CS Paper Radar

Topology-Adaptive Seismic Response Prediction of Interconnected Structural Systems Using Reduced Order Model Embedded Graph Neural Network

Huangbin Liang, Beatriz Moya, Francisco Chinesta, Eleni Chatzi

eess.SP ·submitted 2026-10-20 15:32 UTC · v1

Abstract

Electrical substation equipment is commonly interconnected by busbars and flexible conductors. Such interconnected infrastructures exhibit complex dynamic interactions, where the response of each component is influenced by local structural properties, mechanical coupling, system topology, and transient excitation. High-fidelity FE models can capture some of these effects, but their computational cost limits their use for real-time prediction. Purely data-driven models offer faster inference, yet they struggle to generalize, requiring additional simulations and retraining for each new configuration. This work presents a ROM embedded Graph Neural Network (ROMeGNN) for topology-aware seismic digital twins of interconnected structural systems. The system is represented as a graph, where structural components are treated as nodes and mechanical interconnections as edges. Each high-fidelity component model is first reduced to a reduced-order modal representation, which forms a differentiable dynamics operator within the GNN. Rather than learning the full response directly, the GNN estimates topology-dependent interaction forces that enter the differentiable ROM solver as coupling inputs for modal state advancement. This hybrid formulation preserves the known component-level physics and uses data-driven message passing to learn complex inter-component forces across varying system layouts. The framework is demonstrated on interconnected electrical substation equipment subjected to randomized seismic inputs. It delivers rapid predictions of response quantities relevant to seismic damage assessment while remaining applicable across varying layouts, component combinations, and excitation scenarios. These results highlight the potential of embedding physics within graph learning architectures for real-time, interpretable, topology-adaptive seismic digital twins of interconnected engineering systems.

Closest papers

Nearest neighbours by meaning across the whole index.

A hierarchy of physics-embedded neural operators for structural dynamic surrogate modeling

cs.CE math-phphysics.comp-ph ·2026-11-04 ·Amir Nasrollahi, Mehmet Sefa Orak
similarity 0.60
Abstract

Structural-response surrogates must capture moving resonances, phase changes, and unequal-amplitude transfer channels during optimization or health-state changes. Physics-embedded learning seeks FEA-level accuracy at lower cost by embedding physics in inputs, forward passes, losses, and backpropagation. We propose Modal Rational (MR), mapping structural features to modal quantities for analytical frequency-response reconstruction. The Physics-Guided Modal Operator Network (PGMON) adds bounded frequency, damping, and residual-flexibility corrections. Modal Operator with Structural GELU and Anchored-SIREN Correction (MOSAIC) denotes the bounded spectral-discrepancy framework used here; MOSAIC-MR and MOSAIC-PGMON add such discrepancies. They support finite-dimensional maps and physical decoders for future neural operators; evidence is fixed-topology, not a completed operator comparison. Two 20,000-design populations are studied: an 80 m steel truss tower with variable member areas and attached masses, and a tapered shell beam with ten variable station masses. Archived tests cover ten designs and seven acceleration histories per structure; they are benchmarks, not seismic-design assessments. With 5% reference modal damping, MR, PGMON, and MOSAIC give mean displacement-history errors of 0.73-0.76% for the tower and 0.029-0.116% for the beam, against declared band-limited modal references. Supplied modal frequencies are distinguished from design-only use; unequal parameter counts and training settings are explicit. Error analysis separates learned modal discrepancies, truncation, and excitation weighting, explaining acceleration and difficult-tower limits and risks of blind use. Results support physically structured prediction but limit claims about generalization, computational savings, and added corrections. Next is developing and validating neural operators around these architectures.

0.23

A physics-coupled graph neural operator for mid-plane six-component stress tensor field prediction in concrete penetration

cs.LG ·2026-10-12 ·Wenpu Du, Peng Zhou, Yunlong Xia, Sinuo Xin, Congcong Zhang +3 more
similarity 0.60
Abstract

The penetration-resistant design of concrete structures requires the spatiotemporal evolution of the stress field within the target, whereas in design only the strength grade, the geometry and the projectile parameters are known, and the aggregate arrangement is not. Empirical formulae and scalar-output surrogates serve design screening, and mesoscale finite element models resolve the aggregate-scale response, but one solution cannot cover random aggregate samples at scale, and no framework links mesoscale heterogeneity to field-level prediction. A physics-coupled graph neural operator (PC-GNO) is proposed, which learns in function space the evolution of the mid-plane six-component stress tensor field. The training data are generated by full-scale, aggregate-resolved finite element models and comprise 359 cases at the impact velocities of 100, 135 and 165 m/s, corresponding to compressive strengths of 14, 23 and 48 MPa; the data source is verified by laboratory measurements. The coupling strength of message passing is constructed from the impedance contrast across the material interface, and the update is constrained by spectral normalization. Under the single-step primary setting, the mean accuracy of the three levels is 80.16% (91.45%, 77.80% and 71.22%), i.e. 27.81, 42.46 and 34.16 percentage points above the preceding-frame field of the same window; with 20 664 parameters it exceeds the 87.9% of the best Fourier neural operator configuration (about 812 times as many parameters) and the 71.0% of the closed-form linear regression. The output is the complete six-component tensor field rather than a fixed engineering quantity, so that strength criteria and energy indicators follow from one set of weights. For field-level response prediction in concrete penetration, this result provides a data-driven route, with conditions of applicability defined by the training and the evaluation.

0.06

DeepFEAv2: Deep Learning for Transient Finite Element Analysis Beyond Structured Meshes

cs.LG cs.AIcs.CE ·2026-09-22 ·Georgios Triantafyllou, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis
similarity 0.59
Abstract

Finite Element Analysis (FEA) is widely used for transient mechanical simulations, but its high computational cost limits real-time and high-resolution applications. Deep learning surrogate models can reduce this cost; however, many existing approaches are restricted to steady-state prediction or cannot jointly predict Node- and Element-based Outputs (NEO) over time. The state-of-the-art DeepFEA framework has addressed these issues but remains limited to structured finite element (FE) meshes. To overcome this limitation, this study proposes DeepFEAv2, a deep learning surrogate framework that enables prediction of transient FEA simulations across different FE mesh topologies and element types. The main contributions of DeepFEAv2 are: (a) a module that uses the FE connectivity matrix to organize input features by element and arrange them into an input sequence guided by the mesh topology; (b) a novel neural network architecture designed to process the input sequence and jointly predict NEO over time; and (c) a FEA-informed optimization strategy for regularizing these NEO predictions. DeepFEAv2 was evaluated on structured and unstructured 3D linear elastic datasets, as well as on a pressure-driven aortic valve dataset. DeepFEAv2 achieved R^2 values up to 0.99 and normalized errors as low as 0.38%. Compared with DeepFEA, it achieved up to 38.0% relative increase in R^2 and up to 87.1% reduction in normalized error. DeepFEAv2 also performed inference up to three orders of magnitude faster than traditional FEA. These results demonstrate that DeepFEAv2 can efficiently model transient FEA simulations across increasingly complex FE settings, providing a scalable surrogate framework for transient FEA.

0.31

Towards a GraphNARX model for structural dynamics

cs.LG ·2026-10-16 ·George Tsialiamanis, Keith Worden
unusual similarity 0.56
Abstract

The current paper introduces the GraphNARX model, a graph-based nonlinear autoregressive exogenous model for structural dynamics. The model is built to account for the geometry of structures and to model dynamic behaviour as the interaction between elements of the structure. Similar to other types of NARX models, GraphNARX is used for system identification. Nodal attributes of the graph encode past displacements and nodal forces, and the output of the model is the next-timestep displacement. The graph formulation of the model allows it to generalise to structures of different dimensions and degrees of freedom. Moreover, because graph-learning is performed locally between the nodes, the GraphNARX model can also learn to infer displacements of nodes for which data are not available, i.e.\ to perform virtual sensing. The proposed model's performance is evaluated in a system-identification framework and a virtual-sensing framework, and achieves good accuracy and exhibits generalisation capabilities to structures of different sizes.

0.23

Hierarchical Graph Neural Network for Probabilistic Power Flow with Grid Topology Contingencies

eess.SY cs.GR ·2026-10-09 ·Jinbao Wang, Jun Liu, Shiliang Zhang, Xuehui Ma, Lin Yan +2 more
published similarity 0.56
Abstract

Data-driven surrogates reduce the nonlinear solves required for probabilistic power flow (PPF), but models tied to a fixed bus--branch graph often generalize poorly when outages change electrical coupling. This paper proposes a topology-decomposition-driven hierarchical bidirectional graph neural network (TDD--HBGNN) for PPF under unseen topologies. For each realized topology, the network is decomposed into fundamental topological units (FTUs), dynamically homogeneous voltage clusters (DHVCs), and a core backbone sub-grid (CBSG), with equivalent-admittance representations preserving electrical ports between units. A sensitivity-based linear prior captures the first-order voltage-magnitude and phase-angle response, while the HBGNN learns topology-dependent nonlinear residuals. Impedance- and uncertainty-aware bottom-up aggregation condenses local perturbations, while mode-modulated top-down broadcasting restores system context at buses. We evaluate our approach on the IEEE 118-bus and Polish 2746-bus systems under unseen N--1 and N--2 contingencies against six baseline methods. Compared with these methods, TDD--HBGNN achieves 2.47--4.20-fold lower all-bus phase-angle errors and lower phase-angle errors in every held-out event. Its voltage-magnitude advantage is concentrated near the outaged branches, where paired error ratios reach 1.75--2.58 on the IEEE system and 1.87--1.97 in Polish N--2 events. All system--contingency--baseline comparisons favor TDD--HBGNN in joint voltage--angle error. Moreover, shared hierarchical operators keep the model size at 0.658 million parameters across both grids and yield 0.161--1.793~ms forward latency per probabilistic case. These results demonstrate system-wide angular accuracy, outage-local voltage accuracy, and parameter-efficient scaling across unseen topologies.

0.57

Growth-Inspired Graph Generation and Inverse Design of Mechanical Lattices via Dot Matrices Database Augmentation and GCNN

cs.LG cond-mat.mtrl-sciphysics.app-ph ·2026-09-24 ·Weiyun Xu, Jiamu Liu
unusual similarity 0.55
Abstract

Natural load-bearing and transport networks are not assembled in a single step; they emerge through a temporally ordered process of growth, branching, reinforcement, and loop formation. Inspired by this developmental logic, this work introduces a morphogenetic graph-generation framework for mechanical lattices in which a discrete dot matrix provides potential nodes and the final architecture is created by sequential cross-layer and intra-layer growth. The same rule is visualized in two dimensions as a leaf-vein-like developmental sequence and implemented in three dimensions on a 3x3x3 nodal matrix containing 27 candidate nodes. A dataset of distinct three-dimensional lattices was evaluated by beam-based finite element analysis and represented directly as graphs. A graph convolutional neural network (GCNN) with three graph-convolution layers and dual global pooling learns the topology-property mapping and predicts effective compressive stiffness. Coupling the GCNN surrogate with rapid structural sampling enables inverse design: for a target stiffness of 1000 MPa, the selected design was predicted at 1042.43 MPa and validated by finite element analysis at 1027.49 MPa. Beyond straight members, the framework has also been extended to parameterized horseshoe-shaped curved beams made of nonlinear materials, enabling topology-geometry design toward prescribed deformation shapes. Our work provides a paradigm for augmenting the database of mechanical metamaterials, and the resulting perspective links biological morphogenesis, graph learning, and nonlinear shape programming in a unified generative design framework for architected materials.

0.25

Solving the Elastic Wave Equation with Physics-Informed Neural Networks: A Robust and Critical Assessment

cs.LG ·2026-09-07 ·Davide Staub, Ben Moseley
similarity 0.55
Abstract · Comments: 154 pages, 44 figures. Based on the Master's thesis of Davide Staub, ETH Zurich, March 2024. Original thesis: https://doi.org/10.3…

Physics-Informed Neural Networks (PINNs) have recently emerged as a promising approach for solving Partial Differential Equations (PDEs), offering a meshfree alternative that integrates physical principles into the learning process. This presents a new paradigm compared to traditional discretization methods and purely data-driven machine learning techniques. While promising, PINNs are not a panacea; they inherit challenges such as spectral bias and unstable convergence. Moreover, their potential in seismology remains largely unexplored. In this work, we provide a robust and critical assessment of PINNs for solving the elastic wave equation in seismology. We investigate the performance of PINNs on problems with varying degrees of complexity across various seismic sources and parameter models, from constant to highly heterogeneous settings. A pivotal aspect of our work involves investigating whether embedding physical principles directly into the network architecture enhances convergence and accuracy. We test an extensive range of neural architecture designs, from unrestricted, uninformed PINNs to highly specialized ones. We find that integrating an understanding of wave physics into the network design significantly improves accuracy. For instance, introducing a custom wavelet or plane wave layer, coupled with encoder and decoder layers, consistently yields a relative $L_2$ error approximately half that of the standard PINN, as evidenced across numerous experiments. We further demonstrate that this novel architecture enhances accuracy when applied to the acoustic wave equation, underlying the versatility of our network. Another key contribution of our research is the successful conditioning of PINNs on seismic source locations. This signifies a considerable advancement towards rapid seismic hazard detection and seismic analysis.

0.51

Sequence-to-Sequence Neural Surrogate Modeling of Transient Responses in High-Speed Links with Variable Design Parameters

eess.SP cs.CEcs.LG ·2026-10-16 ·Julian Withöft, Shayan Ghanbari, Werner John, Emre Ecik, Ralf Brüning +1 more
similarity 0.55
Abstract · 12 pages, 13 figures, 5 tables. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without noti…

This paper presents sequence-to-sequence (seq2seq) neural surrogates for high-speed transient response modeling and signal integrity analysis in fixed and variable design parameter spaces. To identify the structural requirements for prediction accuracy, multiple neural architectures were evaluated with respect to different training strategies such as sample-based and unit interval-based, as well as input configurations such as TX-only and TX+RX. For fixed design parameters, feedforward neural networks achieve accuracy comparable to recurrent models while requiring lower computational cost, as the static mapping can be approximated by fully connected and non-sequential representations. Variable design parameters alter the electromagnetic characteristics of the interconnect, which creates parameter-dependent temporal dynamics that require sequence-aware architectures to resolve the evolving interactions within the transient response. The results based on a 14-dimensional variable design parameter scenario show that while autoregressive TX+RX feedback suffers from severe phase drift and error propagation under variable conditions, non-autoregressive TX-only inference leads to stability. To overcome the structural limitations of standard decoders, a recurrent Early Fusion LSTM is proposed, which injects design parameters at the initial encoding stage. This approach achieves superior prediction accuracy, with an RMSE of 31.0 mV and an R2 of 99.51% for transient waveform prediction, an RMSE of 30.7 mV and an R2 of 99.57% for eye-height prediction, and an RMSE of 19.5 ps and an R2 of 99.94% for eye-width prediction. These results demonstrate that neural seq2seq surrogates are accurate for transient response modeling and signal integrity analysis in complex variable design parameter spaces.

0.27