CS Paper Radar

Graph-Based Characterization of Vision-Derived Dynamic Modes for Structural Damage Identification

R K B M Rizmi, Khalid Mahmud Labib, Shabbir Ahmed

eess.SY ·submitted 2026-09-09 03:32 UTC · v1
unusual

Abstract

This study presents a graph theoretic framework for characterizing damage-induced changes in the dynamics of a vibrating cantilever beam from non-contact video measurements. Within this approach, dynamics of the beam under healthy and damaged conditions with crack depths of 5, 10, and 13 mm are initially modeled using delay-embedded dynamic mode decomposition (DMD) from vision-based measurements. The resulting mode matrix from DMD is used to construct the adjacency matrix of a graph for this vibrating beam system, and its topological features such as graph connectivity, centrality, two-star statistics, and dyadic configurations are evaluated as damage-sensitive measures. Additionally, different DMD-based spectral and modal measures are evaluated to support the graph theoretic damage assessment. The results show a monotonic reduction in graph connectivity, nodal accessibility, and local organization of the graph with increasing crack depth. A parametric numerical study further validates the decreasing connectivity trend observed experimentally. The results demonstrate that the topological features of the graph derived from the DMD mode matrix provide an interpretable representation of damage-induced changes in the beam dynamics and offer a promising basis for vision-based structural damage identification.

Comment
Under review

Closest papers

Nearest neighbours by meaning across the whole index.

Graph representations of dislocation networks

cs.LG cond-mat.mtrl-sci ·2026-11-06 ·Gaurav Lathiya, Markus Stricker
unusual similarity 0.52
Abstract · 28 pages, 15 figures

The mechanical response of a crystal is governed by the evolving network of dislocations it contains, yet quantitatively linking the `state of that network' to its yield stress remains challenging. Here we represent the dislocation networks obtained from discrete dislocation dynamic simulation as graphs, using five distinct graph representations, characterize each network through a compact set of topological properties, and predict the yield stress from these graph properties and the applied strain rate using a standard random forest model evaluated with strain rate stratified cross-validation. The model predicts the yield stress with $R^2\approx0.86-0.90$ across all box sizes and $R^2\approx0.91-0.94$ for larger box sizes, and this accuracy is consistent across all five representations, indicating that the topology-stress relationship is a robust feature of the graph properties rather than an artefact of any single graph representation. We propose graph topology as a compact and robust route for connecting the microstructural state of a dislocation network to its mechanical response in addition to established variables.

0.30

Topology-Adaptive Seismic Response Prediction of Interconnected Structural Systems Using Reduced Order Model Embedded Graph Neural Network

eess.SP ·2026-10-20 ·Huangbin Liang, Beatriz Moya, Francisco Chinesta, Eleni Chatzi
similarity 0.49
Abstract

Electrical substation equipment is commonly interconnected by busbars and flexible conductors. Such interconnected infrastructures exhibit complex dynamic interactions, where the response of each component is influenced by local structural properties, mechanical coupling, system topology, and transient excitation. High-fidelity FE models can capture some of these effects, but their computational cost limits their use for real-time prediction. Purely data-driven models offer faster inference, yet they struggle to generalize, requiring additional simulations and retraining for each new configuration. This work presents a ROM embedded Graph Neural Network (ROMeGNN) for topology-aware seismic digital twins of interconnected structural systems. The system is represented as a graph, where structural components are treated as nodes and mechanical interconnections as edges. Each high-fidelity component model is first reduced to a reduced-order modal representation, which forms a differentiable dynamics operator within the GNN. Rather than learning the full response directly, the GNN estimates topology-dependent interaction forces that enter the differentiable ROM solver as coupling inputs for modal state advancement. This hybrid formulation preserves the known component-level physics and uses data-driven message passing to learn complex inter-component forces across varying system layouts. The framework is demonstrated on interconnected electrical substation equipment subjected to randomized seismic inputs. It delivers rapid predictions of response quantities relevant to seismic damage assessment while remaining applicable across varying layouts, component combinations, and excitation scenarios. These results highlight the potential of embedding physics within graph learning architectures for real-time, interpretable, topology-adaptive seismic digital twins of interconnected engineering systems.

0.22

Integrated Laser Scanning and Image-Based Topology Optimization Techniques for Detection and Quantification of Visible and Subsurface Structural Defects

cs.CV ·2026-09-01 ·Mehrdad Shafiei Dizaji, Devin Harris
unusual similarity 0.49
Abstract · 9, 5

Reliable characterization of structural defects requires methods capable of resolving both directly observable surface damage and damage that is not visible from the inspected surface. This study presents two complementary non-contact, vision-based approaches for the detection and quantitative characterization of defects in structural components. The first approach employs high-resolution laser scanning to generate three-dimensional (3D) point clouds of damaged steel specimens. Comparative processing of measured and reference point clouds is used to localize damaged regions, quantify geometric loss, and transfer the measured defect geometry to a finite element representation. The second approach combines full-field surface deformation measurements obtained using three-dimensional digital image correlation (3D-DIC) with finite element model updating and topology optimization. In this inverse framework, measured surface response is used to infer subsurface abnormalities through their influence on the spatial distribution of structural response. Experimental steel-beam specimens containing controlled smooth defects and randomly distributed defects are used to evaluate the approaches. Comparisons with milling-based ground-truth measurements demonstrate that both methods can identify and quantify defect geometry, while providing complementary information for visible and subsurface damage assessment. The combined framework establishes a pathway toward high-fidelity, non-contact structural condition assessment and model updating for components with complex and irregular damage.

0.25

Towards a GraphNARX model for structural dynamics

cs.LG ·2026-10-16 ·George Tsialiamanis, Keith Worden
unusual similarity 0.48
Abstract

The current paper introduces the GraphNARX model, a graph-based nonlinear autoregressive exogenous model for structural dynamics. The model is built to account for the geometry of structures and to model dynamic behaviour as the interaction between elements of the structure. Similar to other types of NARX models, GraphNARX is used for system identification. Nodal attributes of the graph encode past displacements and nodal forces, and the output of the model is the next-timestep displacement. The graph formulation of the model allows it to generalise to structures of different dimensions and degrees of freedom. Moreover, because graph-learning is performed locally between the nodes, the GraphNARX model can also learn to infer displacements of nodes for which data are not available, i.e.\ to perform virtual sensing. The proposed model's performance is evaluated in a system-identification framework and a virtual-sensing framework, and achieves good accuracy and exhibits generalisation capabilities to structures of different sizes.

0.23

Evaluation of AI-based Visual Crack Detection in Steel Bridges Using Probability of Detection

cs.CV ·2026-08-18 ·Andrii Kompanets, Finn Michael Sherry, Remco Duits, Davide Leonetti, H. H. Snijder
unusual similarity 0.48
Abstract · Submitted

Bridge structures are regularly inspected for structural damage such as cracks and corrosion in order to ensure public safety and reduce maintenance costs. Much research has been done on automating this process using computer vision methods, which are often evaluated and compared using metrics such as intersection over union, mean average precision, etc. However, predicting the actual effectiveness of an inspection method within the field of structural engineering from these metrics remains challenging. To enable the systematic use of these increasingly popular methods in engineering practice, evaluating the performance of these methods in a way that is compatible with standard engineering approaches is therefore an urgent necessity. We present a new statistical evaluation framework to allow the comparison of computer vision methods with conventional visual inspection for crack detection in steel bridges. The framework is based on probability of detection curves and can account for the influence of image resolution. We apply this evaluation method to the real-world ``Cracks in Steel Bridges'' dataset, which contains annotated images of cracks in bridge structures. The quantification of the probability of detection and its uncertainty enables a practical assessment of the effect of automated methods for damage detection in structural reliability analyses. In turn, this enables the wide-spread use of automated (AI-based) damage detection in safety critical applications. This evaluation method provides evidence that the proposed computer vision approach approach is robust for the crack detection task and can have a high added value as an addition to conventional visual inspection methods.

0.48

A Multimodal Engineering GraphRAG Framework for Post-Wind-Event Building Assessment and Recovery Inference

cs.SE physics.app-ph ·2026-10-20 ·Seyedeh Fatemeh Mirfakhar, Reda Snaiki, Rocio Lilen Segura
similarity 0.48
Abstract

Post-event building assessment requires linking observed physical damage to its consequences for safety, habitability, functionality, and recovery. Yet post-disaster evidence is often heterogeneous, incomplete, and distributed across images and reconnaissance reports, while recovery models typically require structured engineering inputs. This study develops a multimodal engineering Graph Retrieval-Augmented Generation (GraphRAG) framework that connects post-wind-event damage evidence to physical consequences, building-condition states, recovery actions, and downtime. Image- and text-based evidence is transformed into a provenance-preserving, component-level representation distinguishing confirmed damage, explicit negative evidence, unresolved conditions, and temporary measures. Graph-aligned retrieval combines comparable building scenarios with explicit engineering relationships, while compatibility, contradiction, evidence-precedence, and abstention mechanisms constrain inference under partial observability. Recovery actions are derived from supported damage-consequence relationships, and downtime uncertainty is propagated through an action-dependency network using Monte Carlo simulation. The framework is demonstrated for tornado-affected low-rise residential buildings using reconnaissance and image-based evidence. Comparisons with BaselineRAG and Structured Baseline RAG show improved agreement for key building-condition and recovery outcomes, together with traceable engineering reasoning and preserved evidence provenance. Ablation analyses demonstrate the contributions of engineering context, evidence safeguards, and graph-path traversal. The results support transparent, recovery-oriented assessment from incomplete multimodal post-event evidence.

0.24

Structured Learning on Mapper Representations

cs.LG stat.ML ·2026-08-22 ·George Babus, Farzana Nasrin
similarity 0.47
Abstract · 29 pages, 10 figures, and 7 tables

Modern machine learning (ML) methods are highly effective for prediction tasks, but many commonly used representations reduce complex data to fixed dimensional embeddings that may suppress multiscale structural organization. The Mapper algorithm from topological data analysis (TDA) provides a different perspective by decomposing data into overlapping local regions connected through a nerve construction, producing a structured representation that captures geometric organization, local statistical behavior, and relational connectivity simultaneously. In this work, we develop a framework for learning over Mapper induced structured representations. Rather than treating Mapper as a preprocessing step that produces a graph for downstream learning, we treat the full Mapper construction as part of the representation itself. We study mathematical properties of these representations, including invariance under relabeling, a distance functional on the space of Mapper representations, structural complexity of multiscale decompositions, and learning oriented stability under representation perturbations. Experiments on time series and graph classification datasets validate the proposed framework through controlled studies of representation ablation, Mapper parameter sensitivity, and the geometry of the induced representation space. Together, these results demonstrate how the proposed mathematical framework enables systematic comparison, interpretation, and analysis of Mapper representations, providing practical tools for studying representation geometry, structural complexity, and learning stability in learning tasks.

0.19

The Interconnectedness Coefficient: A Semi-Local Graph-Theoretic Measure for Connector Vertices between Cohesive Network Regions

cs.SI math.COq-bio.MN ·2026-09-12 ·Thomas Wiebringhaus
similarity 0.47
Abstract · 18 pages, 7 figures, 2 tables. Ancillary files include a reference Python implementation

The Interconnectedness Coefficient (IC) is a bounded semi-local graph-theoretic node measure designed to identify connector vertices between cohesive network regions. Such connector vertices, also referred to as bridging nodes, may mediate between locally cohesive regions even when they are neither hubs nor themselves highly clustered. The IC preferentially assigns high values to weakly clustered focal vertices whose adjacent vertices remain strongly clustered after exclusion of the focal connection. Candidate vertices are required to have degree at least two. The construction is partition-free, uses information within radius two, and requires no predefined community or module partition. The range and extremal properties of the score are derived analytically. Exact graph families isolate its maximal response to fully cohesive branches, its controlled response to a single cohesion defect, its invariance under a cohesion-free hub extension, and a sharp fragmentation threshold. A separate application to a Human Interactome Map reveals pronounced degree-dependent stabilization of IC values near the network's mean clustering level. This behavior follows directly from the multiplicative definition. If focal clustering tends to zero while mean leave-one-out cohesion in the neighborhood stabilizes, the IC converges to that neighborhood-cohesion level. Among the highly ranked IC vertices are proteins with established interface, scaffold, and adaptor roles in molecular complexes. The IC is therefore positioned as a semi-local connector measure for cohesive network regions.

0.26