, Radu Babiceanu, Berker Peköz
top venuecode/data similarity 0.65
Abstract · Accepted for publication in IEEE Transactions on Aerospace and Electronic Systems. Pending journal reference/external DOI

More Electric Aircraft require fast and reliable monitoring of high-frequency electrical networks, yet most power quality disturbance and fault diagnosis methods are developed for conventional 50 or 60 Hz grids. This work presents a hardware-aware deep learning framework for multiclass detection of electrical faults and power quality disturbances in a 400 Hz aerospace power system. A high-fidelity simulation model inspired by the Boeing 787 electrical architecture generates voltage and current waveforms for 21 normal, disturbance, switching, open-circuit, and short-circuit conditions. Two datasets, each containing 73,500 samples, are formed from one-dimensional time-series signals and short-time Fourier transform time-frequency representations. Signal-processing augmentation, domain randomization, and class-specific generative adversarial networks increase waveform diversity, and the time-series dataset is released through IEEE DataPort. We compare 1D and 2D convolutional neural networks, long short-term memory networks, CNN-LSTM hybrids, ResNet, MobileNet, and VGG models under common training conditions. A compact ResNet provides the best accuracy-complexity tradeoff, achieving 96.94 percent software test accuracy with 175,685 parameters. After 8-bit quantization and deployment on a Xilinx Zynq UltraScale Plus MPSoC ZCU102, the model achieves 95.87 percent accuracy and a measured mean neural-network accelerator latency of 6.90 ms per input record. The results establish simulation-based, accelerator-level feasibility for embedded edge AI in aircraft electrical health monitoring and motivate future end-to-end data acquisition and experimental validation.

0.52

Physical-Variable-Informed Deep Learning for Robust Diagnosis in Industrial Fluid Transport Systems

cs.LG cs.AI ·2026-10-20 ·Yu Sha, Junqi Tao, Dixin Zhou, Horst Stoecker, Domagoj Vnucec +2 more
similarity 0.60
Abstract · 29 pages, 5 figures

Industrial fluid transport systems are monitored through heterogeneous sensing streams, but robust fault diagnosis remains difficult because response signals vary with operating conditions and differ from physical variables in sampling rate, observation duration and data granularity. To address these challenges, we propose a physical-variable-informed deep learning framework (PhyNet) for robust fault diagnosis under real-world sampling heterogeneity. PhyNet treats physical variables as global operating constraints and response signals as local diagnostic evidence. Its physical-to-response cross-attention mechanism connects sequence-level physical-variable tokens with a learnable global response token, enabling interaction without strict temporal alignment. Across four benchmarks, including three real-world cavitation datasets and one public two-phase-flow dataset, PhyNet achieves the best performance across all evaluated metrics. Class-wise analyses, together with attention and masking analyses, show improved discrimination of ambiguous states and indicate that physical variables meaningfully constrain local response interpretation. These findings demonstrate a deployment-oriented approach to robust diagnosis in heterogeneous industrial environments.

0.33

LaplaceDiag: Fault Diagnosis through Changes in Learned Actuator Effects

cs.AI cs.LG ·2026-11-02 ·Oliver Niggemann
similarity 0.60
Abstract

Identifying faulty components from sensor anomalies is difficult because fault effects can propagate through a plant and different faults can produce similar observations. Detailed component models and labeled fault examples may also be unavailable. We introduce LaplaceDiag, a data-driven method that uses changes in actuator effects to narrow the search for faulty equipment. Actuators act on specific devices and mechanisms, so their changed effects can provide clues to root causes. LaplaceDiag learns a healthy plant model with LaplaceNet, a neural network that operates in Laplace space. It separates nonlinear prediction based on measured history from an explicit matrix that describes how actuator values affect sensor values. Keeping the history predictor fixed allows current actuator effects to be estimated by linear regression without retraining the neural network. Comparison with a healthy reference accounts for estimation uncertainty and normal variation to detect changes and generate actuator-related diagnostic hypotheses. The method supports online and offline diagnosis, providing an intermediate step between anomaly detection and identifying faulty components. We successfully evaluate LaplaceDiag on two datasets.

0.27

One-Cycle Fault Classification and Faulted-Line Identification on the PROTECT-90 Dataset: An Initial Application Benchmark

eess.SY cs.LG ·2026-10-02 ·Emad Abukhousa, Abdulaziz Qwbaiban, Saman Zonouz, A. P. Sakis Meliopoulos
benchmarkcode/data similarity 0.60
Abstract

Open electromagnetic-transient datasets are beginning to make reproducible learning-based protection studies possible, but the practical use of these datasets still requires application-level benchmarks that define timing, sensing, and validation assumptions. This paper presents an initial application benchmark on the recently released PROTECT-90 dataset for two protection-oriented tasks: fault-type classification and discrete faulted-line identification. A compact one-dimensional convolutional neural network (CNN) is evaluated using post-inception windows of 0.25, 0.5, 1, and 2 cycles under strict episode-wise splitting. A non-convolutional multilayer perceptron (MLP) is also trained as an architecture-control baseline. The results show that both tasks are nearly saturated under full observability, with one-cycle test accuracies of 99.84% for fault type and 100.00% for line identification. The main performance variation appears under reduced observability: current-only inputs preserve line identification accuracy at 100.00%, whereas voltage-only inputs reduce line identification accuracy to 53.09% with the CNN and 50.57% with the MLP. This indicates that the limiting factor is measurement information rather than neural architecture. Additional stratified checks show stable performance across topology states and fault-resistance bins, while CPU inference contributes only 0.528 ms to the one-cycle total decision time of 20.53 ms.

0.29

Hybrid Machine Learning for Imbalanced Landing-Phase Safety Event Prediction from Flight Data

cs.LG cs.AI ·2026-11-05 ·Taha Asghar, Bilal Mufti, Syed Qasim Zaheer, Luqman Ahmed
similarity 0.59
Abstract

Landing-phase safety-event prediction requires the detection of rare abnormal approaches within strongly imbalanced multivariate flight data. Capturing coupled temporal behavior while distinguishing event-specific signatures across airport operating contexts remains a central modeling challenge. This study proposes an interpretable hybrid feature-fusion framework for multiclass landing-phase safety-event prediction. A long short-term memory (LSTM) autoencoder trained on nominal flight windows characterizes deviations from routine approach behavior. Its continuous reconstruction-error descriptor is fused with parameter-specific statistical flight-history features and supplied to a class-weighted XGBoost classifier to distinguish Normal, Speed High, Path High, and Flaps Late windows. The framework is evaluated using 53,750 NASA DASHlink approach windows from three arrival airports. Pooled and airport-specific learning strategies are compared alongside component-level benchmarks, repeated pipeline retraining, and feature-attribution analysis. The results demonstrate strong class-balanced detection, with mean macro recall above 0.90 across all airports under repeated partitioning and retraining. Component comparisons establish the importance of class weighting and show that continuous feature fusion outperforms reconstruction-error-only and hard-gate alternatives. Airport-level comparisons reveal benefits from local specialization at the two airports with larger datasets and from pooled training at the airport with the smallest dataset. Feature attributions associate predictions with operationally relevant vertical-path, configuration, speed, and approach-context variables. The framework provides an interpretable approach to rare-event detection and practical guidance for adapting flight-data monitoring models to airport-level data availability.

0.23